Inputs composite and STR DN840

Similar Questions

• My STR DN840 cannot hold a stream of high quality network

  My STR DN840 cannot hold a 320mbs network stream. The same router is attached to my TV 4K, and it streams HD content with no dropouts. The receiver is unable to maintain a stream of high quality for more than a few minutes. There is another technology of networking on the receiver?

  Continuously on my XBR65HX900A works fine most of the time. The problem is with streaming audio of high quality on the receiver of 840 DN STR. It is connected to my router via a switch that shares with the TV signal and which is in turn connected to my router via ethernet through current domestic. The speed is 8mps.

• Use fault strategies to get the input variable and call a new service.

  Hello

  I have 2 composites that are the answer to the request. If none of these composite gives an error I want to have policies to correct this fault. Is possible to obtain the input of the first variable composite and call a new service with this variable to handle the error?

  Thank you

  Daniel

  I found the solution here:

  With the help of mismanagement in a BPEL process

  Using the method getVariableData to get the variable I want.

  Kind regards

  Daniel

• How do I get the analog input signal and send it to output analog (real time)

  Hello world

  I do a simple task in Visual C++ and I use PCI-6221(37 pin).

  Basically, I want to send the same signal of "analog input" to the "analog output".

  at the same time (or almost), to make real-time application.

  Can someone provide me with sample program please.

  I would be grateful if you could provide me with the great tutorial that explains

  step by step everything about NOR-DAQmx for C/C++ programming.

  Best regards

  Khassan

  This is my code in C++, you can optimize it if that seems too messy. This code reads the analog input signals and exports it through the analog outputs.

  To make this code additional work of the directories include and library directories must be added to OR.

  I hope it helps someone.

  #include
  #include
  #include "NIDAQmx.h".
  #include

  #define DAQmxErrChk (functionCall) {if (DAQmxFailed (error = (functionCall))) {goto error ;}}

  int main (int argc, char * argv [])
  {
  Int32 error = 0;
  TaskHandle taskHandleRead = 0, taskHandleWrite = 0;
  Read Int32 = 0;
  float64 context [1000];
  char errBuffRead [2048] = {'\0'};
  char errBuffWrite [2048] = {'\0'};
  bool32 done = 0;
  Int32 wrote;

  DAQmxErrChk (DAQmxCreateTask("",&taskHandleRead));
  DAQmxErrChk (DAQmxCreateAIVoltageChan(taskHandleRead,"Dev1/ai0","",DAQmx_Val_Cfg_Default,-10.0,10.0,DAQmx_Val_Volts,NULL));
  DAQmxErrChk (DAQmxCfgSampClkTiming(taskHandleRead,"",100.0,DAQmx_Val_Rising,DAQmx_Val_ContSamps,0));
  DAQmxErrChk (DAQmxCreateTask("",&taskHandleWrite));
  DAQmxErrChk (DAQmxCreateAOVoltageChan(taskHandleWrite,"Dev1/ao0","",-10.0,10.0,DAQmx_Val_Volts,NULL));
  DAQmxErrChk (DAQmxCfgSampClkTiming(taskHandleWrite,"ai/SampleClock",100.0,DAQmx_Val_Rising,DAQmx_Val_ContSamps,1000));

  DAQmxErrChk (DAQmxStartTask (taskHandleRead));
  DAQmxErrChk (DAQmxStartTask (taskHandleWrite));

  While (! fact &! _kbhit())

  {

  DAQmxErrChk (DAQmxReadAnalogF64(taskHandleRead,1,10,DAQmx_Val_GroupByScanNumber,dataRead,1000,&read,));

  DAQmxErrChk (DAQmxWriteAnalogF64(taskHandleWrite,read,0,10.0,DAQmx_Val_GroupByChannel,dataRead,&written,));

  }
  _getch();

  Error:
  If (DAQmxFailed (error))

  {
  DAQmxGetExtendedErrorInfo (errBuffRead, 2048);
  DAQmxGetExtendedErrorInfo (errBuffWrite, 2048);
  }
  If (taskHandleRead! = 0)

  {

  DAQmxStopTask (taskHandleRead);
  DAQmxClearTask (taskHandleRead);
  }
  If (taskHandleWrite! = 0)

  {

  DAQmxStopTask (taskHandleWrite);
  DAQmxClearTask (taskHandleWrite);
  }
  If {(DAQmxFailed (error))
  printf ("error DAQmx: %s\n",errBuffRead); ")
  printf ("error DAQmx: %s\n",errBuffWrite); ")
  }
  printf ("end of the program, press the Enter key to quit\n");
  GetChar ();
  return 0;
  }

• What is the relationship of synchronization between the input MUX and the clock to convert DAQmx

  My application requires both long settling for the analog input.  I can slow down the clock to convert in order to increase the interval without but I would like to learn more about the internal synchronization and synchronization between the switching of input MUX and the clock to convert.  Data acquisition is USB-6225.

  Thank you

  Neville

  wet'nwild,

  You have reason in the observation that hold all the impulses of the event happening 180ns after convert rising edge clock, regardless of the period of the clock to convert.

  This is the process:

  1. the clock Convert generates an impulse to start the ADC conversion.

  2. a period of time (in your case, 180ns) after the clock pulse to convert, the complete signal hold impulses. This indicates that the data are "required" by the Active Directory Connector. It is now OK for the MUX switch to the next channel. It is important to note that the ADC conversion is not complete when the pulse hold full occurs.

  3. at this stage, the MUX will pass and the device will wait for the next clock pulse to convert for the start of the next conversion.

  In summary, this means that when you change the period to convert clock signal, the complete signal hold flashed always the same fixed amount of time after the edge of signal clock convert. The complete signal Hold'em is not a good indicator of break-in; the width of the period to convert clock must be waiting time indicator (which looks you determined you're previous posts). A good application for the signal keep complete would be for an application where there is an external multiplexer and the multiplexer needs a signal indicating that it is OK to switch the inputs.

  I hope that helps clear up any uncertainty that you have about how it works!

  Kind regards

  Aaron

• I have a VIA card mother U8668-D and in Device Manager it is said that the "Multimedia Audio Controller", "PCI input device" and "PCI Simple Communications controller" function.

  I have a VIA card mother U8668-D and in Device Manager it is said that the "Multimedia Audio Controller", "PCI input device" and "PCI Simple Communications controller" function. I posted a link to the image below.

  Nevermind, I deleted the image by accident. Oops.

  https://SkyDrive.live.com/redir?RESID=D50158D65A52CBBA! 1928 & authkey =! AKdLQ4hGMOynvnc

  If the manufacturer of the motherboard doesn't provide drivers specific win7 there is none.

  If there is the bit Vista drivers ' appropriate ness, what they would usually work

• Composition and Fullscreen Lightbox?

  Hello

  When I do an album, there is the option for full screen. This option cannot be enabled when I composition and insert a lightbox. I can't even to scale the size of the selected image. Don't forgot something or is simply impossible?

  Greetings

  Lightbox doesn't work mode full-screen. It's only for the slideshow mod. There is no way to make jQuery full screen using standard tools.

• Element input event and oninput

  I'm trying to get a user input to work. I found a code on this forum to create the input field and add it to the stage, that works well.

  I would use the oninput event generated by the input field. I can listen to the event if I use the d.oninput (see code below), but I can't access this.gotoAndStop () from inside the event handler (gives a TypeError). Makes me think that there is a problem with the scope.

  I went back to the documentation of createjs and they suggest dcjs.d. event should do, but I get an error with that too - TypeError: dcjs is not defined. I tried with the onclick event following their example, but who gave the same error.

  I can get around it and the use of an indicator in a timer to check if you need to reset (which is what gotoAndStop (69) fact), but seems a shame.

  The code that creates the element:

  Create the input element

  var d = document.createElement ("input");

  d.style.Visibility = 'hidden ';

  d.style.position = 'absolute ';

  d.style.Left = 0;  defines 'the origin' to (0,0)

  d.style.Top = 0;

  d.setAttribute ("type", "text");

  round = 10;

  d.Height = "80";

  d.ID = 'inputField ';

  d.Value = 5;    Initial value in the input field

  Attach the element of CreateJS stage

  canvas.parentNode.appendChild (d);

  DCJS var is new createjs. DOMElement (d);

  DCJS.x = 55;  element position here

  DCJS.y = 105;

  stage.addChild (dcjs);

  It works, except for the call to this.gotoAndStop (69) creates a TypeError - does not recognize the function

  d.oninput = function() {}

  var entry = Number (d.value);

  If (isNaN (input)) {}

  Alert ("enter a number");

  } else {}

  printNumber();

  this.gotoAndStop (69);

  this.placeHolders (3, 4);

  }

  }

  It does not work - TypeError - does not recognize dcjs.d

  DCJS.d.oninput = function() {}

  Console.log ("Input");

  }

  Try:

  Create the input element

  var d = document.createElement ("input");

  d.style.Visibility = 'hidden ';

  d.style.position = 'absolute ';

  d.style.Left = 0; defines 'the origin' to (0,0)

  d.style.Top = 0;

  d.setAttribute ("type", "text");

  round = 10;

  d.Height = "80";

  d.ID = 'inputField ';

  d.Value = 5; Initial value in the input field

  Attach the element of CreateJS stage

  canvas.parentNode.appendChild (d);

  DCJS var is new createjs. DOMElement (d);

  DCJS.x = 55; element position here

  DCJS.y = 105;

  stage.addChild (dcjs);

  It works, except for the call to this.gotoAndStop (69) creates a TypeError - does not recognize the function

  var tl = this;

  d.oninput = function() {}

  Console.log ('input');

  var entry = Number (d.value);

  If (isNaN (input)) {}

  Alert ("enter a number");

  } else {}

  printNumber();

  tl.gotoAndStop (69);

  this.placeHolders (3, 4);  have not now what it is supposed to do but is probably problematic

  }

  }

  It does not work - TypeError - does not recognize dcjs.d

  /*

  DCJS.d.oninput = function() {}

  Console.log ("Input");

  }

  */

• Keyboard shortcuts for the video Composite and Audio Waveform

  I work in Premiere Pro CS6 on Mac OS 10.10.5. I am constantly switch between views video Composite and Audio Waveform in the Source monitor Panel. To do this, I have to use the mouse to click on the key icon, and then select one of the points just at the top of the context menu. My workflow would be so much faster if there was a keyboard shortcut.

  The official page of default keyboard shortcuts indicates no shortcut for these menu items. Mac OS system preferences > keyboard > shortcuts [shortcuts App] allows me to create shortcuts for application specific menu items, but not for context menus.

  Is there, however, a way that I can tell Premiere Pro CS6 to use a keyboard shortcut for the video Composite and Audio Waveform views?

  You can create your own... If you scroll the list link you to that, there is the Source section of monitor... which has options short keyboard available for your two wishes:

  

  Then, use Cmd / Alt + K to do your editing of the keyboard shorts... Scroll way down to find this section, then create a short. At the bottom, it will tell you if it comes into conflict with one another. Here I come to make Composite video, abbreviated as CC2015.2:

  

  By clicking on the line to the right of the effect you want to order makes these empty lines appear the "x" you will see in this view... click again and you can start typing your proposed short. If your entry on this line is already in use, will appear this very practical warning:

  

  So... do you some useful shorts!

  Neil

• Different plan back color between the composition and rendering after adobe media encoder

  I discovered after effect...

  I have a problem of correspondence between the composition and the final rendering through adobe media encoder

  The color of the background composition of Loire (regardless of color) and always a background BLACK after the adobe media encoder

  

  Despite several manipulations by changing the settings I can't solve the problem.

  A little help would be welcome, thanks

  The composition background color will never surrender.  Hug composition background color will never, not even with the record locator.  The background is transparent and will always be unless you fill it with pixels. Unless you choose a format that supports Alpha channels, Alpha channels will make always black. Media players will always play a movie with a black background with alpha channel. If you want a yellow background, you will need a solid yellow or yellow shape on the bottom of your model layer.

• All windows disappear except Composition and timeline when you drag the time indicator current (CTI)

  All windows disappear except Composition and Windows calendar when you drag the time indicator current (CTI). When I let go of the mouse, all the windows reappear. I'm sure I've accidentally changed a parameter overview, but I can't find where this setting is. I want just all the Windows I normally opened to stay there while I drag the CTI.  Any ideas how to solve this problem?

  I have NVidia Quadro FX 3800, driver version 341.92, which is one of the most recent drivers, but that made me think. In the NVidia Control Panel, I checked manage 3D settings and restored all global and set default settings. Now it does not work properly. I think that I have stayed a while to solve something for a different application, and who touched somehow AE. Thanks for the help!

• I bought the creative cloud composition and downloaded and installed on my computer. I tried to configure Adobe Acrobat 9 Standard, where he asked me my user name, organization, and serial number. They never gave me an option to add previously a U

  I bought the creative cloud composition and downloaded and installed on my computer. I tried to configure Adobe Acrobat 9 Standard, where he asked me my user name, organization, and serial number. They never gave me an option to add a user name or the organization previously, so I don't know what to put in these areas. I am also unable to find my serial number. I have received no email with a serial number in it and the list of products registered in Plans and section of my account page says "you have not saved products. Could - a member of staff if you please advise me about the installation of my product? I need the installation to download a school assignment in the next two days. Thank you in advance.

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <==> NOTE DAYS AND TIME
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• How to add properties or custom compositions and layers attributes

  Hi all

  Would it not possible to add the custom properties to the compositions and layers that our exporter would then be able to deal with?

  
  These would have no visuals in AE but would affect the rendering in our search engine.

  An example of this would be to add a property to a layer to indicate that it is a change password text box.

  All the tracks would be greatly appreciated.

  You can try to use the integrated XMP metadata. I was playing around with it in an old script to store data in the project without resorting to the use of hacks of text layer and it worked fine.

  Two functions - one to write the data:

  setMetadata function (data) {}

  var app.project = proj;

  if(ExternalObject.AdobeXMPScript == undefined) {}

  ExternalObject.AdobeXMPScript = new ExternalObject('lib:AdobeXMPScript');

  }

  Var = new metadata XMPMeta (proj.xmpPacket);

  var schemaNS = XMPMeta.getNamespaceURI ("MyNamespace");

  If (schemaNS == "" |) schemaNS == undefined) {}

  schemaNS = XMPMeta.registerNamespace ("MyNamespace", "MyNamespace");

  }

  try {}

  metaData.setProperty (schemaNS, "MyNamespace:compInQuestion", data.compID);  Suppose that these variables are pre-programmed

  metaData.setProperty (schemaNS, "MyNamespace:layerIndex", data.layerIndex);

  metaData.setProperty (schemaNS, "MyNamespace:dataToStore", data .myData);

  } catch (err) {}

  Alert (Err.ToString ());

  Returns - 1;

  }

  proj.xmpPacket = metaData.serialize ();

  }

  To get the metadata from a script, a function as follows:

  function getMetadata (property) {}

  var app.project = proj;

  if(ExternalObject.AdobeXMPScript == undefined) {}

  ExternalObject.AdobeXMPScript = new ExternalObject('lib:AdobeXMPScript');

  }

  Var = new metadata XMPMeta (proj.xmpPacket);

  var schemaNS = XMPMeta.getNamespaceURI ("MyNamespace");

  If (schemaNS == "" |) schemaNS == undefined) {}

  return undefined;

  }

  var metaValue = metaData.getProperty (schemaNS, real estate);

  {if(!metaValue)}

  return undefined;

  }

  Return metaValue.value;

  }

  Because XMP is an external object, you should be able to access from outside of a script, as in a C++ IO plugin.

  Christian

• Mask of composite and grayscale to switch to Quick Mask mode: problem

  Hello.
  I have a problem with this command: "toggle the mask composite and grayscale in quick mask mode"

  I know that I have to press the tidle "~" to activate it, but I use a keyboard Azerty (Belgium) and I struggle with it.

  The only way I can use the key on my keyboard tidle is to press "Option + n" keys.

  So in Photoshop, I load a channel selection, turn into 'Quick Mask mode' and press "Option-n", but nothing happens.

  If I try with 'Command + Option + n', I open the window for a new document.

  I tried all combinations of keys, but nothing has worked.

  I also tried to change the key for Britain, United States, etc., but it still does not work.

  I use the English version of Photoshop CS6 (subscription) and a keyboard Azerty (Belgium) on a Mac Osx Snow leopard.

  How can I solve this problem?

  
  

  In QM view, click on the eye on the left of the RGB channel thumbnail to do the same thing just by pressing the tilde key.

• Change the duration of the composition and compositions under

  I have a publication with several compositions in it and so on. And I need to extend it, but when I change the duration of the composition above in the project panel doesn't change any of the compositions it contains, is there an easy way to change all the?

  Also, I'm working with a big Photoshop file in AE, with layers, groups, y at - it a way to get AE to update of the initial import, or am I stuck re-import everything to get the new layers, whenever I add?

  For the duration of the things check this: rd: CompSetter. Regarding the update of your stuff - AE retains no info on PSD layers or such structure (for the msot part simply since neither PS nor I care to provide a single layer ID that woulkd allow initially). It's just a one time process with the convenience of the AE, it organizes for you, that's all import. If you need to add several layers, the easiest would be to import the document again as a composition and then copy & paste the missing layers for parts you already have done. Then, you can always remove redundant duplicates of importation and reorganize your project according to the needs...

  Mylenium