inside printing with HP Officejet Pro 8000 prints pages out of order

Similar Questions

• Printing of booklet with HP Officejet Pro 8000 A809n

  Do any one help on printing of booklet? I looked at other messages and none seem enough to cover my problem.

  I want to print from Microsoft Office Publisher 2003 and have a PC running Windows XP.

  The booklet needs to print a4 (297 x 210mm) paper landscape format as well as 2 pages (A5) by hand.

  Prints what is portrait with 4 pages per sheet (format A6) with printing on the reverse back.

  I tried all combinations of landscape and portrait etc and nothing works. As I have to do these books very often in the future I want to sort as soon as possible.

  Thanks for any help.

  Hi there tallboy,

  This microsoft article should help with getting facility brochures and printed. Let us know if it helps.

  Good luck!

• HP OfficeJet Pro 8000 Wireless: Can I get some help here? Yellow ink will not print - HP OfficeJet Pro 8000 Wireless

  No matter what I do, ink yellow does not print, or stops at halfway printing on the page. I use genuine HP cartridges. There is a lot of ink - in fact, I just installed a new cartridge in the case where a previous (almost complete) was defective. No change. The pipe is not pinched. I flashed the firmware more recent and installed all drivers and utilities updated. I have cleaned the print heads over and over again and even took and cleaned according to the instructions.

  I think it was a sign that the printer is worn EXCEPT - just a few months ago, magenta and black stopped printing. These are the opposite printheads. When I uninstalled every bit of HP software I could find, the printer back to normal!

  The only thing I did not - it is the HP Toolbox argues that it is impossible to establish two-way communication with the printer. The patches for this involve get under the desk to play with the power cord and USB cable (even if it is a wireless printer), and my arthritic knees that make a very delicate operation. Two-way communication IS enabled.

  I'm about to start crying. I fought with this market a week, when the yellow all of a sudden went - once again, * most * of the time, but sometimes it prints to maybe an inch of the image before disappearing. Help!

  Hi @Echo2,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you use a HP Officejet Pro 8000 printer with a Windows 7 computer and all of a sudden is not printing yellow ink. I would like to help with that.

  Here is a document of support for the print quality problems - Troubleshooting print quality problems.

  Please let me know if that solves the problem, or if you need assistance.

• HP Officejet Pro 8000 - guard alignment page printing

  I had trouble with black ink print does not correctly so after several cleanings I decieded to manually clean the print head. I took the printhead of the printer then whipped cream, the part where the ink comes out with a most paper towle. After that I put the print head in the printer prints a print alignment page. Ok. Now, every time I have print whatever it is that the printer will be after the print job is printing another page of alignment. Is there a way to stop? Thanks for your help.

  Hello TheDeerSlayer,

  When you clean the print heads, you should try to not clean the part where ink is coming out of it (nozzles). It is very easy to damage them and if it happened, most likely the only way to solve the problem is to replace the print head. There are two things, you might try to see if you can get the print head working properly again: first thing is to clean the sensor that checks the nozzles. It is located on the right side of the printer at the bottom of the area in which the cart moves, it looks like a strip of metal which is only visible when the transport is located on the side more to the right of the printer. Be sure to use a cloth moistened with cold water. What you might try if this does not solve the problem and the nozzles are just clogged with ink and not really damaged, is to heat water (almost boiling point) and then soak the part of the printhead whith the nozzles in the water for some time. Let the printhead to dry and then install again and see if it works now.

  This picture is of you can location of the sensor that checks the print head nozzles. The image is not so great and is an another printer, but it is located in the same place on Officejet Pro 8000.

  

• OfficeJet pro 8000: Officejet pro 8000 prints the part of the document

  Have a problem with both networking Officejet pro 8000's. If you print a paginated document 4, printing two pages and stops, then 2 minutes he feeds a white sheet of paper in the printer, the printer hangs then error light on, who need to power cycle to restart. The network is in a school, unused printers for a few weeks, before now, they both work as it should.

  This problem is with a laptop with free Wi - Fi. However, even 4-page document sent to another that officejet pro 8000 prints as it should, and prints as it should when sent to a photocopier.

  The network of small schools there are ten computers wired to office, after trying to print from one of them, the same problem occurs with 2 of 4 pages printing, then a white sheet, then the printer hangs. This desktop computer will also print the same document on the photocopier without problem.

  Not very well where to go with this, help please!

  Problem solved, simply wanted the new cartridges!, but what I do not understand why the part of a document of four pages would be absolutely fine print, all the colors print as they should, then stop and hang. Power cycle printer, exactly the same result. Exactly the same on both 8000 printers?

• HP Officejet Pro 8000 Wireless: Unable to print labels on my HP Officejet Pro 8000 Wireless color inkjet printer

  Hello Forum,

  I don't want to appear redundant, however, I always have the same problem, cannot print on different media (for example. Labels, Matt / glossy papers, etc.) other than plain white paper. As I said in my original post (below), I tried different settings, different programs, etc., without any result. The printer does that pass through without printing media, leaving the error / blinking yellow light.

  I believe that this printer is able to manage different media other than paper white just to 'stick '. Again, I ask your help to solve this problem. It is and has been, very frustrating trying to overcome this restriction of printing!

  Thank you all!

  (Original post)

  I can't get my HP Officejet Pro 8000 Wireless inkjet color printer to print CD / DVD labels. I have tried various printer / paper options but the printer just feeds the media (in this case 'Fellows' brand matte CD 2-top) then spits it right back with result error amber light flashing.

  Printing has a sensor that determines if the paper is loaded and feeding properly into the printer.  If you print on media that is colored or printed features we can confuse the sensor.

  One thing to try - cut a strip of the sticky part of a post-it note maybe 1 "wide by 1/4".  Attach it to the top left of the sheet of labels on the side to be printed, the long side on the short side of the paper.  This will then put face down into the printer, with the band on the upper right of the tray paper.  After printing, you can remove it and reuse it for the next page.

• OfficeJet Pro 8000 prints multiple pages of the same document

  Info:

  HP Officejet Pro 8000 A809a

  Windows 7 Pro 64-bit

  Last driver and firmware from HP

  When a job is sent to the printer (web, Word, Acrobat, etc.) the printer keeps printing multiple pages of the document.  Sometimes it will print the first page and a second partial page, then it reprinted again and stop at the same place on the partial page.  She does over and over again.  I ran the HP Diagnostic Utility and it was impossible to print a test page, even after turning the power on power off, then on.   Any suggestions, or is * another * bad printer?  The first was sent and replaced, so I think that this model is just a lemon.

  Thanks for the suggestion, but it didn't work.  I tried to reinstall the driver altogether package three times with no result.  I ran the utility programs that supposedly allows you to solve problems, but public services could not even to generate a test page.

  It seems that I finally found a solution, however.  I installed an older driver for MS Vista 64-bit, and that seemed to do the trick.

• OfficeJet Pro 8000 double-sided printing will not respond to the control software #2

  Win XP Pro SP3

  OfficeJet Pro 8000 Wireless

  Does anyone know why Officejet Pro 8000 had control of double-sided printing, removed from the spec software?

  Does anyone know if there is a printer of this type which will respond to such control?

  UPDATE!

  ----------

  This printer is now works very well with total control on duplex printing. But how did this happen...?

  Two things have changed - well, maybe three.

  But first of all to mention another very annoying problem: wireless printer to my network connection always collapsed which was a double nuisance (23/06/2016 see also installing the driver wireless Officejet 8000 Pro says default gateway is 0.0.0.0)

  The road to happiness... I've finally updated my PC to a laptop HP Win7 (there is a problem with the laptop, but that's another story...)

  During the process of setting up laptop, I had to set up the network and add the printer. In between aid was a FAQ something like "the wirless connection drops regularly." What interested me.

  The fix was so simple - mychosen IP address has always been in the DNS range which was probably not very smart, but I didn't know any different. No one had ever mentioned before.

  The idea is to select an address in the static range IE outside the DNS. So I took a number x.x.x.249 and bingo!, a solid and reliable connection that is always there.

  Given the new laptop for download the drivers again. What went well and of course, the new machine is much faster.

  Anyway after a few tries, much to my delight I discovered that two-sided printing worked with auto rotation if I check the box. Printing a document like that I would see in portrate (horizontal spine) and read down the two pages, turn to the next page and the same thing at the end of the document. Or, if you use the rotation of non - normal mode - the printing orientation is 'normal '.

  It's a shame that it was necessary to buy a new laptop with a new o/s just to discover the problem by chance...

• HP Officejet Pro 8000 Wireless printer: Always be streak on copies vertical white

  HP Officejet Pro 8000 Wireless printer: Still get a vertical white streak down the photos. I changed the yellow/black printhead. Only one aid note said I should try to clean the scanner glass. Where is the scanner glass, and how to do for her?

  Other options to get rid of the vertical line?  Thank you.

  Hello

  It sounds like a problem with the printer itself, because it is indeed a vertical GIS. A cartridge problem would cause a horizontal issue. You can tru is the cleaning of transport, stem from the metal bar that you see in the printer, and carefully clean the Strip transparant. This with a lot of attention that its rather delicate and if it breaks the device is ready for the trash.

• My Officejet Pro 8000 A809 do not print, but there is no error message

  When I try to print on my Hp Officejet Pro 8000 from my Windows 7 laptop wireless, the laptop is of the view that printing took place. I get no error message. But nothing comes out of the printer. Sometimes this small error on the printer flashes, but because the laptop thinks everything is fine, I can't understand why. I've run the troubleshooter, who says he has no problems, and rebooted the printer and the computer more than once as well. My printer (HP Officejet 6500 a) wireless works fine. Does anyone have a suggestion?

  Thank you for your help.

  Kat

  Thank you for you a message.  My printer worked fine with my Windows 7 laptop as I upgraded from Vista in May.  This the first time this problem has occurred.  I have change a color ink cartridge in the morning that it has stopped working.  But, he continued to work for about 3 hours after the replacement of the cartridge, so I don't really think that's the problem.

  One of the tools of diagnosis HP can help: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=3760410#N686

• HP Officejet Pro 8000 Wireless: Download for Officejet Pro 8000 Wireless printer driver

  I've been looking for a printer driver download for my HP Officejet Pro 8000 Wireless printer, but unable to find one and the web page keeps just leading me in circles.  I'm under IE 9.0 and Windows 7 Professional.  Could you give a link to download the driver?

  See this:

  http://support.HP.com/us-en/document/c02266980

  or

  http://support.HP.com/us-en/document/c02693964

• OfficeJet Pro 8000 - is no longer prints borderless print after upgrade - Tiger for the Mac Snow Leopard

  Mac OS X 10.6.8

  HP Officejet pro 8000 A809

  Wireless

  HP Photosmart Studio v. 9.7.4

  After upgrading from Tiger to Snow Leopard I lost the ability to print without MARGINS - until that time, that I had no problem.

  I use HP Photosmart Studio to print, but get the same error every time: "the selected printer supports the paperwork without borders. If you print, will serve the maximum printable area of the current paper size.

  I downloaded the most current driver after that I improved and I was able to print in general - when I try to select borderless printing it tells me that this printer does not support. I was able to print without margins using Creative Suite Indesign and printing of this app--but have lost the functionality of the HP Photosmart Studio is really a drag - since I have to do all sorts of adjustments to do workaround printing.

  Is it possible to upgrade Photosmart Studio? or re-start it? I'm lost and need help.

  Thank you

  If you always reminants of the HP software meant for 10.4, you must uninstall the software by using the "scrubber".  If you have already uninstalled, reinstall from the CD, then:

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall< scrubber="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Finally, download and install the "Full Featured" driver and software from the "Support & drivers" link at the top of this page.

• HP Officejet Pro 8000 printer - A809a. Drivers not installed

  I have a wonderful printer HP Officejet Pro 8000 - A809a used exclusively as a network printer and works PERFECTLY. Yet, I have errors reported about drivers not installed in device (Windows 7, 64 bit Ultimate) Manager.

  These are:

  1] adapter Multifunction (x 1)

  -Officejet Pro 8000 a809

  The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.

  To find a driver for this device, click Update driver.

  AFTER DRIVER SEARCH:

  Windows could not find a driver for your device

  Try to use the drivers of "OJP8000vA809_Basic_14.exe" has been a failure.

  2 other devices (x 1)

  Same as above.

  [3] printers (3 entries)

  -HP Officejet Pro 8000 A809 Series. (This is the only good entry)

  Properties:

  The device is functioning properly.

  -b. Officejet Pro 8000 A809.

  Properties:

  The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.

  To find a driver for this device, click Update driver.

  AFTER DRIVER SEARCH:

  Windows could not find a driver for your device

  Try to use the drivers of "OJP8000vA809_Basic_14.exe" has been a failure.

  -c. Officejet Pro 8000 A809.

  Properties:

  As above.

  Disabling or even uninstall these additional entries have no effect on the function of network printer.

  BUT they continue to be replaced after the reboot.

  This situation will affect the perfornce of the computer.

  Any suggestions, please?

  Advance thanks.

  Thanks for the great instructions.

  Now I'm showing only a single instance of the printer asking for drivers multifunction adapter in Device Manager. Therefore, I uninstall and long and shows no return once again.

  One thing FO, this printer is not actually a multifunction type.

  The system is currently NOT error display or ask drivers.

  I'm hopping it will stay like that.

• HO Officejet Pro 8000 wait long for printer to respond

  I have an Officejet Pro 8000 A809N and am having to wait like 5 minutes for my print jobs print.  I get also two series of prints, instead of the 1 I ask

  Hi Jenny and thank you for getting back to me!

  I suggest to remove the printer from your printing system, using this document: uninstalling the software of the printer.

  Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

  I also run your Apple updates: OS x: Mac App Store apps and OS X update

  After the updates, I recommend the printer time: installation and using the printer on a Mac.

  Good luck and please let me know how it goes!

• HP Officejet Pro 8000 printer range makes the vertical white lines

  My HP Officejet Pro 8000 printer makes white vertical lines around text and photos.  What can I do?  I use Windows 7.  As far as I can see, the print heads don't need to be changed. Cleaning them would help? If so, how can I clean them? Thank you.

  Hello

  You can try the steps listed in this document:

  Troubleshooting print quality problems

  Let me know if it helps