Insert a blank CD disc

Similar Questions

• Microsoft Media player error message tells me to insert a blank disc

  original title: Microsoft Media player error message

  I tried to burn music from my playlist on the media player on a blank CD and it tells me to insert a blank disc after that I already have, and then says that the program will start once it recognizes the blank test. How can I get it to work.

  Hello

  Thanks for asking!

  1. who is the operating system installed on your system?

  2. did you of recent changes to the system before the show?

  3. do you get an error message when you try to burn the disc?

  Method:

  Follow the indicated link and follow the steps. Check if it helps.

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Burn a CD or DVD in Windows Media Player: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  Answer with the results, I would be happy to help you further.

• Error: «Please insert a blank disc into the CD drive (E :).» Once Windows Media Player detects a new disc, it will start automatically burning"

  Hi, we are currently running Windows XP SP3.  My daughter tries to download a song from Windows Media Player, she needs for her class dance.  It just download the song bad by accident without problem.  Now she's trying to download the song using the same CD (CD - R80) and it gives sound this error: «Please insert a blank disc in the CD drive (E :).» Once Windows Media Player detects a new disc, it will start automatically burning."  Someone please help.  She needs this to practice his senior dance solo.

  As I understand it, the CD was already burned once, and now she's trying to burn on the same CD again? This is not possible, as the CD - Rs can only be burned once. She will need a new blank CD - R, like the error message.

• error message please insert a blank disc into CD Drive (E :). when burning using WMP 11 in XP

  Original title: error message

  Please help someone

  OK, I tried everthing, I use windows xp

  Last week I updated my windows media player and now I have WMP 11 (sucks). Before I did the new update I could burn c.ds very well. But now I get an error message saying: Please insert a blank disc into CD Drive (E :). Once WMP detects a new disc, it will start automatically hot. I tried so many new CD I stop purchase. So I wait a minute until I see it have detected a blank cd (on the left it shows blank disc then try again, but I can't burn data or audio discs.) I try a few things about fixing the problem as uninstall WMP 11 but it is still on my computer - could someone help me.

  Thanks for the reply

  But who doesn't have everything he has told me that I didn't have a cd/dvd was not able when just before I installed the update WMP 11 he burned cds very well helped. Is there a way I can reinstall my old version?

  ===============================
  The following freeware can be worth a try:

  CDBurnerXP
  http://www.CDBurnerXP.se/
  (works on XP / Vista / 7)

  Download CDBurnerXP
  http://CDBurnerXP.se/download.php

  CDBurnerXP to make Audio disc
  http://CDBurnerXP.se/help/audio/compileaudio

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to burn your photos to the photo gallery Windows Live on a cd/dvd? There used to be an option in the "you have inserted a blank disc, you want Windows to box ' but isn't there more.

  There is not an option on windows live photo gallery to burn photos to a cd/dvd.  When a blank disc is inserted a used screen appears saying "you have inserted a blank disc, what do you want windows to do?"  There will be options like 'create a cd with windows media center', or 'create a DEC using corel photo album 6 ", etc...  Create a cd using windows live photo gallery, but this option is no longer there.

  There is not an option on windows live photo gallery to burn photos to a cd/dvd.  When a blank disc is inserted a used screen appears saying "you have inserted a blank disc, what do you want windows to do?"  There will be options like 'create a cd with windows media center', or 'create a DEC using corel photo album 6 ", etc...  Create a cd using windows live photo gallery, but this option is no longer there.

  =====================================
  Take a look at the following articles:

  Windows Vista-
  Burn pictures or videos to a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-pictures-or-videos-to-a-CD-or-DVD

  Windows Vista-
  How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions John Inzer - MS - MVP - digital media experience

• cannot burn CDs, insert the blank disc rpet

  I continue to insert a blank disc, but it will not burn

  Hello

  I suggest that you follow the steps in these links and check if the problem persists.

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - click on Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

• When I insert a blank CD the message is "insert a blank disc" he does not recognize the empty space and says zero bytes free.

  I have a new desktop computer Dell 9010.  The CD/DVD drive is 16 x DVD-ROM SATA.  When I insert a CD with files it contains with free space, it says that I need more free space.  It does not recognize free space.   (free 0 bytes)

  When I insert a blank disc the message is "Please insert a new disc.  The drive doesn't recognize free space on a disk.  It's the same thing with discs CD - R and CD - RW (52 X and 12 X respectively).

  I have a new desktop computer Dell 9010.  The CD/DVD drive is 16 x DVD-ROM SATA.  When I insert a CD with files it contains with free space, it says that I need more free space.  It does not recognize free space.   (free 0 bytes)

  When I insert a blank disc the message is "Please insert a new disc.  The drive doesn't recognize free space on a disk.  It's the same thing with discs CD - R and CD - RW (52 X and 12 X respectively).

  ====================================
  The following items may be worth a visit:
   
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

  (scroll down and expand the section: "Let me fix it myself")

• Windows backup is in half way through, then guard asks me to insert a blank, then directly on the disc, then put another disc.

  Windows backup does not work correctly. About 3/4 of the way through the backup, it tells me to insert a blank disk I did in the first place, and then write information on it, I already did.

  Also have struggled with nine Explorer since I've updated since the Explorer 8. It keeps closing. and I'm the fake messages.

  I have windows 7.

  Hello.

  To create a backup using the DVD, you will need to use rewritable DVD.  It will not work with the standard DVD.  I suggest using a removable/USB drive instead of DVD.

  Without more information, I can't help with the issue of IE9.

  Concerning

• I can't get my upcoming autoplay when I insert a blank DVD

  I can't get my upcoming autoplay when I insert a blank DVD and my computer does not recongize it the blank DVD at all
  I am trying to burn a DVD, but I get a message please insert writable media compatible with your cd writer or DVD and then select retry.  I use to get AutoPlay appears but it does not work and I refiguared it again according to the instructions and nothing happens as it will be.

  Readable DVD and CD DVD player?

  Have you tried another brand and color DVD and, or, a different type, for example r + R?

  Error message when you try to burn data to a DVD-RAM disc in Windows Media Center in Windows Vista or in Windows Media Player 11: "insert media".
  http://support.Microsoft.com/kb/927814

  You receive an error message "INSERT MEDIA" when you try to use the experience to create a CD/DVD in Microsoft Windows XP Media Center Edition 2005
  http://support.Microsoft.com/kb/909083

  http://www.Google.com.au/search?q=please+insert+writeable+media+that+is+compatible+with+your+CD+or+DVD+recorder%2c&SourceID=IE7&RLS=com.Microsoft:-to the: IE-SearchBox & ie = & oe = & redir_esc = & ei = hdLXS6-RGoz-7AP6oYT8Ag

  Have you checked your settings in the Panel\AutoPlay command?

  Maybe it's just that the DVD player is down, this happens sometimes.  When did it last work?  Was it recent enough to justify the attempt to restore the system?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  You could also try uninstalling the drive through Device Manager, reboot and restore of Windows CE.  Also checked the web site of the manufacturer, there could be articles or patches up there?

  It is a common solution for lack of CD or DVD drives, it may be worth a try if nothing else works?

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

• DVD burner drive ignores the media inserted to Backing Up disc

  I installed the Win7 Home Premium (32 bit) operating system on an HP Desktop running 4 GB of ram. I can't create a system or system repair disc image because the DVD writer (HP 740 b) does not recognize the media disc, I insert the burner when you are prompted.  I insert a blank disc DVD - R new Sony, not formatted on most of the rehearsals, but spent the last three times on a DVD + R Verbatim disk with EXACTLY the same result.  THE NE WILL NOT PREPARE THE DISK, IE DISC FORMATER. WHY?  I welcome your thoughts and suggestions, but request that you read my question before I answer that I have several times and carefully followed the advice of Jack in charge of microsoft.  Thank you. CR

  Hi Creyn,

  ·         What is the exact error message?

  ·         What application you use to burn the DVD?

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

• Satellite P100 locks after inserting the DVD + RW disc

  My P100 crashes after inserting the dvd + rw disc.
  If I turn on the computer with the floppy disk in the drive (in general), it works.
  I use the wrong type of dvd.
  Can you advise?

  Hello

  There are many different models of Satellite P100, and I think that the units were delivered with different drives.
  But if the laptop came with DL reader so it should also could handle the DVD + RW.

  Does happen with different DVD + RW from different manufacturers?
  I think that in the manual you will find a list with tested and compatible media that you can use.
  This list, I found in the user manual on my satellite.

• My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc. What should I do with it?

  My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc and I press F11, 12 > no response, F10 > BIOS Setup. What should I do with it?

  Brand: HP
  Type: laptop
  Model No.: Pavilion zt3000
  512 MB DDR1 RAM
  Thank you very much!

  Hi Dominic,

  Are you able to get into BIOS to make changes?

  If so, you can try to reset the default settings of the BIOS and check.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can also try to remove all external usb devices that can be connected to the system and start-up and see if the system boots.

• HL-DT-ST DVDRAM GH70N will not write to blank DVD discs, but it will read all the OEM and the previous DVD I created.

  When I check the properties of the device there is a message that says: Windows does not start a related device driver. To learn more, click on the driver tab, click Driver Details. Go to the driver tab and Driver Details reveal nothing.  When I try to save a blank DVD disc, the disc spins for a while and then I get a message that the disc is not recordable or it is not present in the drive.  I tried to uninstall the drive and let Win 7 reinstall the disc after that I reload.  I also noticed that the player goes to a CD player when I try to record a DVD disc.

  I have since fixed the problem by using msconfig, I disabled the iTunes program. This solves the problem completely.  I had read somewhere that iTunes can interfere with optical drives.

  Hi, Frank Keller,.

  Glad to know that the problem has been resolved. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• Word RTF Tem [plate - insert a blank line in the loop

  I'm entering my template like this XML data (this is just an example of dumbed down):

  <? XML version = "1.0"? >

  < LABEL_TEST >

  < LIST_G_TEST >

  < G_LABEL_HEADER >

  < NAME > Parent 1 < / NAME >

  < / G_LABEL_HEADER >

  < G_LABEL_HEADER >

  < NAME > Kid 1 < / NAME >

  < / G_LABEL_HEADER >

  < G_LABEL_HEADER >

  < NAME > Parent 2 < / NAME >

  < / G_LABEL_HEADER >

  < G_LABEL_HEADER >

  < NAME > Parent 3 < / NAME >

  < / G_LABEL_HEADER >

  < G_LABEL_HEADER >

  < NAME > 4 Parent < / NAME >

  < / G_LABEL_HEADER >

  < G_LABEL_HEADER >

  < NAME > Kid 4 < / NAME >

  < / G_LABEL_HEADER >

  < / LIST_G_TEST >

  < / LABEL_TEST >

  In summary, I have a list of Parents, and if they have a child, the name of their children is below. Not all parents have children.

  If the data is a bit like this:

  Name of the parent

  Name of the child

  Name of the parent

  Name of the parent

  Name of the parent

  Name of the child

  When I loop data in my RTF model, I want to be able to insert a blank line before all of the lines 'Parent '. A bit like this:

  Name of the parent

  Name of the child

  Name of the parent

  Name of the parent

  Name of the parent

  Name of the child

  I tried to do this by adding an empty xml tag in the list, like this:

  <? XML version = "1.0"? >

  < LABEL_TEST >

  < LIST_G_TEST >

  < G_LABEL_HEADER >

  < NAME > Parent 1 < / NAME >

  < / G_LABEL_HEADER >

  < G_LABEL_HEADER >

  < NAME > Kid 1 < / NAME >

  < / G_LABEL_HEADER >

  < G_LABEL_HEADER >

  < NAME > < / NAME >

  < / G_LABEL_HEADER >

  < G_LABEL_HEADER >

  < NAME > Parent 2 < / NAME >

  < / G_LABEL_HEADER >

  < G_LABEL_HEADER >

  < NAME > < / NAME >

  < / G_LABEL_HEADER >

  < G_LABEL_HEADER >

  < NAME > Parent 3 < / NAME >

  < / G_LABEL_HEADER >

  < G_LABEL_HEADER >

  < NAME > < / NAME >

  < / G_LABEL_HEADER >

  < G_LABEL_HEADER >

  < NAME > 4 Parent < / NAME >

  < / G_LABEL_HEADER >

  < G_LABEL_HEADER >

  < NAME > Kid 4 < / NAME >

  < / G_LABEL_HEADER >

  < / LIST_G_TEST >

  < / LABEL_TEST >

  But that doesn't seem to work.

  Manny

  I found a solution that works very well.

  I added a new XML field to my data called .  In my model, this field is inserted in the line, but in a location where there is no data being printed. And it is formatted as white text, so that it basically just does not appear.

  So essentially, it's what I have now:

  Parent 1

  .

  Child 1

  .

  .

  Parent 2

  .

  .

  Parent 3

  .

  .

  Mother 4

  .

  Child 4

  .

  If the data is a bit like this:

  The name of the parent.

  The name of the child.

  .

  The name of the parent.

  .

  The name of the parent.

  .

  The name of the parent.

  The name of the child.

  When I loop data in my RTF model, the '. ' is a white text, then I get this:

  Name of the parent

  Name of the child

  Name of the parent

  Name of the parent

  Name of the parent

  Name of the child

• Insert a blank line after each line grouped

  Oracle 11.2.0.1

  Windows XP

  I need to create a table (who have more to exported to the Excel SQL Developer) something like this:

  The user Scott Table Emp

  
  

  create the table temptbl as

  SELECT

  -case when lead (deptno) OVER (ORDER BY deptno) = deptno then empno otherwise null end AS empno.

  -case when lead (deptno) OVER (ORDER BY deptno) = deptno then ename otherwise null end AS ename.

  -case when lead (deptno) OVER (ORDER BY deptno) = deptno then job otherwise null end AS work,

  -case when lead (deptno) OVER (ORDER BY deptno) = deptno then null deptno otherwise end up LIKE deptno

  WCP

  Table created.

  SQL > select * from temptbl;

  EMPNO, ENAME, DEPTNO JOB

  ---------- ---------- --------- ----------

  7782 CLARK MANAGER 10

  PRESIDENT OF 7839 10 KING

  7566 JONES MANAGER 20

  FORD ANALYST 20 7902

  7876 ADAMS CLERK 20

  SMITH CLERK 20 7369

  7521 WARD SALESMAN 30

  7844 TURNER SELLER 30

  7499 ALLEN SALESMAN 30

  EMPNO, ENAME, DEPTNO JOB

  ---------- ---------- --------- ----------

  7900 JAMES CLERK 30

  MANAGER OF 7698 30 BLAKE

  14 selected lines.

  SQL >

  But it is not giving me the last row of deptno.  If I have to display the data on sqlplus then I can use break on jump 1, but since I create my correct query table (around 10 K lines), I just want to insert a blank line after each data grouped.

  Thank you.

  Select empno, ename, job, decode (empno, null, null, deptno) deptno emp

  Group by grouping sets ((empno, ename, job, deptno), deptno)

  /

  EMPNO, ENAME, DEPTNO JOB
  ----- ---------- --------- ----------
  7782 CLARK MANAGER 10
  PRESIDENT OF 7839 10 KING
  7934 MILLER COMMITTED 10

  SMITH CLERK 20 7369
  7566 JONES MANAGER 20
  7782 CLARK MANAGER 20
  SCOTT ANALYST 20 7788
  7876 ADAMS CLERK 20
  FORD ANALYST 20 7902

  7900 JAMES CLERK 30
  7499 ALLEN SALESMAN 30
  7521 WARD SALESMAN 30
  7654 MARTIN SALESMAN 30
  SALESMAN 7698 BLAKE 30
  7782 CLARK MANAGER 30
  7844 TURNER SELLER 30