Inspiron 9300-2/3 of the LCD display does not

Similar Questions

• Equium A100-147 - Native resolution on the external LCD display does not work

  Hello

  My Equium A100-147 has 1 VGA and 1 S-Video output, so I use the VGA output on an external LCD monitor with a native resolution of 1680x1050@60hz, but integrated graphics Intel 945 card doesn t give me the correct resolution to choose for this monitor, the closest is 1600 x 1200 and some weird widescreen resolutions other that make my monitor see the scaling an ugly picture.

  So I tested another external monitor with a native resolution of 1920 x 1200 resolution closest gave me Intel drivers is 1920 x 1080, even the installation of two drivers of monitors, remove and reinstall the driver and same formatting the machine and reinstall everything from scratch gave no different results.

  I have another laptop MSI Wind with the same graphic card built in and the same version of the pilot, and the laptop detects both the monitor and the good resolutions for them, this isn't a problem of Monitor driver.

  Seems to me that is a problem with the S-video output, which makes this mess, but there is no way to disable it in the BIOS or any other place in Device Manager I still seem.

  Can someone give me some advice for what can do?
  Thank you!

  Hello

  You cannot choose the preferred resolution because the graphics chip does not support this external resolution or the installed graphics driver is not contained in this resolution. The two cases are possible.

  If you want to know if your graphic chip supports this resolution and then take a look at the user manual and check it.

  If the chip of the graphics card would support this resolution and you will not be able to choose, then that would mean that the graphics driver does not support this resolution.

  But first he must find out what external resolutions are supported by the GPU.

• Color of the LCD display is not clear and stable - Satellite M100

  Hello guys,.

  The color of the screen for my 100 M TOSHIBA SATELLITE laptop computer series is unclear. as he revealed a mixture of blurred colours which is irritating to see.

  The color will become clear and stable if I try to close the laptop to point (IE about 30 degrees) I can't find the screen conviniently.
  This is a recent phenomenon and it is strange for me.

  Can anyone please help me solve this problem?

  We hope to get fast feedback.

  BR
  Uche

  Stand by. I do not understand you exactly.
  Have you noticed this problem on LCD only, but everything works fine on the external monitor or how to understand this?

  You have the same problem when you are in BIOS mode or when you start the operating system in safe mode?

• Contact the Gadget displaying does not correctly vista sp2 X 86

  05/07/2011 uninstalled IE9 now everything works fine, IE9 has also caused other problems. I can reinstall it once they get the bugs out in about a year!

  

  05/07/2011 uninstalled IE9 now everything works fine, IE9 has also caused other problems. I can reinstall it once they get the bugs out in about a year!

• Display (LCD & external) does not

  Hello

  I have a HP NC6400, who gave me a service of quality for many years. Recently the LCD edge and external screens have stopped working.  At the start, they will be flashing for a while but then the external screen goes black and the on-board LCD is very dull.  It began as an intermittent problem that can often be resolved with a reboot, but now it is persistent.

  Read, many of these responsed here, I thought that it could be the inverter, but in all cases it would appear that the external display was still working. The external screen does not work on my system to be connected directly or via a docking station.

  Reflections?

  It turns out that both the interal displays and the external screen were defective (separate defects). I have fixed an in-house with a new inverter.  I have replace the external display.

• IPod 160 GB abruptly stopped, the search results display when connected to a PC. If any song name is typed into the search, it does not display this song while the song is in the Ipod.

  IPod 160 GB suddenly stopped, view the results of a search when it is connected to a PC. If any song name is typed into the search, it does not display this song while the song is in the Ipod. Simply, it displays "no record found".

  Click the magnifying glass in the search box and make sure the entire library search is not checked.

  TT2

• Your route to display the bookmarks bar does not work.

  I carefully followed your directions and the bookmarks toolbar refuses to show. What Miss me? This utility shows no more, then what is it?

  Right-click in the title bar, or in a place of the Bank on the Navigation toolbar does not display a menu with the menu bar or toolbar bookmarks, as well as other menu items?

• type in the navigation bar does not display the web page

  Type the URL in the navigation bar does not appear the page. But when you click on the same URL in bookmarks, page displays OK.

  Hi sidonius,.

  I'll try from Firefox Firefox to solve the issues in Safe Mode. If you do not have the issue so that all your modules, extensions, and themes are disabled, you can try adding them in one by one until you find the culprit. You should look at the guide to troubleshooting Extensions and themes and article troubleshooting issues with plugins like Flash or Java to solve common Firefox problems as well.

  Hope this helps!

• updated my iPad to 9.3 air activate iPad display does not not my account information, but the Mac computer accepts my Apple ID and password

  updated my iPad to 9.3 air activate iPad display does not not my account information, but the Mac computer accepts my Apple ID and password

  A lot of people is affected by this problem, and Apple has worked on the issue.  Some found the following steps useful for this issue:

  Go to iCloud.com and select settings once you are connected.  Click on your device listed there and remove them from the account (not typing not erase or lost mode).  Restart your device and must ignore this lock of Activation screen because you actually disabled the lock by removing the device for iCloud.com

  I hope that helps!

• Fingerprinting and display does not work after the recovery of the system (Pavilion dv7 4080us)

  Hello.

  This weekend I decided to do a restore of the system on my Pavilion dv7 4080us (LW170UAR), as I have done several times previously, using the built-in HP and the recovery etc. partition manager.

  Operating system is Windows 7 Home Premium 64-bit, and everything worked OK with the new facility, with the exception of two things:

  • I don't see my AMD display driver listed on device listing Manager. Only 'Intel HD Graphics Family' is listed under graphics cards. I tried to download the drivers from the support page, but it doesn't help.
  • The fingerprint reader does not work. I tried to uninstall the drivers and software several times, rebooting and everything else I've seen that suggestions on these forums, with the files found on the support page of my laptop. No luck yet.

  I would appreciate any kind of help. Thank you!

  Excellent!  I am happy that you now have the correct drivers installed.

• Every time I start up the Visual display will not.

  Original title: Aero

  every time I start up the Visual display will not.  I have to adjust from the start menu.

  I use a portable G6 pavilion. The screen is set at 1360 x 768 256 colors 60 hertz.
  He only did this recently.
  Any answers please.

  every time I start up the Visual display will not.

  Hello

  What exactly on your screen going bad?

  In the meantime try reinstalling the latest graphics drivers for the computer. Find them in the HP website.

• Extend the display does not - second black monitor

  I have a laptop Toshiba Satellite C655 and I connected a 2nd monitor in order to have two screens to work on.  The screen resolution is set to the optimum level for each monitor, I chose the option "Extend these screens" and each monitor is set to a different refresh rate.  However, the second monitor stays black.  If I click on "Identify", a number 1 appears on the screen of the computer, but nothing appears on the external monitor.  Even the mouse cursor does not appear when low-pressure on this screen. I checked for updated drivers, but Windows says I already installed the best drivers.

  If I go to "Duplicate the poster", the external monitor displays the desktop and the laptop screen is black.   I don't understand.  It was working fine yesterday, but today when I turned on, I'll have these problems.  I even tried plugging an external monitor that is completely different with the same results. Any help would be appreciated.

  I have a laptop Toshiba Satellite C655 and I connected a 2nd monitor in order to have two screens to work on.  The screen resolution is set to the optimum level for each monitor, I chose the option "Extend these screens" and each monitor is set to a different refresh rate.  However, the second monitor stays black.  If I click on "Identify", a number 1 appears on the screen of the computer, but nothing appears on the external monitor.  Even the mouse cursor does not appear when low-pressure on this screen. I checked for updated drivers, but Windows says I already installed the best drivers.

  If I go to "Duplicate the poster", the external monitor displays the desktop and the laptop screen is black.   I don't understand.  It was working fine yesterday, but today when I turned on, I'll have these problems.  I even tried plugging an external monitor that is completely different with the same results. Any help would be appreciated.

  Download (and install) the latest driver for all video player is installed in this laptop specific.  The manufacturer - not Microsoft.

• How to print a selection of an image in photoshop CC, I have problems because in the print window does not display the full image and the printed only a section of what I SELECTED

  How to print a selection of an image in photoshop CC, I have problems because in the print window does not display the full image and the printed only a section of what I SELECTED

  Hi jodepepevalentin,

  In the print menu, check "scale to fit media" under the Position and size of the device and then check out.

  If you want the area selected for printing, check "Print selected area" under the Position and size and specify the size.

  Kind regards

  Claes

• I am trying to download the trial version of Adobe Pro XI but the Download Assistant does not display it in the list despite the signing in. What is wrong with him?

  I am trying to download the trial version of Adobe Pro XI but the Download Assistant does not display it in the list despite the signing in. What is wrong with him?

  I had the same problem - my solution:

  1. If you create a connection to Adobe, make sure that you click the verification link in the email sent to you to verify your account.

  2. I leave the download Assistant, then began the process to download the original page download Assistant - he asked if I wanted to run the already downloaded version, which I chose.

  3. once the download wizard opens again, I logged in using my newly created connection and then, he showed the free trial in the product list (it has not been listed as free, but it was).

  My download is happening now - about 1 hour to go.

• "back" button does not work and the home page does not display on startup

  My buttons next and previous no longer work. They show just gray and I cannot click on them.
  Also my home page does not appear when I launch firefox.
  I reinstalled firefox 4 and then I went back to firefox 3.6.16 and have the same problem in both versions.
  Don't know what to do anymore
  I just found out that when I opened a second window everything works well in the second window, but it still does not work in the first window.
  The same thing happens when I close both windows. The first window of my home page does not appear and the back button does not work, but the second window is operating normally. Including my home page.

  Try:

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox