Inspiron-11 3147 touchpad does settle

Similar Questions

• (Redirected) INSPIRON N5050 - MY TOUCHPAD DOES NOT WORK, BUT IN SAFE MODE, IT WORKS PERFECTLY? HOW TO FIX THIS ONEEEEE... :

  ((J'AI BESOIN DE RÉSOUDRE CE PROBLÈME DÈS QUE POSIBLE SEULEMENT ÀLE SEIN DE CETTE SEMAINE.)) HELP ME PLEASEEE I HAVE A LOT OF PROJECTS TO DO... THE PROBLEM IS THAT WHEN I OPEN MY LAPTOP, MOUSE OR KEYBOARD FUNCTIONS BUT WHEN I PUT MY PASSWORD TO OPEN THE WINDOW AND JUST WAITED FOR ABOUT 5 MINUTES... THE TOUCHPAD STOPS WORKING.

  BUT WHEN I USED SAFE MODE, IT WORKS PERFECTLY...

  SUGGESTIONS PLEASEE

  Hi earlfeedsx,

  Please repost this in the laptop computer forum help.

  http://en.community.Dell.com/support-forums/laptop/f/3518

• Satellite L50-A013 - touchpad does not work

  Hi all

  I've had my L50-A013 Satellite for about 7 months now.

  In the last month or so I started to have problems with the touchpad, freezing and does not not my contact.
  This lasted a few minutes at a time, then came the back of its own accord, almost like a very long latency period.
  This morning, however, I turned on my laptop and the touchpad does not work.

  Device Manager does not display a mouse or pointing device at all until I attach a mouse USB.
  By pressing the key that normally activates / deactivates the touchpad does not work - nothing changes and the light does not turn on in both positions.

  I tried reinstalling the drivers without result, and windows is no update that might help (or any recently that might have caused the problem).

  If anyone has any other ideas for what I can try, it would be amazing.
  The laptop is under warranty so I can hopefully get it fixed, but if possible I would really do not have to go without a computer until it's settled.

  Thank you all for your time,
  -Sase

  Hi Sase

  It is not easy to say what the problem is, but I can imagine that there is hardware problem. Perhaps touchpad loses the connection to the motherboard. I mean if this piece of hardware is not detected I can imagine this scenario.

  Of course best test you can do now is to reinstall OS and test functionality with the factory settings, but will delete your actual configuration of OS and software pre-installed.

  If this kind of test is possible do. If not, I think you must contact the nearest Toshiba service provider and ask for help. They have special diagnostic tools and they can check it for you.

• Dell Inspiron 11 3147 battery "Do not load"

  This new Dell Inspiron 11 3147 just arrived today.

  The power adapter is "connected", but the battery is "not supported."

  I looked everywhere for help for this, the Dell Diagnostics found no problem and I've struggled to get a hold of customer service. The idea most commonly recommended is to uninstall and reinstall the driver ACPI Microsoft NER method exactly, what I did.

  The only thing I have not messed with is the battery itself, which does not seem to be accessible without damaging the back, which is screwed and secure well.

  No idea what is the problem?

  Update from my post below:

  A day later, after the battery fully charged and all was fine, I come back and it's back to the message "plugged in, not charging." I could see if flashing the bios and rebooting will work again.

  My original post on December 8, 2014:

  I had this problem until this morning. In short, I have updated the bios to Version A03, A03 (released December 2, 2014). Before that, I did all the googling and messing everything without success. Here's what to do:

  1. run "my Dell. You can access it by type Ctrl-Esc and then type in "My Dell" and clicking on the "My Dell" icon that appears.

  2. click on the Green Panel "Drivers and updates. This should open a window for product support browser.

  3. scroll down under article which said that "these drivers matching your selections" and click on the arrow next to "Bios".

  4. click on 'Download file '. Please close all applications and run the file and follow the prompts. It will restart for you at the end and the problem should be solved.

  Good luck!

  Ben

  Version A03, A03

• Inspiron 11 3147 cannot detect SSDS in AHCI mode.

  Hello.

  I bought the new Inspiron 11 3147 (2 in 1 model).  When "SATA Operation" is set to computer laptop AHCI cannot detect the SSD (Intel 530) in the Setup Windows 8.1.

  When I change "SATA Operation" to ATA Windows 8.1 can detect SSD in the installer without any problems.

  I think that it is the BIOS error. There will be an update? I can't use my SSD now :(

  Kind regards.

  Resolution is not to use the disks mentioned problems that Dell does not guarantee compatibility.

• Inspiron 11 3147 "plugged in, not charging".

  My Inspiron 11 3147 stopped charging. The adapter seems to work very well even if, after a hiccup when he says "adapter type cannot be determined.

  Steps I took to try to solve this problem:

  -Inspect the connections on the charger, they seem to be good.

  -Inspect the external area of the connection of the charger to the laptop, it seems fine.

  -Go into the BIOS and look for the adapter warnings. None.

  -Go into the BIOS and try all the settings of the charger. Nothing changes.

  -Remove the battery from the Device Manager. Reset. Nothing changes.

  -Uninstall the adapter from the Device Manager. Reset. Nothing changes.

  -Physically, remove and reinstall the battery itself. Nothing changes.

  In the BIOS, it is said that the adapter is 65 W and since there are no more errors on the adapter in addition to one that has popped up in Windows and did not return.

  I think it could be the battery that has just stopped in for a charge. Does anyone have advice?

  First thing to try: a new Dell OEM AC adapter.  If this does not fix it, replace the DC Jack:

  >

  And if that does not solve the problem, replace the motherboard.

• DELL Inspiron 11 3147 2-in-1 upgrades

  Nice day. I wanted to share my experience with the DELL Inspiron 11 3147 2 in 1 with Intel N3540. I bought the DELL decision-making. Receipt in very good condition. Slight marks pry where the bottom cover had been removed. I liked the form factor, the convertible function, the choice of the processor and suggested the battery life.

  I added,

  SAMSUNG SSD 850 EVO 250GB,

  Kingston HyperX 1600 MHz CL9 SODIMM 1.35v DDR3L Impact computer laptop memory HX316LS9IB/8 GB Black and

  Intel 7265NGW Dual Band Wireless-AC 7265 802.11ac, Dual Band, 2 x 2 Wi - Fi + Bluetooth 4.0.

  The tools,

  small Phillips screwdriver,

  nylon spudger levers, to promote the elimination of the lower pane l to facilitate the removal and installation of the 3 elements mentioned.

  Adapter USB 3.0 to 2.5 "SATA III hard drive cable w / UASP - SATA to USB 3.0 Converter for SSD/HDD - hard drive adapter cable

  or

  Case disk 2.5 "SATA 6 GB/brightness with USB cable

  Cloning software (Samsung included migration and optimization of the software). You can download from the Samsung website, or drive transfer included, you will need an external optical drive.

  Samsung software at this point 20/08/2015 can support Windows 10 who I had updated. The migration software would not recognize the Samsung SSD as I tried to clone the SSD drive. I called Samsung Customer Service and the other suggestion is that among the updates of Microsoft or DELL, can hide the USB connection. I used the recovery software to get back the Inspiron 11 3147 to original state of Windows 8.1, (no update) and the software of Samsung acknowledged the SSD. I installed the SSD and the recognized system. I am now in the process of updating Windows.

  I had installed memory, 8GB, and the system has recognized and acknowledged the 8GB.

  I had installed the WiFi card and the system has recognized and acknowledged the new card. The Intel 7265 is slightly wider than the original 1707 of DELL, which is a single channel card and he returned without modification.

  There are other options of brand for replaced parts.

  The main idea is to take your time, the background suppression is not complicated, the pry bar helps not to damage the case which is plastic. Parts of Austin, Texas people have a video on You Tube to remove the back to facilitate the removal and insertion of the HDD/SSD. The battery and the HARD drive screws must be removed to perform the Exchange.

  I will update with new information regarding the replaced elements.

  Hello

  I've updated the 3147 11 for Windows 8.1, all updates, you are prompted for on 21/08/2015. Windows 10 was not an option at the moment. I re-recorded through the icon of the window that appears on the notification at the bottom bar to the right. I added no additional software other than Bitdefender Free Anti Virus and CCleaner. I removed McAfee Livesafe, using the remove McAfee software before I cloned the Samsung SSD.

  Notes on hardware upgrades:

  SAMSUNG 850 EVO 250GB SSD; The Samsung magician software news. Used space shows 40GB (Windows 8.1) 191GB of free space. Total capacity in the new storage 232.89 GB drive. The SSD is set for maximum Performance. Performance tests show sequential read 283 MB/sec, sequential write 271 MB/s, 27292IOPS and 18419IOPS to write random shuffle.

  The Samsung SSD 850 EVO has the ability to preform better. The Dell system does not support a port SATA 6 GB/s (SATA3). The Samsung said that the SSD is connected to a SATA 3 GB/s (SATA2) port. I ran across this info on the net. Samsung software seems to be in accordance with that.

  At this point, I accepted the results. I don't game or running demanding software that read/write of the highest scores would be beneficial for me. The advantage of using an SSD vs HDD. The SSD has no moving parts that I have to worry that I hold or move the 3147 11. The beginning, opening closing of the application software/is faster than the 5400 RPM HARD disk provided with the 3147 11.

  The memory of 8 GB of Kingston: The Microsoft System info shows GB 8.00 (7.89 GB usable).

  The Intel Dual Band wireless AC 7265: I have not used any test method to determine the actual changes compared to the Reference Dell 1707. It connects and maintains the connection. I use TWC combo phone/TV/internet by modem. The 7260 Intel and wifi 7265 cards were and are used in other DELL products.

  3147 11 Device Manager shows all connections, no problems. I mentioned that when I had updated for Windows 10 with the HDD, I see a problem a device not connected and no driver available. I will look when 10 Windows is installed.

  Terry, thanks for your question.

• Mouse/Touchpad does not work

  I have a hp 2000-bf69wm, 8 64-bit windows.

  The touchpad does not work and is not a mouse cursor. Any suggestions?

  You could try a Hard Reset.

  Forced to Power Reset - "Hard Reset".

  • Perform the Hard Reset .  Start the computer and connect

  Hard Reset is a reset of the driver; This isn't Windows 8 resetting that installs the operating system.  The procedure to hard reset does not erase your files or it destroys your Windows installation somehow.

  Why a power reset works to solve some problems:

  Hard Reset erases the pilot instructions that generally persist to boot-to-boot.  The Hard Reset is a way to force the computer to read the instructions of drivers and software stored in the operating system.  The compensation action and forcing a new reading on the disk and software drivers can solve some problems.

  Sign in and check...

  =====================================================================================

  Find, open, and read the following file named: difficulty TouchPad / ClickPad

• Satellite X 200-219 - the touchpad does not work as it should

  Hi all

  I recently bought a 2nd hand Toshiba Satellite x 200-219. Had some problems with it that I have overcome now, except one... The touchpad does not work as it should. I think that the cable has been damaged at some point.

  So I'm wondering if I should use the same ribbon cable to connect the keyboard to the motherboard or can I get one of a different model of PC Toshiba laptop?

  I tried searching on the net for advice but have resulted in nothing so thought I would try the forums.

  Any help you can give will be greatly appreciated.

  Thanks in advance,

  Lee

  I think you can use the items to the satellite X 205 series since this seems to be the same series as X 200:
  Found some related parts the touchpad:
  Satellite X 205 / X 200 touchpad Board with cable: reference number: K000047950
  Satellite part number for the TOUCH PAD FFC X 205 / X 200: K000047980

  But why you n t come into contact with a Toshiba authorized service provider in your country and order the part necessary and compatible?

• Satellite S50T-B950 - touchpad does not work after update of Windows 10

  Hello "Toshiba."

  After the update for Windows 10 I have a problem with the touchpad does not work and became come boiling Forum and found that the solution is to uninstall "MOMENTUM Input Device" to "Device Manager", finally worked the touchpad, but alas multi touch properties such as: "zoom/minimize gestures of scrolling and two-finger" no longer work

  Please help me solve this company of Toshiba problem

  The same theme has been already discussed and resolved in this thread:
  https://Forum.Toshiba.EU/showthread.php?83885

  Then please follow the proceedings in the other thread to avoid misunderstandings

  by the way: here is the link to pilot site Toshiba win 10:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

• Qosmio X 300 - 11W - TouchPad does not work in mode 'sleep'

  TouchPad does not work in mode 'sleep'. I can't wake up my computer using a touchpad. I downloaded and installed a driver for Windows 7 32 bit from a page of the Synaptics driver, but it did not help.

  Can you wake up your Qosmio using the power button / stop?
  You close the lid when the laptop enters the sliding mode?
  After you open the laptop lid should wake up. It work correctly?

• Satellite A0302 C50D and Ubuntu 12.04.4 - touchpad does not work so well

  I have a Satellite C50D-A0302, PSCGWF part number.
  I use Ubuntu 12.04.4 LTS Pangolin specific to this topic, but the touchpad does not work so well.

  How can I get the right drivers for the touchpad?

  How do I know if the touchpad is Synaptics or ALPS, so I can get the correct drivers?

  Thank you!

  As you probably know Toshiba does not support Linux and does not offer Linux drivers.
  All about you Googling can find many Linux forums. Try to find useful information here. I mean you can exchange your experiences with other people who are fans of Linux and experts, so I assume that you can get help here.

• Satellite U940-103 with Linux - Touchpad does not & poorly programmed FN keys

  Hello

  I bought a toshiba Satellite U940-103, and I installed ubuntu 13,10 dual boot with windows 8.1.

  The problem is that the touchpad is not working and the fn are false (fn f2 key suspend the computer instead of the brightness control).

  I tried to install linux different sistem (Mint cinnamon 15, 13.04 ubuntu, ubuntu 12.04.3) but they still have the same problem, even in the live cd.

  I tried to ask the Italian Forum of ubuntu, but they have solutions do not work...

  Thanks for the help
  Yun

  * PS.* sorry for my bad English. Is it normal that my laptop seems overheated and my battery life seems to be reduced when I use Linux?

  Hello

  Yes, you're right!
  In the direct (stable mode without having to install), the touchpad does not work.

  However, once installed, it will work.

  In regards to shortcut keys, yes they are mapped correctly.
  They are treated to the old-fashioned way (former Toshiba models had the mapping used by Linux on this model).
  If you want help, file a bug report on bugs to Ubuntu system.

  You can always change the brightness by using the GUI (Control Panel > brightness & Lock).

  Fun with Ubuntu on your device!

  Tom BR

• Satellite PRO A200-1 s 1 with Windows 7 x 32. Touchpad does not work

  Hello world
  I installed Windows 7 on my Satellite Pro A200-1 s 1, recovered all the drivers on the Toshiba site, everything works fine (less than the webcam that doesn't work even with the previous s.o. XP or Vista...). But my Touchpad does not work... No Fn + F9, no drivers, nothing works. And in my control, Manager of Panel devices seem to be going well.
  Any suggestion?

  Hello

  You reinstall the driver for the touchpad?
  Check it!

  Also check if the option disable touchpad when USB mouse is connected is not checked. That are in the control panel-> mouse-> device settings

• HP Pavilion TouchPad does not?

  Hello, I have the HP Pavilion dm4 2015-dx and this morning when I started my computer the touchpad does not work. I use a mouse and it works fine however. I tried the download Synaptics and followed the instructions but it didn't work. Help!

  Mastiucha,

  Take a look at this document - file mentions the methods used to enable / disable the TouchPad.

  You could jump repeat the reset method.

  Enable / disable the TouchPad

  Click on the star of congratulations !

  It's a big 'thanks' for the author's efforts.