Insertion fails with not enough big column.

Similar Questions

• 10.1.2 6640838 YES to 10106 fails with not enough space on the large disks

  I have 12.1.3 on 64-bit SLES 11 on a mount point 24 TB 19 TB free. When I try to apply 6640838 YES CD PLACE HOLDER ON ARU to 10106 by upgrade OracleAS g 10 forms and States Oracle E-Business Suite Release 12 [437878.1 ID], I get an error the installer who said not enough disk space available for Oracle Home. Please make sure you at least 886 KB of free space and try again. I already tried with - IgnoreSysPrereqs. Any other tips to apply a patch shapes on a large YES mount point?
  
  Thank you

  Please see (10.1.x group application patches fails on Partition greater than 2 terabytes [1338204.1 ID]).

  Thank you
  Hussein

• 702 Installer fails with not enough space in / tmp

  Trying to install coldfusion702 on solaris. Fails to complain about not enough space in / tmp (I got 10 GB). Tried to download the file again (assuming that possible corruption). Tried to place somewhere else in the tmp setting IATEMPDIR var. Nothing seems to help.
  
  Hope that someone has encountered something like this and can offer a solution. Maybe I'm missing something or a package. In the result below, ' expr: non-numeric argument ' caught my attention - I have the feeling that the script fails to the analysis of output of the df command.
  
  Thank you
  Henry
  -command line output-
  ./ColdFusion-702-sol.bin
  Preparing to install...
  WARNING: / tmp has insufficient disk space!
  Attempt to use/export/home/username for install base and tmp dir.
  expr: non-numeric argument
  
  CAVEAT! The amount of disk/tmp space required to perform the
  This facility is superior to what is available. Please
  release at least 0 kilobyte in / tmp and try this
  Setup again. You can also set the environment IATEMPDIR
  variable to a directory on a partition to free enough disk
  disk space. To set the variable enter one of the following
  commands at the prompt of UNIX before running this command line
  Once again the installer:
  

  Just in case where someone else encounters this problem, here is the solution, my colleague helped me to understand.

  install the script analysis through the output of the command df to calculate the space in / tmp or any other temporary location for the installation files. If you have a large amount of space allocated to the/tmp (on solaris, it would be 5 GB or more) the output will look like this:
  / tmp (swap): 19773408 blocks 400226 files
  Note that there is no space between: and the size, the installation script is looking for the 4th field, which is in this case the word 'blocks' which is obviously false.

  To work around it, we have created a temporary script with filename "df" which replaces the df command:
  #! / bin/sh
  / usr/sbin/DF | tr ":" " "
  and the PATH has changed to have this temporary location of script at the beginning. This allowed the installer to run as it simply replaces: with space.

• "Backup failed. Not enough storage space.

  Original title: image

  W7 32-bit HP. Use the image via Control Panel with success for a long time. However, this morning received the message "backup failed. Not enough storage space. Have you checked and at least ten times more space on the destination like this drive would be necessary for the entire image.  The only change I've made since the last successful backup is to install an SSD on my computer as the main C drive.

  Thanks, but none of it has hit the problem!

  I now it worked. For the benefit of any person who has the problem, Image requires that there is enough space on the * source * system partition of the drive for the shadow file (when get "space insufficient" messages everyone (including me) assumes respect to the * destination drive!)  (Not so).

  This seems to happen to a lot of people who are for the first time in an SSD. Because I had previously shrunk the partition on my drive C primary, preparatory to mounting small SSD (112 GB), the system partition was too small for shadow of the image file.

  Under W7 disk management even if the main partition on the C drive could be reduced to create a space unallocated, the space could not be assigned to the system partition as requiring a contiguous space.

  So I used (free for home) Easus Disk Manager to create space * before * the partition main c and then expanded the system inside partition, making this system partition that is large enough. Everything worked well then!

• I use creative cloud in order to download the trial of Photoshop on my pc but this error:-Instillation failed. Not enough disk space. Please free up space on C and try again (-30)

  I use creative cloud in order to download the trial of Photoshop on my pc but this error:-Instillation failed. Not enough disk space. Please free up space on C and try again (-30)

  I entered the settings of cloud and told to download for my largest drive E (which it fine for lightroom) but it only downloads on drive C (small disk almost full) for Photoshop. I missed something or is this a bug?

  Thanks in advance

  Shared resources and temporary files will be stored on your primary drive.  If a lack of disk space prevents installation then make sure you have enough space on the main drive for temporary files and installation files extracted to be placed.

  Guinot

• How an existing connection of work can begin to fail with 'not in measure to establish a connection to network adapter?

  I can't get my previous database connection called system_connection_orcl to connect.  I don't understand why all of a sudden a connection that has worked is having this problem at random.  A few times, it connects well, other times, it's not.   I have internet on this operational computer.

  
  Login name: system_connection_orcl

  Username: System

  Password: [password]

  Save password: Yes

  Connection type: basic

  Role: by default

  Host name: localhost

  Port: 1521

  SID: orcl

  
  Then I click 'TEST', and it returns the following error:

  Status: Failed - Test has failed: IO error: the network adapter could not establish the connection.

  Hi 2998741,

  At 12.1.0.2 (you seem to be on your banner lsnrctl) simply:

  MODIFY a PLUG-IN pdb1 SAVE DATABASE STATE;

  which seems simpler than a trigger.

  Turloch

  SQLDeveloper - forum

• Windows 7 backup failed, saying: not enough space still there clearly is... What is happening?

  See the screen shot in the link...... it's weird... the backup is valid it is one he has already made and still there is enough space to hold the backup then what happens?

  http://img128.imageshack.us/img128/7779/backupspace.PNG

  Hello sirius.

  Check out this technet article.

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/18c33a73-5719-499a-866C-af124c05e671/

  Let me know if it works

  all the best

  Kind regards
  ADDISON

• "The installation failed.  not enough permissions. "

  Hello

  This is the message that continues to appear whenever I try to download this application.  I have OS X El Captain 10.11.5.  I went through all the trouble shooting of such options as you ensuring my JavaScript is turned on and allowing the taking in I removed all my computer for a clean adobe applications and I can't put anything on.  For each facility, the bar never downloads at all, it is immediate to tell me that he did not. Help, please

  Hi rihanaj35319007 ,

  It seems to be the issue of authorization to file & folder in Mac, please refer to this link for help permissions & Disk Space | Apple Support communities.

  Once you have the right to install the software, please download Adobe Reader using this link Adobe Acrobat Reader DC install for all versions.

  Let me know if you encounter any problem.

  Kind regards

  Christian

• records inserted duplicates and not inserted values

  Hi all

  create the table XXC_ORDERS (inventory_item_id customer_id number, number, budget_entity varchar2 (10), number of EXCHANGE_RATE, CURRENCY_CODE varchar2 (10));

  create table XXC_SALES1 (inventory_item_id customer_id number, number, budget_entity varchar2 (10), number of EXCHANGE_RATE, CURRENCY_CODE varchar2 (10));

  create table XXC_BUDGET (inventory_item_id customer_id number, number, budget_entity varchar2 (10), number of EXCHANGE_RATE, CURRENCY_CODE varchar2 (10));

  create table XXC_SALES_BUDGET (inventory_item_id customer_id number, number, budget_entity varchar2 (10), number of EXCHANGE_RATE, CURRENCY_CODE varchar2 (10));

  -drop table XXC_SALES_BUDGET

  insert into XXC_ORDERS

  SELECT 27962, 68329, 0.82082, 'US', '93'

  DOUBLE;

  CREATE VIEW Orders_V1 AS

  SELECT *.

  OF XXC_ORDERS;

  insert into XXC_SALES1

  SELECT 68329, 27962, '93', NULL, 'EUR '.

  DOUBLE;

  CREATE VIEW Sales_V1 AS

  SELECT *.

  OF XXC_SALES1;

  insert into XXC_BUDGET

  SELECT 68329, 27962, 'CZK', NULL, NULL

  DOUBLE;

  CREATE VIEW Budget_V1 AS

  SELECT *.

  OF XXC_BUDGET;

  DECLARE

  V_ITEM_ID number;

  number of v_cust_id;

  v_Entity varchar2 (10);

  number of v_rate;

  v_curr varchar2 (10);

  CURSOR c_1

  IS

  SELECT INVENTORY_ITEM_ID,

  CUSTOMER_ID,

  BUDGET_ENTITY,

  EXCHANGE_RATE,

  CURRENCY_CODE

  OF XXC_ORDERS

  UNION

  SELECT INVENTORY_ITEM_ID,

  CUSTOMER_ID,

  BUDGET_ENTITY,

  EXCHANGE_RATE,

  CURRENCY_CODE

  OF XXC_SALES1

  UNION

  SELECT INVENTORY_ITEM_ID,

  CUSTOMER_ID,

  BUDGET_ENTITY,

  EXCHANGE_RATE,

  CURRENCY_CODE

  OF XXC_BUDGET;

  BEGIN

  FOR c_rec IN c_1

  LOOP

  BEGIN

  SELECT INVENTORY_ITEM_ID,

  CUSTOMER_ID,

  BUDGET_ENTITY,

  EXCHANGE_RATE,

  CURRENCY_CODE

  IN v_item_id,.

  v_cust_id,

  v_Entity,

  v_rate,

  v_curr

  OF XXC_ORDERS

  WHERE INVENTORY_ITEM_ID is c_rec. INVENTORY_ITEM_ID

  AND CUSTOMER_ID = c_rec CUSTOMER_ID.

  AND BUDGET_ENTITY = c_rec. BUDGET_ENTITY;

  -AND EXCHANGE_RATE is c_rec. EXCHANGE_RATE

  -AND CURRENCY_CODE is c_rec. CURRENCY_CODE;

  EXCEPTION

  WHILE OTHERS THEN

  V_ITEM_ID: = 0;

  v_cust_id: = 0;

  v_Entity: = null;

  -v_rate: = 0;

  -v_curr: = null;

  End;

  Begin

  INSERT INTO XXC_SALES_BUDGET

  SELECT

  V_ITEM_ID,

  v_cust_id,

  v_Entity,

  v_rate,

  v_curr

  of the double

  WHERE THERE IS NO

  (SELECT 1 OF XXC_SALES_BUDGET y)

  WHERE y.budget_entity = c_rec. BUDGET_ENTITY

  AND y.customer_id = c_rec.customer_id

  AND y.inventory_item_id = c_rec.inventory_item_id

  - AND y.EXCHANGE_RATE = c_rec EXCHANGE_RATE.

  - AND y.CURRENCY_CODE = c_rec. CURRENCY_CODE

  );

  End;

  commit;

  End loop;

  End;

  (1) implementation of duplicates in the table XXC_SALES_BUDGET for the 2nd time

  (2) in my original query in the table XXC_SALES_BUDGET EXCHANGE_RATE, CURRENCY_CODE is NULL, but the test case above, it is punishable by fine

  Post edited by: added test cases 994122

  994122 wrote:

  How to avoid duplicates?

  Thanks John

  "Ostensibly you insert records with null for the column values. When you do this, it is query will be FALSE when you try to compare NULL with the NULL value because NULL = NULL is unknown (it is not true). NULL <> NULL is also unknown. You compare nulls using "IS NULL" "the #1 post . 

  
  

  I made a mistake in this conditions to not exist in INTO clause block where conditions and I added NVL on two blocks, now works well.

  AND nvl (y.currency_code, 'CCC') = nvl(c_rec.currency_code,'CCC')

  AND nvl(y.exchange_rate,1) = nvl(c_rec.exchange_rate,1)

  Question:

  in Zapex ( post #3 )

  MERGE INTO xxc_budget_history one

  USING (SELECT item_id,

  cust_id,

  DECODE (UPPER (BUDGET_ENTITY), 'ABC', '12', BUDGET_ENTITY)

  budget_entity,

  exchange_rate,

  currency_code

  OF xxc_cur_table

  WHERE item_id = 116) b

  WE (a.cust_id = b.cust_id

  AND a.BUDGET_ENTITY = b.BUDGET_ENTITY

  AND a.item_id = b.item_id)

  WHEN MATCHED

  THEN

  GAME UPDATE

  a.EXCHANGE_RATE = b.EXCHANGE_RATE, a.CURRENCY_CODE = b.CURRENCY_CODE

  WHEN NOT MATCHED

  THEN

  INSERT (EXCHANGE_RATE, CURRENCY_CODE)

  VALUES (b.EXCHANGE_RATE, b.CURRENCY_CODE);

  I tried with the above code when my table was below the values but getting even (the values are already validated)

  ITEM_ID	CUST_ID	UNITS_MONTH1	AMOUNT_MONTH1	EXCHANGE_RATE	CURRENCY_CODE	BUDGET_ENTITY
  116	836	0	0			12

  But I need to update as below with the existing values

  ITEM_ID	CUST_ID	UNITS_MONTH1	AMOUNT_MONTH1	EXCHANGE_RATE	CURRENCY_CODE	BUDGET_ENTITY
  116	836	100	110			12

  Thank you

  you do not see UNITS_MONTH1 and AMOUNT_MONTH1. How do you want to get the update? These two columns should be included in the SELECT, UPDATE and INSERT statements. Then only it will update

• "Your bootable USB key could not be created there is not enough space available on the disk.

  I am trying to install a partition of Windows 7 with an ISO on a flash drive with Boot Camp Assistant. Everytime I try it however, I get the error "your bootable USB key could not be created there is not enough space available on the disk. The flash drive that I use for this is 64 GB, so I doubt that the issue has to do with not enough available space. I have already tried the obvious, like reformat the flash drive and retry the write. Is there something I could hurt or do differently to make it work?

  MacBook Pro (retina, mid-2012)

  2.6 GHz Intel Core i7

  8 GB 1600 MHz DDR3

  NVIDIA GeForce GT 650M 1024Mo

  Use a 8GB drive.

• PC Backup Windows failed with 0 x 80780119 @ 0x8004231F on 3 TB external HARD drive

  the backup failed

  not enough space to create the volume shadow copy on the storage location. Make sure that, for all the volume to be backup, the minimum required disk space for the creation of shadow copies is available. for the best experience, we recommend at least 1 GB of free disk space on each volume was backup (0x8004231F)

  more information
  enough storage to create the copy storage file shadow or other shadow copy data (0x8oo4231F)
  my external storage is 3 TB

  Hi Van2000vtdee,

  Thanks for posting your question in the Microsoft community forum!

  I understand that you cannot create a shadow copy on the storage location.

  Please answer the question

  What is the file system used in the external drive, it's FAT32 or NTFS?

  If it's the FAT 32 file system in the external storage device, please convert it to NTFS.

  Please click on the link given below to change the type of the file system.

  http://Windows.Microsoft.com/en-in/Windows-Vista/convert-a-hard-disk-or-partition-to-NTFS-format

  Now, try to create the snapshot.

  I hope this helps! If you need assistance, please do not hesitate to post. We will be happy to help you.

• Acrobat Reader - not enough permissions to write to the disk

  Howdy,

  
  

  Tried to install Acrobat Reader DC on my MacBook. OS X 10.10.4

  
  

  Installation was immediately interrupted by this message:

  
  

  "The installation failed. Not enough permissions to write to the disk.

  
  

  Any help would be appreciated

  
  

  -Ned

  
  

  Hi Ned,.

  You have any Adobe application installed on your system, if so please check the permissions for the folder ~/Library/Application Support/Adobe (where ~ indicates your user directory).

  Select the Adobe folder, right-click and choose "Get Info" from the menu, expand the sharing tab and Permissions at the bottom of the window and check that your user account has the permissions read & write.

  If it doesn't matter what previous version of Adobe Reader is installed, uninstall it completely, restart your system & try to install Adobe acrobat reader Adobe - Adobe Acrobat Reader Distribution DCDC.

  Let me know how it goes.

  Kind regards

  Nicos

• Computer memory virtual is increased from 6 to 8 GB and now vm fails to power on with the error massage not enough resources to meet the HA failover, attached screenshot

  Computer memory virtual is increased from 6 to 8 GB and now vm fails to power on with the error massage not enough resources to meet the HA failover, attached screenshot

  The message is usually due to the Admission HA and reservations control configuration memory set on one or more virtual machines. With the default configuration HA calculates the sizes of slot based on the memory and CPU. Any reserve on a virtual machine could increase the size of the slot and lead to fewer available seats. What you can do is either to reduce (or eliminate) reservations about the VM (s) or set admission control to a percentage rather than the host failures tolerated.

  André

• Disco of VmWare Converter problema su spazio - ERROR: failed to create a snapshot of a volume of the source. Possible causes include not seen all NTFS volumes on Windows XP or Windows 2003 source systems with no is not enough free space on the disk.

  Buongiorno,

  Devo connvertire con vmware converter one Nt Server con AC 450MO di spazio libero su disco C: ntfs file system e

  Ricevo this error:

  ERROR: Impossible to take snapshots of a volume of the source. Possible causes include not seen all NTFS volumes on Windows XP or Windows 2003 source systems with no is not enough free space on the disk.

  He problema e che no ho the possibility di līberō altro spazio.

  Some suggestions?

  Grazie in pre-empted.

  Anni fa it era questa versione di VMware Converter: https://dl.dropboxusercontent.com/u/2197180/coldclone.3.03.iso che permetteva the clonazione a freddo. :-)

• create the database fails with ORA-27102 - not enough memory

  Hello
  
  I have server Solaris 10 with 16 GB of ram. On that, there are 10 databases (8 of them 9.2.0.7 and 2 of them 10.2.0.4) running - but they have a small LVO-300 mb each (about even smaller 200 MB or more). Now, I have to create two more data on this database. When I try to create the db, it fails with the error:
  
  Connect to an instance is idle.
  ORA-27102: out of memory
  SVR4 error: 22: invalid argument
  
  And the journal of alerts meesages as below:
  Starting ORACLE instance (normal)
  Tue May 26 07:37:39 2009
  WARNING: EINVAL creation of segment size 0 x 0000000029002000
  Difficulty shm parameters in/etc/System or equivalent
  
  See also the output of this command:
  
  prctl - n Project.Max - shm-memory - i user.root of the project
  project: 1: user.root
  NAME PRIVILEGE VALUE FLAG ACTION BENEFICIARY
  Project.Max - shm-memory
  3.92 GB privilege - deny-
  system 16.0EB max deny-
  
  Now, I tried to change that with this command (as suggested in the installation guide):
  prctl - n v Project.Max - shm-memory - 8 GB - r-i user.root of the project
  
  but I still don't have the same error. So I refer to Metalink document 399895.1. It is said that manually change the settings in/etc/System. This requires a reboot and I had prior to do this restart tomorrow. But my question is: what are the values that I should put in this file? + as suggested in the note, if I put the values below? -
  
  For example, a value of the sample (mentioned in the note) are: for entry system/etc/setting SHMMAX = 6 GB.
  
  Set shmsys:shminfo_shmmax = 6442450944
  Set semsys:seminfo_semmni = 1024
  Set semsys:seminfo_semmsl = 1024
  Set shmsys:shminfo_shmmni = 100
  
  or should I put some other values (for all parameters as semmni, semmsl etc.)? I missed that I should be by specifying values.
  
  Thank you
  
  Published by: orausern on May 26, 2009 07:24
  
  Published by: orausern on May 26, 2009 07:27

  I'm not a Unix system administrator, but I think that your steps are correct - pl check with your Unix system administrator

  Srini