HP officejet 8500 has plus: Hp all in one application for the iphone 6 s

Hi guys!

I jist downloaded the all-in-one application on my iphone 6s and I can't seam to find where the scan registers in fact. There is to save it in my photos?

Thank you

Rocco

Hello Rocco,

The HP All In One remote saves scans to an internal folder.

For easy access to scans, you can click the settings of the app (the icon in the top right 3 points) and then select settings.

Select sharing, from there you can choose to synchronize Documents and scans will be automatically uploaded to iCloud, then it will be available in your Photos app on the assumption that it is defined on the same iCloud account.

See you soon,.

Shlomi

Tags: HP Printers

Similar Questions

  • Misalignment of the heads - Officejet Pro 8500 has more e-all-in-one printer A910g

    Oops.  Typical message in subject line.  I'll try again.  I have an Officejet Pro 8500 has more e-all-in-one printer A910g.  I replaced my cartridges of ink three colors, and cannot print, print jobs are in the queue... and I get an error message on the display screen 'alignment failed.  Refer to the documentation for the device for more details. "Also, even though the level of ink Cyan poster now full on the screen, I get no blue on the print head alignment test document.  Help!

    I'm sorry that you are experiencing this issue. Sometimes, when you get this error message, maybe it's the ink or printhead may need to be cleaned.

    Here is a link that can help you with this problem.

    http://support.HP.com/us-en/document/c02207121

    Let me know if it helps. This isn't a software problem, you do not have to uninstall the software and things of this nature.

  • HP Officejet Pro 8500 has more e-All-in-One Printer - A910g. -Fax Confirmation Page

    I have the HP Officejet Pro 8500 has more e-All-in-One Printer - A910g. It works very well, but how to make a page of confirmation by fax, with the impression of a miniature of the 1st page of the document I sent?  I checked the configuration information, but apparently not have indications confirm that I sent the fax through the confirmation page with a small impression.

    Hi dtaylor569,

    Follow the instructions below.

    To activate the fax confirmation
    1. press the arrow to the right and select Setup.
    2. press on the configuration of the fax, click Fax reports.
    3. press on the Confirmation Fax.
    4. tap to select one of the following options.

    • Discount - does not print a fax confirmation report when you send and receive faxes successfully. It is the default setting.
    • (Fax Send): Prints a report of fax confirmation for each fax you send.
    • On (fax) - prints a report fax confirmation for each fax that you receive.
    • On (Send and Receive) - prints a report fax confirmation for each fax that you send and receive.

    Prints a report of fax confirmation for each fax that you send and receive.
    To include an image of the fax on the report
    1. press Setup.
    2. press on the fax, click Fax of Confirmation reports.
    3. tap on (fax) or we (send and receive).
    4. press on the Fax Confirmation with the image.

  • What is the best photo paper 4'x 6' for HP Officejet Pro 8500 has more e-all-in-one Printer?

    1 - HP Officejet Pro 8500 has more e-all-in-One Printer

    2 - operating system: Windows 7-64

    3 - no error message

    4 - no change

    5.-j' have been printing in my old ' hp premium more photo paper "and get very dark pictures and wasted too much ink.

    I've been using "hp premium more photo paper glossy" and get very dark pictures.

    Before this printer, I used a Deskjet 5550 with the same paper and get great quality.

    Thank you. Luis Cuenca

    HI cuencaky,

    Here a link to a page with an example of a good 4 X 6 photo paper, you can use with your printer.

    This type of paper is known to work very well.

  • HP Officejet 6500 a Plus e-All-in-One - E710n ' slow printing - cannot scan.

    Windows 7 64

    HP Officejet 6500 a Plus e-All-in-One - E710n

    Wireless connection

    Until recently, I noticed that it takes a good 45-60 seconds to print. From the moment that I hit print say at the start of the printing printer. Real bummer, but today I tried to scan and got an error "Scanner communication cannot be established... "I've uninstalled all the drivers and the printer and reinstalled same thing any suggestions I have to be able to scan.

    Hey alsmith1964,

    It seems that the network communication between the PC and the printer has become lost or locked up.  The first step, I would suggest in this case is to perform a cycle of power to all devices in the network circuit.

    Follow these steps to reset your printer HP, your router and your computer.

    1. To turn it off, press the power button on the HP printer.
    2. Unplug the power cord at the back of the HP printer.
    3. Unplug the power cord from the wireless router.
    4. Turn off the computer.
    5. Wait 30 seconds.
    6. Reconnect the power cable to the wireless router.
    7. Wait 30 seconds, or until the router is completely ready.
    8. Turn the computer on.
    9. Wait for the computer to recharge.
    10. Reconnect the power cord to the back of the HP printer.
    11. Turn on the printer.

    I would like to know if it is able to get the question to be resolved,

    Jason

  • HP Officejet Pro 8600 e Plus: HP Officejet Pro 8600 Plus e-All-in-One Printer series - N911g and instant ink

    Morning

    Does anyone know if the HP Officejet Pro 8600 Plus e-All-in-One Printer series - N911g is compatible with the instant the ink program?

    Thank you

    Stuart

    @StuartTunstall

    Welcome to the HP Community Forum - we are a community of fans of HP !

    It seems that your printer is not eligible.

    Connected - HP Instant ink > FAQ > my printer is eligible for the moment ink HP?

    I also checked the datasheet for your printer and did not find any indication of instant support of ink.

    Time for a new printer HP brilliant?

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    Fixed / responded? Click this post accept as Solution to help others find answers.

  • How to connect a USB modem fax when the phone line is connected to a HP OfficeJet Pro 8600 Plus 4 - all - in-one?

    So I have a HP Office Jet Pro 8600 Plus (4-all-in-one) that I normally use to fax documents for commercial purposes. I became more and more tired for the first printing of documents directly from my computer to be faxed to another office. It is a waste of paper, ink and time. For this reason, I would like to set up a fax modem so I can use Windows Fax & Scan on my Gateway with Windows 7 computer so that I can directly fax documents from my computer to the recipient fax. The only question is, I have a phone line that I use for my fax and which is directly connected to the fax machine, but I understand a Faxmodem USB also plug into a phone line as well. How can I configure the USB fax modem without compromising the current telephone line attached to my fax machine? Do I need a splitter? I can still use my fax machine to receive faxes and fax all paper document not found in my computer (for ex. documents I received by mail).

    It is always profitable read the documentation provided with the device.  If you had, you would know that the software provided with it will allow you to fax documents directly from your computer without printing it and scanning first.  Download the software (and the user's guide - page 63- here.

  • HP Officejet 8500 has plus: HP Officejet 8500 has more

    Work very well until the magenta cartridge was missing. Gone is where you will store got all new cartridges...

    Now the blue cartride does not print and it's new. Test page shows nothing - blank for this color = all others fine.

    Thanks for the help.  I had already used the function of print head cleaning, and he did note. I think I used all auto functions available and nothing has worked. So I removed the print heads, and against some inet warnings, wiped them, put their back makes it a hard reset and had a hammer ready to do the final solution. I looked up to the replacement cost of the print heads, then sought a new printer, that would be less than to change the printheads. Finally, in desparation, I turned it off and went to bed. Next day morning turned all back on and tried to print, and it has worked flawlessly.

    Not sure why the hard reset earlier did not work, but my getting little done sleep. Maybe I should officially recommend this...

    Thanks for the help.

    Dave

  • I FORGOT the ADMIN PASSWORD FOR - (WEB PAGE) - HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

    Hi all

    I changed my network SSID & PW but I forgot the password for the printer web page.

    Password was written in a notebook and notebook is moved at the moment by the cleaning person.

    Please HELP! Is there anyway I can reset the printer so that the admin password is also re-set. I try to reinstall the software printers, also I am not able to change the ip address and right now, there is no ip address... get no link and no ip address and no network... Please anyone who can help... Please help.

    * I read some part... to power off the printer, then press the power button on... and continue pressing the back button where he would have, for some time the printer is back back (it was to reset the printer)... which is about 23 times... zero.

    I really want to THANK you ALL for READING THIS & YOUR TIME. So please help if you can...

    and ideas?

    Thank you, xxVEGASxx

    * xxVEGASxx *.

    You can do a reset of the printer using the LED screen on the printer.

    Select Configuration, then Tools, then restore the default settings. "Restore default settings" is the last element of the list and you will have to scroll down to see it.

    Which erases all settings, including the password for the printer.

    To reset you describe is probably the one mentioned in this article:

    http://resetprinters.com/how-to-reset-the-HP-OfficeJet-Pro-8600-premium-all-in-one-printer/

    but it's probably a deeper reset that you really need anyway.

    -Seth

  • HP Officejet 6500 a Plus e-All-in-One - E710n Flashing lights, do not print

    It doesn't matter what I do, blinking lights on the printer.  The machine does not print and gives an error every time I try.  I had this problem last week and I cleaned my printer cartridges and the holder and that fixed it, but now the cartridges will move yet for me to check out them.

    Janet

    Hi Katze407,

    It seems that the printer can be stuck somewhere. Here are two guides to help you try to find the problem:

    'Paper jam' message displays on the all-in-one

    "A 'carriage Jam' or ' 0X610000F6" message

  • HP 4315 all-in-One: application of the HP Solutions Center in point 8.1 of Windows

    Windows 8.1 installed and reinstalled driver for HP 4315 All In One.  The HP Solutions Center's application is not found and I can't locate it on the web.  I followed the link to HP, but the solution Center wasn't there.

    Hello

    Only a set of available drivers for your printer for Windows 8.1, the HP Solution Center is not available for any later operating system.

    You can find no workaround available HP solutions Center below:

    http://support.HP.com/us-en/product/HP-OfficeJet-4315-all-in-one-printer/1138382/model/1138383/document/c03467277

    And below, you can find no workaround available for the box program to HP tools:

    http://support.HP.com/us-en/product/HP-OfficeJet-4315-all-in-one-printer/1138382/model/1138383/document/c03467279

    Kind regards

    Shlomi

  • HP Officejet Pro 8600 Plus e-All-in-One Printer - model N911g - Nr CM750A print head

    I have the print head seems to be missing, not detected, or improperly installed, a message. Despite all recommendations of HP reselve by train this problem nothing works. What should I do next?

    In general, this error when an electrical connection between the printead and the printer problem.  Have you tried to remove and wipe the electrical contacts of the printhead (at the back) own?

    Thus, there is a document with the steps to resolve this error message.  The document can be accessed here.

    If you follow all the steps and get to the ' four Solution: replace the print head, "then the next step will be to call the HP Technical Support about this problem.

    If you are still in warranty, HP can replace the printhead without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

    Technical Support case HP formula call: https://h10025.www1.hp.com/ewfrf/wc/phoneInput?cc=us&dlc=en&lc=en&product=5061082

  • HP Officejet 6500 a Plus e-All-in-One - E710n

    This printer is adjustable to print a selection highlight rather than the page as a whole?

    I assume that you do not want to print part of a Web Page?

    If so, you can check the addon HP Smart printing :

    http://support.HP.com/us-en/document/c02994297

    If not, please specify what software you want to print from.

    Kind regards

    Shlomi

  • HP Officejet 6500 a Plus e-All-in-One - E710n I want to print on a standard size postcard

    I want to print on a standard USPS postcard (3.5 x 5.5 "), but I don't know if I can do it. The manual says we can't print out a 3 x 5. I don't know how to load the postcard. When I push the medium on its back where the paper goes... He just keeps flowing back in the recesses of the printer, which would obviously result in a horrible jam. I certainly don't want to cause a jam. Anyone know if this is possible?

    Hello

    Yes, the #24 of the next book page shows you how:

    h10032.www1.HP.com/CTG/manual/c02519721.PDF

    You will also see the #35 page.

    Good luck.

  • 8500 has Plus size difference e paper when copying

    HP Officejet Pro 8500 has more e-All-in-One Printer - A910g

    For several months now, I can print wireless or scan then print wirelessly with my printer, but I can't copy anything without getting the "paper mismatch error - paper detected does not match the size or the selected type. Make sure the paper size or type is correct continue the work. "

    I use only 8.5 x 11 paper for all printing. Don't understand why only the copy function gets this error. I had scan and then print all the pages I want to only copy.

    Printer will not print Printer Status Report, and then the error message it says small paper will not work. Without the report I don't know what version of firmware is used. Printer also not said no update firmware available.  Return to the status of the plant does not help.

    OK, I suggest to call HP@8004746836 and see what options we have to repair or replace the unit. It seems that the sensors are on the printer.

Maybe you are looking for