InPageCoFire says error d3d9.dll is damaged. How to fix?

Similar Questions

• How can I fix error d3d9.dll

  How can I fix the error d3d9.dll

  Hi Antony,

  1. when exactly did you D3D9. DLL error?

  2 have had any changes made to the computer before the show?

  3. what version of Windows is installed on your computer?

  D3d9.dll problems result in one way or another by a problem with Microsoft DirectX.

  The file d3d9.dll and d3d10_1.dll is one of many files in the DirectX software collection. Because DirectX is used by most Windows-based games and graphics programs advancements, d3d9.dll errors usually only appear when you use these programs.

  Important note: Do not download the file d3d9.dll individually any "DLL download site."

  Note: If you have already downloaded the d3d9.dll in these places to download DLL, remove it from everywhere where put you it and continue with the following steps.

  Step 1:

  Restart your computer if you have not yet.

  D3d9.dll error may be a stroke of luck and a simple restart could clear up completely.

  Note: the latest version of DirectX should be installed no matter if you are on Windows 7, Windows Vista or Windows XP. Installation can include DirectX9 and DirectX10 files but they run side-by-side without problem on all these operating systems.

  Step 2:

  Install the update from the link below and check if the problem is resolved.

  End-user Runtime Web install DirectX
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=2da43d38-DB71-4C1B-bc6a-9b6652cd92a3&displaylang=en

  Step 3:

  I recommend you perform the clean boot.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Step 4:

  System File Checker Scan SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

• What does error Code 0x80072efd HRESULT and how to fix it?

  What does error Code 0x80072efd HRESULT and how to fix it?

  If this error occurs during the update of Windows, see here: http://support.microsoft.com/kb/836941. (0X80072EFD - ERROR_INTERNET_CANNOT_CONNECT). "192GO should be enough for everyone." (of the miniseries "Next generation jokes")

• online banking can't watch cancelled check opening, it says item query not found. How to fix?

  online banking can't watch cancelled check opening, it says item query not found.  How to fix?

  online banking can't watch cancelled check opening, it says item query not found.  How to fix?

  Contact online banking support team. This has nothing to do with the topic of this forum.

• When I download adobe after affects cc 2015 after approximately 87 percent done I get error and stop the download how to fix this?

  When I download adobe after affects cc 2015 after approximately 87 percent done I get error and stop the download how to fix this?

  Hi Giovannil27088677,

  If you're still having trouble installing it, please refer to the following thread Photoshop CC install hangs at 48%

• Updated 13 13.1 PS elements fails. It downloads then U44M1P7 error message is displayed. How to fix?

  Updated 13 13.1 PS elements fails. It downloads then U44M1P7 error message is displayed. How to fix?

  Thank you for your help. The problem has been resolved by Adobe online assistance.

• Using Firefox under Ubuntu, I often get a Javascript error message that says error evalinSandbox: SyntaxError:syntax. How can I fix?

  It happens on most, but not all, pages I visit. After you close the error message, another pops up saying "error: syntax error." Close this window to display the initial error again and the process repeats five or six times. Finally, windows will stop popping up and I'll be able to visit the Web site, but whenever I go to a different Web page error messages again. I've updated Firefox and Ubuntu for the latest versions.

  Hello, this error message is typically caused by the social Fixer addon & can be resolved by updating to the latest version available at http://socialfixer.com/blog/category/releasenotes/

• Registry errors. System hangs. How to fix registry errors?

  How to fix registry errors? The registry errors affect the performance of the pc?
  My windows crashes often. Bases of installed microsoft security update.

  Hello

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes, and displays the information about all crashes in one table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  This utility can be used to check the event log for errors other than a BSOD, many crash
  Events will write to the event log.

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second
  or so from the time of the BSOD for more information on the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that appears
  details of all application crashes occurred in your system. The information breaks down
  is extracted from the .wer files created by the component of Windows Error Reporting (WER)
  the operating system every time that an accident occurred. AppCrashView also allows for the
  easily check the list of accidents to the text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ==================================================================

  These methods can help correct most of the problems of crash.

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

• In Vista, after running SFC Scannow, it shows my Spoolss.dll is corrupted, how to fix this?

  I ran a scan sfc to help determine why my print spooler does not work.  Details of said scan my Spoolss.dll file is corrupt and could not be projected based on because the source file is also corrupt.  How to fix this?

  Hello

  Borrow Vista disc a friend if you can - they are not copy protected - it must be a
  full commercial copy or real OEM for your computer brand and model.

  Other options: (run checkdisk first to make sure corruption is not a problem).

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  and restart SFC/scannow.

  Don't you installed SP1 if not install it.

  If you have installed SP1 do you have SP2 installed or install.

  If you have installed SP2, and then uninstall - reboot - and then reinstall it.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• 'Test latency error' what it means and how to fix it.

  I've tried to do a test of broadbandspeed and in the attempt, I was told, there was error, namely "latency test. -What it means and how to fix it?

  Was it speedtest.net?

  If so, this see from their base of knowledge ( https://support.speedtest.net/entries/21544197-What-does-Latency-Test-Error-mean- ):

  «"Latency Test error" occurs generally when the server has been temporarily interrupted.» We have a server monitoring group that will be contacted periodically servers to verify that they work correctly, but there may be a slight delay before automatically recognize us that the server is down. Please let us know by filing a support ticket specifically identify which server caused the error and try to test it on another server. »

  If it was of speedtest.net, then try another Tester like http://www.zdnet.com/broadband-speedtest/ for example (there well others).

• What is the cod of error 0 x 80240036? How to fix?

  After the system recovery try update error cod happen has windows.

  0 x 80240036 and 0x8024400A

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28
  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure
  http://support.Microsoft.com/kb/875364

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  Ref: http://taurarian.mvps.org/WU_XP/0x80240036_0x8024400A.html

• Recently replaced hard drive and ram, when I tried to activate Windows Vista Home Premium says the code has been used, how to fix this?

  I've recently updated my hard drive and ram, and when I tried to activate Windows Vista Home Premium, but got an error that says that he was already in use. I had used the code until I replaced the hardware, how to activate it on my new equipment?

  You can reactivate your Windows Vista installation by doing the following:

  1. click on the Start button and in the box, type search: slui.exe 4

  2. press the Enter key on your keyboard.

  3 select your country.

  4 follow the instructions for the activation of the telephone (toll-free).

• "Windows Firewall cannot change some of your settings. Error code 0 x 80070424 ' how to fix this?

  I get this error: "firewall Windows cannot change some of your settings. Error code 0 x 80070424"when I try to turn on the Windows Firewall (Windows 7).  I am also unable to start my computer in safe mode.  My computer has been infected by the virus 'Win 7 Security 2012', which is what caused this damage to my system.  The virus also seems to have removed all the system restore points before the infection!  I believe that I have the virus completely deleted.  I used Malwarebytes Anti-Malware, Spybot Search & Destroy, Ad-Aware, Kapersky Virus Removal Tool, antivirus Ati Avira (anti-virus program I was running when my computer has been infected by the virus) & Microsoft Security Essentials.  I ran the Scan SFC, a tool for emergency response Microsoft Support, Microsoft FixIt, ComboFix, & Tweaking.com Windows Repair all-in-One.  Repair Windows Tweaking.com seems to be turned Action Center back, where I now get a message that: "Windows Defender is turned off" & it does not seem to recognize MSE as my anti-virus program.  I need to know how to get Windows Firewall works again & get Action Center working properly again.  My computer has a partition with my Windows Recovery on it, but since I can't start in safe mode, I can not also start the restore partition to do a "repair" install, or even restore to factory settings!  Can anyone help?

  Also, when I use a search engine on internet, I get re-directed to a site that has absolutely NOTHING to do with the result of the research, and I click on... I am not that so that is proof that the virus is not COMPLETELY gone or not.

  Hello

  Make sure that the PC is clean (free from zero rootkit to access before you try this corrected)

  This problem of firewall is commonly found on vista and windows 7 (64 BIT OS)

  Download the two files from the registry

  Windows Firewall - MpsSvc

  BFE - base filtering engine

  Run them and click YES when you receive a UAC prompt

  Restart your PC

  Press Windows key + R and type

  regedit , and then click ok

  Reach

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BFE

  Right click on it -permissions

  Click ADD and type

  Everyone, and then click ok

  Now click on all

  Below, you have the permission for users

  Select full control, and then click ok

  Press Windows key + R and type

  services.msc , and then click ok

  Start the service database and then filtering engine service windows firewall

  If you still get this error

  Windows could not start the Windows Firewall on the local computer. See the event log, if services not windows contact from the seller. Error code 5.

  Download and launch this key

  Shared access

  Click YES when you receive a UAC prompt

  Reach

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SharedAccess

  Right-click on -permissions

  Click Add and type

  Select full control and everyone

  You should be able to start the firewall now

  You can also Miss defender of windows security center, BITS and windows update services

  Download

  Security service center - wscsvc

  Windows Defender -windefend

  BITS - BITS

  Updated Windows - wuauserv

  Run them and click YES when you receive a quick restart, UAC the PC
  

  
  

  Good luck

  * Edit *.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk...

• I can't download my pictures from my camera or from disk. I get an error code. Someone knows how to fix this? The error code is 0 x 80010108

  I can't download my pictures from my camera or from disk.
  I get an error code. Ox80010108
  Any help? Enjoy

  Hello

  1 when you download the pictures?

  I suggest that you put the computer to boot and then try to upload the image, follow step 1 to set the computer to boot.

  How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 http://support.Microsoft.com/kb/929135
  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

• Messenger would not insatall it shows a key error port... How to fix

  When I try to connect to messenger an error generated with yellow sign saying goodbye port key I tried to repair but it doesent work... What do I do >

  Hello

  1 what Messenger are you referring?
  2. What is the exact error message?
  3 you get this error message trying to connect or when trying to install the messenger?

  Please answer the above-mentioned questions and provide more specific information on the issue. This could help us help you better.