New hard drive installed. Windows 7 disc need to install

Similar Questions

• How to install W7 on a new hard drive with an upgrade disc

  This issue was published and responded differently and I'm looking to help determine that I'm not just doing.

  I have a desktop dell Inspiron 540 initially installed with vista and upgraded to w7 with upgrade disk.  PC currently has a raid 0 on two drives configuration.  I want to do a clean install of w7 on a new 2 gig disk and remove my raid disk, so I unplugged my raid drives and plugged the new drive with the boot sequence set on DVD as priority to start.  When I put the drive of W7 the PC starts and begins installation of W7 and passes by a couple of reboots before it comes to rest on and the screen eventually white.  My questions are the following:

  (1) is the w7 stall out because it's only a upgrade disk.  I've read that even an upgrade disc must fill a system knowing that I finally needed to authenticate the license but this not yet get there.

  (2) or is the problem that none of the original pilot was loaded onto the new drive before trying to install w7?  I don't know if I have the disks just as the PC was rebuilt with new hardware warranty, so I don't know the Dell disks I have are no longer valid and if I install w7 without them.

  (3) if I do not have the right Dell driver disks is there a way to only install drivers without having to install as I prefer to do a clean vista w7 install.

  (4) when my pc normally starts in a raid 0 configuration and passes to the bios Setup screen, there will be an another intel matrix storage screen which is where I need to enter CTRL + I to enter the raid configuration...  After that I disconnected my original discs and installed a new this screen intel never presented itself - is that because I have not installed the drivers from dell?

  (5) others have suggested that I should keep the original discs in place for now, install my new hard drive, install W7 on the new drive and then delete older readers.  However, if I do and if Miss me the physical disks, if I remove the old drives, which allows W7 still starts it correctly once I deleted the old hard.

  THX,

  The disc itself is a full install of W7, it is key that defines as an upgrade and the normal solution to a blank disc is not enter key questioned at first, but to call the Activation Center later. That's because Windows 7 is a completely new system and use nothing of Vista/XP even if the upgrade should be complete.

  If the system restarts once again successfully during the installation, then it booted from the HARD disk as the installation tasks are all made from there. As JW suggests to test the HARD drive, most manufacturers offer on their website diagnostic utilities that are in the CD or bootable USB format then not dependent on the installed o/s. In addition, a contender is memeory questions, either swap autour, replace or reduce the system to a stick to eliminate the problems.

  Make sure RAID mode has been disabled in the BIOS for Windows 7 AHCI or SATA mode should work well when a single drive is equipped with RAID should disable auto. The keys Ctrl + I is a precursor of the o/s drivers so a function RAID BIOS Setup screen is not apply to it is not there. He disappeared because there is a single disc and you can't build a matrix on a single disc.

  All compatible motherboards in PC today have all the installation of Windows 7 no driver needed. They are normally added after the initial installation. If it's still a Dell Mobo, then the same driver drive should work as it will identify all required driver.

• How to get a product key, that I had a new hard drive installed in the computer shop and it seems that there is no key for windows 7

  Original title: window 7

  Hi can one tell me how to get a product key, that I had a new hard drive installed in the computer shop and it seems that there is no key for windows 7, I just brought Office 2016 and he did not finish the load down with the windows key 7.

  Because Windows 7 is in limited stock because Microsoft ended sales in October 2013, this created demand due to its rarity. This means the retail boxed copies request a bonus, while the OEM System Builder copies remain affordable.

  Full version (retail):

  -Includes the rights of transfer to another computer.

  -Does not require a qualifying earlier version of Windows.

  -Expensive

  Upgrade version (detail):

  -Includes the rights of transfer to another computer.

  -require a qualifying earlier version of Windows.

  -Expensive, but less expensive full version

  OEM System Builder version:

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  There is nothing wrong to use it too, especially that all future versions of Windows will be full versions.

  You can find software OEM System Builder of dozens of online merchants. The current price for OEM Windows 7 Professional Newegg, for example, is $ 140. When I checked a few minutes ago, Amazon offered packages OEM Windows 7 Professional from several vendors at prices ranging from $ 101 to $ 150. When I checked earlier, a package specifically designed for reconditioned PCs cost only $ 50 for a 64-bit copy.

  There is no technical limitation to prevent you from using OEM software on your computer, although this software only works for a clean install, not an upgrade. In the past, Microsoft has been remarkably inconsistent in his advice to clients on the question of whether this practice is allowed. (See "is allowed to use Windows OEM on your own PC? Don't ask Microsoft. »)

• Satellite P750 new HARD drive installed - what do we do now?

  Satellite P750 new hard drive installed as directed assistance of toshiba video suite of crush hard drive.
  What should we do now please help?

  Now you must install the Windows System.
  You have a Toshiba Recovery disk?
  Have you created one in the past?

  If you have this disc, insert the disc recovery and boot disk (press F12 and choose ODD as boot device)

  Then follow the instructions on the screen

• I got a new hard drive installed in my laptop. The difficulty to reconnect my printer.

  Recently, my computer crashed and I had to have a new hard drive installed.  When she came back to me I found that my printer to be connected to my laptop.  I tried to use the disc that I used when I purchased the printer.  But now, with this new hard drive, I need to connect to the printer to my laptop once again, and I have a problem that I can't fix it.  Please can someone explain what I need to do?

  Thank you.

  From Internet Explorer

  Original title: I got a new hard drive installed in my laptop. I need to reconnect my printer with my laptop - problems with this. Help, please.   

  Hi Jessie,.

  Unplug the printer first. Insert the Driver CD for the printer. install by clicking on Setup. continue when asked to connect the printer and connect the USB cable to the laptop. There is not any question...

• I recently had a new hard drive installed in my 2008 iMac. I'm trying to re - install office and the computer does not recognize my password. I tried all the passwords I can think of and nothing works and it wont let me continue

  I recently had a new hard drive installed in my 2008 iMac desktop computer, because right now I can't afford a new computer.   I am now under OS X El Capitan 10.11.4 and my password no longer works so that I can reinstall office microsoft for Mac.  I'm trying to change my password, but you must enter the old password and it does not recognize the password.  I tried every password I use and nothing works.  How can I change or get a new password?

  Reset the password.

  OS X 10.7 Lion, Mountain Lion, Yosemite 10.9 10.8, Yosemite 10.10 and 10.11 El Capitan

  Shut down the computer.

  Start the computer, and then press on and hold the command key and the R key to boot from the recovery partition.

  When you see the Apple logo, release the keys.

  Wait until the OS X Utilities window appears.

  Move the mouse pointer to the bar menu at the top of the screen, click on "Utilities" and select "Terminal".

  in the menu dropdown.

  Terminal window is displayed.

  TypeRegeditdans resetpassword and press enter on the keyboard.

  Reset Password Utility window will open.

  Leaving the Terminal.

  Select Macintosh HD, if not already.

  Select the user account in the menu popup box under "Select user account.

  Enter a new password.

  Re-enter the new password for the user.

  Enter a hint.

  Click on the Save"" button.

  Click  in the menu bar, and then select restart.

  Open a session.

  When Keychain dialog box appears, select "create new keychain".

• I just had a new hard drive installed (with XP), and no matter where I set the resolution, everything seems to be stretched horizontally

  I just had a new hard drive installed with XP, and no matter what I set the resolution to, everything now looks stretched horizontally.  I don't have this problem with the old hard drive containing XP

  If you did a clean installation of XP, then you must install the hardware drivers for your components. Go to the website of the manufacturer of your PC, then download and install the latest Windows XP drivers for your model.

  SC Tom

• I had to get a new hard drive installed on my computer dI had to get a new hard drive installed on my computer, how do I reinstall Creative Cloud? o I have reinstall creative cloud?

  I had to get a new hard drive installed on my computer how can I reinstall the creative cloud?  Do I first have to use the trial version?

  Hi Robin,

  Please refer to the help documents below to download the application Adobe CC:

  Creative cloud to desktop

  Download, install, update or uninstall applications

  Kind regards

  Sheena

• New hard drive gets the INVALID disc Windows 7 64 bit upgrade product key!

  I installed Windows 7 Home Premium and within 24 hours, my hard drive is dead. I replaced the hard drive and reinstalling Windows 7 Home Premium with 64-bit disc. Everything went well until the time of the entry of the product key. When I typed in the key of this program returned an INVALID KEY message and instructed me to check and retype the key, I did. Product key message invalid was repeated. I have not installed a previous version of windows before you reinstall 7, and the installation program never asked me to check my right to use the upgraded version (Yes, I used the CUSTOM install method).

  The INVALID PRODUCT KEY message due to the absence of an earlier version of windows is detected on the new hard drive? I need to install my OLD version of windows before proceeding with Windows 7, can I? Please help me understand what is happening with this PC. I convinced my sister to be upgraded because Windows 7 is SO much in my PC, so that she bought the upgrade disc and tried for a week to get its system works as well as mine has inlaw for several months. I have not heard of someone having this much trouble with the upgrade to Windows 7.

  Product keys don't care equipment. They only care about the version of Windows that you are trying to install. (However, you cannot validate a facility later but this is another topic).

  If your product key is rejected, then you are two typing errors or you are using a key that does not match the DVD that you are using. This could happen if you use a MS Office key for a Windows installation to a key of Windows 7 OEM for a DVD retail of Windows 7.

• New hard drive, installed Windows XP PRO version 2002 - resolution screen and internet problems

  My Dell has had some problems (patially due to age), so a buddy of mine and I put a new hard drive in it and then installed windows XP Pro.  Installation went great, but now that it's installed, I can not get the screen resoultion to change and I can't connect to the internet.  I feel like with the internet, can I have a driver problem.  I know that the internet works, I'm on it with the laptop right now.  Any suggestions?

  ????  I'm not sure I understand your question. You download the drivers to a place, you will find them, as the office. If you want to put them on a USB stick, copy the files downloaded to the key and take it to the computer target. Copy the files on the computer desktop. Double-click on a file and it will unpack the installation routine starts. Follow the installation wizard. Reset when said to repeat as needed until all the drivers, etc are installed. Subsequently, you can delete the downloaded files from Dell (from installation .exe). MS - MVP - Elephant Boy computers - don't panic!

• Having trouble installing new drivers after installing a new hard drive and Windows Vista.

  I just installed a new hard drive on my computer of dell inspiron 1525. I managed to do it and it worked. I had a disc from dell to reinstall windows vista edition Home premium 32-bit and had drivers and utilities dvd. However I couldn't connect to the internet. I understand I'm missing some drivers but I rebooted the computer, but it goes to the black screen asking you to start in safe mode, safe mode with network, normally and something else. But after trying all of them, it goes straight to this same screen. What can I do? Or I can clear the new hard drive and start over? Any ideas?

  original title: new installation from hard drive problem

  Hello

  I suggest that you run the Startup Repair tool and check if it solves the problem:

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  I suggest Download driver network card on another computer, and then transfer the file using any flash drive and even install in the computer you have challenged.

• New HARD drive installed. Where can I get Vista installation disc?

  Laptop of my son DV6404CA hard drive needs to be replaced. I ran the test HHD and it failed. My question is since the laptop never came with an installation disk, how to get windows Vista reinstalled on the new HARD drive.

  Thank you. The f

  Hey there! You must contact the Hp Support (1-800-HP-INVENT) and order a set of recovery disks. They run usually about $30.

• Desktop HP Pavilion p6-2123: New Hard drive with Windows 7 but cannot get online... need adapter... network error 0 x code 80070017

  I installed a new hard drive and clean installed Windows 7 from a dvd, so I could then install Windows 10 from a record since the upgrade on my pc failed repeatedly.

  After I installed 7, everything worked except that I can't go online. I get error code 0 x 80070017 that tells me to install a network adapter or reinstall a driver. My internet connection in our House work that my husband is able to get online. We have Verizon DSL internet via a network cable.

  My husband downloaded the necessary driver for my pc to a website of HP flash drive, but it Wouln't install/run on my pc.

  Thank you for your help.

  At any time.

  I am pleased to have been of assistance.

  If you still have problems with the flash player and this file, the only other suggestion I can offer would be to burn the file to a CD and run the executable file I've first validated from the CD or transfer the 2nd file I posted from the CD to the hard drive, or find the driver on the CD folder.

• HP Probook 4520 s installed new hard drive with Windows 7 pro x 64 and drivers - very lag

  Hello

  I had my HP Probook 4520 s for 5 years and a few months ago, he started to become very lag, especially when you use the internet, streaming video and games.

  I thought I had identified the problem as a bad sector on the hard drive and so I bought a new hard drive and upgraded the RAM from 4 GB to 8 GB at the same time.

  When I installed the new hard drive, I couldn't burn an image of my old hard drive (it would stop during the process and was unable to do so because of an error). I used my little HP Windows 7 Pro x 64 operating system DVD and your HP Application and Driver Recovery DVD to install the necessary drivers on my replacement new drive.

  The RAM and the new hard drive seem to be good, however, it's more lag. I tried to use latancy monitors to see if the drivers are the issue. It seems that there is a huge amount of latancy and my CPU is at an almost constant usuage of 100%.

  LatancyMon points in the following drivers: usbport.sys, tcip.sys, acpi.sys, iastor.sys, ndis.sys, dxgkrnl.sys and so on.

  I've seen forums where they will guide you step by step how to determine what drivers are causing latancy. This I could do although he always seems to change drivers who are the cause of the problem and there seems to be a lot of pilots of causing this problem it is so difficult to bring out here that one. In addition, there seems to be no solution to these problems. The only one offered is to update the offending drivers. This does not solve the problem with lag and the latancy yet.

  Any ideas?

  P.s. I really don't know not what is the underlying issue is here so I don't know if this is the right forum to post in. Drivers may not at all be the issue, I spent the last four weeks trying to solve this problem.

  Hello skinandbones13

  Thanks for posting on the HP Forums!

  I understand that you have a problem with your laptop. However, since it is a commercial laptop, you should post your question on the map cell of the HP Enterprise Forums for a better answer.

  Have a wonderful day!

  Mario

• Can I install unused Windows 7 on my new hard drive with Windows 8?

  SO to make a long story short I let my friend borrow a laptop computer and in some SORT he wiped the BONE. I have a HP Pavilion g7 and it is running windows 8. I called HP and after 45 minutes they told me they could send me a new hard drive and a 8 windows recovery disk. I already have an unused copy of windows 7. My question is can I install windows 7 on it and forget just about 8. (Yes, I'm one of those people) but it's so much easier for me to use. but theoretically, since I do not have an operating system on the hard drive I should be able to right? Thanks in advance!

  Original title: Windows 8 for windows 7

  Check the HP website first to ensure Windows 7 drivers are available for this laptop model. So here, there should be no problem with installation of Windows 7.

  Like to do a clean install with Windows 7, please see the following instructions:

  Clean Install with an upgrade Version Windows 7 - Windows 7 help Forum

• My hard drive died. A new hard drive has Windows 7 preloaded?

  Hello world

  I have a laptop HP G62-225DX with Windows 7. My hard drive died. I think to buy a new one. A new hard drive for HP already installed Windows 7, or I have to buy Windows again?

  Hello

  A new HARD drive will have no operating system - you'll need to use your set of recovery disks to install Windows 7 on disk.  The procedure is detailed in the document of HP here.

  If not create you these discs or have lost them, you can order a replacement set using the link below - the cost varies a bit depending on where in the world you live, but they are generally inexpensive.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K