input out of range with HDMI to VGA LE1901w

Similar Questions

• How to connect by Satellite L305 to TV with HDMI Cable VGA

  Hello

  I have a Toshiba Satellite L305, running windows vista Home premium.
  I bought a HDMI VGA cable but when I plug my Satellite on my Westinghouse TV I can't get the two to connect.

  Please help me.

  Hello

  You try to connect to laptop (HDMI) to TV (VGA) using an HDMI cable to VGA?
  As far as I know this is possible only if the s for computer laptop HDMI port can be set to analog signal. As much as I know this option is not available in the BIOS or elsewhere.
  So if you want to connect VGA HDMI Digital common so I have to say; It won't work buddy.

  You will need something like HDMI to VGA Converter that converts the digital signal into analog signal.

• HP W2207h: Input out of range Signal - course game

  
  

  Hi, thanks for your response, but I was able to understand the problem with my video card:
  
  I haven't had that one connection port available in my motherboard for my graphics card which was not in fact very close to the motherboard itself, but indirect through my hard drive connection, this means that whenever my computer would be launching a program of high quality like video games, video card would try and use too much power to the connection of the cable and it would not be provided.
  
  I simply made a direct connection between the adapter to the motherboard and put in place an indirect for the HDD connection, this means that the video card would get all of the power required whenever it was necessary and the connection solved alone!

• Dell Latitude E6520 2 separate monitors with HDMI and VGA connection.

  Hello

  Is it possible to connect 2 external monitors to this model and (with the laptop screen) have 3 monitors altogether? Someone set up hardware hes like that before? It works and is ok with this configuration nvidia card?

  Or is it only the opportunity to work with 2 monitors a time?

  Any help would be great.

  Hi all

  I want to give back to the community a 100% working way additional conecting 2 moniors (maybe more even with docking station) and have 3 screens working altogether (2 outside and 1 notebooks).

  3 things are needed:

  -Intel HD graphics driver

  -Nvidia driver

  -Active Optimus in the bios

  (set up in this order: activate optimus, install intel hd, install nvidia)

  Make sure that the drivers are properly installed. Download driver intel hd dells site driver nvidia and the nvidia site.

  As a result, it is possible to assign 1 monitor to the nvidia graphics card and other intel hd grapgics card 2. Then, it looks like this in config nvidia:

  

  This works 100% :)!

  Now, he is trying to connect as much as possible :).

  Hope this help anyone!

• monitor 21.5 Dell ST2220L - no serial number, with random outages with HDMI or VGA cables

  The title pretty much everything said.  Monitor was a Christmas gift bought at Staples, which has a wonderfully short 14 days return policy.  I'm supposed to work with Dell, whose Web site detects that I should just enter the serial number of the device as my service tag (there is no service on this device label).  But I can't talk to someone on the phone or via chat because I don't have a valid serial number to enter.  Please help, someone from Dell that monitors these forums!  This monitor must be returned for warranty repair and I can't reach you otherwise.  Very frustrated right now!

  Avisr, ohaider

  Only 27 "and 30" monitors received a service number. All other monitors would use the Dell order number to organize an exchange of monitor if still under warranty. But based on the other thread, this is seems to be a problem of driver rather than a hardware problem.

  Roll back to the older drivers of 2 440 L seems to help. Avisr, what operating system, you are running with this u2410?

• Monitors flicker and "Input Signal Out of Range"

  Hello!

  I have a Mac Mini (end 2012) 2.3 GHz Intel core i7 running up-to-date El Capitan, with two HP monitors 2071d.

  These monitors have DVI connections. It is connected with Mini DisplayPort to DVI adapter, and the other with HDMI to DVI adapter (provided with the Mac Mini).

  Everything has been fine for a year until this week. Two monitors are:

  (1) intermitantly began flickering of the scrambled images

  (2) flickering intermittently at black or white noise

  (3) intermittently flickering white noise

  (4) the message of the form 'input out of range Signal. 1600 x 900 at 60 Hz settings."

  How is this problem go and come, but rather continues today.

  After research, I tried to start safe mode, but the problem persists.

  I read that put the computer to sleep and then wake up could solve this problem... it worked a

  couple of times, but the issue soon returned.

  I tried to reset several times VRAM/LANDAU and SMC.

  I doubled checked all the connections.

  Under the system of preferences > display (when the image is stable long enough for me to see) everything looks OK. Under the screen of the 'Default display' tab is selected. On the color tab, there are three HP2071d listed (with a selected) in the window display profiles. I've linked by selecting one of the other "HP2071d" listed without noticeable change.

  I also reset both monitors to factory settings via the menu screen of the monitors.

  I also came across this mini Mac EFI Firmware Update 1.7 for flickering on end of 2012 Mac Minis, but when I tried to run I got "this software don't is not supported on your system. Ugh. It turns out that my Mac Mini is already updated to MM61.0106.B0A (2015-002)

  My Information System > Hardware > graphics/display info is:

  Graphics Intel HD 4000:

  Chipset model: Intel HD Graphics 4000

  Type: GPU

  Bus: integrated

  VRAM (dynamic, Max): 1536 MB

  Seller: Intel (0 x 8086)

  Device ID: 0 x 0166

  Revision ID: 0 x 0009

  Exhibition:

  HP W2071d:

  Resolution: 1600 x 900 at 60 Hz

  Per pixel: 32-bit color (ARGB8888)

  Display serial number: 6CM3171PFF

  Mirror: on

  State of the mirror: mirror material

  Online: Yes

  Rotation: support

  HP W2071d:

  Resolution: 1600 x 900 at 60 Hz

  Per pixel: 32-bit color (ARGB8888)

  Display serial number: 6CM3170P31

  Main screen: Yes

  Mirror: on

  State of the mirror: mirror of Master

  Online: Yes

  Rotation: support

  I am of the ideas of what else to check/try.

  Thanks for any assistance that anyone can provide.

  bdcs64 wrote:

  Hello!

  I have a Mac Mini (end 2012) 2.3 GHz Intel core i7 running up-to-date El Capitan, with two HP monitors 2071d.

  These monitors have DVI connections. It is connected with Mini DisplayPort to DVI adapter, and the other with HDMI to DVI adapter (provided with the Mac Mini).

  Quite the same configuration except here, with 2 Samsung S22B310 DVI monitors on an i5 2.5 GHz in late 2012.

  Everything has been fine for a year until this week. Two monitors are:

  (1) intermitantly began flickering of the scrambled images

  (2) flickering intermittently at black or white noise

  (3) intermittently flickering white noise

  (4) the message of the form 'input out of range Signal. 1600 x 900 at 60 Hz settings."

  How is this problem go and come, but rather continues today.

  Both monitors isn't good. Which would lead us to think that the Intel HD 4000 is overheating and the problem is not with any of the adapters or cables. Although, if one of the cards was not internally, it could put additional heat stress on the graphics chip.

  Personally, I will try a few things.

  1. turn off, unplug everything, open the bottom cover and give it a good cleaning to make sure it cools properly.

  https://www.iFixit.com/device/Mac_Mini_Late_2012

  2. try each monitor individually for awhile configurations see if the problem follows the monitor cable adapter installation.

  (I know he'll be a brake after obtaining used monitors to double)

  3. try using > MacFanControl to monitor and help control the temperature of the GPU ITPP.

  http://www.CrystalIDEA.com/Macs-fan-control

  FWIW, I do not use screensavers, but I do a lot of videos as well as some games of light on both my 2010 and 2012 of the Mini and I really believe that MacFanControl has really helped to extend the life of graphics on these two systems.

  I use the control based on the sensors on the sensor of GPU ITPP and configured so that it starts slowly rise in power of the fan above 129' F

  

• HP 2509 b monitor guard displaying "Input Signal Out of Range" and then go to sleep.

  I went on vacation and shutdown my computer for 2 weeks.  My monitor worked great for a month before.  I came home last night and turned on my system this morning.  Now I get a white message in the middle of the screen with "input out of range Signal. Change the settings for 1920 x 1080 at 60 Hz"and then the screen goes to sleep.  I can turn the monitor off, wait a moment and then turn it back on again, but continues to repeat the same thing.  I checked and the screen is already set to 1920 x 1080 at 60 Hz.  I use VGA and have the default positioned like this.  I followed the guide to troubleshooting online for this error, but it did not help.  Can someone tell me please how to fix this?

  Finally, I got this figured out!  Here's what I did.

  Control Panel

  Display

  Parameters

  Advanced

  Intel(r) Graphics Media Accelerator Driver

  Graphics properties

  Display settings

  Expansion of the display

  Chosen at this stage full screen (no border) instead of "maintain proportions"

  As soon as I put this the error screen disappeared!  Can someone explain to me why this adjustment has been around?  I would like to know.

  Thank you all for your help.

• Laptop with HDMI output to a monitor with VGA input?

  I have a pretty new 2011-Dell XPS laptop I want to hang on to my quite old-2005-Dell VGA monitor. I bought a cable that connects them together, but my laptop does not recognize my monitor. Anyone know if a decoder is necessary/useful or if I should give up? Thank you very much.

  HDMI is digital while VGA is analog. So you will need a converter "active." Something like this:
  Conversions technology HDMI to VGA with R/L Audio Converter converter

  You're better off just spending only $121. 03 + $78,96 on a new Dell S2240L which has a HDMI port.

• Error, input signal is out of range on installing Windows 7

  Hello again, I install Windows 7 on my computer of mothers, but when installing, restart the computer, the screen does not work it says input signal out of range can be dis is because the video card is not a driver, we have a disk with driver say but. Help thanks for all this

  I want to thank you to you all. I solved the problem, I just connect the PC to the TV via a cable VGA windows starts normally and I go to control panel and then to the system and security, then the administrator tools, then the configuration system. When the system configuration window opens I go to the page "boot" and click on "basic video" and then apply the settings and then click on "ok" and I restart the computer. When the computer restarts I unplug the TV and plugged VGA on the monitor cable. I expect windows to load and load successfully when all was fine with the monitor. I change the screen resolution to the highest that my monitor supports. And now everything is fine. Thank you.

• clean install of windows XP to input signal out of range

  Hi I recently took my old pc xp out of the dusty closet.
  I discovered that the operating system has been corrupted then decided to do a clean install of windows xp.
  However after that it says press any key to boot from the disk and I press a button, then it went to a screen blank and says on the monitor says "Input Signal out of range at 1280 x 1024 60hrz. change."
  I also did a reset factory monitor and hooked up the old pc to the tv.
  So I would like to know how to solve the problem, any help would be much appreciated.

  Hello

  First you using a discrete graphics card or graphics are integrated with the motherboard? Change BIOS battery (or whatever it is in the BIOS change to any method) will not change anything to do with a graphics card discrete and not likley to do much for either integrated graphics card.

  What it sounds like to me, is that the key to the race to start from the CD is not recognized and that Windows is actually booting from the hard drive with a resolution taken not supported by your monitor. But, being not there, I can't be sure of this so here are some ideas of diagnostic.

  Start the PC without the CD inserted, do you have the same problem?

  The keyboard is correctly connected?

  If a PS/2 keyboard is it plugged into the outlet of PS/2 mouse by mistake (keyboard taken are normally purple, green mouse normally Sockets)?

  Is the keyboard PS/2 or USB? You can try another keyboard ideally with the other type of interface?

  You can get in the setup of the BIOS by the appropriate key combination (usually F2 or DEL but I saw others also, look for the message at startup upwards)? If you can not it would indicate a keyboard problem.

  If you can remove the keyboard as a problem, I would return to my original question on a discrete graphics card. If there is a discreet graphics card, the motherboard is also a graphic? If this is the case, remove the discrete card and try windows set up again. Or even try installing windows with a spare graphics card if you can get your hands on one. Turn off the computer and unplug it from the socket before to remove/replace all internal components.

  Finally, what of the installation CD? Is this the one supplied with the PC? It is the recovery of the real manufacturer CD or CD from Microsoft genuine?

  Tricky

• Problems of range with DVI to HDMI Windows 7 64 bit

  I have a problem that becomes really annoying due to the fact after searching the Internet for two days, I found many people with the problem, but no solution.

  Here's what I have:
  Windows 7 Home Premium 64-bit
  NVIDIA 450 graphics card
  Westinghouse 26 "L2610NW
  I used this system for about 6 months with a dvi connector vga for monitor without any problem whatsoever. A month ago I bought a blueray player so I could watch DVD blueray on my HDTV. Finally got the software that I needed to show the blueray discs and when I loaded one up the program told me I need pass port dvi or hdmi to my graphics card I monitor to view these movies protected against copying.
  I got out my dvi to hdmi cord supplied with the monitor and who has worked on an old system of Vista of mine and plugged. When I rebooted my system the only thing I get on my monitor is an error output. I know what means an error output, and I don't understand why windows trying to push my monitor beyond what it is set to go.
  I have my video card and windows set to operate at 60 Hz, which is pretty much my only option other than 59 hz. I tried both and always out of the error no matter what.
  I have the latest Nvidia drivers for my video card and called Westinghouse and they claim that it is a problem with Windows.
  What gives? I spent a lot of money to watch the bluerays on my PC, and while my system seems to work great, I really need to solve this problem. At this point, I'm willing to sell the thing whole dang and start over with pieces of work verified even if they are smaller than what I'm running now.

  I ended up buying a new monitor and now everything is working properly, and so I have to assume that the problem was in the monitor and probably not windows itself.

  The monitor I bought had no cable so I use cables I used on the old monitor and everything works fine. I can even watch commercial blurays on this system now.

• I am facing a problem with the beep.vi. I have a DAQ program, which acquired the signal and compare it to a threshold value. When a signal is out of range, a Visual and sound alarm has occurred. I use the VI beep.vi to generate the sound.

  I am facing a problem with the beep.vi.  I have a DAQ program, which acquired the signal and compare it to a threshold value. When a signal is out of range, a Visual and sound alarm has occurred. I use the VI beep.vi to generate the sound. Everything works fine except the sound alarm. It gives the table 1 d of type mismatch. I tried to fix this by placing it in a box structure. But it still does not work. If someone could help? Please find attached my VI. Best wishes to all visitors to the Forums of Discussion OR.

  Ihab El-Sayed

  published here: http://forums.ni.com/t5/LabVIEW/Playing-sound-based-on-exceeding-a-threshold-value-1D-array-data/m-p...

• connection to a VGA monitor or projector with HDMI port

  What kind of hardward should I get connect my computer that only has a HDMI port to a monitor or projector that has a VGA connection?

  Hello

  You need a converter HDMI to VGA such as:

  http://www.Jaycar.com.au/productView.asp?ID=AC1638

  Kind regards.

• Satellite A300-1OM - no sound on TV with HDMI

  I have a Toshiba Satellite A300 1OM and also a HD in Toshiba TV with HDMI input ports.

  I recently bought a HDMI cable to HDMI and attached the laptop to the tv and turned the TV to HDMI channel, and the cell phone confirmed making the sound "new device attached".

  However, when I try to use the Fn + F5 and output to the tv, nothing happens. When I choose to use the TV as an external monitor to the tv shows the external display, but only covers the center of the TV, just a little larger than my screen laptop, instead of the full screen, as I had hoped. The sound also remained on the laptop instead of my tv speakers.

  Then I tried the "HDMI output" software that came with the laptop computer, and only got the message "it is only effective when the PC is connected to a TV set that supports HDMI control via the HDMI cable.

  Finally, I tried the graphics options to click with the right button on the desktop and choosing to watch out, and then using the graphic properties that I managed to increase the resolution on TV, until he was almost the entire screen, but not entirely and again the sound only came out of the laptop.

  I'm hoping to be able to watch video files from my laptop HD, but it seems that the video output on my TV is always one notebook quality rather than the HD as I had hoped... I tried to watch "Lost.S05E11.720p.HDTV.x 264 - CTU.mkv" once I have wouldn't finally gone out my laptop to HD TV to a nearly full screen size, but does not recognize the difference between the video on TV and laptop.

  Can anyone help? I have read several other similar posts, I checked the BIOS and is enabled in the HDMI display section, but still could not resolve my problem.

  Thank you!

  Hello

  > I hope to be able to watch my laptop HD video files, but it seems that the video output on my TV is always only quality rather than HD specification
  > does not recognize the difference between the video on TV and laptop.

  Do you know what that means HD quality?
  HD TV supports a maximum resolution of 1280 × 720 px and full HD means that the TV would be able to show HD movies using the resolution of 1920 × 1080.
  A simple old TV supports a resolution of 768 x 576.

  Each screen of the laptop is able to show HD videos in HD quality because the screen supports the same or greater resolution!
  So you will not notice any difference on laptop or HD TV HD quality video game!

  In addition the sound does not come through the speakers of the TV because you didn t, choose the HDMI port as the default audio output (device).

  Check this step by step instruction:
  Click Start
  Parameters
  Control Panel
  Material and audio
  Audio/digital output device (HDMI)
  Click the set as default

• Internet access problem no problems Out Of Range

  Hello

  I have some problems with the computer at the laboratory of computer science at the school.
  I had fixed the elimination of the problems of the range with starting pc mode vga but how to solve this problem, so it can boot normally without pressing f8?
  After that I had signed, I can't access the internet even if the parameters are normal and the other computers connect to the internet.
  Please fix this!

  Hello

  1 did you do changes on the computer before the show?

  2. What is the full error message that you receive on out of range problems?

  Method 1:

  See the site:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Run the fixit in normal mode and check.

  Method 2:

  Check if the problem persists in safe mode with network. If the problem does not persist in SafeMode with network check if the problem persists in the boot.

  Step 1: Safe Mode with networking

  Networking in safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  See the site:

  To start the computer in safe mode

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Step 2: Clean boot

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: To set the computer back to start normally, use the procedure How to configure Windows to use a Normal startup state in the same page.

  Note: If in case you are connected through a wireless connection and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check see topic wireless are turned on (Enabled).