HO Officejet Pro 8000 wait long for printer to respond

Similar Questions

• HP Officejet Pro 8000 Wireless: Unable to print labels on my HP Officejet Pro 8000 Wireless color inkjet printer

  Hello Forum,

  I don't want to appear redundant, however, I always have the same problem, cannot print on different media (for example. Labels, Matt / glossy papers, etc.) other than plain white paper. As I said in my original post (below), I tried different settings, different programs, etc., without any result. The printer does that pass through without printing media, leaving the error / blinking yellow light.

  I believe that this printer is able to manage different media other than paper white just to 'stick '. Again, I ask your help to solve this problem. It is and has been, very frustrating trying to overcome this restriction of printing!

  Thank you all!

  (Original post)

  I can't get my HP Officejet Pro 8000 Wireless inkjet color printer to print CD / DVD labels. I have tried various printer / paper options but the printer just feeds the media (in this case 'Fellows' brand matte CD 2-top) then spits it right back with result error amber light flashing.

  Printing has a sensor that determines if the paper is loaded and feeding properly into the printer.  If you print on media that is colored or printed features we can confuse the sensor.

  One thing to try - cut a strip of the sticky part of a post-it note maybe 1 "wide by 1/4".  Attach it to the top left of the sheet of labels on the side to be printed, the long side on the short side of the paper.  This will then put face down into the printer, with the band on the upper right of the tray paper.  After printing, you can remove it and reuse it for the next page.

• HP Officejet Pro 8000 Wireless: Download for Officejet Pro 8000 Wireless printer driver

  I've been looking for a printer driver download for my HP Officejet Pro 8000 Wireless printer, but unable to find one and the web page keeps just leading me in circles.  I'm under IE 9.0 and Windows 7 Professional.  Could you give a link to download the driver?

  See this:

  http://support.HP.com/us-en/document/c02266980

  or

  http://support.HP.com/us-en/document/c02693964

• HP Officejet Pro 8000 - guard alignment page printing

  I had trouble with black ink print does not correctly so after several cleanings I decieded to manually clean the print head. I took the printhead of the printer then whipped cream, the part where the ink comes out with a most paper towle. After that I put the print head in the printer prints a print alignment page. Ok. Now, every time I have print whatever it is that the printer will be after the print job is printing another page of alignment. Is there a way to stop? Thanks for your help.

  Hello TheDeerSlayer,

  When you clean the print heads, you should try to not clean the part where ink is coming out of it (nozzles). It is very easy to damage them and if it happened, most likely the only way to solve the problem is to replace the print head. There are two things, you might try to see if you can get the print head working properly again: first thing is to clean the sensor that checks the nozzles. It is located on the right side of the printer at the bottom of the area in which the cart moves, it looks like a strip of metal which is only visible when the transport is located on the side more to the right of the printer. Be sure to use a cloth moistened with cold water. What you might try if this does not solve the problem and the nozzles are just clogged with ink and not really damaged, is to heat water (almost boiling point) and then soak the part of the printhead whith the nozzles in the water for some time. Let the printhead to dry and then install again and see if it works now.

  This picture is of you can location of the sensor that checks the print head nozzles. The image is not so great and is an another printer, but it is located in the same place on Officejet Pro 8000.

  

• My Officejet Pro 8000 A809 do not print, but there is no error message

  When I try to print on my Hp Officejet Pro 8000 from my Windows 7 laptop wireless, the laptop is of the view that printing took place. I get no error message. But nothing comes out of the printer. Sometimes this small error on the printer flashes, but because the laptop thinks everything is fine, I can't understand why. I've run the troubleshooter, who says he has no problems, and rebooted the printer and the computer more than once as well. My printer (HP Officejet 6500 a) wireless works fine. Does anyone have a suggestion?

  Thank you for your help.

  Kat

  Thank you for you a message.  My printer worked fine with my Windows 7 laptop as I upgraded from Vista in May.  This the first time this problem has occurred.  I have change a color ink cartridge in the morning that it has stopped working.  But, he continued to work for about 3 hours after the replacement of the cartridge, so I don't really think that's the problem.

  One of the tools of diagnosis HP can help: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=3760410#N686

• HP Officejet Pro 8630: Internet connection for printer

  Hello

  I recently bought a HP Officejet Pro 8630 all-in-one printer and currently it hooked to my computer via a USB cable.  Everything works fine.

  I want to participate in the program of alternative to instant ink HP Service.  To do this the said program brochure that I have my printer is connected to the Internet.  I have never made a connection like that.

  Currently, I don't have a cable modem wireless.  Do I need to have a cable modem wireless to connect my printer to the Internet?  If this is not the case, how can I connect my printer on my existing cable modem?

  My cable modem is: Motorola SURFboard of SBV5220

  Thank you

  Mark

  Hello

  Your printer needs to have an ethernet port in the back, where you can connect a LAN cable. You will need to connect a LAN cable to a free port on your current modem on the back of the printer - this should establish an internet connection.

  

• OfficeJet Pro 6830: replaced warranty for printer and cartridges of manipulation

  My Officejet Pro 6830 AiO printer doesn't have 3 months after purchase (power supply is ok, but it no longer lights). I contacted HP support and a replacement printer is on the way.
  Unfortunately I replaced all ink cartridges 'setup' 4 with brand new just a few days before the failure of the printer, so I asked the Lady to support (good person) if and how I can recover the defective device.
  She told me to take off the cartridges of the faulty unit and retain them for the replacement printer, but was to serve once the "setup" cartridges sent with the unit will be out of ink.

  Now, I have some doubts:

  (1) when I take my full semi the defective printer cartridges, I fear that the ink will start to dry... should I cover the opening at the bottom of the cartridges with tape? Will it be enough?

  (2) the ink in the printhead of the defective unit will start to get dry as well. The defect of the device is clearly in electronics, while the print head has worked perfectly. Isn't bad to leave the print head is clogged by dry ink? I still have empty cartridges "setup" out (differentiation 'stock' of waste...) should I put them on the print head?

  (3) the defective printer does not turn so to loosen its cartridges, I need to manually pull the cart of the printhead to the center position. Is it Ok?

  Thanks to all those who will clear this point to me.

  Hi @RickyGold,

  Welcome to the HP Forums!

  I see that you have questions about your printer HP Officejet Pro 6830. I am happy to answer these questions for you!

  To answer your questions:

  1. To properly store the cartridges, I suggest you put them in an airtight container, such as a ziplock bag or Tupperware. Make sure that the contacts on the cartridges are not touch anything.
  2. I wouldn't worry about the obstruction with the defective printer printhead.
  3. I suggest to try to move the cartridge door manually, but don't force it, if it will not move freely. If you are unable to get the cartridges, please contact HPtelephone support for further assistance. As they would be able to replace the cartridges for you. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Hope that answers your questions and have a nice day!

  "Please click the Thumbs up icon below to thank me for having responded."

• HP Officejet Pro 8600, bad size for printing of the Corel product in the suite

  When I try to print a job with Corel Photo-Paint, Corel Draw, I can't print the same size I see on the preview before printing of the program. For example if I want to print an A4-sized photo, printing out a sheet with a copy of a porzion of photography, as if the sheet does not match.

  In the Corel print configuration, for the orientament of the page, I 'Use the default printer' but for the dimension it is not anything, but with my previous printer, this setting out from the printer driver.

  Please help me, because I work a lot with this two program, if I cannot print I have to change the printer with each other!

  Thank you

  Hello Travis,

  Beatifull! Your solution is ok, now, the impression of the project was the right size.

  The driver for Deskjet 6980 it seems to work perfectly. I think that this interface is better for officejet driver. There the preview before printing for example, and I think I'll use it.

  Thank you!

• My officejet pro 8000 just started to print an alignment page after each print job.

  Ive had my printer for about a year now with no problems.  Then I got the message that I had to clean the print heads I did it in the machine and manually. I found one of the printhead was damaged then succeeded him. Now, AFTER each job, it prints a page with lines down on the side of the page and gibberish.  This, of course, consumes a lot of ink, so how can I solve this?

  Ive tried re-initialization of the printer by pulling the power cord and USB cord, but it does not work.  There is no screen but I followed the tutorial online to set up the printer, but it does not help also.   Ive checked for new drivers, and there was none.  Any suggestions?

  This seems to have solved the problem.  Thank you for your attention to detail and timely responses.

• HP Officejet Pro 8000-only 1 color prints

  After that I changed all three dimensional ink, only prints magenta (and black) color. I tried to clean the heads, but again only black and magenta show.

  If performing the steps described in the document I have provided in the Message 2 not resovle the issue, I suggest to call HP. You may need new printheads, or perhaps you could get a discount on a newer model of printer.

  The number of call HP is 1-800-474-6836 for the Canada and the United States, or you can Contact HP worldwide.

• OfficeJet Pro 8000 a809: black only printing

  Why my printer will not print black when color cartridges are low or empty?

  Hello

  To protect itself damages normally do to the "missing" items (in this case the inks that can cause damages its print heads) it stops printing, even during the warm-up of the process.

  Hope it makes sense.

• HP Officejet Pro 8000: Deficiencies only in print in black at the same place on the page, enough new printhead

  Have run diagnostics and repeatedly cleaned print heads, calibrated etc, but still get breaks in the prints in black, in the same places, regardless of what is printed and on the entire page. Attached pictures show a print quality. Thank you, in advance.

  

  Thank you! It is a new printhead HP and this is the one. Contacted dealer today and I come to replacement/Exchange.

  Had read these articles, but wasn't sure if there was something that I missed.

  Thank you, again.

• Ink levels HP Officejet Pro 8000 809

  Why can't determine the ink levels on my HP Officejet Pro 8000 with the tab printer HP Print and Scan Doctor?

  Hello HPPete,

  Welcome to the HP Forums.

  I see that you are having a problem with getting the HP print and scan from doctor to show ink levels. I will try to help you with this.

  To start, make sure that the version of the PSDR that you are using is the most recent. It should be version 4.3.

  Then the word "printer" will be grayed out in the top of the window until you have selected your printer and you press Next. To be able to use the drop-down list, you must be on the screen that shows "The difficulty of printing" / "Fix scan."

  Once on this screen, you should be able to use the drop-down list and choose "ink levels". This will display the information of ink on another screen for you.

  If you have found that up to now, and the ink level are not displayed, then there may be communication problems. Please let me know if this is the case.

  I have also two other ways for you to check out ink levels using the PSDR.

  This 'check ink levels' document will show you how to print a test page, which has information about ink and levels.

  You can also use the HP Solution Center.  If it is installed on your computer, you should be able to open it and click on your printer icon view ink levels.

  Please let me know if this was useful for you.

  Thanks for posting on the HP Forums.

• OfficeJet Pro 8000 - is no longer prints borderless print after upgrade - Tiger for the Mac Snow Leopard

  Mac OS X 10.6.8

  HP Officejet pro 8000 A809

  Wireless

  HP Photosmart Studio v. 9.7.4

  After upgrading from Tiger to Snow Leopard I lost the ability to print without MARGINS - until that time, that I had no problem.

  I use HP Photosmart Studio to print, but get the same error every time: "the selected printer supports the paperwork without borders. If you print, will serve the maximum printable area of the current paper size.

  I downloaded the most current driver after that I improved and I was able to print in general - when I try to select borderless printing it tells me that this printer does not support. I was able to print without margins using Creative Suite Indesign and printing of this app--but have lost the functionality of the HP Photosmart Studio is really a drag - since I have to do all sorts of adjustments to do workaround printing.

  Is it possible to upgrade Photosmart Studio? or re-start it? I'm lost and need help.

  Thank you

  If you always reminants of the HP software meant for 10.4, you must uninstall the software by using the "scrubber".  If you have already uninstalled, reinstall from the CD, then:

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall< scrubber="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Finally, download and install the "Full Featured" driver and software from the "Support & drivers" link at the top of this page.

• HP Officejet Pro 8000 printer - A809a. Drivers not installed

  I have a wonderful printer HP Officejet Pro 8000 - A809a used exclusively as a network printer and works PERFECTLY. Yet, I have errors reported about drivers not installed in device (Windows 7, 64 bit Ultimate) Manager.

  These are:

  1] adapter Multifunction (x 1)

  -Officejet Pro 8000 a809

  The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.

  To find a driver for this device, click Update driver.

  AFTER DRIVER SEARCH:

  Windows could not find a driver for your device

  Try to use the drivers of "OJP8000vA809_Basic_14.exe" has been a failure.

  2 other devices (x 1)

  Same as above.

  [3] printers (3 entries)

  -HP Officejet Pro 8000 A809 Series. (This is the only good entry)

  Properties:

  The device is functioning properly.

  -b. Officejet Pro 8000 A809.

  Properties:

  The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.

  To find a driver for this device, click Update driver.

  AFTER DRIVER SEARCH:

  Windows could not find a driver for your device

  Try to use the drivers of "OJP8000vA809_Basic_14.exe" has been a failure.

  -c. Officejet Pro 8000 A809.

  Properties:

  As above.

  Disabling or even uninstall these additional entries have no effect on the function of network printer.

  BUT they continue to be replaced after the reboot.

  This situation will affect the perfornce of the computer.

  Any suggestions, please?

  Advance thanks.

  Thanks for the great instructions.

  Now I'm showing only a single instance of the printer asking for drivers multifunction adapter in Device Manager. Therefore, I uninstall and long and shows no return once again.

  One thing FO, this printer is not actually a multifunction type.

  The system is currently NOT error display or ask drivers.

  I'm hopping it will stay like that.