HL-DT-ST DVDRAM GH70N will not write to blank DVD discs, but it will read all the OEM and the previous DVD I created.

Similar Questions

• Based on file format is not write to file, if there is an error defined by the user?

  While using the function in file to create a text file of some test results, I've noticed that if there is an error format on the error stream VI seems to work fine, but the Format of the file function is not actually write data to the file. I never noticed this behavior in Labview on any another function while if there is an error in this function does not work. As a general rule, if I don't want to run a section of the code when there is a mistake I have to surround themselves with a case statement and run the error stream in the case selector ignore.

  I've noticed this in a test application where I generate set errors when certain failures occur during my test, but I'd like when even the application to write my log file no matter if there is an error of no. In this case if my defined errors occur it does not write a log file. I deliberately to clear all errors before calling my VI of logging that I really don't want to do.

  So my question is why this behavior is present in the Format based on file? If it is expected that behavior are there other features that this happens with that I don't know everything?

  I have attached a VI that illustrates this behavior.

  The vast majority of the functions with an error to not not run if an error is present. In General, if a function runs with an error (i.e. close VISA), noted in the help it works even with a mistake.

• My ORB start does not, he will have all the features and the icon disappear, just to the left of the word it

  My ORB start does not, he will have all the features and the icon disappear, just to the left of the word it

  even using restore window can not solve the problem, I use windows 7 pro, this happen after the update I have install on September 24, 2012

  Hello

  1. What is the KB (Knowledge Base) number associated with the update?

  2. the problem persists only with ORB start?

  Method 1: Make the SFC (System File Checker) scan and see if the problem occurs.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Method 2: Use the Microsoft Safety Scanner in full scan mode and remove all threats that is not detected by it and see if the problem persists.

  Microsoft safety scanner

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.

  Hope this information helps.

• I installed Acrobat DC (upgrade) and it will not be installed. When is request a serial number from the previous it is not accepted. I use 9.0 which doesn't show in the drop-down window. How should I proceed?

  I installed Acrobat DC (upgrade) and it will not be installed. When is request a serial number from the previous it is not accepted. I use 9.0 which doesn't show in the drop-down window. How should I proceed?

  Hi davidm1224,

  I regret that we do not any version upgrade to Acrobat DC of Acrobat 9.

  You can buy the full version of Acrobat DC.

  For more details, please visit: Plans and prices | Adobe Acrobat DC

  Let us know if you encounter any problem.

  Concerning

  Meenakshi Negi

• Keypad lock, when you press the keys, you hear a ding (chime) but it will type all the letters. The mouse still works. When you restart it works fine.

  Keypad lock, when you press the keys, you hear a ding (chime) but it will type all the letters. The mouse still works. When you restart it works fine. It must be a sequence of keys... but I have no idea what it could be. Thank you and God bless you

  Hello
  When exactly the problem occur?
   
  Follow the steps below and check if that helps.
   
  Step 1:
   
  Test the issue in safe mode and check if the keyboard is blocked.
   
  Step 2:
   
  If your computer very well in Safe Mode functions, you can put your system to boot and check if any third party or any service application is causing the problem and therefore the computer to freeze.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you can go ahead and disable or uninstall the same.
   
  Once the system is in a clean boot state, check if the computer continues to block or not.
   
  See the link below for more details:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I downloaded Itunes 12.3.3 and now I tunes does not recognize my Ipad or Iphone. I went through all the procedures and just uninstall and reinstall. Please fix 12.3.3.Thanks.

  I downloaded Itunes 12.3.3 and now I tunes does not recognize my Ipad or Iphone. I went through all the procedures and just uninstall and reinstall. Please fix 12.3.3.Thanks.

  iTunes: fix iPhone or iPod not detected Windows 10

• I start my computer, but only get blue DELL screen. F12 or F2 gets me anywhere, does not. Put system restore disc, but still no luck.

  I start my computer, but only get blue DELL screen.  F12 or F2 gets me anywhere, does not.  Put system restore disc, but still no luck.

  Hello

  It looks like you have a hardware problem

  link below has the dells F12 diagnostics performance, BUT you can't get in this

  http://support.Dell.com/support/eDOCS/systems/WS340/en/UG/DIAGS.htm

  problem with the dell diagnostics the process and the process of recovery dell contact dell

  This is the diagnosis of the valleys and the recovery process not microsofts

  Dell support

  http://support.Dell.com/

  Dell support forums

  http://en.community.Dell.com/support-forums/default.aspx

• Premiere Pro is not read all the video content in my AVCHD video. I know this because my computer plays all content through the Preview, so that the information is on the card. How the first to read all the content?

  Premiere Pro is not read all the video content in my AVCHD video. I know this because my computer plays all content through the Preview, so that the information is on the card. How the first to read all the content?

  The first thing to do is to copy all the contents of your memory card to your computer and then import them into the body using the media browser in the body. Does it work?

• How can I tell my catalog of lightroom that Ive moved my original files on a drive hard new, so it will apply all the settings for photos in the new hard drive

  How can I tell my catalog of lightroom that Ive moved my original files on a drive hard new, so it will apply all the settings for photos in the new hard drive

  Right-click on the folder name and choose the location of the update folder.

  See fig 8 to the attached link:

  http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

• Error: "Windows could not complete the format" when you try to write to blank DVDs

  I get this error when you try to copy files to a blank DVD.  I am trying to drag and drop files into the dvd player and after a small roar, the dvd ram drive stops and the error message.  Then the drive no longer recognizes blank dvd inside.  I am running Vista 32 bit and my dvd ram is a matshita dvd - ram uj880as ata.  I tried to switch to the microsoft 'FixIt' site, but the problem is not resolved.  I think that the report mentioned that the reader could recognize not writable or something to that extent.  The player can play DVDs fine, however.  Is there a solution to this problem by replacing the dvd ram drive?

  Hello

  Have you tried to close all programs and then insert the disc to see what is happening? Try a slower
  speed or mastered format. Have you added any burning new software lately - these tend to compete
  for resources and can interfere with each other.

  Should which CD or DVD format I use?
  http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use

  ====================================

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD have a tolerance + - and you can write on the outside edge.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -----------------------------------------------------------------------

  Try this troubleshooting:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• The new version of Firefox, 18.02, will load all the pages. Why not?

  I tried to open Firefox and I was told that it would when the updates have been applied, which was nothing new. It loaded fine and there is no incompatible Modules, but it won't load any web pages. I'm on the same computer using Chrome to send this message. Everything worked fine in version 18.01.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• Media player 11 will not read all the dvd please help

  I have changed the setting, reinstalled dvd, reinstalled media player, I don't know what other 2

  Hello

  1. which version of the windows operating system is installed in the computer?

  2. have you made any changes to the computer?

  Race fix from the following link and check if the problem persists:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 1

  I suggest delete you the database of Windows Media Player and check if it helps.

  Exit Windows Media Player.

  (a) click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player, and then click OK.

  (b), select all the files in the folder and then click on Delete on the file menu.

  Note: you don't have to remove the folders that are in this folder.

  (c) restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

  Methode2

  If the above does not solve your problem then clear cache of database of Windows Media Player files. To do this, follow these steps:

  (a) output Windows Media Player.

  (b) click Start, click Run, type % LOCALAPPDATA%\Microsoft, and then click OK.

  (c) select the folder Media Player and then click on Delete on the file menu.

  (d) restart Windows Media Player.

  You cannot view, add, or delete items in the library of Windows Media Player 11

  http://support.Microsoft.com/kb/925718

  Method 3: You may need to download the audio effect plug-ins or ability of DVD in Windows Media Player, please visit the link below

  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  Method 4: You can see the steps mentioned in the article below

  Supported decoders MPEG - 2 software DVD in Windows Media Player for Windows XP and Windows Vista

  http://support.Microsoft.com/kb/306331

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• DVD writer does not recognize 'NEW' blank DVD - r (Windows XP)

  Hello

  I have a question that has been annoying me a lot during the last few weeks, as follows...

  I have a Dell Optiplex GX620 computer is running Windows XP service pack 3, it has a cd/DVD burner in this model (HL-DT-ST DVD +-RW GWA4164B), I used to be able to burn CDs and DVDs fine, so please respond with lol 'maybe your drive doesn't burn DVDs' as you can see in the model # it's a DVD +-RW drive.

  But my problem is the following... for some reason the DVD burner does not detect the 'NEW' blank DVD - R, there is no problem of detection of blank CD - R disc and I can burn fine on the CD - R. But for some reason it does not detect blank DVD?

  When I put one in the drive, I don't get the popup asking what I want to do etc, or to go to WORKSTATION and look a the drive it shows no media present.

  I have Nero Platinum 15 installed in my burning software, which has a function of DISK INFORMATION, which also shows that 'no disk in drive '.

  I have re installed Nero...

  I uninstalled the drive and re installed

  Re, I installed the latest drivers for Dell Optiplex

  I bought a second axis of new blank DVDs

  I took out what I left little hair!

  Can someone provide me with a fix for this problem? ANY help is GREATLY appreciated guys!

  Hello

  See if that helps you.

  There is a "Fix - it" Microsoft for your problem on this link

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  If above doesn't fix it, continue with the help of Microsoft:

  http://support.Microsoft.com/kb/982116/en-us

  See you soon.

• AOL will not sign some user accounts. But works very well for the Administrators account.

  AOL 9.6 works very well since XP account administrators but... any other account on the PC when AOL sign on it immeadiately can sign with "AOL had a problem and had to sign. Any ideas? AOL gave a bad scripted reload all the response of the AOL software.

  Thank you

  Hi Splinter1,
   
  Try the steps listed in the article below and check if it helps fix the problem:
  Having trouble accessing the AOL WebMail or AOL Mail based
  If this does not help, contact AOL support better.

• How the tags are stored and then backed up?  Don't want to do all this work if a system failure and the need to start over with saved photos will be all the work of marking saved.  Or IIR/when Lightroom is so more suitable or an option as the next photo p

  Backblaze in particular, but it would be for any backup or future software I guess.

  Tags are stored in the file in your catalog. If you want to have them available after a disk crash, you should make regular, automated backups of your catalog on a different physical disk files. You can enable this in Lightroom via settings-> General-> Backup catalog. Note: you should always take backups of your photos, this feature in Lightroom doesn't have backups of your photos.

  If at some point you consider moving away from Lightroom, you can also write tags to the photos themselves (or in the case of RAW for the XMP sidecar files). This can be done by selecting all the photos and metadata-> saves the metadata of files (Note: this will take a lot of time if you have selected a large number of photos). You can also turn on the option to automatically catalog settings-->--> write metadata changes automatically to XMP. Any tags written via this method is readable by any other photo app that I know.