Inspiron 531 s graphic problems

Similar Questions

• A Dell Inspiron 531 computer will be compatible with Windows 7? Conflicting information between sources.

  I looked on these contradictory information, and here's what I found... I'm still not sure about that.
  I found information about this Dell Inspiron 531 computergoing to be compatible with Windows 7 on the site of Microsoft and in the control panel of that computer system information.
   
  But then I found more information on the Dell website that indicates otherwise.
   
  Please follow me closely here, it took some time to compile this info.
   
  Allows first eliminate what would be the simplest solution I already tried, that would be the "Windows 7 Upgrade Advisor" located at this address: http://Windows.Microsoft.com/UpgradeAdvisor
   
  On this Web page, there is a small program to download and install that is supposed to tell me if this computer is compatible with Windows 7 in processor speed, RAM, graphics card, etc. and devices, automatically... Unfortunately, it does not work... I installed it and it stopped with the message: "Windows 7 advisor stopped working" so that program and this option is unnecessary.
   
  So to see the Web page at this address:http://windows.microsoft.com/en-US/windows7/products/system-requirements 
   
  It is the "Windows 7 system requirements" list of information... it shows that I need at least a 1 GHZ processor or faster, 32-bit... This Inspiron 531 has a 2 GHZ processor and is 32-bit. This page is says I need 1 GB of RAM... it has 1 GB of RAM. It says I need 16 GB of available disk space, it has a C 138 GB primary hard drive which will be deleted when Windows 7 is ready to be installed. And he said that I need a"Graphics card DirectX 9 (with WDDM1.0 or higher driver)" ... the last part in parentheses is the only part that I'm not sure, but my system via the control panel information shows most of this information as being adequate.
   
  Go to this URL: http://support.dell.com/support/edocs/systems/inspd531/en/OM/appendix.htm#wp1149549 to see the Dell Inspiron 531 annex page online and click on the link above titled, 'Specifications' or just scroll to see... there in the category 4th down titled 'Video', it shows the "video integrated Nvidia (DirectX 9.0 Shader Model 3.9 Graphics Processing Unit) '. This seems to correspond to the above listed"DirectX 9" info page "Windows 7 system requirements".
     
  But then there are 2 pages Web of Dell, which indicate that this Dell Inspiron 531 is only supported by Windows Vista and Windows XP... see this URL for this Web page... http://support.dell.com/support/topics/global.aspx/support/osmatrix/index?c=us&cs=19&l=en&s=dhs& ~ ck = mn  
   
  This is another contradictory Dell Web page at the URL:http://support.dell.com/support/topics/global.aspx/support/dsn/en/document?c=us&l=en&s=dhs&docid=360683&journalid=910DD2FE57EB5496E040AC0A64E9331A#Issue0_1
   
  It shows, once you scroll down just a bit, a list of the current Dell computers that can support Windows 7... the Inspiron 531 is not on this list.
  This list excludes the Inspiron 531, but it then says' does not have a computer on these lists? Click here to shop for a new Dell! » .. .bad grammar side, this line that I'm pointing out may just be trying to sell me a new Dell computer, if I actually need or not Dell
  !
   
  And finally my info the computer from the control panel shows aprocessor 2 GHZ, 1 GB of RAM or 958 MB anyway and the 32 bit OS.
   
  And Yes, I ran the built-in diagnostic test Dell PSA on this computer and when it tests the sound card and the speakers, he plays the song a bit in each channel and then on both channels, so I know that the material is good on this computer.
  I know it's a lot to go through... it took me a while to compile this info, and I sent a version of this letter with screenshots and other MS Tech in India who I worked with for a month on the phone and email to correct a problem of 'no sound' that simply cannot be beat.
  But I'm trying to make sure before I do a clean install of Windows 7, when the disc arrives here, I don't clean it hard drive alone to experience Windows 7 does not work on this machine.
  Actually, I'm a Mac user and I don't have much trouble in those... Just trying to fix the computer of my mother for it, and now it seems that trying to install Windows 7 is the only way to get the sound back so that my mom can enjoy some music again.
  I never thought that I would like to know as well on the PC troubleshooting I've learned in the last month, but I don't like, and there is still no sound on this computer and everything has been tried... I made a collage of a hundred different error messages from Windows that I think I'll put it up for bid on ebay... I just want to go home to my trusty Macs.
   
  Please give me your comments... I would of course welcome.
  Thank you
  NuMetro

  I am happy that you have it installed, but you have sound?

  I was too surprised when Windows 7 to install all my drivers in device for me!

  The video driver that it wanted to install was even later that of Nvidia. Also, it does not have the driver Physx I needed, so I had to install one myself. The other driver, that he has not installed was the pilot for the X - Fi card. He did install my motherboard if chipset drivers, but I turned around and installed ones that came with my motherboard.

  Windows 7 does a better job to settle on earlier versions of Windows, but do not watch install what he wants to make sure that it does not have something that you don't want. He came along and updated my video driver again, but when that happens, it installs just the driver itself and not the driver Physx and my video control panel. Now when he talks about video drivers, I just go to Nvidia and download the full set.

  You have the option in there for Windows Update to select which updates you want to allow. I would have put to allow you to decide which ones you want and do not let do it on his own.

  I'm glad you're a happy camper! I do not see where you come with Vista, I jumped on this operating system completely because of the horror stories I've heard.

• Cannot find or download video drivers for Inspiron 531

  Hi guys

  System:

  • Inspiron 531
  • AMD Athlon Dual Core 6000 + 3.01 GHz
  • Windows Vista 32-bit SP2
  • NVIDIA GeForce 6150SE nForce 430

  Earlier, the display on two monitors connected to my Inspiron (Dell 24 "& Dell 22") deleted and enter Power Saving mode.

  Both screens are also connected to my XPS 8300 and they work very well with this system. I also checked the two cables and they work too.

  The monitors are usually connected to my Inspiron like this:

  • The 24 "monitor is connected to my Inspiron with a DVI - D to DVI - D cable
  • The 22 "monitor is connected through a DVI - D to VGA cable (the slot of DVI - D on the PC to the monitor VGA slot)

  However, if I run live of the Inspiron, its connected monitor VGA slot to works fine.

  The display shows a screen of information who advised me to click OK to complete the installation of the "new" NVIDIA software I have automatic updates turned off and I certainly did not begin any procedure update.

  Anyway, I clicked 'OK' and reconnected the monitors as normal to think everything would be ok, but they still do not work.

  I had a problem not long after I got this PC when I updated the video drivers from NVIDIA direct - I could run basically only to screen at resolution 800 x 600. I contacted the Support technique Dell and they said, it would be best to always get the updates driver directly from Dell. I did this and the problem was solved.

  I tried to find the relevant video drivers on the Dell site, but for some reason any my Inspiron no longer appears on my record details, only my most recent XPS. I tried to re - register, but I keep saying that my Service tag is no longer supported. I found anywhere else on this site where I can download the appropriate drivers.

  So I'm stuck - ideally I want to download the drivers for my dual monitor Setup works as it was before. I tried to do a system restore, but I don't know if it will work. In fact, I cling to the wide trying anything in case I find myself accidentally disabling VGA, power supply, so I won't be able to do anything with my system.

  Why Dell make life so difficult for someone who has purchased a product from them once his warrany has expired?

  Thanks for any help.

  What happens if you start in Mode safe?  -Restart, and then press F8 before Windows starts to load and choose Safe Mode from the menu.

  Assume correctly that it is an add-in PCI-e graphics card? A map is not... ??

  You can try this:

  1. Power off, unplug
  2. Press / hold the power button for about 15 sec.
  3. Carefully reinstall the video card in its niche.
  4. Then remove the battery from motherboard and the power button press / hold again to ~ 30 sec
  5. Reinstall the battery (right-side-to the top) and see if it works now

  NOTE: It may be a good idea to open BIOS setup (reboot and press F2) before trying the above. Copy down all the settings of the BIOS because the battery will reset the BIOS default settings. After reinstalling the battery, restart and press F2 and confirm that the settings match what you noted. Be sure to save changes before exiting the Setup program.

• Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.

  Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.  Maintains documents in the print queue and print them when the computer is restarted.  In addition, the computer does not recognize my Promaster digital converter when I plug it into a port.

  Hello

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.

  Please answer the following questions that would help us provide a better solution.

  What version of Windows are you using?

  Try to follow the steps and check:

  Step 1:

  Visit the link following if you are using Windows 7.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  If you are using Windows Vista, see the steps mentioned in the link.

  http://Windows.Microsoft.com/is-is/Windows-Vista/troubleshoot-printer-problems

  Try the steps from the link following if you are using Windows XP.

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  Step 2:

  Try to activate the devices associated with the Dell printer and disable the rest by performing the clean boot, once done try to print.

  You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. The following article explains how to solve problems in Windows Vista or Windows 7 by performing a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Put the normal computer as mentioned in step 7 of section.

  Step 3:

  About the issue with Promaster digital converter try to connect to another USB device or run the fixit and check:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Please feel free to respond if you have any other questions, we would be happy to help.

• Reference Dell inspiron 531 vista equipped s won't start

  Dell inspiron 531 s fefuses Vista running at startup. Monitor shows nothing. Once I deleted pwer offers completely for about 20 minutes, it starts then as usual. This has happened for 2 weeks now

  Hello

  1 when was the last time it was working fine?

  2. don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Method 1: Try the steps from the link below.

   

  Troubleshoot monitor and video card:

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  Note: Also, check with your diet.

  Hope this information is useful.

• THE CALICO CAT WINDOWS DESKTOP BACKROUND WILL BE WORK ON A VISTA ULTIMATE 32-BIT WINDOWS AND ANY SERVICE PACKS DELL INSPIRON 531?

  I have a Dell Inspiron 531 in the House. It's Windows Vista Ultimate 32 bit without service pack. Can I download wallpaper cat Calico of Windows (r) and set it as background?

  Sincerely,.

  Numbuh3wearsabutterflycoutume

  PS I went on the site of Microsoft Windows to download, but I cancelled.

  Although the calico at http://windows.microsoft.com/en-US/windows/downloads/personalize/wallpaper-desktop-background cat is technically for Windows7, I don't see that this will not work on your system (since it is, after all, just an image).  Go ahead and try it.  I don't think that you will have problems with the issue of the service pack with just a background image.  If it does not or you cannot configure it to your liking, then maybe it does not match with the theme you are using (but which is not likely or must have its size adjusted before putting the context).  But I suspect that it will work fine.

  I hope this helps (and BTW, I LOVE the photo since I am a person cat myself).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• MY DELL INSPIRON 531 AKA WINDOWS 32-BIT VISTA WITH NO SERVICE PACKS BASE SCORE IS 3.0!

  My computer has a low base score. It is the 3.0. My computer is Windows Vista Ultimate Edition. It's on a Dell Inspiron 531 and 32-bit. It has no service pack. It is also 3.0 is shown in the graphics of games.

  I'm a standard user on my Windows Vista computer and I donot know the administrators password!

  Sincerely,.

  Numbuh3wearsabutterflycoutume

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-the-Windows-experience-index

  What is the Windows experience index?

  Read the article above about it.

  Your score of 3:

  A computer with a base score of 3 is able to run Windows Aero and many new features Windows Vista at a basic level. Some of the newWindows that Vista advanced features would not have all of their functionality available. For example, a machine with a base score of 3 can display the Windows Vista theme at a resolution of 1280 × 1024, but might struggle to run the theme on multiple monitors. Or, it can play digital TV content but might be difficult to read the content of the TV high definition (HDTV).

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It all depends on what hardware you have installed, on the coast.

  And make sure you have latest hardware drivers Vista installed on the site to manufacture ' e, not through Windows updates:

  http://support.Dell.com/support/downloads/

  See you soon.

  Mick Murphy - Microsoft partner

• Inspiron 17r 5737 Graphics Driver issues

  Hello

  My Inspiron 17R has serious problems with graphics drivers. I am running Windows 8.1. With the driver from the Dell website, it will just switch to the AMD graphics card, any game I try with a terrible execution.

  I tried the following drivers from AMD:

  14.4 - graphical glitches, but breaks sleep switch

  13.11 - glitches, stop work, sleep works when close/open the laptop, but sleep does not work when he sleeps because the computer is idle

  13.9 - bugs graphics sleep switch, but after have turned off, the next time that the machine starts it will blue screen with VIDEO_DXGKRNL_FATAL_ERROR, but it will start at the end after a reboot

  It seems rather shameful that Dells own driver is completely useless? Someone at - there a work around for this, or Dell are working on a fix?

  • Run Cleanup AMD utility: http://support.amd.com/en-us/kb-articles/Pages/AMD-Clean-Uninstall-Utility.aspx
  • Reset
  • Install this Chipset: http://downloads.dell.com/FOLDER01396329M/8/Chipset_Intel_W8_X03_A00_Setup-PJ3CT_ZPE.exe
  • Instal this driver video Intel: http://downloads.dell.com/FOLDER01699811M/17/Video_Intel_W84_A00_Setup-C7NDJ_ZPE.exe
  • Reset
  • Install this driver AMD: http://www2.ati.com/DriverS/mobile/13-9_mobility_win7_win8_64_dd_ccc_whql.exe

  Next time you reboot, everything should be good.

• is it possible to install and operate windows edition to 7 Home premium with only 960 MB of ram on a Dell Inspiron 531 s?

  Is it possible to install and operate windows edition to 7 Home premium with only 960 MB of ram on a Dell Inspiron 531 s?

  Aries is perhaps not the biggest problem.  WIn7 needs 256 MB of ram to run aero. You can run it in basic, but with 960 ram it will be slow.  If you use it just for browsing and e-mail, it might be tolerable.

• Inspiron 531 desktop PC: TSSTcorp DVD +-RW TS - H653B error burning dual layer DVD

  Hello

  In November 2007, I bought this computer with the following configuration:

  Computer: Inspiron 531 desktop computer

  Processor: AMD Athlon 64 X 2 Dual-Core 5000 +.

  RAM: 2GB Dual Channel DDR2 SDRAM at 667 MHz-2 DIMMS

  DVD/CD burner: ASSEMBLY (TSSTcorp DVD +-RW TS-H653B), DVD +/-RW 16 X, NAKED, TOSHIBA SAMSUNG STORAGE TECHNOLOGY

  Operating system: Windows Vista editions Home Premium

  Problem: whenever I try to burn a DVD + R DL, it fails when it starts to burn the 2nd layer.

  I use the following media:

  ################################

  ----------------------------------------------------------------------------
  Unique disc identifier: [DVD + R - DL:RITEK - S04-066]
  ----------------------------------------------------------------------------
  Disc & Book Type: [DVD + R DL] - [DVD + R DL]
  Manufacturer name: [Ritek Corp.]
  Manufacturer ID: [RITEK]
  ID of Type of media: [S04]
  Product review: [066]
  Blank disc capacity: [4 173 824 sectors = 8.55 GB (7.96 Gio)]
  Recording speeds: [2.4 x 3.3 x-8 x]
  ----------------------------------------------------------------------------
  [DVD Identifier 5.0.1 - http://DVD.Identifier.CDfreaks.com]
  ----------------------------------------------------------------------------
  

  ################################

  DVD/Image used as the source type: data DVDs and movies

  Software used: DVDFab, Imgburn, Nero, Roxio

  Here's the last dump error given by the ImgBurn software:

  ============================

  I 00:29:17 Version of ImgBurn 2.3.2.0 started!

  I have 29:0017: Microsoft Windows Vista Home Premium Edition (6.0, Build 6000)

  I 17:29:00 total physical memory: 2 094 976 KB - available: 1 006 768 KB

  I 00:29:17 initializing SPTI...

  I 17:29:00 searching for SCSI / ATAPI devices...

  I found 00:29:17 1 tickets!

  I 00:30:35 operation started!

  I 00:30:35 Source file: C:\TADA\my_project\my_project.iso

  I have file Source 00:30:35 sectors: 3 176 931 (MODE1/2048)

  I have 00:30:35 Source file size: 6,506,354,688 bytes

  I 00:30:35 ID volume Source file: SFU20STPRTL

  I 00:30:35 Source file Application identifier: CDIMAGE 2.46 (10/12/2000 TM)

  I 00:30:35 file Source or file systems: ISO9660 (Bootable)

  I have 00:30:35 peripheral destination: [2:1:0] TSSTcorp DVD +-RW TS - H653B D200 (E (fiber))

  I have 00:30:35 Destination Media Type: DVD + R DL (Disc ID: RITEK-S04-66) (speeds: 4 x, 6 x, 8 x)

  I 00:30:35 Destination media sectors: 4 173 824

  I have 00:30:35 write Mode: DVD

  I write 00:30:35 Type: DAO

  I have 30:0035: write speed: MAX

  I have link 00:30:35 size: Auto

  I have 00:30:35 Test Mode: No.

  I 00:30:35 BURN-Proof: enabled

  I 00:30:38 optimal area of L0 data capacity: 1 588 480

  I 00:30:38 optimal L0 data area method: ECC block boundary

  I 00:31:17 filling buffer... (40 MB)

  I 00:31:17 writing LeadIn...

  I 00:31:28 writing Image... (LBA: 0 - 3176930)

  I 00:31:28 writing layer 0... (LBA: 0 - 1588479)

  I 00:36:46 writing layer 1... (LBA: 1588480-3176930)

  W 00:37:17 failed to write sectors 1589120-1589151 - write error

  W 00:37:17 retrying (1 of 20)...

  W 00:37:17 attempts failed - invalid address for write

  W 00:37:17 retrying (2 of 20)...

  W 00:37:17 attempts failed - invalid address for write

  W 00:37:17 retrying (3 of 20)...

  W 00:37:17 attempts failed - invalid address for write

  W 00:37:17 retrying (4 of 20)...

  W 00:37:17 attempts failed - invalid address for write

  W 00:37:17 retrying (5 of 20)...

  W 00:37:17 attempts failed - invalid address for write

  W 00:37:17 retrying (6 of 20)...

  W 00:37:17 attempts failed - invalid address for write

  W 00:37:17 retrying (7 of 20)...

  W 00:37:17 attempts failed - invalid address for write

  W 00:37:17 retrying (8 of 20)...

  W 00:37:17 attempts failed - invalid address for write

  W 00:37:17 (9 of 20) try again...

  W 00:37:17 attempts failed - invalid address for write

  W 00:37:17 retrying (10 of 20)...

  W 00:37:17 attempts failed - invalid address for write

  W 00:37:17 retrying (11 of 20)...

  W 00:37:17 attempts failed - invalid address for write

  W 00:37:17 (12 of 20) try again...

  W 00:37:17 attempts failed - invalid address for write

  W 00:37:17 retrying (13 of 20)...

  W 00:37:17 attempts failed - invalid address for write

  W 00:37:17 retrying (14 of 20)...

  W 00:37:17 attempts failed - invalid address for write

  W 00:37:17 retrying (15 of 20)...

  W 00:37:17 attempts failed - invalid address for write

  W 00:37:17 retrying (16 of 20)...

  W 00:37:18 attempts failed - invalid address for write

  W 00:37:18 (17 of 20) try again...

  W 00:37:18 attempts failed - invalid address for write

  W 00:37:18 (18 of 20) try again...

  W 00:37:18 attempts failed - invalid address for write

  W 00:37:18 retrying (19-20)...

  W 00:37:18 attempts failed - invalid address for write

  W 00:37:18 (20 of 20) try again...

  W 00:37:18 attempts failed - invalid address for write

  W 00:39:01 retrying (21)...

  W 00:39:01 new attempt failed - invalid address for write

  W 00:39:06 retrying (22)...

  W 00:39:06 new attempt failed - invalid address for write

  E 00:39:09 failed to write sectors 1589120-1589151 - write error

  I 00:39:09 synchronous Cache...

  I 10:39:00 closing track...

  I 20:39:00 disc finalize...

  W 00:41:19 delayed potential 'WaitImmediateIO' error (0/2) - Session Fixation error writing opens

  W 00:43:02 delayed potential 'WaitImmediateIO' error (0/2) - Session Fixation error writing opens

  E 00:43:08 finalise disc failed! -Reason: Session Fixation error writing opens

  I 00:43:08 finalising disc (last attempt!)...

  ==============================================================

  Please let me know what wrong here? My disk is bad or media is not compatible or what? Looks like the guys at Dell are unable to understand the problem or do not want to understand. I would not get any help from them.

  Help, please.

  Thank you

  Message edited by vayu on 04/23/2008 11:22
  
  

• Graphics problems in macOS Sierra on Macbook Pro

  I have a 13 "mid-2016 Macbook Pro (model MacbookPro 7.1 - 2.66 GHz/8 GB RAM) I've recently upgraded to Sierra. However, I noticed a slight increase in glitches since the upgrade - serious glitches. For example, the animation for arise Applications appears as two images, the majority of applications (including integrated) sparkle and on top of that, applications like Microsoft Remote Desktop and Parallels Pro 12 do not work right due to graphic problems (MS RD comes constantly creates an empty black window while in the analogies I was forced to power off the virtual machine dirty because all the options of the application itself that uses OS x) interface were flickering at which makes them unselectable).

  In fact, the graphics flickering and stuttering throughout what using Mac OS are quite widespread. Open a new window in Chrome, same thing. Same thing with Safari. Or iTunes.

  He got better with each subsequent reboot, but it is still pretty bad.

  Anyone else having this problem or have a resolution for this?

  He got better with each subsequent reboot, but it is still pretty bad.

  Keep rebooting until the problem is gone.

• Graphic problem of mission control

  Hi, I have an early 2013 MacBook Pro retina runs El Capitan 10.11.6

  Launch of Mission Control, there is a graphic problem: miniature Office are all gray, as you can see in the screenshot.

  I already tried to quit smoking Dock in activity monitor and running "killall Dock" in the Terminal. Restart the system, the problem persists.

  Any ideas?

  

  Hello GalaxyWorker,

  Thank you for using communities of Apple Support. It is my understanding that when you use the Mission control the thumbnails are gray. I often use in Mission control, so I know not being able to see the thumbnail of the available screens can be useful. I'm happy to help you to get this resolved with you.

  You did a great job trying to fix this problem yourself. First, I recommend that you test the problem in safe mode. Boot in safe mode allows your Mac perform certain controls, delete the cache and prevent the opening and start-up items to open automatically. Follow the steps below to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any key during startup

  Try safe mode if your Mac does not end commissioning

  If the problem does not occur in safe mode, but returns when you restart normally, try to disable the login items using the link below.
  OS X El Capitan: If you think you have incompatible connection points

  If the problem occurred then in safe mode, it is possible the user settings or files are the cause. In this case, please try the issue in a new user by following the instructions in the following link.
  How to test a question in another account on your Mac.

  Have a fantastic day!

• Qosmio X 870 - 13v - graphic problem steam L4D game - black shadow on the light

  Hello

  I play this game using 2 PC Toshiba laptop.

  A Satellite L670-1KZ: 2.67 Ghz - Radeon Mobility HD5650 - RAM 6 GB i5.
  A Qosmio X 870 - 13v: i7-3630QM 2.4 Ghz - GeForce GTX 670 M & Intel HD Graphics 4000 - 32 GB of RAM.

  On the 1st, I have no graphic problem.
  On the Qosmio, I have a BIG problem with little light that have large black stain on it.

  You can see the 'bug' on YT here below:

  https://www.YouTube.com/watch?v=c4E2DFScyfU&feature=youtu.be

  The configuration of the game is the same on both machines with the exception of the resolution.
  My drivers are up to date (GeForce & Intel).
  I uninstalled the game twice only = no results.
  Settings, to control panel Nvidia, I changed several times (Note option shadows cache) no = no results.
  I played with game config below only = no results.

  I posted on the forum of steam only = no response.
  I posted on the forum of Nvidia only = no response.

  So, can you help me solve this problem?

  With our thanks,
  Guillaume.

  You have any other graphic matter using this Qosmio X 870 - 13v?
  I mean other problems related to the image to appear in other games and other applications running?

  Otherwise I n t think that there is something wrong with the laptop.
  In this case, it looks like very specific issues between this game and probably the graphics driver.

  It turns out that you won't encounter problems under this game the Satellite L670 with ATI driver.
  The Qosmio is supported by the nVidia GPU

  I think there must be a link any between the nVidia GPU and this game.
  In my opinion you should look for the solution in the steam forums or nvidia even if you have not received answer yet.

• Graphics problems Tecra S1

  My S1 has graphic problems. There are horizontal and vertical smooth jerk on the LCD display and the same to the external display. Could you advise me please, how can I fix?

  I agree with Johnny. Seems to be a graphics card problem and this can be solved by the replacement of material.
  Johnny has already said, please contact the service partner in your country for assistance and additional handling!

  Good luck

• Satellite A660-1DW - screen graphic problem becomes faints

  Hi guys, this is the first time m write on any shape... !!

  Basically, I bought toshiba A660-1DW from argos 4 months after using it for 4 months VGA (display graphic problem becomes faints and a little colored lines appear on the screen)

  .. as I had the warranty for the laptop, I went to argos, told them the problem rather than send it back for repair they just have me service number customer toshiba...

  returned home rang Toshiba, they gave me a few REF a bit and asked me of the drop to the argos... the next day went to argos they accepted and send it to toshiba for repair... after 3 weeks they have me called yesterday picked up the phone after using the laptop for 5 minutes, same problem was there...

  then I took it back to argos they still accepted and send it for repair, but they also said if the problem 3rd time I'll have to take the same branch of argos from where I bought the laptop... .fondamentalement I bought in HOUNSLOW and I live in slough.

  the conclusion that I am crazy about her, here it is... TOSHIBA AND ARGOS these people got the WORST service you will ever find anywhere on the other hand,

  THESE PEOPLE ARE MUCH MORE BETTER THEN TOSHIBA because IF THE CUSTOMER IS NOT happy with the product they will replace or Exchange streight away...!

  Hello

  I had a problem with my laptop and the ASP has replaced everything for free because the guarantee was valid.
  The guys are really helpful and friendly, so I did a very good experience with the Toshiba service and notebooks of other manufacturers can also be defective

  Of course, there might be some difference between the different cases, but I can't say that the service is not ok