Error or invalid Windows bad image on startup

Similar Questions

• Upgrade Windows 10: error called "LogonUI.exe - bad Image C:\Windows\system32\LMIinit.dll.

  I have a Windows 7 Fujitsu Lifebook (5 years). I tried to update to Windows 10 without success. Finally after a Windows7 update and then upgrade Windows 10. Success! Remotely, the company THAT THIS guy decided that I had to update W10, now all I get is "failure in the snp nonpaged area - uvc.sys" the laptop then restarts auto and trying again and again. Looking at updates successfully I see there's a Windows 10 call successful as well as failed. I did a reset to, but who brought me back to Windows 7.  That's life.  However, when I close I now get an error called "LogonUI.exe - Bad Image C:\Windows\system32\LMIinit.dll if the other is not designed to run on Windows or it contains an error." Try to install the program by using the original installation media".

  With all the man hours spent the last week and a bit on this point, I have to stay on Windows 7 and when the thing dies completely invest in a new (if my boss allows me)!

  This my friends, is his last chance, can someone help me.

  Kind regards

  Sue

  Hello

  I realize has the inconvenience that you are experiencing with the installation of Windows 10. I will definitely help you with this.

  I suggest you refer to the suggestion created by Andre Da Costa in the link mentioned below:

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-fix-Windows-10-setup-failure/eba3c864-d9fe-4F8E-9468-81b1f89473ed

   

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• Unable to connect to the Windows Vista profile, receive the error message "logonui.exe - bad image".

  Original title: bad image Logonui.exe

  I have laptop Dell XPS M1530.  Last night when I tried to start the computer, it went through the movements until he got to the login screen.  Rather than get the profile to connect to, I got the error message following "logonui.exe - bad image.  C:\windows\winsxs\x86...\COMCTL32.dll is not designed to run on Windows or it contains an error. "When I click ok on the error message and wait for an another error message appears" logon.scr bad image. "  I tried to run the Startup Repair and restoration of the system without result.  I cannot lose the files on the hard drive, but have run out of ideas and options on how to solve this problem.  Someone at - he had this problem and managed to fix it?  I've exhausted the System Support of Dell, as they have failed to: "format the drive and restore to original state."  That is not an option right now.

  I went into the Commpand prompt and delete files that have been raised as errors.  When I rebooted, it came in fine.  I got the files I needd for backup and then rebuilt the system.

• Error: _ "Sidebar.exe - bad image"__windows/system32/sfc.dll is not designed to run on windows or it contains and error. " Try to install the program by using the original installation media or contact your system administrator. __

  Help, please!
  I started my computer today and it came with this error:

  "sidebar.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  I click on OK, then he said:

  "Acrotray.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  I click OK and then it says:

  "hpqtra08.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  Also I got an error report saying that windows sidebar stopped working.

  My computer is VERY slow in all the commands I give.
  I also tried to run the sfc (System File Checker command) and acts like he is going to run the program, but then just closed.

  Do you have an idea what is happening with my computer and what I can do to fix this?

  Thank you very much!

  Hi deacon829,

  You did changes to the computer before that happened?

  Step 1: Start the computer in safe mode and check if the problem persists, to do this, follow the steps below,

  Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. In the advanced startup options select safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2: If you try to install any application before this program, try to uninstall them.

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  If this solves the problem, you can deduct that the demand is probably corrupted, damaged or incompatible. You can check with the manufacturer of the program for more information.

  Step 3: System Restore: System Restore to put the computer's system files to an earlier point in time.

  Look for steps to restore of the system in the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  If the problem persists,

  Step 4: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• 3.4.1 OpenOffice won't open Windows 7 after the success of the download. Error message: - Soffice.bin - bad Image.

  This additional information is included in the error box:-C:\Windows\ system32\cppuhelper3MSC.dll is not designed to run on Windows or it contains an error. Contact your system administrator or the provider of software for support.

  I tried to get help from OpenOffice.org without result. Uninstall/reinstall the results in the same error. I've never had all the previous versions of this program on my PC.

  FYI

  This isn't what asked you, but he can help in any case, I'm under OpenOffice 1. 1 5 with Windows 7 SP1.

  Try this version, can give it a try, because it will not harm you in any way.

  http://filehippo.com/download_openoffice/431/

  The current time and the date right now in Iran, Islamic Republic of is

  16:47
  Tuesday, March 5, 2013
  The + 0330 UTC standard time
   

  UTC/GMT is 13:17 Tuesday, March 5, 2013

  Current weather conditions in Tehran

  Shower of light61 ° F / 16 ° C

• Error, called "GfxUI.exe - bad Image".

  I have an error message which disappear from my Windows 7. It is called "GfxUi.exe - bad Image" and said that C:/Windows/System32/atiu9p64.dll is not designed to run on Windows or it contains an error. Then it asks me to resintall it but there is no option for this. It is more of a thing of substance; I can still run programs and work, but the error message does not disappear.

  Need help, please someone. Thank you

  Hello

  1. have you made changes on the computer before this problem?

  2. when exactly this error occurs?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run Microsoft Safety Scanner and check if it helps.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.

  Method 2:

  Put your computer in a clean boot state to identify the application at the root of this problem.

  Place your computer in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Hope the information is useful.

• Impossible to open the defragmentation, get error Defrag - mmc.exe - bad image

  Could not open the Defragmenter - error message: Defrag - mmc.exe - bad image. "The application or DLL C:\Windows\System32\mmcbase.dll is not a valid Windows image. Please check this against your installation diskette. »

  Hi ELCC.

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. do you have security software installed on the computer?

  I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• Error message for WIndows 7 Image restoration software

  I get the error message, do a restore image on a new hard drive. It says "image has been created on the computer with the help of EFI and the computer uses the Bios". Have a backup of windows external disk image. Failed hard drive. Replaced the hard drive. Repair disc I created did not work. Started from the original system disk and asked to restore the image. Same computer in question, no change except old drive shot and the new drive installed. Restore from a MyBook via the USB port of the image. Any ideas how to fix?

  See this link for the answers to these questions.

  https://social.technet.microsoft.com/Forums/windows/en-US/d23b4b16-e467-4ff2-a4fc-45e7ac88c4be/windows-7-image-restore-error-message-efi-vs-bios?forum=w7itprogeneral#8276aac6-f0c9-4258-9baf-3906018b8d2c

  GregD

• Orphanage Owl error message: Photoshop:exe - bad Image

  I have this error with Adobe Photoshop CS5.

  With reading the other posts, I found an answer to this same question posted - except with CS4.

  He mentions the file plug-in and 32 and 64-bit. Here is where I get confused.

  I parked plug-ins CS3 and put them in my CS5 plug in folder, which is where the problem came. How can I clean my mess now?

  I have no idea how know what is happening with 32-bit and what is happening with 64-bit... You could say, I do not know my songs and you would be right. Laughing out loud

  Help, please. I have benn ignore him for almost a year now.

  c.sewick

  I parked plug-ins CS3 and put them in my CS5 plug in folder, which is where the problem came.

  No doubt.

  Remove all the plugins that have a date older than the CS5 plugins.

  And do not copy photoshop plugins from one version to another - many of them will depend on what is the specific version.  And while we try to test for problems of version, we can always test in the future :-).

• Restart the process crashes with a message error "0xc000007b bad image exception processing message".

  While restarting, it gets stuck in a State of "Disconnection" while showing this error:

  Windows - bad image

  exception processing message 0xc000007b 0x000007FEFDC0715 0x000007FEFDC0715 0x000007FEFDC0715 0x000007FEFDC0715 settings

  When I click 'OK' twice (cause the error reappears) the status changes to 'Stop', but it takes forever.  How can I fix it? It is a HP Pavilion dm4 with Windows® 7 Home Premium 64-bit. How to solve this?  Please help me!
  -------------

  Hi Susan Roberts,
   
  1. you did make changes to your operating system before this problem occur?
  2. updates of Windows or new hardware/software changes?
  
  Closing general troubleshooting: shutdown problems are usually caused by a program or process that won't come out gracefully. The program or process may be against malware, or may be legitimate (for example a pervasive like Norton or McAfee antivirus).
         
  Method 1:
     
  Start your computer in safe mode and check if the problem persists.
         
  Reference:
         
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode 
            
  Method 2:
               
  If the problem does not happen, I recommend you perform the clean boot.
              
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• "SkyDrive.exe - bad Image" Error Message box

  Whenever I boot, I get a box of titled error message: "SkyDrive.exe - bad Image" and the message reads, "C:\Users\Christopher\AppData\Local\Microsoft\SkyDrive\17.02010.0530\SyncEngine.DLL is not designed to run on Windows or it contains an error. Try to install the program using the original excavation media or contact your system administrator or the provider of software for support. 0xc0000020 error status. "You kindly give me some pointers as precisely what to do here? Thank you!

  Hi Christophe,

  This problem may occur due to the infection by the virus or because of conflicts between the third-party applications.

  Have you done with the latest changes on the computer before this problem.

  Method 1:
  I suggest you run an antivirus scan using the Microsoft Safety Scanner to confirm that your computer is free from any infection by the virus. Please find the link below.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  (1) data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  (2) the Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.

  Method 2:
  If the problem persists, I suggest to start the computer in safe mode and check if the problem occurs or not. If the problem does not occur in mode safe run clean boot and check if it helps.

  
  Step 1:
  I suggest you to return the item and check if it helps.

  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-in/Windows-8/Windows-startup-settings-including-safe-mode

  Step 2:
  If the issue occur not in Mode safe run clean boot and check.

  Affecting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Error at startup of Windows 'msseces.exe - bad image. the application or dll program files\ microsoft security client\ sqmapi.dll c:\ is not a valid windows image... »

  MSSECES. EXE

  My mini HP netbook 110-1000 has now two screens same when I start, I am running windows xp. When I boot I get a box that says msseces.exe - bad image, it says inside the box of the application or dll program files\ microsoft security client\ sqmapi.dll c:\ is not a valid windows image. Please check this against your installation diskette. the netbook came with a floppy disk. programs are in the partitioned hard disk. the other thing, I noticed that it's my icon for security essentials is missing and I can't uninstall security essentials because it crashes when I try to uninstall, and then he asks me if I want to report to microsoft. e help thank you Gary.

  Hi Gary,.

  It seems that Microsoft Security Essentials has corrupted on your computer. You can uninstall and reinstall the program to check the issue.

  Step 1: Since you are facing problems of removal of the program, you can check the following thread and check if it helps.

  Uninstallation of MSE - Microsoft Answers

  Step 2: To reinstall, refer to the following.

  Virus, spyware & Malware Protection | Microsoft Security Essentials

  See also:

  Checklist for installation of Microsoft Security Essentials - Microsoft Answers

• Get 'bad image' errors at startup on XP

  You don't know if it's OK jst the chip but discovers this channel via Google after trying two registry fix downloads that were purchased.  Problem - suddenly 2 days ago I found that I couldn't get into XP without having to cancel about 15 messages in 'Bad Image'.  As noted that not a single program at fault, I would be grateful for any advice on how to fix the problem please.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/Windows-XP-bad-image-start-up-message/54e44de9-ea47-4489-AC15-243a66eedb2a

  Halima, thank you very much.  While waiting for a response, I noticed that I had a common feature of many messages 'bad image' to cancel on each startup was "Bearshare" in the description of the DLL, so I re-installed the program again and then typed "problems of Bearshare bad Image" in google, which led me to this site - http://www.geekstogo.com/forum/topic/294780-bad-image-errors/

  where I downloaded their "Revo Uninstaller" which allowed me to perform a deep unistall of Bearshare.  After reboot, I haven't lived any other message 'Bad Image'.  I hope that it will still be the case, but I'll keep your advice in case I need to try something else.  Thanks again.

  Geoff

• Mistakes of bad Image of Windows XP on startup

  Here is a list of the errors I receive at first upward:

  Rundll32.exe - Bad Image
  -application or DLL c:\WINDOWS\ilaqucad.dll is not a valid windows image. The text is the Setup disk.

  Rundll32.exe - bad Image
  -application or DLL C:\WINDOWS\abdsdmsg.dll is not a valid windows image. The text is the Setup disk.

  RUNDLL
  -module error loading specified ofqsi.dll not found

  RUNDLL
  -Error loading C:\WINDOWS\ilaqucad.dll
  %1 is not a valid WIn32app

  RUNDLL
  -Error loading c:\WINDOWS\abdsdmsg.dll
  %1 is not a valid Win32app

  Some of them are not pop up until I click OK on the previous errors.  I have no more of the Setup disk.

  What should I do?

  Part of the problem is if you configure the computer to start in a clean boot state, then things work OK (unlikely), there are no instructions that tell you what to do but then restore your computer to a normal state and which does not solve anything.

  Is that sort of thing pretty good work for you JoshB_2011 here?  Of course, this is not and he won't - ever.

  Is it supposed to be some kind of magic that happens when you start in a clean boot state, which makes all the problems disappear, then you go back to a normal state and all is well?

  To do something between these two things... and that's the "Troubleshooting" part... There is no included troubleshooting.

  I had read it all through (it may be not a good idea at first), then apply it.

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• How to fix the error message 'bad image logoui.exe error' starting in windows vista?

  I have windows vista installed on my hp laptop. I used it for at least a year until a few months ago, I started to meet this error message at startup:
  "LogonUIexe-Bad Image C:\Windows\system32\HID.dll is not designed to run on Windows or it contains an error. Try to install the program with the help of original installation media or contact your software support provider or system administrator."
  Is anyone having this problem. Please provide a cure.

  Hello sheritaG,

  Run The System File Checker utility:

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search .
  2. Right-click cmd in the programs list and then click run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click continue
  3. To order invites, the following line and press ENTER: sfc/scannow (Yes there is a space after sfc)

  This analysis may take some time to complete. When the analysis is complete, test to see if the problem you are experiencing is resolved. Hope this helps you. Let us know anyway. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)