Is a global functional with loops inside the structure of cases subject to the race condition?

Similar Questions

• How to use the TRUNC function with dates in the expression builder in OBIEE.

  Hello
  How to use the TRUNC function with dates in the expression builder in OBIEE.
  TRUNC (SYSDATE, 'MM') returns 1 July 2010"where sysdate is July 15, 2010 ' in SQL. I need to use the same in the expression builder in the logical layer mdb column.
  
  
  Thanks in advance

  Use it instead:
  TIMESTAMPADD (SQL_TSI_DAY, (DAYOFMONTH (CURRENT_DATE) *-1) + 1, CURRENT_DATE)

• Slow loop inside the quick loop

  It's my first week of work with LabView so perhaps the answer is very simple.

  Here's my question:

  How can I include a slow loop (event B) inside a quick loop (event A)?

  What I would like is for event B run every 1000 milliseconds, and the event has every 100 milliseconds.

  Where event is a position control loop and event B a simple write to a file of any measure.

  Any recommendations on how I should do this?

  You can use an Express VI of time spent inside the quick loop to see if it is time to perform the slow loop.  I took the liberty to not use a loop for your "event B" because it sounded like you want just the rhythm with the event.  Place B events in the real case of the box Structure. The design of producer/consumer model is the way to go if you are developing a complex application. This will make if your problem is relatively simple.

  

• Toshiba KIRA-102 with dust inside the screen

  Hello

  Big disapointement! It's my 4th Toshiba (first back in 1997... and still works!)
  My Satellite M30X with 10 years (ok) and my Tecra R840 with 3 years works 24 hours a day from the last August :-)

  The las one... a 102 Kira bought las November!
  Never had this problem: a task of dust about an inch or two the upper of the screen... but inside the screen!

  Now what?
  It's really annoying because it's the perfect... Toshiba advertising ultrabook!

  Paulo

  Hello

  To be honest, I never read on the problems of dust inside the display area.
  However, the mentioned absence looks like hardware related issue with material in question must be reported to the Toshiba authorized service provider in your country.

  In my opinion you should talk to the ASP guys on this problem of dust and probably they will replace the display panel

  On this page you will find all the Toshiba ASP available worldwide:
  http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/

• How to have a while loop inside a structure of matter?

  Hi all

  I would like to know how to control a while loop by using the structure of the case? I would like the person to check if the object has is in its original position or not.

  If this is the case, go...

  The object must then do its job, as mentioned in the while loop... as up and down 10blocks...

  Later, when she returns to its original position, the entire process must stop...

  I checked the forums on this http://forums.ni.com/t5/LabVIEW/How-to-stop-while-loops-inside-a-case-structure/m-p/591259

  It is the closest, I can have... but can someone tell me how to program for this? How logic should be?

  
  

• How to avoid the race condition critical in the event loop?

  I'm having a problem of race in the structures of the event.  I looked through various discussions of the forum and have not been able to track down a solution.

  In the attached vi (labView2015), if you type a new number for 'X', are not press entry, and hit then the "Go" button, then the old value of 'X' is used in the case of structure.  I deduce that it is a problem of race where after clicking on the 'Go' button has undertaken a task in the structrue event and also set up something in the queue to actually update the value of the variable.  Sounds good?

  This is the simplest example I could do for this problem that has emerged in vi a lot larger and more complex.  Any help is appreciated.

  With our thanks!  Devon

  MarcDub wrote:

  In fact, in addition to require a loop around the structure of your event, you must configure your events to the button GO to "Change the value" instead of "Mouse down".

  I should have mentioned, but I put my business in my excerpt to change value.

• Help with loops and the fi

  Hi, im quite new to action scripts but the use of pascal a lot. Im stuck with a loop. What I want to happen, is when it gets to a certain range, not stop there and do some things visible on the frame when I press the specific letters on my keyboard. I had:

  Stop();
  {if (Key.isDown (85))}
  Statements
  }

  but I found that it would apply only if I held the button when I walked into the frame.
  I did try using some different loops, but in vain
  any suggestions would help!
  Alex

  Try to use a listener...

  var keyListener:Object = new Object();
  Key.addListener (keyListener);

  function keyDownF() {}
  If (Key.GetCode () == 85) {}
  Statements

  }
  }

  keyListener.onKeyDown = keyDownF;

• Can't paint, "with brush" inside the selection after a STROKE.

  on an empty layer "layer 1", I've created an oval using selection tool elliptical that go to edit stroke. I caress with a black brush of 2 pixels. If I go back to the layer and ctrl-click, PS puts Mobile dotted around him that designate this option is selected. However, if I take a brush and try to paint inside I can't on the layer, "in or out of the selection", unless I have clear. Goes against everything I've learned so far on selections. Any help is appreciated.

  Try and get used to the use of many layers.  For example, the layers panel below shows that the top layer contains a Red Cross, but it is visible that where it overlaps the black circle because the layers are "clipped" together.

  

  To do this, place the cursor on the line between the layers and hold down the ALT (Opt) and click.  You will see the icon displayed below (I made larger than life for clarity) and the top layer will become indented with the tiny arrow facing downwards.

  

  You can also "clip" adjustment layers so that they affect only the layer that they are cut.  It is such a fundamental tool, there is an icon at the bottom of the Panel property of the adjustment layer (highlighted in red below.

  

  There are many ways of doing things with Photoshop.  For example, the same effect with the Red Cross and the black circle with the help of a layer mask.  CTRL click on the layer with this selection and black circle to load the selection in place, add an adjustment layer to the layer of the Red Cross.

  

  Perhaps the only thing more fundamental to the use of Photoshop that what precedes, control selections, but do not all learn in one day.

• pipeline function and type inside the package

  Hi all
  
  I'm sorry for the inconvenience, I tried to google my question before asking here...
  
  The question is:
  I can't compile type in the same package as my function in the pipeline?
  
  I have an example of a function in the package, everything works fine.
  

  CREATE OR REPLACE PACKAGE ZOO.pkg_cl_risk_eval  AS
  
  FUNCTION sample (p_date date, p_indicatorid number, p_ismodel number) return cl_risk_act pipelined;
  
  END;
  /
  
  CREATE OR REPLACE PACKAGE BODY pkg_cl_risk_eval is
  
  FUNCTION sample (p_date date, p_indicatorid number, p_ismodel number) return cl_risk_act pipelined IS
  v_obj cl_risk_type := cl_risk_type(NULL,NULL,NULL,NULL);
  BEGIN
  FOR e IN (
  select trunc(sysdate) as adate, 0 as cid, 0 as indicatorid, case when p_ismodel = 0 then 0 else 1 end as value from dual
                )
  LOOP
  v_obj.adate        := e.adate;
  v_obj.cid            := e.cid;
  v_obj.indicatorid := e.indicatorid;
  v_obj.value        := e.value;
  PIPE ROW (v_obj);
  END LOOP;
  RETURN;
  end;
  
  end;
  /

  SELECT using function statement:

  select * from table(zoo.pkg_cl_risk_eval.sample(date '2011-09-30',4, 0))

  I can't compile type in the same package as my function in the pipeline?
  Currently, it is outside the package:
  

  DROP TYPE cl_risk_type FORCE;
  CREATE OR REPLACE TYPE cl_risk_type AS OBJECT
  ( adate date,
    cid   number(10), 
    indicatorid number(5), 
    value number(5)
  )
  / 
  
  CREATE OR REPLACE TYPE cl_risk_act AS TABLE OF cl_risk_type
  / 

  As far as I can read from this source, it is impossible, but this information can be updated.
  http://asktom.Oracle.com/pls/Apex/f?p=100:11:0:P11_QUESTION_ID:4447489221109
  
  Oracle version: 11g
  
  UPD:
  I'm sorry, I'm not paying attention... It is possible as noted in the response to my similar question:
  function in pipeline work in the package? (Oracle 11g)
  
  Published by: marco on December 15, 2011 07:40

  As the following State messages, my post was wrong. I withdraw without reservation.

  Published by: APC on December 15, 2011 15:30

• [8i] help with function with parameters (for the calculation of the work)

  Let me start by saying, I've never written a function before, and I do not have access to create a feature in my database (that is, I can't test this feature). I am trying to achieve a function I can ask my IT Department to add for me. I hope that someone can take a look at what I wrote and tell me if this should work or not, and if it's the right way to go to solve my problem.
  
  I'm creating a function to make a very simple calculation of work (add/subtract a number of days to a date in the calendar).
  
  The database, I work with has a table with the schedule of work. Here is a sample table and sample data, representative of what is in my work table calendar:
  

  CREATE TABLE caln
  (     clndr_dt     DATE,
       shop_days     NUMBER(5)
       CONSTRAINT caln_pk PRIMARY KEY (clndr_dt)
  );
  
  INSERT INTO     caln
  VALUES (To_Date('01/01/1980','mm/dd/yyyy'),0);
  INSERT INTO     caln
  VALUES (To_Date('01/02/1980','mm/dd/yyyy'),1);
  INSERT INTO     caln
  VALUES (To_Date('01/03/1980','mm/dd/yyyy'),2);
  INSERT INTO     caln
  VALUES (To_Date('01/04/1980','mm/dd/yyyy'),3);
  INSERT INTO     caln
  VALUES (To_Date('01/05/1980','mm/dd/yyyy'),3);
  INSERT INTO     caln
  VALUES (To_Date('01/06/1980','mm/dd/yyyy'),3);
  INSERT INTO     caln
  VALUES (To_Date('01/07/1980','mm/dd/yyyy'),4);
  INSERT INTO     caln
  VALUES (To_Date('01/08/1980','mm/dd/yyyy'),5);
  INSERT INTO     caln
  VALUES (To_Date('01/09/1980','mm/dd/yyyy'),6);
  INSERT INTO     caln
  VALUES (To_Date('01/10/1980','mm/dd/yyyy'),7);
  INSERT INTO     caln
  VALUES (To_Date('01/11/1980','mm/dd/yyyy'),8);
  INSERT INTO     caln
  VALUES (To_Date('01/12/1980','mm/dd/yyyy'),8);
  INSERT INTO     caln
  VALUES (To_Date('01/13/1980','mm/dd/yyyy'),8);
  INSERT INTO     caln
  VALUES (To_Date('01/14/1980','mm/dd/yyyy'),9);

  The table includes since 01/01/1980 but 31/12/2015.
  
  I have written (and validated) this parameter query that performs the calculation of my working day (mday):

  SELECT     cal.clndr_dt
  FROM     CALN cal
  ,     (
       SELECT     cal.shop_days+:mdays     AS new_shop_days
       FROM     CALN cal
       WHERE     cal.clndr_dt     =:start_date
       ) a
  WHERE     cal.shop_days     = a.new_shop_days
  AND     ROWNUM          =1
  ORDER BY     cal.clndr_dt;

  Based on this request, I created the following function (and I have no idea if it works or if the syntax is right, etc..):

  CREATE OR REPLACE FUNCTION add_mdays 
       (start_date     IN DATE,
       mdays          IN NUMBER(5))
  RETURN     DATE 
  IS
       new_date DATE;
  BEGIN
  
       SELECT     cal.clndr_dt
       FROM     CALN cal
       ,     (
            SELECT     cal.shop_days+mdays     AS new_shop_days
            FROM     CALN cal
            WHERE     cal.clndr_dt     =start_date
            ) a
       WHERE     cal.shop_days     = a.new_shop_days
       AND     ROWNUM          =1
       ORDER BY     cal.clndr_dt;
  
       RETURN     new_date;
  
  END add_mdays;  //edit 9:31 AM - noticed I left off this bit

  I'm also not sure how to do to have the function handle results that would return a date outside the range of dates that appear in the table (prior to 01/01/1980 or after until 31/12/2015 - or, another way to look at what was, before the caln.clndr_dt or the caln.clndr_dt MAX value MIN value).
  
  My goal is to be able to use the function in a situation similar to the following:
  
  First of all, here is a sample table and data:

  CREATE TABLE orders
  (     ord_no          NUMBER(5),
       plan_start_dt     DATE,
       CONSTRAINT orders_pk PRIMARY KEY (ord_no)
  );
  
  INSERT INTO orders
  VALUES (1,To_Date('01/08/1980','mm/dd/yyyy'));
  INSERT INTO orders
  VALUES (2,To_Date('01/09/1980','mm/dd/yyyy'));
  INSERT INTO orders
  VALUES (3,To_Date('01/10/1980','mm/dd/yyyy'));

  And here's how I would use my function:

  SELECT     orders.ord_no
  ,     orders.plan_start_dt
  ,     add_mdays(orders.plan_start_dt, -3) AS prep_date
  FROM     orders

  Thus, the function would allow me to come back, for each command in my table of orders, the date is 3 days working (mdays) before the start of the plan of each order.
  
  I go about it the right way? I have to create a function to do this, or is there a way for me to integrate my request (which makes my mday calculation) in the example query above (eliminating the need to create a function)?
  
  Thank you very much in advance!
  
  Published by: user11033437 on February 2, 2010 08:55
  Fixed some typos in the last insert statements
  
  Published by: user11033437 on February 2, 2010 09:31 (fixed some syntax in the function)

  Hello

  Ah, referring to Oracle 8 and is not not able to test your own code makes me nostalgic for the good old days, when you have entered your cards and led to a window to the computer center and waited an hour for the work to be performed and then seen printing to find that you had made a typo.

  If you write functions, you should really test yourself. Like all codes, functions forge be written small not: write a line or two (or sometimes just a part of what would later become a single line), test, make sure it is running properly and repeat.
  Ideally, your employer must create a pattern of development in a development database that you can use.
  You can legally download your own instance of Oracle Express Edition free; just be careful not to use features that are not available in the database where the code will be deployed.

  You need a function to get the desired results:

  SELECT       o.ord_no
  ,       o.plan_start_dt
  ,       MIN (e.clndr_dt)     AS prep_date
  FROM       orders     o
  ,       caln          l
  ,       caln          e
  WHERE       l.clndr_dt     = o.plan_start_dt
  AND       e.shop_days     = l.shop_days - 3
  GROUP BY  o.ord_no
  ,            o.plan_start_dt
  ;
  

  It would be more effective (and somewhat simpler) If you've added a column (let's call it work_day) identified whether each line represents a work_day or not.
  For each value of shop_days, exactly 1 row will be considered as a working day.
  Then, the query may be something like:

  SELECT       o.ord_no
  ,       o.plan_start_dt
  ,       e.clndr_dt          AS prep_date
  FROM       orders     o
  ,       caln          l
  ,       caln          e
  WHERE       l.clndr_dt     = o.plan_start_dt
  AND       e.shop_days     = l.shop_days - 3
  AND       e.work_day     = 1
  ;
  

  You can use the analytic LAG function to populate the work_day column.

  A function would certainly be useful, although perhaps slower.

  The function you have posted has some errors:
  an argument can be stated under NUMBER (5); Just NUMBER.
  (b) when you SELECT in PL/SQL, as you do, you must SELECT a variable to store the results.
  (c) ROWNUM is arbitrary (making it useless in this problem) unless you draw a neat subquery. I don't think you can use ORDER BY in subqueries in Oracle 8. Use the ROW_NUMBER analytic function.
  (d) the service must end with an END statement.

  Given your current caln table, here's how I would write the function:

  CREATE OR REPLACE FUNCTION add_mdays
       ( start_date     IN           DATE          DEFAULT     SYSDATE,
         mdays          IN           NUMBER          DEFAULT     1
       )
  RETURN     DATE
  DETERMINISTIC
  IS
       --     add_mdays returns the DATE that is mdays working days
       --     after start_date.  (If mdays < 0, the DATE returned
       --     will be before start_date).
       --     Work days do not include Saturdays, Sundays or holidays
       --     as indicated in the caln table.
  
       new_date     DATE;          -- to be returned
  BEGIN
  
       SELECT     MIN (t.clndr_dt)
       INTO     new_date
       FROM     caln     f     -- f stands for "from"
       ,     caln     t     -- t stands for "to"
       WHERE     f.clndr_dt     = TRUNC (start_date)
       AND     t.shop_days     = f.shop_days + TRUNC (mdays)
       ;
  
       RETURN     new_date;
  END     add_mdays;
  /
  SHOW ERRORS
  

  Production code forge be robust (which includes "fool-proofing").
  Try to anticipate what people errors might appeal to your function and correct for them where possible.
  For example, if it only makes sense for start_date at midnight, mdays to be an integer, use TRUNC in the function where soembody passes a good value.
  Allow default arguments.
  Comment of your function. Put all comments within the service (i.e. after CREATION and before the END) so that they will remain in the data dictionary.
  If, given the same arguments, the function always returns the same value, mark it as DETERMINISTIC, for efficiency. This means that the system will remember the values transmitted rather than to call the function whenever it is said to.

  I wish I could score questions such as 'Correct' or 'useful '; you get 10 points for sure.
  You posted CREATE TABLE and INSERT statements (without even be begged).
  You gave a clear description of the problem, including the expected results.
  The code is well formatted and easy to read.
  All around, one of the more thoughtful and well written questions I've seen.
  Play well! Keep up the good work!

  Published by: Frank Kulash, February 2, 2010 13:10
  Added to my own version of the function.

• Video of the loop inside the instance to read .flv

  I have a clip that needs a loop within a clip in Flash. Could someone point out the code to paste in the ActionScript window? The .flv doesn't have any skin on it. I did what I can put the video file outside of the Flash animation.

  I found the script on the Flash forum. "flvPlayer" is the name of the INSTANCE that you give to the .flv.

  Import fl.video.VideoEvent;
  flvPlayer.addEventListener (VideoEvent.COMPLETE, videoFinished);
  function videoFinished(event:Event) {}
  flvPlayer.play ();
  };

• Accidentally slept with iPad inside the pillow

  Then my sister strives to hide me and kept iPad inside my pillow. I did not know that and I slept right on it all the time. I'm worried I had absorbed too much radiation my device while you sleep. The only thing on was wifi.

  If your router is far away there was not a lot of noise and the TX will be low

• How to run a while loop continuously without iterate loop inside the fi, a condition is met

  I enclose a VI that once the answer 28 comes the loop must stop and loop should continue an iteration. Can you show me a way for her

  You can stop the loop when a certain condition occurs: http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/add_cond_to_for_loop/

  Add a register to offset for the while loop and to implement the feature as below:

  

• ListView with TextField inside the component and requestFocus()

  Hello

  I'm trying to implement the logical: when the page with ListView is indicated - start editing (see the keyboard) in the field of specific text that is part of the agenda of the ListView.

  TextField.requestFocus () works very well if it is called some time later, after loading the page (assuming that when ListView load model and created the UI elements).

  How to identify when requestFocus() is success? onCreationCompleted for TextField/ListView does not work.

  It can be done with QTimer but I want to keep it as a backup plan.

  Thank you

  Can you try to add to your Page (or your ListView):
  attachedObjects:]
  {RenderFence}
  raised: true
  onReached: textFieldName.requestFocus)
  }
  ]

• vSphere client on a machine Windows 10 - problems with mouse inside the VM consoles

  Aloha,

  
  

  I just upgraded to Windows Pro 10. I'm also using vSphere client 5.5.0 build 1618071.

  When the management of the virtual machine, everything is good and right with the world. But when I access

  a vm console - either by tab or open a stand-alone console window the mouse

  becomes very irregular on the desktop of the virtual machine. Movement is unpredictable. Right click

  on an icon, sometimes opens the correct pop-up menu. And when I get

  the menu, choose the desired action is almost impossible.

  
  

  Everyone knows this and has a solution?

  
  

  Mahalo,

  Bill
  

  
  

  
  

  I found this... it worked for me.

  Problems of mouse with VMware Workstation 10 and point Windows 8.1 - vInfrastructure Blog