Inspiron 530 'bus SM' and the necessary USB controller drivers...

Similar Questions

• SM Bus controller and 2 missing USB controller drivers

  Hello and thanks for reading, I recently reformatted my laptop HP Pavilion dv7-6113 cl with windows 7, which is it came with, I just a new set.

  But after getting all the software I wanted and pilots back on this subject that I noticed that two of my USB ports are not working, and two others say they don't 3.0 which I may be wrong, but I'm sure they are.  I've looked everywhere, people say USB drivers are delivered with Chipset AMD drivers, any other with the same problem but different HP laptop has posted on this forum and others that drivers AMD fixed his problem, but he has not worked for me, here the source:

  "For some reason, HP does not only provide the driver of portable computers for all its AMD based AMD chipset on any page of support and driver."

   

  You must install the amd chipset driver from the link below, the first file listed. Who will install the drivers for SM Bus and USB 3.0.

   

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2 ".

  However when I click the link need me somewhere else where AMD wants me to fill my specs pc or automatic detection. that gives me drivers, but does not solve my problem of USB.  He also says: "your system does not support these drivers.

  That's what my said Dev Manager has no drivers.

  SM Bus controller

  (USB) Universal Serial Bus controller

  (USB) Universal Serial Bus controller

  

  In "Information systems" in the topic "Peripheral issue" here is what is stated.

  SM Bus controller

  PCI\VEN_1022 & DEV_780B & SUBSYS_3591103C & REV_13\3 & 2411E6FE & 2 & A0

  The drivers for this device are not installed.

  Universal Serial Bus (USB) ControllerPCI\VEN_1022 & DEV_7812 & SUBSYS_3591103C & REV_03\3 & 2411E6FE & 2 & 80

  The drivers for this device are not installed.

  (USB) Universal Serial Bus controller

  PCI\VEN_1022 & DEV_7812 & SUBSYS_3591103C & REV_03\3 & 2411E6FE & 2 & 81

  The drivers for this device are not installed.

  Here is my system info

  Name of the operating system Microsoft Windows 7 Home Premium

  Version 6.1.7601 Service Pack 1 Build 7601

  Another Description of the OS is not available

  Manufacturer of operating system Microsoft Corporation

  System name ANONYMOUS-PC

  System manufacturer Hewlett-Packard

  System model HP Pavilion dv7 Notebook PC

  System Type x 64-based PC

  Processor AMD A6 - 3400M APU with 4 logical processors, 4 Lossnay, 1400 Mhz, graphics HD Radeon (TM)

  Hewlett-Packard Version / Date BIOS F.21, 13/09/2011

  SMBIOS Version 2.7

  Windows directory C:\Windows

  System directory C:\Windows\system32

  Boot Device \Device\HarddiskVolume1

  The local United States

  Hardware Abstraction Layer Version = "6.1.7601.17514".

  Physical memory (RAM) installed 8.00 GB

  7,48 GB total physical memory

  5.34 GB available physical memory

  15.0 GB total virtual memory

  12.4 GB available virtual memory

  Page file space 7.48 GB

  Paging file C:\pagefile.sys

  HP Pavilion dv7 - 6113cl Entertainment Notebook PC
  Serial number: 5CH1350U9U
  Product number: QE360UA

  All suggestions greatly appreciated.

  Thank you

  The specifications of your HP Pavilion laptop dv7-6113 cl Entertainment, clearly indicate that this model has 2 x USB 3.0 SuperSpeed in most 2 ports-port Universal Serial Bus (USB) 2.0. Please try the AMD Chipset Drivers (Chipset, USB 3.0, SATA/RAID). or looking for HP SP61462.exe

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• ScanJet 5590 HP (L1910C): computer doesn't have the support of the necessary usb software

  OM my new G3 400 ProDesk of HP I have this error message during the installation of the software ScanJet HP5590 - "this computer doesn't have the support of the necessary usb software" - drivers are installed properly i. e. I can scan through a third patry - for example - FastStone software, but I can't use scan buttins anyway. Any ideas?

  Hello
  Click the Start button and type folder in the search bar, then open the Temp folder indicated.

  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.

  Now follow the installation and check for the difference.

  Kind regards
  Shlomi

• Desktop Dell Inspiron 530, Verizon Mifi and not found Internet network

  I have a Dell Inspiron 530 desktop computer and I have a wireless mifi Verizon for Internet access point.  I thought that my office had a wireless card but I can not find it the network of the mifi. MiFi work because my phone can get it. What should I do to get my office to pick it up if it's still possible?

  Thank you, following these steps I found that my office does not have a wireless card. So I guess I'll do something different for the Internet. Thanks again!

• evo n610c windows 2000 usb controller drivers

  Why the files on the website do not work? Support for USB on Windows 2000 contrroller seems to have disappeared. Is there a problem? My computer came with Windows 2000 but I have lost the discs. Is there some weird licensing issue?

  I have it. Network drivers for Windows 2000 are in sp22996, it is simply a process of 2 steps (need Windows search for drivers in the extracted directory). And the USB controller for my evo n610c is NEC non Intel and not provided in the file of MS in chipset. Instead, Windows Update for Windows 2000 will find the drivers for the NEC USB controller.

• HP DV2054EA bus audio and the audio driver

  Hello

  I have a compaq DV2054EA sn - pn 2CE6320SKV - RD664EA #ABU XP Service Pack 3

  I had to adapt to a new motherboard as either an overheated sizzeld and flashed blue lights out via usb on the left side

  so everything is high and works well outside the 2 things

  1 blue led quickplay lights up and the keys do not work with volume up/down

  2. I had no volume

  I now have the volume but the icon in my taskbar when shown as in mute and audio properties will not actually cut

  the sound is always available when I cut it

  so I uninstalled the audio bus and drivers conexant

  reinstalled the audio bus then restarted and get the (properly configured device code 1) then tried windows update to see if that helps anything at all the

  went to the site and downloaded another same audio bus

  When I install always the same from conexant hd audio driver

  ideas please remember that the quickplay buttons do not work, I ordered a new Ribbon to switch cover tape as mine looks rough and not slot in easily

  Thank you very much

  Maggie

  Hello

  This is a link to the UAA BUS DRIVER I found that would work on my laptop dv2054ea

  This must be installed before you install the audio driver conexant

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=96237&swItem=ob-45958-1&mode=4&IDX=0

  and here is the link for the driver Audio I installed which treats the headphones not speakers onboard inhibition

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-46062-1&LC=en&cc=us&DLC=en&product=1817074&OS=228 & lang = en

  maggieglanville wrote:

  Hello

  The audio was also a very big problem to solve

  After installing the bus driver uaa audio driver kept being refused sayiing does not support

  It tooks several attempts to find the right audio driver to go with uaa bus driver

  all those on my recovery partition would not move correctly nor do any on the site of hp

  When you type in my model or even by looking at my laptop for auto detection of drivers for me

  Also, I found to my dismay that until I found the correct uaa and audio drivers headphones are not

  start-up mute the speakers on Board (this seems to be a major problem for people more)

  in any case

  the only other annoying problem that I will now consider is how my tattoo system now

  Since none of my recovery disks that I created with success are compatible with my pc/laptop

  Why, oh why your laptop allows you to produce recovery disks, then tell you they are successful

  then say you when you test them that they are not compatible

  I tried 3 different types of discs double layer min - dvd and plus-dvd

  so I guess I need to explore the tattoo

  If someone has already done this, please do not hesitate to advise

  I will now start to google

  Thank you for taking the time to read this

  Here is a link to the Hp site explaining how tattoo

  http://go2techonline.com/documents/Tattoo_DMI_Utility_Instructions_v5.PDF

  Thank you very much

  Maggie

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-46062-1&LC=en&cc=us&DLC=en&product=1817074&OS=228 & lang = en

• (Redirected) Computer laptop Inspiron 5720 does not and several necessary to restart reboots

  When I try to restart, Hibernate or shutdown my laptop, the screen goes black but the rest of lit power button and the fan still works.  I have it turned off manually, but from the start, the hard drive, the light flashes briefly but then nothing no past (black screen) but the power button stays on.  Then after completing the power on/off button many (3 - 15 times) it starts normally.  I reloaded the operating system (Windows 10) with the help of Microsoft support without effect.  The apparently random number of reboots necessary for the start-up of the machine is very confusing.    I didn't want to erase my hard drive to solve this problem, if there is a more likely cause.

  Hi BRBill,

  Please repost this in the forum software and operating system, Windows 10 thread for help.

  http://en.community.Dell.com/support-forums/software-OS/f/4997

• Presario R3000 (R3200?) and the wireless USB mouse

  I have a Presario R3000 (or, perhaps, R3200) bought at Office Depot ages ago...

  Also, for centuries, I used a mouse Microsoft usb/wireless.  This mouse is connected through a hub USB of TrendNet.

  Suddenly, a few days ago the mouse is not responding.

  I tried to uninstall/reinstall the drivers, peripheral and even tried a BIOS flash, nothing helps.

  Here's what's weird:

  (1) a WIRED USB mouse will work, without any problem, in the same usb ports that the Wireless does NOT work in (I try all 3 ports of the laptop and those on the hub, in all of this).

  (2) the mouse (and the replacement, I bought, thinking that my mouse is dead) appear correctly in Device Manager - they just do not respond to the movement.

  What is a USB problem?  A power USB problem?  A Windows XP (pro, R2) problem?  A motherboard problem?

  I have no idea where to continue troubleshooting...

  Thank you

  EM

  It may be a stupid question but... you did not put fresh batteries in the mouse, have you tried new batteries?

• Install the satellite L35-S2161 - OS and the necessary drivers

  I'll replace it the hard drive in my Satellite L35-S2161 next week. (I tried this a couple of weeks, but I couldn't get the wireless or PowerSaver utility to work so I put the hard drive and everthing back in original works)

  So what drivers should be installed and in what order. In addition, there is no package Toshiba added value listed in the site Web of Toshiba for my L35 with Windows XP. So is that what I need Toshiba value added package (PVAT), if so where can I find it? I opened my Toshiba restore disk and the folder COMPS1 contains all drivers and utilities that I need. But there is no Toshiba value added package (PVAT).

  The only thing I can find in the restore disc is a folder named 'Utilities Toshiba 1' and Notepad in this folder say "+ this package is for the Toshiba Utilities. It includes energy saving, which can help you customize the settings of hardware + your computer and hardware configuration features. ', it's the Toshiba value added package?

  Yes, I can use the restore disc, but I would use my retail XP Pro instead. So, if anyone can help with the * correct driver / utility install command *, it will be greatly appreciated

  Thanks for any help you can provide.

  Hello

  As I m don't me wrong, Satellite L35-S2161 belongs to the Toshiba US series. All drivers must be placed on the page of the Toshiba driver we.

  The package of value added is not created and designed for Win XP. It s only for Vista and Win 7!
  Using Win XP you must install the Toshiba Power Saver Utility for Windows XP (v7.03.07Q, 25/08/2006; 6 M) in order to obtain current installed saver.

  Regarding the WiFi network:
  In my opinion you have not installed the right driver.
  There are two possible different WLan cards; WLan or Intel, you will need to install the WLan driver which is compatible with the wireless network card.

• USB controller drivers and controller for HP Envy 17 SMBus

  Dear all,
  
  I have big challenge trying to locate and install the drivers for the USB controller and SM Bus for my HP Envy 17 controller.
  Recently they start causing problems and the message in the properties device manager says that the drivers are not installed, I am on Windows 7 Ultimate (64).
  
  Thanks in advance.

  Dusan

  You are the very welcome.

  First install the smbus controller driver and restart.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-89304-1&cc=us&DLC=en&LC=en&OS=4063&product=5093438&sw_lang=

  Then install the driver of the usb3.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-94241-1&cc=us&DLC=en&LC=en&OS=4063&product=5093438&sw_lang=

• SP A10 and USB controller drivers

  I have a satellite pro A10 and cannot find the driver for the USB controller that is no longer available in toshiba online downloads. How can I get the driver that is not provided in the driver CD?

  Hello

  "normally you don't need a USB driver. The USB driver is part of XP and is installed by it! If it does not, you can uninstall the USB port in the Device Manager and the operating system reinstall the next time you start upward!

  Good bye

• EliteBook 725 G3: Failed to update the Firmware USB controller of Type C

  My laptop is one of the first to come out of the Assembly line and came with firmware 1.02.

  1.08 BIOS that is out there, so I tried to update Windows 7.  It took time, but it's over and the tool said to restart.  That's all he said I remember.

  Upon restart, it started giving beep codes.  I don't remember who it was, but it was something like 1 long 2 short or long 2 2 - short.  He kept with him for awhile and I got sick of him, so I pushed on and held the power button for the kill and then restarted.

  This time, he got in the BIOS, who says she has been updated controller firmware USB Type C of v12 v13.  This FAILURE and gave me the option "restart and try again."  I took that, but he was never retried.

  I felt comfortable with that, so I flashed the BIOS 1.08 again, this time in the BIOS using a Flash DRIVE (\Hewlett-Packard\BIOS\New\N73_0108.bin).  He went through much faster than on Windows, and in the end, he actually warned me that the machine may beep for awhile after restarting.  Uh, thanks for the warning, now it's too late.  Why doesn't Windows Update program gave me the same caveat useful?

  In any case, the SystemRoot machine, but he did nothing to try to update the firmware of the controller USB Type-C.  I'm guessing that he defined an indicator saying somewhere that we are already at 1.08, so there is nothing new to do.

  When the BIOS Setup is emptied using BiosConfigUtility.exe, it shows the USB Type-C controller firmware to be even 00.12.

  So, how to update at 00.13?

  Posted March 31, 2016 1.11 BIOS update corrects this problem.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7815285&swItemId=ob_163435_1&swEnvOid=4192#TAB4

• VMWare Fusion 7 and still no USB 3 drivers...

  I'm a little disappointed that even after upgrading from 6 to 7 that I get always no VMWare USB 3.0 native support is Windows 7...

  I don't know if they have it works for Windows 8.1 but certainly, it does not work for my main Windows 7 VM.

  The case is really technical over an entire year, it would not be implemented in 7? Help me understand.

  Disappointed...

  P.S. If anyone has found a solution, please you intrigue me.

  kungfuu72 wrote: help me understand.

  This topic has already been covered ad nauseam!

  The bottom line is Windows 7 not delivered with the native USB 3 support for skins, and Microsoft has not provided any service pack or upgrade to Windows 7 to other native USB 3 support.  Therefore, it is a matter of Microsoft not a matter of VMware!    VMware choose that support the native functionality of the OS and Windows 8/8.1 provides the native USB 3 support of skins and as such VMware support USB 3 in Windows 8/8.1.

• HP Pavilion Notebook 15-e078sa: could not load the Driver USB controller

  Hi, I'm unable to find the driver for my USB controller, can anyone help?

  Hello

  Install:

  https://downloadmirror.Intel.com/21129/Eng/Intel (R) _USB_3.0_eXtensible_Host_Controller_Driver.zip

• I need USB Controller drivers for my HP Pavilion g6 2235ca computer laptop running Windows 7 Pro 64 bit?

  Thus, it was at least a couple of months that I use my laptop with a single working USB port.

  The other two do NOT work. If I go to the computer in the start menu, make a right click on computer, and then click Manage, then I go to the Device Manager, there is a yellow exclamation next to the (USB) Universal Serial Bus controller.

  When I try to update, Windows 7 tells me that an update is not found blah blah blah...

  This problem has happened since I installed Windows 7 64-bit on 64-bit Windows 8.

  So, can anyone help me find the drivers for the USB controller? Or is it some sort of hardware failure or problem?

  Help, please? Any who...!

  Thank you!

  Hello

  Try to install the driver USB 3.0 on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp55501-56000/sp55975.exe

  Kind regards

  DP - K