Insert a space character between any two characters in a string

Similar Questions

• Insert a space character between each character in a string

  I have an array of length variant.  Each element of the array contains a string.  I want to put a space character "" between each character of each string in the array.  The length of the string in each element of the array varies.

  I played with nested for loops with registers to lag and feedback without success and began to think that I do it's too difficult.

  Thank you

  Mike

  (Lucither: your code will make any element of the array to an empty string.) It does not insert space between characters as needed.)

  There are nice solutions already posted above, here's another at random.

  

• Change the width of the [space] character between the words to a police

  Hello

  I used a font called 1790 Royal printing for the client's work:

  https://www.MyFonts.com/fonts/GLC/1790-Royal-printing/buy.html

  .. the police are perfectly kerned character, but the width of the space character (as you can see from the images above) is far too broad. At the moment I am setting width of a [space] which is laborious to say the least, so for example, if the type is set to 30pt, I select a space and change the size to 16pt, copy and then paste to change each space between words to 16pt.

  .. is there a way to set the width of only the character of spacing, or any other solution saving time/work?

  Thank you very much

  In the paragraph Panel, flyout > Justification > wee. Here, you can define a minimum and maximum desired spacing.

• Find/replace a character between 'any number'

  Greetings

  I'm working on a long document in Norwegian that contains many numbers with decimal places, like this: 45.3

  However, in Norwegian, is the correct way of separation of decimals with a comma, like this: 45.3

  What is the best way to find and modify all instances of this?

  I tried a text search using ^ 9. ^ 9 (any digit. any number) who works in a way. The problem changes the results so that I keep the numbers, but change the period to a comma.

  Obviously I can't just look for a period, because they are everywhere...

  Any suggestions would be much appreciated!

  Hey!

  You can do it with GREP find change:

  

  Hope that helps.

  --

  tomaxxi

  http://indisnip.WordPress.com/

• Can anyone tell how to insert a string between the two another string...?

  Can anyone tell how to insert a string between the two another string...?
  For example: String1 = 'ABC '.
  String2 = "XY".
  
  I want that the chain of output like "AXYBC".

  If you have the Position where you want to place your chain, this might work:

  SQL> r
    1  declare
    2    vStr1 varchar2(20) := '123456789';
    3    vStr2 varchar2(20) := 'aa';
    4    nInsertPos number := 3;
    5    vResult varchar2(20);
    6  begin
    7    vResult := substr(vStr1, 0, nInsertPos) || vStr2 || substr(vStr1, nInsertPos+1);
    8    dbms_output.put_line(vResult);
    9* end;
  123aa456789
  

  If you want to insert it after a special character, you can search for the position of your character with the help of instr

  concerning

• Insertion of space between or moving along the timeline of the actions

  Can someone tell me how to insert a space between stocks or move actions in the timeline panel. I'm new on board, although I have some previous experience with Flash.

  I added a shortcut for it in the preferences.

  Otherwise, you must go to

  menu/timeline/insert time

• How to make a space between my two images please.

  www.bristolequestrianservices.co.UK/sales.html

  It's my css.  I want to create a space between my two images.  I keep changing my margins and padding, but then writing under keeps coming back.

  #leftContent

  {

  Width: 350px;

  border: 2px solid #366;

  float: left;

  Padding: 45px;

  margin-bottom: 10px;

  overflow: hidden;

  }

  #middleContent	{
  	Width: 350px;

  border: 2px solid #366;

  float: left;

  Padding: 45px;

  margin-bottom: 10px;

  overflow: hidden;

  }

  Something like...

  #leftContent

  {

  Width: 350px;

  border: 2px solid #366;

  float: left;

  Padding: 45px;

  margin-bottom: 10px;

  margin-right: 10px;

  overflow: hidden;

  }

• Two characters of kerning affects many couples throughout the line of text

  Hello

  I try to kern characters in InDesign CC 9.1, and when I use either the arrow keys or switch value, multiple character sets to move - not only the pair where the cursor was inserted. This happens with the two system fonts and purchased fonts and is so really hard to kern, well, because as a pair fits where I want to, another pair is to throw out of whack.

  I don't know what is the source of the problem. Is it possible to fix this? Thanks in advance!

  RDS

  This could also happen if you use the justification of the text.

• What is the difference between these two JKM and when to use that one.

  Please tell the difference between these two.
  JKM Oracle compatible o JKM Oracle compatible (Date of update)

  Basic difference is in the obligation.

  JKM Oracle compatible (Date of update) wants a DATE/TIMESTAMP column in the source tables (s) who will get inserted/updated updated by the source application. ODI will capture the data modified, based on the value of this column. Only the DELETION part requires a trigger to keep track of deletion happening at source one or more tables.

  Where as JKM uniform Oracle does not require any which TIMESTAMP column in the tables of the source (s). It uses triggers to keep track of the INSERT/UPDATE/DELETE happening in the source.

  Compatible JKM Oracle performance (Update Date) is preferable, because it will create a little over the head on your source system. SO if you have a DATE/TIMESTAMP column in the tables of the source (s) that gets inserted/updated by the source application, then go JKM Oracle compatible (Date of update).

  Otherwise search JKM consistent Oracle.

  Thank you
  Fati

• How to specify the spacing between the two components

  Can specify us the distance between two points on a form? If so, please let us know how?
  
  Published by: user1670125 on July 14, 2010 05:37

  Hello user1670125 (please tell us your name).

  It depends on if you mean vertical (distance between the items on separate lines) or horizontal (distance between the items on the same line).

  A method I use for opening a vertical space between two elements is:

  -establish a single display without label
  -Name it "P #_BLANK ' or ' P #_BLANKn ' (if there is more than one page)
  -give a sequence so that it renders between the two points
  -do not escape special characters
  -give a source value of "< br / > < br / > < br / >" (according to the number of blank lines you need)

  A method I use for opening space horizontally between two elements (assumption here, is that you have defined the second element to not display on a new line and have adjusted the scope of column on other points in the same region to bring together the two fields as needed) - simply specify "& nbsp;" & nbsp; & nbsp; "in the first element display text of item (according to the number of spaces you need to).

  Hope this helps,
  John

• Find the difference of pressure between the two transducers using a NI DAQ 6008

  Hello

  First of all, I'm a relatively inexperienced LabVIEW Developer, so my apologies in advance if this message does not have something, or otherwise lacks clarity.

  I try to develop a VI as follows the pressure difference between the 2 EME 3100 pressure sensors (4-20 my), related to two different pressure lines, using a NO-DAQ 6008. I would like for the acquisition of data to read the two transducers, then have him find VI the differential and write this differential in an Excel file.

  The data sheet for these sensors may be found at: http://www.gemssensors.com/Products/Pressure/Pressure-Tranducers/Sputtered-thin-film/~/media/GemsNA/...  It is a 3-wire system, with a voltage between 8 - 24V. I use an external power supply of generic brand to power sensors, which provides a maximum of 24V @ 4A.

  I drifted my physical connection (for the two transducers) this thread http://forums.ni.com/t5/LabVIEW/I-am-having-trouble-Omega-PX4200-Pressure-Transducers-to-where-I/m-p... and am relatively certain of the accuracy of the information. For purposes of signal conditioning, I use a 500 Ohm resistor between the signal of each transducer and the Earth wire.  On the side of software, I use the latest version of LabVIEW (2011) as well as MAX on a Windows 7 64-bit machine.

  In an ideal world, the sampling rate would be as high as possible, but 4 samples per second would suffice for all purposes useful.

  Given this goal, are there any sample of VI (especially for MAX, which I have not yet used) who would be similar/applicable to this project, specifically, regarding setting a sampling frequency, calibration of the transducers or affecting the pins/channels appropriate? All resources would be greatly appreciated.

  Kind regards

  MG Wilkinson

  Measure the voltage between the two resistance (resistance by probe 4-20 MA) using the differential inputs of the x 600.

  When you configure the task, you can read several entries at once, by entering in "Dev_ / AI0:1" in the physical channels and using the "several channels / {unique |}". multiple} samples"polymorphic instance.

  600 x can read 1kS/sec.

  Do maths/conversions on the table, and then simply subtract the two tables.

  Could also take some samples (10-100) at 1 kHz and their average together, give you a smaller rate effective sampling but with less noise.

  A loop of producer-consumer would be good architecture here, let the daqmx reading live in a loop and sends the data via a queue to a 2nd consumer that performs mathematical operations and write to a file.

  

• I can't stop finite samples daqmx read between the two?

  Hi all

  I want to read data from 10 seconds to a trigger is received. for this im using daqmx task finished sample mode and read the data on the trigger getting. It works fine but I can't stop my vi between the two when its reading of the data. I have to wait for it to complete the reading of values, and then stop the vi.

  so I switched to continuous sampling mode that allowed me to stop the vi whenever I want.

  I just want to know is there any means or the property using which I can stop my task over daqmx read when I want?

  I guess you call DAQmx Read with extraordinary value (-1) for samples of #.  It is also the default if left thread continues.  In a finished sample task, it means to wait until the memory full buffer has been filled with samples before returning.  Once you make that call, you cannot directly finish soon.  You're stuck waiting for buffer fill or for the timeout expires (default 10 seconds).

  One way to avoid getting stuck is not to ask for samples that do not exist already.  You can query a DAQmx Read property, known as the "Samples available" or something like that and son of this result in a call to DAQmx Read.  Such a call will return immediately whatever data are currently available.  Subsequent calls will give you samples.

  -Kevin P

• Not sure of the difference between the two registry paths.

  HKEY_LOCAL_MACHINE tools\msconfig\startupreg\

  entries are stored here, program under key and others, how are they different from the entries stored here...
  HKEY_LOCAL_MACHINE tools\startupreg\
  They two have something to do with starting. someone with a little know-how in this field could be a great help.
  What is the difference between these two and what not the keys of each way folder. ?

  If it is any help, I checked my xp, vista, and win7 and they all have this branch of the registry but it is empty of all keys. for example empty:

  HKEY_LOCAL_MACHINE tools\msconfig\startupreg\

  and none of the bones had the other key that you mentioned. I do not use quicktime, so this may be the reason why.

  If I had to guess with analysis and fiddling with the registry since it was invented by microsoft, registry branch I have is 'standard '.

  While the secondary registry branch that I don't have is "non-standard" and probably created by quicktime or other software during installation.

  These registry branches are created because the manufacturers software third differring depend on utilities such as quicktime will be writtened to find the key in the registration or another branch.  If the additional branch and keys are added for extra measure by quicktime or other programs.

  I think that in your particular case, only quicktime can tell you why they need to put their keys in 2 different branches.  but its likely that my logic above explain the reason for being.

  HTH.

• Windows 7 pro. Two characters rubbed off during shipping. Cannot complete the installation.

  It's a HP workstation I bought for video editing. The product key I have missing two letter (and or numbers) it seems to have been rubbed off during shipping. Windows is already on the machine and prepares the machine for a first use, when I started. Try as I might I could not understand what are these two characters. I tried to guess but it far too long. Is there another way. I have the disc and the booklet. I bought it on ebay from a store computer about 6 months ago. This is a 25 character key in the format. XXXxX-XXXXX-XXXXX-XXXXx-XXXXX. The lower case x are the characters miss me. Do I have to buy another drive or y at - it another way to recover the missing characters?

  It is also possible (if you can take a picture of the tile) for the assistance of an Activation Center.

  https://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx

  When asked which service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you.

  Be polite but persistent-, they should be able to help.

• Hi, can I cancel my monthly subscription between the two?

  I just want to confirm if I can cancel my membership between the two without any cancellation fees?

  Have a look here to cancel your membership creative cloud