Inspiron All in one is worth the price!

Similar Questions

• I just want to know if Avanquest SystemSuite 12 and Avanquest Fix - It Utilities Professional of 12 software are good to use and are worth the price?

  Hi all

  I just want to know if these two software are good to use and are worth the price?

  Avanquest SystemSuite Professional 12 - $ 49.99

  Avanquest Fix-It Utilities Professional 12 - $ 39.99

  I intend to try the software but I have my doubts too if the price is right and editing the registry using software is a bit of a long shot, what do you think?

  Any suggestion is welcome here.

  Anyone used software?

  Original title: I just want to know any suggestions of experts

  Hey Ross,

  You can see the following link, the information provided in the following link are as well applies to Windows 8.

  Microsoft supports the use of the registry cleaning utilities policy.

  http://support.Microsoft.com/kb/2563254/en-us

• How can I keep my HP1510 all-in-one to print the test pages as much?

  How can I keep my HP1510 all-in-one to print the test pages as much? My printer is connected to my laptop, and it seems that whenever I disconnect, want the printer print a test page when I reboot. I don't know where the option is to disable this option.

  Pages are likely alignment pages.  When a new cartrdige is installed the printer will print an alignment page which should be placed on the scanner glass and press the button of scan to complete the alignment process.  If the alignment is not complete it will repeat when the printer is powered suite or maybe at the end of print jobs.

  The alignment page will stop printing when the alignment process is complete.  See the page here for more information.

• I have a HP officejet J6480 all-in-one printer. The screen is white and yellow light flashing

  I have a HP officejet J6480 all-in-one printer. The screen is blank and there is this little yellow light flashes on the Cancel button.  I can not print or fax anything because the screen is empty. Since the light started to Flash the entire printer has not worked. Can someone please HELP! : womansad:

  Well, if you haven't tried this and then create a coercive power reset:

  Do not activate the wide (although you can), remove the power cord at the back of the printer. Wait at least 30 seconds, then reconnect the power cord to the printer. Turn on the printer. If that clears up the flashing light/white screen, then try printing etc...

  If this is not the case, see if something visible is originally the error state such as paper jam, odd items in the printer, nothing fancy. Also try to plug the printer directly into the wall outlet as opposed to a look/power surge Strip, or even try a Jack in another room if it is not successful.

• Do I have to pay to download the driver for my printer Dell 966 all in one I lost the driver CD?

  Original title: Dell Printer 966 all in one

  Do I have to pay to download the driver for my printer Dell 966 all in one I lost the driver CD?

  Sam Soliman
  E-mail address is removed from the privacy *.

  You shouldn't if you get it from Dell.

• How one properly installed more than one printer all-in-one (different) on the same pcr?

  Once installed 1 All in one printer, how one installs another printer all-in-one (different model) on the same computer without altering the first installation because all software are the same for each all-in-one printer, with the exception of different drivers linked to each different model all-in-one printer?

  Hello Boothkp,

  From what I can understand in your post, you are looking for a solution install several all in printers on one system, without causing problems during the first installation. This can be easy.

  Lets say you have 2 printer that both use the version 14 of the HP Solution Center software. Then, you install the first complete printer with all the software you want to use. The second installation, you just select the option 'Add printer' or 'Add features', this will add then the second printer in the current center solution without a conflict.

  In case this does not work, then please give more information on the model and the operating system you are working on.

  Kind regards

  Van Baardewijk

• OfficeJet Pro 8500 All in one – disappear from the HP Solution Center guard

  Background:

  I have two HP all-in-one devices, at the office of one while a 8500 A909a and at home and Officejet 7310 all in one.

  My Dell laptop running Windows 7 Professional 32 Bit.

  I had the laptops and printers for several years, the two were connected through connectiosn fine wired via routers with printing/scanning also up and running by the HP Solution Center.

  If I work in the office and he wanted to scan a document I woul open Solution Center and left two printers would come to the top. I could click on the installed 8500 in the office and it worked fine. Even if I was at home I opened Solution Center, click the 7310 and could very well sweep.

  Problem:

  In recent weeks the 8500 keeps disappearing from the HP Solution Center. He still appears in Control Panel and other applictaiosn of windows like Word and I can print again, BUT not is more visible in the solution Center.

  I load the installation of the driver software (recently downloaded from the website of HP, file name OJP8500vA909_Full_14 (1)) and charging/install the 8500. It takes about 20 minutes to make. The 8500 appears then, but with a suffix like Officejet 8500 (7) after him in the solution Center.

  I can scan then very well but the next day when I start and get to the center of the Solution, it has disappeared again. It's infuriating and wastes a lot of time.

  Please tell us what can I do to load the correct software once and for all for allowing me to use two printers without them disappearing from the solution Center.

  Thanks in advance.

  Hi HPhep42,

  Follow the steps below and let me know what happens?

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  Driver and complete software of HP Officejet Pro features

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  Update Adobe Flash Player

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• Pavilion all-in-one 23: Add the second monitor to HP Pavilion CTO all-in-One-23-p110z

  As it is configured, the factory is the "HP Pavilion all-in-one-23-p110z CTO" capable of supporting a second monitor?  I see NO obvious "video inputs" ports.

  Thank you!

  Hi @beckinista,

  Thank you for being an active member of the HP's Support Forums.   I understand that you would like to know if you can connect a second computer monitor 23-p110z all-in-One CTO Pavilion.

  The specifications of the motherboard of your computer show that there not a secondary display port. I have included HP Pavilion 23 - p110z all-in-one CTO Office product specifications and configurable Options and HP and Compaq Desktop PCs - specifications of the motherboard, Boa for your reference.

  I hope the above helps.

• New HP Photosmart 7520 e-all-in-one printer from the box, removed the tape and cartridge access

  

  I have a new HP Photosmart 7520 e-all-in-one printer just out the box. I removed the tape and cartridge access door does not open more than 40 degrees. The figure represents about 80 degrees. I'm afraid to force it. I can't put new cartridges in the printer. Very frustrated trying to get help. It doesn't seem to be a phone number or Web site for direct assistance. HP has really gone down hill. Help!

  Hello

  Mine is about 45 degrees, sufficient space to install the ink cartridges.

  Kind regards.

• HP Envy 2013 all-in-one: where is the wireless button while a HP ENVY

  I can't understand how my wireless is off on the HP Envy all in one. Tried f10, F9, f10... F12 and they change nothing. I don't see any blue or amber light on the keyboard. Any help would be appreciated.

  It ended up working for me:
  
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.
  
  Thank you!

• DeskJet 2050 All - in - One J510a: outside the printable area

  Hi all

  I use-

  W.7, Ultimate, 64-bit.

  Name of the model: Deskjet 2050 All - in - One J510a
  Firmware version:... SLM2FN1006BR
  Serial number:... CN0BD3F28805D1
  Service ID:... 21074
  IK No.:... 670
  Software version:... 028.000.1313.000
  The printer driver version:... 09.84.00.1189

  When you use Word, in Office 2010, I have margins set to 'Normal ' -.

  Top: 0.98 "low: 0"

  Left: 0.12 "right: 1.18"

  Whenever I have insert a border around my text and that you try to print, I was informed that section 1 page borders are defined"beyond the printable area of the page. Do you want to continue? »

  By clicking on 'Help' I read and follow all the different "solutions" available. None allow the page to print.

  I selected all of the selections of available margin different and even selected some of my own under the "custom margins. The page to print with border permits.

  For example, one that I tried was-

  Top: 0.06 "low: 0.57"

  Left: 0.12 "right: 0.13"

  I then clicked on 'Options' under 'Page borders.'

  to the "measure of" I chose "Text" once more, I was unable to print the page with the border!

  I find this very frustrating, and I can't find a solution.

  I would be very grateful if there is a known workaround that will allow me to print a Word document with a border selected.

  (I have no technical experience, and if there is a soluition, I'd be happy to get detailed instructions!)

  Thank you

  ColinX

  Hello

  Your printer can print without margins (IE margin = 0 ").  This printer can print only to a certain margin.

  bottom margin is 0.57 ",
  top margin is 0.06 "
  and the left and right margins are 0.125 ".
  
  So if you try to print beyond this margin, the impression will be cut or outside the printable area.
  
  Kind regards.

• HP Deskjet 3520 all-in-one: I installed the HP utility to scan, but the 'Edit analysis jobs' button is grayed

  I installed the HP utility to scan from my HP Deskjet 3520 to my Mac Book pro, but the "edit scan tasks" button is grayed out. I can only scan one page at a time, but one I want to scan multiple pages

  Thanks for the reply back @cjbd,

  You are able to open the HP scanning software when you perform a search from the Mac?

  You try to scan several pages from the printer to the Mac or from the HP scanning software?

  You should be able to open the HP scanning software and edit everything from there.

  Normally, you can select PDF to scan in a single file multiple documents if that's what you try to do.

  Because this model only has a dish, you must be notified to scan another page.

  Here is a document for digitization of the control panel of the printer: HP Deskjet 3520 e - all - in - one and HP Deskjet Ink Advantage 3520 e-all-in-One Printer Series - how to perform a scan: from the control panel.

  If the HP scanning software does not work, you will need to uninstall and reinstall the software again.

  I handed the document to uninstall: Printers HP - uninstalling the software of the printer (Mac).

  Here is the link to the drivers: HP-inkjet ink-SW-OSX - Mavericks_v12.34.40.dmg

  Please get back to me. Thank you!

• HP Photosmart 7520 malfunctions of e-all-in-one printer on the clock

  This e-all-in-one printer from HP Photosmart 7520 bought last week and cannot issue to reslove the awakening. Printer goes to sleep as the value, and to wake up, BUT with an error message on the display. I tried AUTO ON / OFF and different sleep wait times but nothing helped.  I can't believe the USB cable or the PC/software is to blame because the wake-up printer, but in a State of dysfunction and should now be in the off position, then press. The answers to this problem.

  JMcKenzie2006,

  Welcome to the HP Forum.

  The following workaround solution should correct the problem - basically how to turn off the sleep function.  It works when all other options have failed to solve the problem: assigning static IP, small insect sacrifice, swearing, all sorts of settings...

  Be aware: I do not know the consequences - if any - turning off the sleep function.

  Printer PhotoSmart 7520 loses wireless - system Mode Timeout Set to zero

  Apologize up front for imprecise language and the way in which this must be done: is a solution and not a standard procedure.  Its use is optional.

  Click on the Thumbs-Up Kudos to show that you appreciate the help and time of our Experts.

  When the answer is a good fix or workaround, click accept as Solution !

  Although I strive to reflect best practices of HP, I do not work for HP.

• HP officejet 8500 has plus: Hp all in one application for the iphone 6 s

  Hi guys!
  
  I jist downloaded the all-in-one application on my iphone 6s and I can't seam to find where the scan registers in fact. There is to save it in my photos?
  
  Thank you
  
  Rocco

  Hello Rocco,

  The HP All In One remote saves scans to an internal folder.

  For easy access to scans, you can click the settings of the app (the icon in the top right 3 points) and then select settings.

  Select sharing, from there you can choose to synchronize Documents and scans will be automatically uploaded to iCloud, then it will be available in your Photos app on the assumption that it is defined on the same iCloud account.

  See you soon,.

  Shlomi

• HP 4315 all-in-One: application of the HP Solutions Center in point 8.1 of Windows

  Windows 8.1 installed and reinstalled driver for HP 4315 All In One.  The HP Solutions Center's application is not found and I can't locate it on the web.  I followed the link to HP, but the solution Center wasn't there.

  Hello

  Only a set of available drivers for your printer for Windows 8.1, the HP Solution Center is not available for any later operating system.

  You can find no workaround available HP solutions Center below:

  http://support.HP.com/us-en/product/HP-OfficeJet-4315-all-in-one-printer/1138382/model/1138383/document/c03467277

  And below, you can find no workaround available for the box program to HP tools:

  http://support.HP.com/us-en/product/HP-OfficeJet-4315-all-in-one-printer/1138382/model/1138383/document/c03467279

  Kind regards

  Shlomi