Instalation of Windows xp disc

Similar Questions

• New hard drive installed. Windows 7 disc need to install

  Hello

  The HD has not in my laptop dell inspiron.  I bought a new HD and now need to install windows 7.  Is now available for download from the Dell support site. ??

  No Microsoft removed the Digital River downloads for Windows 7 and replace them with a recovery of Microsoft software tool that blocks the Dell OEM licenses.

  If you have warranty, contact Dell Technical Support for a reinstallation/recovery USB DVD.

• I have a linux operating system and I would like to remove it and install windows xp. I'm afraid that if I wipe the drive, I'll be unable to boot the windows xp disc. Is this true?

  I have a linux operating system and I would like to remove it and install windows xp. I'm afraid that if I wipe the drive, I'll be unable to boot the windows xp disc. Is this true? What is the best way to remove the linux operating system and install windows xp?

  original title: HOW I CAN UNINSTALL LINUX OPERATING SYSTEM

  If there is absolutely nothing on the disk you want, just format the drive and install Windows XP:

  1. start from the CD. You may need to change the first boot to a CD device in the BIOS. To do this, when you switch on the look for a configuration message indicating what key to start typing, F2 and del are commonly used. The message appears for very long and it you miss, you have to restart the computer. In the BIOS, look for a section that contains the boot sequence, change it to CD, save it and let the computer to restart.

  2. the installation sequence is answering the message press any key to boot from the CD, and then press ENTER to set up Windows, press F8 to accept the EULA, delete the partition, press ENTER, type L to confirm delete, type C to create a partition, choose (Quick) format. Then begins the installation and restart will therefore ignore the subsequent message to press any key to boot from the CD-ROM.

  3. actual installation will begin and takes about 30 minutes. Finally, download all the missing Windows service packs and other updates.

• ENVY of HP dv7 Notebook PC: install Windows 8 discs HP

  I just ny laptop from HP repair center a week ago and I already had to perform a system reset.  I tried to reset my laptop and the message I got was, ' cannot reset no, because no disk partition detected ".  I called HP and they could not help, they told me that I have to reinstall Windows 8 and they post the discs to me.  HP blamed the problem of the partition on the fact that I had Windows 8 is installed and then I downloaded Windows 8.1 store Windows and it screwed in place the parition.  This answer has any sense at all to me.

  As I mentioned earier, HP is mailing me new Windows 8 discs. However, the technical support representative HP told me that the discs do not come with a product key.  How can I perform a clean installation without Windows product key?

  Yes at the time the upgrade of the OS is corrupt or delete the recovery partition, especially when it formats the disk.  It is always better to create recovery disks when you get the computer.

  The key of Windows 8 is embedded in the BIOS and not need to know the key when you reinstall, the installation will recognize the key.  If you want to know what your key, download Belarc Advisor, and it will give you all kinds of information about your computer: http://www.belarc.com/free_download.html

  It is best to upgrade to 8.1 Windows because it is more stable and with the new Windows 10 to come this year you will be eligible to get the free update if you are running 8.1

• I decided to do a clean install of windows 7, but when the disc it stops to extend windows files 0% I do not know why this happens is the drive.

  Original title: Windows 64-bit clean

  Ive recently done my 2nd attempt to install windows 7 64 bit and ive met the same problem, I have formatted and deleted all the data ln my drive hard amd decided to do a clean install of windows, but when the disc it stops expanding windows files 0% I don't know why this is happening is the disc

  You have all the features non-essential connected to the computer during installation? If you have external storage media connected, disconnect them.

  It is also possible to reinstall your Windows 7 media is corrupt. You can try to download a new copy and try again.

  How to: What are my options for Windows 7 reinstall media?

• Can I install Windows 7 Pro on Windows 8 Pro Hyper-V with OEM Windows & Pro disc.

  Can I install Windows 7 Pro on Windows 8 Pro Hyper-V with OEM Windows & Pro disc. I have a laptop windows Pro 8 and a lot of programs that I use is not compatible with 8. So, I enabled Hyper-V so that I can install Windows 7 Pro on the virtual machine, but I bought a bad DVD because it is an OEM. How can I can go about this.

  If it's a Windows 7 Professional OEM System Builder License, Yes, it will work fine.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :

  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

• Do I have to do a clean install of Windows 7 upgrade disc?

  Hello

  I use a retail version upgrade of Windows 7 Professional 64 bit on a desktop PC, I've implemented myself 4 years ago.  I have upgraded to Windows XP then.

  I think I would buy a new card mother and CPU in another year and I hope that my current installation of Windows 7 on my hard drive (fairly recent) current will be able to start with the new MB and CPU - and just to require new drivers for chipset.  However, I know that this will not work and I might have to reformat the drive and do a clean install of Windows 7.  I'll be able to do it from my Windows 7 upgrade installation disc?

  Unfortunately, I got rid of my old XP drive because I'm moving soon and I threw it without thinking.  Do I need to reinstall Windows 7?  I still have my old XP serial number and product key, and of course, my Windows 7 product key and serial number.  Also, I have an old system repair disc and could make another if this will help.  Thanks for your advice.

  Zaid

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  Try the following:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Windows 7 disc need to install

  My hard drive died. I don't have a recovery disk. How to get a Windows 7 installation disc? I have the product key. Thank you.

  Download Windows 7 proper. ISO file (must match for your product key version)

  Windows 7 Home Premium 32 Bit: http://msft.digitalrivercontent.net/win/X17-58996.iso
  Windows 7 Home Premium 64-Bit: http://msft.digitalrivercontent.net/win/X17-58997.iso

  Windows 7 Professional 32 bit: http://msft.digitalrivercontent.net/win/X17-59183.iso
  Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.iso

  Windows 7 Ultimate 32 Bit: http://msft.digitalrivercontent.net/win/X17-59463.iso
  Windows 7 Ultimate 64-Bit: http://msft.digitalrivercontent.net/win/X17-59465.iso

  After you download the .iso file using ImgBurn or gear to create a DVD ISO bootable.

  Create a Windows 7 Bootable DVD using the. ISO file
  Engraving of a file of Windows 7 ISO on a DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
  Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
  (The steps are the same, except that you do not create a repair disk but complete an installation DVD)

  Note: Always use DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.

  ====================== Keyless Install ================================

  How to make a 'Keyless Install"of Windows:

  Boot from the Windows 7 DVD disc, you create and launch the installation.

  After entering the username and password you will be asked to: "Enter your Windows product key", do not enter a key.
  Also located right underneath the box where you must enter the key is a box with a check box 'Automatically activate Windows when I'm online', remove the checkbox and click "next".

  You now have a 30-day grace period to activate Windows.

  During this 30-day grace period you can try to solve your problems.
  After you are satisfied with all the problems have been resovled then activate Windows.

  ====================== Device Drivers =================================

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  = How to activate Windows 7 by Internet =.

  1) click Start and in the search for box type: activate
  2) click on the 'Activate Windows' option at the top of the list
  3) click on "now, activate Windows online.
  (4) enter your 25-character product key (not case sensitive)
  5) click "Next" and wait for the key must be verified.

  Another method - to reach a real person:
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  J W Stuart: http://www.pagestart.com

• Can I reuse my Windows 7 disc to install Windows 7 on another computer after I have enjoy the Windows Anytime Upgrade?

  Hello

  I think to upgrade my computer to Windows Home Premium to professional using the Windows Anytime Upgrade. Once that was completed, I use my original Windows 7 disc to install the operating system on another computer?

  See this post from a user with the same question:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/can-i-upgrade-my-OS-reuse-original-license-on/d218ff2b-BC84-416e-94fc-456be22a6ed6

• The clean install of Windows 7 Home Premium x 64 without installation disc.

  Hello

  I recently bought a Toshiba laptop with a Home Premium Windows 7 x 64 preload version.  It has not come with a Windows installation disc.  I want to reformat the hard drive and put on a clean version of the same operating system.   Right now my only solution is to find someone with a disk or an iso.  Which turns out to be harder than I thought.   Is it possible to make an image of Win 7 Win 7 without having to make a picture?

  I also own a copy of Windows 7 pro x 64.  Can I use this disc to install, with the key of Win 7 Home Premium?

  Thank you

  FatherFinch

  If you perform a "clean" of Windows 7 Home Premium installation, you will need to buy Microsoft Windows 7 Home Premium 64-bit.  Someone else using Windows 7 disk is not allowed under the terms of the license Microsoft Softrware.

  Q: I also have a copy of Windows 7 pro x 64. Can I use this disc to install with Win 7 Home Premium key? 

  A.   No

  Carey Frisch

• disc instalation for windows 7 ends

  I got my windows 7 stolen instalation disc and the stolen desktop drive, so regarding the upgrade to windows 8 will I have a problem

  Windows 7 and Office are still installed, could you simply retrieve the product keys:

  Here are four utilities, which can display your product keys if they are still there:
  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.)

  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and RockXP: http://www.majorgeeks.com/download4138.html which has additional features

  Additionally, if you are considering upgrading to Windows 8, make sure that you back up your installation of Windows 7:

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  In order to install Windows 8 Pro upgrade, you must first reinstall your original version of Windows that has been run on your computer before installing the Windows 8 Preview version. If it's (Windows XP, Vista or Windows 7). After installing it, you can then do a upgrade to Windows 8 Pro. The output preview Windows 8 does not support upgrades to Windows 8 Pro. Windows 8 Pro will be available October 26, 2012.

  The upgrade from Windows 7 to Windows 8

• My hard drive crashed and the only disk operating system that I can find is my Windows 7 upgrade disk. Can I do a full install on a blank disc of this?

  My title pretty much sums up my problem.

  I need to buy a new hard drive.  All I have is the Windows 7 upgrade disk I bought for some time.  I can the Windows 7 installed on this drive, or I have to buy a copy of Vista/XP to install and upgrade?

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Question seeks to clean install 10 Windows on the drive of the merger. El Capitan.

  Problem: try a clean install of Windows 10 via the Boot Camp Assistant on an iMac 27 inches (Late2013) with 10.11.4 installs hours (more than 8 hours) and then failed to install Boot Camp updates. Essentially installation take much long than normal and cannot install updates of the Apple software or create normally start Windows Boot Camp 10.

  Background: After problems of slowing down after upgrading to 10.11.4 (with improved Bootcamp Windows 10) who had previously worked fine for 10 months, to the point of a start of OS X time, I decided to do a clean install of my iMac with Fusion 3 to disk.

  As I was unable to remove the partition from Boot Camp through BCA because of his holding always at the same load, I used Internet recovery and reset the Fusion drive. This then required me to repair the partition of Fusion by car through THE "fix" option which seems to work very well. And reinstalled OS X 10.11.4 which works fine now (delays etc..)

  Try using BCA to create a new partition Boot Camp and a clean Windows 10 install after downloading an image of disk W10 directly from Microsoft (Win10_1511_1_English_x64), BCA by downloading software updates and by selecting the desired partition, it began to restart and initialize the installation. However the whole process has been very slow, each step takes much longer than usual, to progress. Leave for hours rest a blank screen or with a circle of rotation.

  I tried with another stick USB 3 and also a USB 2 stick, but none has made a difference.

  In the last attempt, I left running overnight and after 8-9 hours, he finally reaches the top of desktop Windows 10 and the update of Apple Bootcamp starts to load updates. However, he just hung and even after 2 hours, nothing was. Reboot and try once again has been the same.

  After that I tried to create a Windows Installer via BCA 8.0 however it gives just a TPG error when you try to select the drive (due to el Capitan I guess?)

  After four days of efforts, I'm a loser on how to get the Windows 10 on the Boot Camp partition. I can't even install W8 and upgrade due to the error of TPG.

  Any help or suggestions how to proceed with the diagnostic / resolution of the problem would be appreciated.

  Details:

  System: iMac (27 inch, end of 2013), 3.4 GHz Intel Core i5, 16 GB 1600 MHz DDR3, NVIDIA GeForce GTX 780 M 4096 MB, OS X 10.11.4

  • Nothing other than the keyboard and mouse attached via the USB ports, as well as the key USB of BCA. No other attached devices.
  • Reset memory NVRAM, SMC and ran more than once disk utility. No problem not reported.  Ran NVRAM reset before each attempt.
  • At ran EtreCheck report which seemed OK.
  • Verification of diagnosis ran who is childless.

  A detail I noticed after the merger by car there are now two Macintosh HD images when you use boot option. One previously. Are named "Macintosh HD" and "Macintosh HD2". I remember being Yosemite simultaneously in three, but which has been fixed in an update.

  In addition, it seems that no recovery partition. Cmd + R lance Internet recovery.

  Distill the results (the Boot Camp partition removed):

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB internal drive 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk2 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk2

  1: disk2s1 NO NAME 209.7 MB EFI

  2: disk2s2 Apple_CoreStorage TB 3.0 drive internal

  3: disk2s4 Apple_Boot Boot OS X 134,2 MB

  / dev/disk3 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk3

  Logical volume on disk0s2, disk2s2

  7BE1F343-ACBE-4144-BF86-C838BE1E49D4

  Fusion unencrypted drive

  iMac - simon: ~ list of cs simon$ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group CA0B8D0A-6315-4E85-B313-52AB509473F2

  =========================================================

  Name: Internal drive

  Status: online

  Dimensions: 3121237860352 B (3.1 TB)

  Free space: 0 (0 B) B

  |

  +-Physical volume 5E75EE74-EE1F-4FCB-A0C5-9ED5517FEB93

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 91D639D6-634E-47C1-AFE5-616CE12E71E0

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk2s2

  |   Status: online

  |   Dimensions: 3000249008128 B (3.0 to)

  |

  +--> Logical volume family EE9934AC-F3CB-4101-ADB6-576F4371B4B9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 7BE1F343-ACBE-4144-BF86-C838BE1E49D4

  ---------------------------------------------------

  Disc: disk3

  Status: online

  Size (Total): 3106705375232 B (3.1 TB)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  Summary:

  Q1: Should it take 4 + hours to install Windows 10 via BCA?

  Q2: Al must ultimately be so slow when initially W10 desktop?

  Q3; What I do once I arrive at the office of W10 but it automatically updates the graphics driver as BC update is simply suspended for centuries and get a working driver to restart at least W10?

  Q4: is there a problem with the disk HARD the Drive of Fusion that is causing all this delay and slow install / boot? ON the clean install OS X 10.11.4 it is back to be fast as usual and all tests show things are OK but W10 goes on the part of the HARD drive. No way to verify this beyond diagnosis or Etrecheck?

  Q5: Y at - it no problem with the GPT / MBR that may be causing the delay etc. ?

  Q6: How can I use my existing WindowsImageBackup backup from the previous W10 with the BCA install usb drive or how to create a USB stick otherwise recovery disk with my other single Mac have W7?

  Q7: How can I install W8 as I once did on Yosemite, via el Capitan without a mistake to TPG on selection of disc?

  Details:

  Day 5. Attempt at 6.

  Partition Boot Camp delete and try again install via BCA. First question, is that when the startup it goes to a blank black screen. For a time nothing left. Reset then using alt to select windows training results in almost instantaneous startup of the BCA message created and the beginning of the installation.

  4 1/2 hours from start of Windows 10 initial signature window.

  Then the second question. One to reach the Boot Camp update Office tries to start and install the drivers. Allows you to "list files...". "stage then sits at the bar about 5% green for 1 to 2 hours and does nothing. All actions in the Office of the W10 takes ages.

  In the meantime, auto update of the W10 appears a message saying that the updated graphics drivers as one of the few messages or actions during this period. Looks like Nvidia install with the entire package of experience (unwanted) etc. and very probably not the correct gpu driver.

  Finally deciding to cancel the installation of BC by killing the Setup.exe process. Then copy Boot camp install files on the desktop. Lasts 30 minutes to copy. Run again and this time, although taking 15-20 minutes to download and install later with the success message.

  Check the graphic driver it shows a yellow exclamation mark, so the following Microsoft instructions I use the uninstall option via the device and then Manager (slowly) come on board to load and download the latest Nvidia driver on their site for the GTX 780 M for 64-bit W10 etc. The same thing that I had used previously. Slow with running the Nvidia Setup program again, but eventually it works only to say that he could not install as unrecognized graphics device...

  He ends up with Microsoft PnP driver so it's at least sufficient start and run it again BC of the figure updates as all other drivers have been installed. To restart, but I get an error of K-Mode that is most likely related to this driver graphic and not possible to start in the new W10 Boot Camp partition after 7 hours.

  I have a picture of W10 backup recovery (WindowsImageBackup) I've had in a few weeks, but it will not install bet for the installed W10. I try with the ACO created the USB windows but can't seem to get a way to get into recovery mode and to get the menu to install it. I don't have a way to create a USB W10 recovery key now because my other Mac has just installed W7.

  Finally I tried to count a reset of the Recovery boot up option but it seems that it will take longer to start.

  I also went to the recovery and selected Boot Mode safe, but it opens on an empty black window and he's here doing nothing.

  Looks like I'll have to restart on via BCA and reinstall and try and solve the problem of graphics in order to install driver updates from BC and restart to W10 and hope that with the drivers, it returns to the operation and the normal starting time. Then update the gpu driver.

  I used and installed Boot Camp several times with over the years including previously an upgrade of W8.1 > W10 I used for over 6 months without problem. I've never known these installation very long or ice once in Windows even for the initial start upward.

  For any help or suggestion would be appreciated, and this seemingly simple process has now expanded to five days.

• Install the Windows own 8.1 to want Phoenix 810-230qe?

  I just bought a HP Envy Phoenix 810-230qe with Windows 8.1 Pro 64-bit.  It's my first HP system and so far I was impressed by the HP control process, fast delivery and the computer itself from what I can tell so far.   However, I have a question.  How must we do to do a clean install of Windows 8.1, without all the additional software that comes standard with the system?

  With my previous Dell systems, I have always asked for a Windows DVD and I downloaded the necessary additional drivers from Dell.  I bought a set of HP System Recovery install discs are expected to be able to do a cleanup, but unless I'm missing something, I don't see any options for loading just the Windows operating system and the related system drivers.  I see there are a few available through HP suspport drivers, but not all that are necessary and I see still no way to do just installing the OS.

  How is that possible?  Thank you...

  Hello

  You have the Win 8.1 drivers on your PC now located in the folder in C:\SWSETUP.

  Copy this folder to an external drive for use later when necessary.

  I don't know if you can download the 8.1 Win. ISO from Microsoft with an OEM product key. You couldn't do that when downloading win 8. You need a detail or, I think, a upgrade product key.

  If you have a retail key to win 8 you can Win 8.1 free download here.

  I would like to delete the stuff you want via programs and features and then create acustom Refresh Image. Then, if you need to recover, use the IRC with no expansion of the seller. Create an image of Microsoft System or use third-party imaging software.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

  HP products:
  Retrograde 810-150se (Win 8.1) office in Win 7
  17 t - j000 Notebook (Win 8 upgraded to Win 8.1)
  H8 1380t CTO Office (Win 7)
  560z Desktop (Win 7)
  
  Other PC:
  Laptop Dell Inspiron (Win XP upgraded to Windows 7)

• Clean install of Windows 7 on Satellite L655

  I have a Satellite L655 and replace the HDD with a SSD (2 sheets) system (more small capacity, 1 partition). I also want to do a clean install of Windows 7.

  I'll be able to use the recovery disc for this? If so, will I have to reactivate? Thank you.

  > I'll be able to use the recovery disc for this? If so, will I have to reactivate? Thank you.

  What exactly do you want: clean windows installation or by using the disk Toshiba recover?

  I mean own installation only the Windows operating system using the Microsoft Win 7 disc.
  This installation requires a valid serial key.

  But using the Toshiba recovery disc requires no any key since the BONES of the window is already enabled on this drive.