Set the position of the cursor in the text added (to make the part of the text in index) in WORD using Report Generation Toolkit

Similar Questions

• Write array of strings in the text file delimited by tabs without Report Generation Toolkit

  I find that writing in the File.vi worksheet does not Append REAL mode.  http://digital.NI.com/public.nsf/allkb/D1629D863F0442CC86256A0200558A15

  That url describes a workaround solution is to first create a file in Excel, save and then writing adds to it.  This is something that users of my compiled application will simply not do.

  Writing File.vi measure generates tab limited text files but only takes some input signals.

  I would take my array of strings and simply write that in a limited file tab.  Is there really no way to go in LabVIEW without spending $500 one another?

  
  

• Hide the Excel using LabVIEW Report Generation Toolkit or active chart legend

  Hello Eveyone:

  I'm working on tool report generation in labview and creat excle report. I create the chart in the report, but I can't hide the chart legend or change the font size using the report generation tools.

  I appriciate you guys time.

  Thank you

  Howdy!

  What version of LabVIEW Report Generation Toolkit you use? Did you take a peek at the .vi LabVIEW example column chart (Excel)

  

  and he looked at using the Excel insert graphical VI and Excel graphic Set do?

• Save the report that VI of report generation toolkit is broken

  Hi all

  I created a journal vi data, using report generation tools. He works first and then I copied the vi to another folder and tried to run but ended up with a broken vi.  The error occurs in the Save report vi of report generation package.   Please see vi and captures screen attached. I'm sure that if you run the vi, it might work on your machine, but will not work on mine. That's why I find it cable. Has anyone seen this kind of problem before?

  Hi all

  I spoke with an application OR engineer and we have tried to compile mass of Labview on the particular folder containing the VI.

  Tools---> Advanced---> massive compilation.  This corrects the problem.

  Thank you

• create the new file using report generation express vi

  Hello

  In my application, I need to write that certain data in spreadsheet Excel. For whom I created an excel template and I used the express vi report generation Toolkit to record appropriate data in the columns of the place. I need a new file created every day by the name of the day and write the data that he rest of the day. I have problems, create the new file using this express vi. I tried to use the low level vi but not able to make properly.

  Join my code and the excel template.

  Help, please.

  Thank you!

  I suspect that your problem is illegal characters (' / ') in your path, certainly it is the case in your original vi. You need to format your path, something like this (underscore instead of a slash stroke):

  

• How to display the drop-down list box in MS excel by using labview report generation toolkit? pleasepost code block diagram?

  How to display the drop-down list box in MS excel by using labview report generation toolkit? Please post the block diagram of the code so that I can able to generate from the drop-down list box in excel with the menu drop-down...

  Like this. (edition, use the reference forms instead of the reference to the worksheet)

  Ben64

  

• Unable to set the paper size at all when using Firefox built-in PDF Viewer

  I use the built-in Firefox pdf viewer and it's fab.

  But if I try to print, I go to the preview before print and go through the layout and it is useless, because it assumes that my book is almost SQUARE, and the only options I have are portrait and landscape. I use A4 paper, like most of the British and European.

  Of course, I can't work around the preview before printing or that it ends up in the wrong settings by default.

  Adjust (default), it is only based on the width (if I set the margins to zero - it's okay), but lacks the lower half of the page because Firefox think my paper is the PLACE for a reason any.

  The only thing that works is to set the zoom to print at 60% and have tiny everthing, which is ridiculous.

  Any ideas? Is it possible to manually set the width and height of the paper?

  Thanks if anyone can help with this - my alternative is to use the Toshiba reader of PDF files, and it prints terribly to be unreadable. The print quality on Firefox is fine, if I could get to fit on paper...

  Hmm, in your screenshots, why mention the title bar of the window Yahoo mail? Is it an attachment that is somehow embedded in the message? If so, can you find a way to see it in its own tab? Sometimes with the right button > setting > Open Frame in a new tab will do, but I did not open Yahoo Mail to experiment.

• Satellite U400: How to set the BIOS password & learn how to use facial recognition

  I have a Satellite U400 Satellite.

  Can someone direct me to a link of support for the implementation in passwords in BIOS?

  There are several options and I don't know what does what...
  Thanks for your help...

  Another point:

  I feel that the definition of a password or both in the BIOS will help the face recognition program to work, for some reason any.
  I NEVER managed to properly configure that, although I tried several times,
  go in accordance with the instructions.

  A lot of frustration and time, I would say.
  This is for safety.

  > Can someone direct me to a link of support for the implementation in passwords in BIOS?
  If you want to set the password in the BIOS you will need to access the BIOS by pressing the F2 key immediately after that the laptop has been powered.

  There is a 3rd tab security.
  There you can set the BIOS password. You would need to put everything first and then you must confirm the password once more to

  > I have the impression that the definition of a word or two in the BIOS will help the face recognition program to work, for some reason any.
  This s the password of BIOS nonsense has nothing to do with the reorganization of face.

  Here's a very useful thread that provides details on the reorganization of the face:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=147434

  Check it out. It is very useful

• Insert symbol in word doc using the report generation toolkit

  I'm trying to insert a graduation or a brand of corss the word doc by reading the bookmark. To enter a value, I used a control of the chain. But I have been unable to enter these symbols. I tried to make the insertion of an image, but it is to insert the image but don't replace do not bookmark. Please help me with this!

  ben64 wrote:
  

  Maybe these symbols are not included in the character set used by Word. Do you have something or nothing, is there an error message?

  Ben64

  Here is an example of what I said:

  

  I need to insert the check mark, set the font for report to Wingdings (restore the default font after). If I don't do this the character ü is written (0252 default font character).

  Ben64

• keep the current residents of cell - Report Generation Toolkit

  I have a model in excel and I use the Table.vi easy Excel in order to write an array of strings in the report. The question, I'm running is, because it is a model, I already have residents formatted as I want in Excel, but when I write the table it does not keep residents. Is it possible that I can either:

  1. get boarder formatting then set the formatting to that

  2. stop in the first place development forms the border

  

  If the thread that the above does not quite give me the answer, but he point me in the right direction. I found the table threaded in Report VI and it opened. If you dig down you will find the Excel_Insert_Table.vi. I used this and the value "Show gridlines" false. Supports the problem.

• Cannot print on the Epson TM - U590 Slip printer Report Generation Toolkit with LabVIEW 8.6.1

  Hi all

  I have an application that uses the report generation tool to print tickets for a printer file.  Usually, it works very well - I 8 existing facilities where there is no problem

  I install the software on a new site that uses a printer Epson TM-U590 slip currently and I can't for the life of get me printing to work

  Using a Standard report, the Print Report.vi returns error-41002, indicating it does not find the printer.  I opened the VI using the remote debugging and it does not find the name of the printer properly with the available query Printers.vi.  It gets an error-2147352567 code starting from the printed node, which is then replaced by the de-41002 error that is reported.

  For historical reasons, I always use LabVIEW 8.6.1 for this project.  I plan to spend in 2011 or 2012, but I had some reliability problems with the other parts of the application after trying to upgrade to a new version of LabVIEW, so I would avoid it at this point.

  The application runs on a standard desktop with Windows 7.  The slip printer works fine if I print from Notepad, and my request is happy to print to any other printer, just don't slip printer.

  The slip printer using the LPT port.  Previously, printers of the folder that I used were USB but I expect the printer driver to hide the details of the application...

  Any ideas would be very appreciated

  See you soon

  Brett

  I managed to solve the problem, thanks to this article: http://digital.ni.com/public.nsf/allkb/67D60209102E2161862568AC0074BF64

  I now have the same problem with a folder of Star printer (a TUP592), this time with another program developed in LabVIEW 2011.

  As mentioned in the article, the problem is in fact to do with margin settings rather than the name of the printer, despite what says the error message

  After some tests, I received the Star printer to work by setting a large (> 14cm) right margin.  No idea why this is necessary because it seems quite happily print to the right edge of the paper, but there you go.

  So I don't have defintely solved the original problem yet, as I've not had back on the site, but I hope that it will be useful to someone else.

  See you soon

  Brett

• Report Generation Toolkit, production of the 2147417842 error, "The application called an interface that was marshalled for a different thread."

  Hello world

  I have an application that stores data in an Excel worksheet by using the report generation tool.  My VI have worked well in the past using Excel XP, but since I have upgraded to Excel 2007, I get COM errors like this:

  "2147417842 error occurred while the application called an interface that was marshalled for a different thread. in Excel_Insert_Text.vi', this is the exact wording, even with the odd punctuation and capitalization.

  The first occurrence of the error is not determined.  Sometimes, to the record 10 sessions, involving a new .xls file, may occur before this error.  Once this error occurs, I must leave LabVIEW to solve.  If I try to do something with Excel, I still get this error, even if sometimes it comes out different source Excel_Open.VI is another.

  These screw logging worked fine until upgrading to Excel 2007.  I checked and I have been using a very old version of the report generation tool, v1.0.1.  I read the documentation and had a big sigh of relief when I realized that I needed to upgrade to v1.1.2 for Excel 2007 help.  However, even after the upgrade, I still get the same errors.  I'm using LabVIEW 8.0.1 and I also build these screws in an application.   The error occurs in the application built both in the IDE of LabVIEW.  Anyone out there have any idea what I can do to fix this?  I google a bit and discovered it is a COM error, but I can't find any reference to the report generation tool specifically.

  Thank you

  Phil

  I think that suits him!

  Here's what I did: I left privileged execution environment level upper VI as "as the appellant.  I tried the "user interface" configuration, but it seemed to slow down considerably the program.

  Then, I found each sub - VI, calling the report generation tool and define the environment for running favorite "user interface".  All the errors went away, and the program is much happier now.

  Big assumption on what a Christian, thank you!

• wwv_flow_fnd_user_api.edit_fnd_user to set the change of password on first use

  Hello
  
  Oracle Database 11 g Release 11.2.0.1.0 under Windows 2008 R2 x 64
  Request Express 4.1.0.00.32
  
  I import a workspace of our dev system to 100 databases and I want to make sure that developers are not required to change password on the first loging, otherwise it will lose a lot of time
  
  I am running
  
  ALTER session set current_schema = APEX_040100;
  
  Start
  wwv_flow_security.g_security_group_id: = 10;
  wwv_flow_security. G_user: = "ADMIN";
  wwv_flow_security.g_import_in_progress: = true;
  
  for r in (select *)
  of apex_040100.wwv_flow_fnd_user
  where security_group_id <>10) loop
  wwv_flow_fnd_user_api.edit_fnd_user (p_user_id = > r.user_id,)
  p_user_name = > r.user_name,
  p_change_password_on_first_use = > 'n',.
  p_first_password_use_occurred = > 'Y');
  end loop;
  
  commit;
  
  wwv_flow_security.g_import_in_progress: = false;
  end;
  
  However, this does not seem to do anything and does not return an error. When I query the table of apex_040100.wwv_flow_fnd_user nothing has changed
  
  I searched the documentation of the APEX (http://docs.oracle.com/cd/E23903_01/welcome.html) for wwv_flow_fnd_user_api , and there is only a single match which lists just the name of the package, not even the specification
  
  Thanks in advance
  
  Robert

  OK now, I had a little more time to look at your code.

  I would like this:

  declare
    t_secgrp_id     apex_040100.apex_applications.workspace_id%type;
    t_existing_appl apex_040100.apex_applications.application_id%type := ;
  begin
  
    select workspace_id
    into   t_secgrp_id
    from   apex_applications
    where  application_id = t_existing_app;  
  
    wwv_flow_security.g_security_group_id := t_secgrp_id;
    wwv_flow_security.g_user := 'ADMIN';
    wwv_flow_security.g_import_in_progress := true;
  
    for r in (select *
              from apex_040100.wwv_flow_fnd_user
              where security_group_id t_secgrp_id)
    loop
      wwv_flow_fnd_user_api.edit_fnd_user(p_user_id                      => r.user_id,
                                          p_user_name                    => r.user_name,
                                          p_change_password_on_first_use => 'N',
                                          p_first_password_use_occurred  => 'Y');
    end loop;
  
    commit;
  
    wwv_flow_security.g_import_in_progress := false;
  
  end;
  

  see especially the secgrp...

  Kind regards
  Richard

  -----
  blog: http://blog.warp11.nl
  Twitter: @rhjmartens
  If you answer this question, please mark the thread as closed and give points where won...

• How to set the font in firefox 4.0 using ubuntu?

  The zoom feature is OK but I want to put permanently the size of the font on my pages in firefox using the Ubuntu operating system. I don't see anything under tools and it seems not be a lot of questions asked previously in the section help on Firefox on Ubuntu.

  It is difficult to define a single font size without destroying the display of most web sites. An alternative would be to keep your preferred zoom level and apply to all sites. This requires an add-on such as:

  • Default FullZoom Level
  • NoSquint

  It works for you?

• HP Pavilion 17 Laptop: How I PERMANENTLY set the clickpad to disable when you use a mouse?

  I know how to go into the settings and change so that the clickpad is disabled when the mouse is in use.  I leave the mouse plugged all the time because I don't like the clickpad.  However, I have to disable the clickpad whenever I restart the computer.  As if by magic, the parameter disappears whenever the computer is turned off.  I want him to stay permanently.  How to make that happen.

  It is important here to ensure that you do not change ANYTHING else (don't hit the DELETE key on anything)

  OK, right click on start, then run
  type: Regedit

  hit return on your keyboard

  Yes, there are a LOT of things here, but it is organized.

  you have the menu at the top, you want to hit edit and then find

  type: DeleteUserSettingsOnUpgrade
  
  If you look at the bottom of the regedit window, you will see the location, and MUST say: Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  If Yes, then on the right side (in regedit window), you do a right click on the DeleteUserSettingsOnUpgrade, and click on edit.    Change a 1 to 0.
  
  The logic here is the 1 means 'yes', a 0 would mean no..   We do NOT want the user settings to remove on the upgrade, so that we modify the value.
  
  Once you make the change and press 0, you can go out, and that will solve the problem.    Note that you must always indicate the pilots to turn off the touchpad when an external pointing device is connected if you don't have already done.
  
  The advantage of doing this, rather than turn off the touchpad, is that you can unplug your mouse to travel, and you don't have to make time before changes.