initiator SCSI find update.inf

Similar Questions

• Error message when you try to install Windows Imaging Component ' wic_x64_enu.exe «installation cannot find the file update.inf...» »

  I'm installing MS wic_x64_enu.exe and get the error message: «Setup cannot find the update.inf file needed to update your system» I run SFC.exe and found no errors. I also reinstalled. NET40. and I still get the same error message.
  I am Windows 7 Ultimate SP1 64 bit on a HP PC with an AMD Phenom 9150e Quad Core processor 1.8 GHz and 8.00 GB RAM.
  I worked on it for a few days without result.
  Any help will be much appreciated.

  Giles

  Try this search http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-imaging-component-installation-fails-in-my/a13c1e1d-361e-4601-8fc4-4d416edef853?tab=AllReplies#tabs in the registry.

  Run-->--> look forthis key regedit. Already installed.

  I have encounterd this problem by reinstalling .NET.

• When I run wic_x86_enu.exe on Windows 7 Starter, I meet "Installation cannot find what update.inf file needed to update your system.

  wic_x86_enu.exe

  When I run wic_x86_enu.exe on Windows 7 Starter, I meet "Installation cannot find what update.inf file needed to update your system.

  I had already run the windown update, the problem remains.

  Please help.

  Thank you.

  Hi YongWaiMan,

  You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & see if you can download and run wic_x86_enu.exe.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Hope this information is useful.

• I am using XP but cannot download SP3 because I'm missing update.inf. Where can I get the file?

  When I try to download the SP3 it gives up and tells me update.inf is not found.  When my journal of automatic update checking, I find that he has tried to load the last 15 days.  The computer, I'm trying to trouble was just acquired another person and has not been used for some time.

  Hello JLudlow618,

  Thanks for your post.  Take a look at this article and run the FixIt.  When you're done, restart your computer and try again to install updates.  We can't wait to hear back on your part.

  See you soon

• Can't find META-INF/JacobVersion.properties

  Hello.

  We use forms on Linux x 64 11.1.2.2. Webutil configured and Jacob. Signed Jacob.jar.

  When you try to use START_WORD_APPLICATION, the form is suspended and we see in the console:

  Caused by: java.lang. IllegalStateException: can't find META-INF/JacobVersion. properties using JacobReleaseInfo.class. getClassLoader(). getResourceAsStream()

  to com.jacob.com. JacobReleaseInfo. loadVersionProperties (JacobReleaseInfo.java:55)

  to com.jacob.com. JacobReleaseInfo. getBuildVersion (JacobReleaseInfo.java:91)

  to com.jacob.com.LibraryLoader. getPreferredDLLName (LibraryLoader.java:199)

  to com.jacob.com.LibraryLoader. loadJacobLibrary (LibraryLoader.java:178)

  to. com.jacob.com.ComThread < clinit > (ComThread.java:167)

  ... 32 more

  
  

  Jacob is version 1.14.3

  
  

  Clues? This is a feature that worked on Forms 6i.

  
  

  Thanks in advance
  

  Things to check and consider:

  1. have you copied the Windows of Jacob 1.14.3 libraries (dll) in the appropriate directories (win32 \forms\webutil\ & win64)?  32 bit file goes in \win32 and 64-\win64

  2. make sure that the entries in webutil.cfg to jacob are correct?  The relevant entries should look like to follow.  Correct if necessary.

  1.14.3 - install.syslib.0.0.7.1 = Jacob - x 86 DLL | 102400 | 1.14.3 | true

  1.14.3 - install.syslib.0.1.7.1 = Jacob - x 64 .dll | 117760 | 1.14.3 | true

  3. you generated a webutil.plx of webutil.pll in ORACLE_HOME\forms?  Do not use an old copy of webutil.pll, you should use the one supplied with the installation.

  4. your OLE2 application code must be modified to work with WebUtil at the customer level.  So, that said something like OLE2. CREATE_OBJ should be replaced with CLIENT_OLE2. CREATE_OBJ (and so on for the others)

  5. If your OLE application code uses app: = OLE2. CREATE_OBJ ('Word.Basic'), this code must be updated to a newer standard of Microsoft.  For example: app: = CLIENT_OLE2. CREATE_OBJ ('Word.Application');  Similar may be true for the rest of the code.  You can see the demo of WebUtil available on the product page of forms of OTN here:

  http://www.Oracle.com/technetwork/developer-tools/forms/downloads

  6. and finally, and unrelated to the problem, you cannot use the .ico to your icons/images files.  You must use the web compatible formats such as jpg, gif, etc.  Note the errors in your console that reference failing to get ico files.  In addition, these files should be packed in a pot, the pot must be signed, then copied into the \forms\java directory, then added to the parameter ARCHIVE of formsweb.cfg.  If you hard-coded paths and/or file extensions for these files in your application, those who will have to be changed too.

• Presario cq50: won't find updates

  I just installed windows 7 32 bit with service pack 1 on my presario cq50.  I was running windows update for 2 hours and it will not always find updates.  Y at - it an update that I need to download to fix this or what. Thanks for the help I get.

  Install both of these fixes using method 2 and restart. Should solve the problem.

• HP envy 14-2090eo: Windows Update cannot find updates

  Hi Expert CV.

  Last night I did a clean install with Windows 7 Home Premium 64-bit with service pack 1 included - when that said I only see an update in the updates installed and his Ko 976902. And I also installed the necessary drivers and Trend Micro as my Internet Security - well. For about 12 hours now Windows Update worked without find updates at all, and it continues to operate. I tried to create a firewall rule for C:\Windows\System32\svchost.exe - because I read somewhere that it could be the firewall that was blocking the update - and I tried to run the diagnostic tool for windows update in the Windows Firewall, and he says it has resolved a number of things and then I rebooted the laptop but still no luck.

  I hope one of you can help me on the way of functioning of Windows Update, if any of you have a solution? It would be highly appreciated.

  Also, I must say that I have a laptop of the reserve, where I have for a long time ago also made a clean install with windows 7 Home premium 64-bit, and on that one, it takes a long time to run too, but less that he finds something. So I may have something wrong on two laptops?

  You are the very welcome.

  I install KB3102810 and reboot the PC and then run windows update again.

  That's what the second patch is supposed to take care of...

  Installation and research updates is slow and high utilization of the processor occurs in Windows 7 and Windows Server 2008 R2

  When you install updates using System Center Configuration Manager, the installation takes a long time, and System Center Configuration Manager is overloaded.

• HP 2000-2a22NR laptop PC: "windows update continues without finding updates.

  "windows update runs 'check updates' without find updates" after performing a recovery of factory

  After joining the forum, I went to the page windows web and downloaded IE 11 and update of IE. After that ended, I saw that he was also running a "windows update agent 7.6.7600.320" update after that, windows update found and downloaded updates. at this point, it seems that it is woking properly.

  Thanks for your reply,

  redo876

• Cannot find the .inf to install HP 5600 print server port

  I try to add a server port to print to my printer HP 5600 on Win 7.

  Go to "Properties of the print server" select port and get message 'new port type' print server ' food printer inf to install the port monitor intilation information. »

  Cannot find the INFs on any CD progrm supplied with the printer.

  How can I add a 'print server port' to the printer if my USB Linksys printserver. This print server works fine on my other computers on my home network.

  Finally found how to manage the Linksys. You must set up a TCP/IP port not a port of the print server.

  Link http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=22034

  complete set upward for win 7

  Bob

• Windows Update did not find updates more. The progress of the download stays on 0%...

  I guess that it is a result of http://support.microsoft.com/?kbid=947821.

  I will go back to a system save point and will try to exclude the update above.

  So far I have no idea on the reason of detail.

  Encluded are some of the last line of the windowsupdate.log.

  I hope this helps to find a solution for this error.

  Thank you.

  Maritin.

  2010-10-06 23:11:43:998 944 84 c Agent *.
  2010-10-06 23:11:43:998 944 84 c Agent * START * Agent: finding updates [CallerId = AutomaticUpdates]
  2010-10-06 23:11:43:998 944 84 c Agent *.
  2010-10-06 23:11:43:998 944 84 c Agent * Online = No; Ignore download priority = No
  2010-10-06 23:11:43:998 944 84 c Agent * criteria = "IsInstalled = 0 and DeploymentAction = 'Installation' or IsPresent = 1 and DeploymentAction = 'Uninstall' or IsInstalled = 1 and 'Installation' and = 1 RebootRequired = DeploymentAction or IsInstalled = 0 and DeploymentAction = 'Uninstall' and RebootRequired = 1".
  2010-10-06 23:11:43:998 944 84 c Agent * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} third service
  2010-10-06 23:11:43:998 944 84 c Agent * scope of search = {Machine}
  2010-10-06 23:11:45:682 944 84 c driver matched device MONITOR\ACRAD46 driver
  2010-10-06 23:11:45:682 944 84 c driver status: 0x180600a, ProblemNumber: 00000000
  2010-10-06 23:11:45:682 944 84 c driver matched PCI\VEN_10DE & DEV_03D0 & SUBSYS_75971462 & REV_A2 device driver
  2010-10-06 23:11:45:682 944 84 c driver status: 0x180200a, ProblemNumber: 00000000
  2010-10-06 23:12:15:728 944 84 Agent WARNING: is not Installed, updateId = {39B46F0A-7244-48A6-B795-119AC74009F9} rule.102, hr = 80080005
  2010-10-06 23:13:45:834 944 84 Agent WARNING: is not Installable rule, updateId = {39B46F0A-7244-48A6-B795-119AC74009F9}.102, hr = 80080005
  2010-10-06 23:15:15:941 944 84 Agent WARNING: has no rule Installed, updateId = {28CD3E13-4657-4366-8C54-4B5BF58B0364}.101, hr = 80080005
  2010-10-06 23:15:45:971 944 84 Agent WARNING: is not Installable rule, updateId = {28CD3E13-4657-4366-8C54-4B5BF58B0364}.101, hr = 80080005
  2010-10-06 23:16:46:031 944 84 Agent WARNING: has no rule Installed, updateId = {7E95D1B1-EF28-46BD-9916-92D002A1A8E4}.100, hr = 80080005
  2010-10-06 23:17:46:169 944 84 Agent WARNING: has no rule Installed, updateId = {6FD7678D-D8B5-4443-BA8C-9DF5C9C342D4}.100, hr = 80080005
  2010-10-06 23:18:16:199 944 84 Agent WARNING: is not Installable rule, updateId = {6FD7678D-D8B5-4443-BA8C-9DF5C9C342D4}.100, hr = 80080005
  2010-10-06 23:19:16:259 944 84 Agent WARNING: has no rule Installed, updateId = {59226770-8072-4F44-8153-9E01D40D549F}.100, hr = 80080005
  2010-10-06 23:19:46:289 944 84 Agent WARNING: is not Installable rule, updateId = {59226770-8072-4F44-8153-9E01D40D549F}.100, hr = 80080005
  2010-10-06 23:20:46:350 944 84 Agent WARNING: has no rule Installed, updateId = {C5413C40-6EE8-475E-8A34-2AD72B208926}.100, hr = 80080005
  2010-10-06 23:21:16:380 944 84 Agent WARNING: is not Installable rule, updateId = {C5413C40-6EE8-475E-8A34-2AD72B208926}.100, hr = 80080005
  2010-10-06 23:22:16:455 944 84 Agent WARNING: has no rule Installed, updateId = {78CB53CC-FA47-48A7-A080-B5CE1F5B0C1E}.101, hr = 80080005
  2010-10-06 23:22:46:485 944 84 Agent WARNING: is not Installable rule, updateId = {78CB53CC-FA47-48A7-A080-B5CE1F5B0C1E}.101, hr = 80080005

  Hi MartinSanger,

  You can download and install KB947821 system preparation tool and let us know the result.

  If the previous step fails then that run the Windows update Troubleshooting If you use Windows 7

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  If you use Windows vista, and then run the Microsoft fixit tool that is available in the following Microsoft article to reset Windows Update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Update.inf and crypotographic service error when executing Windows Ipdate service pack.

  Original title:

  Problems with SP1a and SP2 update.inf... Help, please

  Currently the computer that I am trying a SP1 is installed and it won't let me install SP1a or SP2... I have to do before installing SP3... both the SP1a and SP2 gives me an error message on the update.inf and crypotographic service.  Please advise on the procedures of the instalation.  Thank you.

  Hello

  You are able to install some other updates without any problems?

  You can see the steps from the following link and check if it works:

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Let us know if it helps!

• try to install the Windows Imaging Component gives error on update.inf

  I try to install wic_x86_enu_exe it is not install and give the file update.inf error please help

  Hello

  What is the exact error message?
   
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  
  Registry warning
  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
  Check if it helps.

• I started to get a red message box when trying to get updates... "windows cannot find updates" error 80070490

  I started receivine a red message box when trying to get updates... "windows cannot find updates" error 80070490.  I tried this fix only displayed in this field of the error help and have downloaded the fix - it Center, and he is unable to perform the task.  Please let know us what I can do.  Thank you

  Hello

  Please see the following Microsoft KB article:

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates:

  http://support.Microsoft.com/kb/958044

  Warning: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  I hope this helps.

• How can I find updated firmware update for BD on Pavilion 5280t?

  BluRay suddenly won't play BD discs. I think the firmware is old. Where can you find updates for this firmware - is mine 2008 - on the HP site?

  Bob, the reason I said the drive is 4 years of age is based on the release date (October 17, 2009) (s5280t) computer.  However, I read the date wrong earlier.  It's almost 3 years.  Sorry for the mistake.

  I suggest to look at the page of specifications of product for any updates.

• Windows Update ran for hours and can't find updates

  Windows Update ran for hours and can't find updates.  I ran

  http://download.Microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/WindowsUpdateDiagnostic.diagcab

  He said that everything was OK except for error code

  0 X 80070057 (2016-01-17-T-07_07_19P)

  I tried to solve this problem by following the instructions in

  https://support.Microsoft.com/en-us/KB/968003

  After that I ran the Cmd file in this article the diagcab has other errors.

  Windows Update still does not work.

  Smart bits transfer service was working but now it's not even on my list of service

  Is it possible to reinstall the Windows Update software and start again?

  Use the following tutorial to reset Windows updates completely and check if it helps:

  Full updates to reset Windows

  Be sure to run the script as administrator.