Windows 7 backup failed, saying: not enough space still there clearly is... What is happening?

Similar Questions

• "Backup failed. Not enough storage space.

  Original title: image

  W7 32-bit HP. Use the image via Control Panel with success for a long time. However, this morning received the message "backup failed. Not enough storage space. Have you checked and at least ten times more space on the destination like this drive would be necessary for the entire image.  The only change I've made since the last successful backup is to install an SSD on my computer as the main C drive.

  Thanks, but none of it has hit the problem!

  I now it worked. For the benefit of any person who has the problem, Image requires that there is enough space on the * source * system partition of the drive for the shadow file (when get "space insufficient" messages everyone (including me) assumes respect to the * destination drive!)  (Not so).

  This seems to happen to a lot of people who are for the first time in an SSD. Because I had previously shrunk the partition on my drive C primary, preparatory to mounting small SSD (112 GB), the system partition was too small for shadow of the image file.

  Under W7 disk management even if the main partition on the C drive could be reduced to create a space unallocated, the space could not be assigned to the system partition as requiring a contiguous space.

  So I used (free for home) Easus Disk Manager to create space * before * the partition main c and then expanded the system inside partition, making this system partition that is large enough. Everything worked well then!

• 702 Installer fails with not enough space in / tmp

  Trying to install coldfusion702 on solaris. Fails to complain about not enough space in / tmp (I got 10 GB). Tried to download the file again (assuming that possible corruption). Tried to place somewhere else in the tmp setting IATEMPDIR var. Nothing seems to help.
  
  Hope that someone has encountered something like this and can offer a solution. Maybe I'm missing something or a package. In the result below, ' expr: non-numeric argument ' caught my attention - I have the feeling that the script fails to the analysis of output of the df command.
  
  Thank you
  Henry
  -command line output-
  ./ColdFusion-702-sol.bin
  Preparing to install...
  WARNING: / tmp has insufficient disk space!
  Attempt to use/export/home/username for install base and tmp dir.
  expr: non-numeric argument
  
  CAVEAT! The amount of disk/tmp space required to perform the
  This facility is superior to what is available. Please
  release at least 0 kilobyte in / tmp and try this
  Setup again. You can also set the environment IATEMPDIR
  variable to a directory on a partition to free enough disk
  disk space. To set the variable enter one of the following
  commands at the prompt of UNIX before running this command line
  Once again the installer:
  

  Just in case where someone else encounters this problem, here is the solution, my colleague helped me to understand.

  install the script analysis through the output of the command df to calculate the space in / tmp or any other temporary location for the installation files. If you have a large amount of space allocated to the/tmp (on solaris, it would be 5 GB or more) the output will look like this:
  / tmp (swap): 19773408 blocks 400226 files
  Note that there is no space between: and the size, the installation script is looking for the 4th field, which is in this case the word 'blocks' which is obviously false.

  To work around it, we have created a temporary script with filename "df" which replaces the df command:
  #! / bin/sh
  / usr/sbin/DF | tr ":" " "
  and the PATH has changed to have this temporary location of script at the beginning. This allowed the installer to run as it simply replaces: with space.

• How will I know that I can uninstall it? It says "not enough space on drive D.

  Original title: How do iknow, I can uninstall when I said im my running out of space

  not enough space on drive d

  Hello

  You may have a serious problem that you can't solve yourself.

  Click Start > computer > see if D: is the recovery drive and in this case it must be sized anywhere between 5-15GBs about.

  If it fits this description, you should contact the manufacturer of your computer, as they placed this hard disk recovery disk.

  The recovery disk is placed there only for you to reinstall the operating system if you have a bad system crash recovery disk to reinstall the operating system in the event of total failure of the hard drive.

  The recovery disk is cannot be used for these purposes.

  The manufacturer will help you fix it.

  If this is not the recovery disk please post back.

  See you soon.

• 10.1.2 6640838 YES to 10106 fails with not enough space on the large disks

  I have 12.1.3 on 64-bit SLES 11 on a mount point 24 TB 19 TB free. When I try to apply 6640838 YES CD PLACE HOLDER ON ARU to 10106 by upgrade OracleAS g 10 forms and States Oracle E-Business Suite Release 12 [437878.1 ID], I get an error the installer who said not enough disk space available for Oracle Home. Please make sure you at least 886 KB of free space and try again. I already tried with - IgnoreSysPrereqs. Any other tips to apply a patch shapes on a large YES mount point?
  
  Thank you

  Please see (10.1.x group application patches fails on Partition greater than 2 terabytes [1338204.1 ID]).

  Thank you
  Hussein

• When I try to download lightroom it say not enough space

  It does not have enough space.

  Hello

  This link may help: 5 Lightroom "out of memory" error message

  Kind regards

  Sheena

• Can not backup on USB drive, says that there is not enough space, but there are many

  I was able to save only once.  the total size was about 4.2 billion.  Now XP doesn't let me put anything on the drive flash 8 bigger than 4,2 g. I tried to crush, deletion, reformatting, renaming - you name it.  I can put large files on the flash drive with other computers, so there must be something done XP.  In properties, it shows a lot of space, but I still get the full message of media

  Well even if you have too many files, size does not matter in the folder root of the USB then
  You can not copy more to it... try to reduce the number of files in the root folder. Try to copy everything
  the files on your hard drive and remove it from the USB and try to copy your file to it. Rob - bicycle - Mark Twain said it is good.

• some of my incoming email bounces (message says not enough space)

  I livemail lack of space is not the problem.  I receive emails more smoothly, as well as I have deleted all and continue to receive messages from rebounds.  Thanks for any help

  Thank you for visiting the Microsoft Answers site.

  The question you have posted is related to Windows Live Mail and would be better suited to the Windows Live community. Please visit the link below to find a community that will support what ask you:

  http://windowslivehelp.com/product.aspx?ProductID=15

• Cannot save game because the game get say not enough space, but I have 15 GB of space

  recently, when I was playing the devil may cry and resident evil, after I play I try to save the game but the game invites a massage to say save failed and the game must at least 200 KB to save the game, the problem is that I have 15 GB of space on my hard drive, how is, I can't save the game?

  Ok.

  When you go to save the game, you get the option to select the partition or volume on which save?

  Worth a try to save the game after you have uninstalled the antivirus program.  This way you can reject if the antivirus interferes. If you find my answer was what you're looking for, remember to click on the link "Propose as answer" below.

• HP Jet x 360: not enough space for the full Windows 10 upgrade

  Just got a HP x 360 for my granddaughter stream.  Indicates its eligible for the upgrade of Windows 10.  When I try to install it through the process, but before it ends and the error comes up saying not enough space. I have to add memory and if so, how.

  Monkey,

  The computer may be running out of physical space required for migration instead of memory needed to actually to crunch the numbers and run the migration program.

  The migration process uses more than 10 GB of space on your computer.

  Please take a look on the following document, including the important notes section.

  Specifications for Windows 10

  Excerpt:

  • Latest OS:

    Make sure you run the latest version of Windows 7 SP1 or Windows Update 8.1.

    Don't know what version you use? Click here to find out. Need to download the latest version? Click here for Windows 7 SP1 or Windows Update 8.1.

  • Processor:

    1 gigahertz (GHz) processor or more fast or SoC

  • RAM:

    1 gigabyte (GB) for 32-bit or 2 GB for 64-bit

  • Hard disk space:

    16 GB for 32-bit OS 20 GB for 64-bit operating system

  • Graphics card:

    DirectX 9 or later version with WDDM 1.0 driver

  • Display:

    800 x 600

• Unable to save my project. It says "not enough memory to process this command."

  It says "not enough memory to process this command" what should I do?

  Dictate the maximum size of your system
  resources and free space on the hard disk.

  As you have posted in a forum of Vista, I guess
  you are taking Vista Movie Maker 6?

  How much free space is available on your hard disk
  by car? And... What is the duration of your project?

  It is sometimes possible to publish / save in the
  Even if the DV - AVI format. WMV fails. If you are
  running Vista Movie Maker 6.see the following:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  WIndows Vista Movie Maker 6
  The following chart shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

  And sometimes unchecking that will enable all filters
  registration in progress...

  Reach... Tools / Options / compatibility... tab and
  Uncheck all filters / OK.

  The error that you received can be caused by the following:

  (1) source incompatible or damaged files (photos,
  video clips, audio clips).

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  (2) the project is too big or too complex for your system
  resources. Made video is time CPU and
  can sometimes cause blackouts.

  The following items may be worth a visit:

  Movie Maker - problem resolution - "cannot record a movie.
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Windows Movie Maker error
  Cannot complete the Save Movie Wizard
  http://moviemakererror.blogspot.com/

• Not enough space

  We have an iMac and MacBook 2 backup on a capsule 3 TB. It now says not enough space. Should it not be automatically delete older backups to free up space. I have to start over and do a back up of all three computers?

  About alert TM "Backup Drive is full"

  TM only deletes older files if they have been removed from the source and when TM needs space on the backup to a new incremental backup drive. Time Machine "Jules Destrooper" its backups. over 24 hours, old backups, except the first of the day; These "dailies", old more 30-day backups, except the first day of the week. The weeklies are kept as long as there is room.

  So, how long a backup rest file depends on how long it was on your Mac before being deleted, assuming that you do at least one backup per day. If she was there for less than 24 hours, it will be maintained for at least a month. If she was there at least a week, it will be maintained as long as there is room.

  Note that, on a Time Capsule, the sparsebundle grows in size as needed, but not descended. View of the user of the TC so it seems that no space was released, although there may be space in the sparsebundle.

  Once TM has found that it cannot free enough space for new backup it reports the disk is full. You can erase the backup disk and start your backup or replace the disc with a larger drive.

• Not enough space for music DB and must free up space

  My Sansa was working fine and then I downloaded music on the sansa. Then it says not enough space for music DB and I need to clear 90 MB. I was downloading music on the sd card in the mp3. Now when I plug it into my computer it will not sync with my Media Player. I deleted all my music from my Media Player and synchronize it manually upwards and it will not always remove the song on the sansa. Please help someone!

  Use the Format function in the settings menu to erase the memory completely and read this FAQ.

• Unable to create restore point not enough space error code 0 x 80070070

  My D recovery drive is almost full. I have over 900 GB on my c drive and I have 600 GB free on an external drive. always says not enough space. What is the remedy. Thanks Frank

  Looks like it has to do with one of the partitions on your hard drive.

  Go to start > Control Panel > system and security > administrative tools > computer management > disk management. From there you should be able to see what drives you have connected and all partitions (reserved for the IE system, recovery, etc.)

  Can you tell me what operating system the computer brand you use and on your drive C: drive, which partitions there (and how many MB each partition has?

• Windows 7 says that my drive is not enough space - when it is almost empty.

  I've been moving files from one disk of 1 TB on an empty 2 TB drive. So far, I moved on 200 GB on 2 TB drive. Twice today for moving groups of files that were 3 to 10 GB, my machine was told that he was not "enough space" on the reader target when there was, indeed, 1.6 TB of space empty remaining. After clicking on the 'try' new 'button' about 15 or 20 times, the machine is softened and allows me to move the files.

  The target disk is new and has no bad sectors and on which I run chkdsk today.  I never saw this problem in Windows XP.

  Taking into account the comment of Joel, what it has always been faster use copy it / stick and then delete the old file that order, use the command move.