Install the Windows own 8.1 to want Phoenix 810-230qe?

Similar Questions

• Windows will work not day after I installed the windows updates.

  The next day, I installed the Windows updates, I turned on my laptop a short Vaio splash screen is displayed and a black screen comes up saying that "Windows couldn't start. A recent hardware or software change might be the cause. "I don't have the installation disc of Windows that it suggests to use the software is preinstalled.  The safe mode and last known good configuration and the start windows normally get Windows running.  It is simply scrolls a list of code and ends with a line crcdisk.sys, goes to a blue screen for less than a second, then goes to black screen.  All the help I could get to address this issue would be greatly appreciated.

   

  If Safe Mode doesn't work no and you don't have a Vista DVD from Microsoft, do a repair disc to do a startup repair or a system restore:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  http://eSupport.Sony.com/Perl/select-System.pl?PRODTYPE=1, 24,26,66,9,70,5,72

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  See you soon.

  Mick Murphy - Microsoft partner

• I installed the new Skype and now she wants money, what's happening

  Installed the new Skype and now he wants the money, it won't make a video call

  You should ask them to provide you with their Skype name. Using this Skype name you must add them to your contacts list.

  https://support.Skype.com/en/FAQ/FA3281/how-do-i-find-my-friends-and-add-them-as-contacts

• I use 1023TX dm4, and I install the windows 8, it have problem ATI display driver

  I use 1023TX dm4, and I install the windows 8, there is an ATI driver problem, I have two screen, one intel, and one is ATI. but ati driver does not, I need to turn off, can you help me?

  Hi Tomiko094,
  
  More than likely HP won't to material support for W8 on any system purchased before October 1, 2011. Most of the W7 drivers will work W8.
  
  Have a look here http://goo.gl/hmPRB for a document official on the update of drivers and software
  
  This document here http://goo.gl/CO6uV provides information on the upgrade to Windows 8
  
  I hope this helps.

• Cannot install the Windows Fax Service

  I used to have a FAX in Control Panel > printers and Faxes screen, but I no longer. I went to control panel > Add/Remove programs/add Windows components and some Fax Services. The installation process starts and a Fax icon appears on the screen with my other printers. Until the installation finished, however, this fax icon disappears.

  I check start > all programs > Accessories > communications > Fax but the menu drop-down should be, he's not here, and the box says just (blank).

  I recently installed a new Canon printer that has the ability to "Fax From a Computer" that allows me to send faxes directly from a document using the modem in the PC. I think the only action of the Canon printer is made that a fax has been sent.

  After I installed the Canon printer I got a Canon Fax icon both Windows Fax icon, but I had a problem of phone and none of them worked. I have fixed the problem of telephony and the works of Canon Fax function in the computer, but I get the problem described above, when you try to install the Windows Fax.

  Is there something that prevents the addition of a second Windows fax service?

  How to go beyond this issue and allow multi-touch Fax from Windows?

  We consider that you have Windows XP with service pack 3 installed some variety.  If this is not correct, explain what version of Windows you have.

  What was the 'problem of telephony' and what did you do to fix?

  Open the Services applet (start > run > services.msc > OK) and make sure that each of the following is running and has shown startup type

  Fax (auto start)
  Print spooler (Autostart)
  Telephony (manual start)

• How to install the windows installer?

  How to install the windows installer? I can't install Java because it tells me that I have to install windows install.

  You can download and install Windows Installer from HERE. However, I doubt that this is your problem. Give it a go well and we'll go from there.

• How to install the Windows Firewall?

  Original title: firewall of Windows XP.

  How to install the Windows Firewall?

  Hi LKayPeterson,

  Windows Firewall is a firewall integrated, based on the host, with State included in Windows.

  You can follow this link to activate the Windows Firewall:

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?

  Reference: Windows Firewall

  Hope the helps of information.

• Install the window manager

  How to open or install the window manager.

  How to open or install the window manager.

  There is no program that I know of called Manager of windows. Be more specific about what you ask. Task Manager? Device Manager? Something else?

• Cannot access the network after you have installed the Windows updates

  original title: Windows update and Acer Aspire M3201

  Hi, I have a problem with my Acer Aspire M3201, which has Windows Vista on it. The system has installed the Windows Update automatically, so I can't access the internet and home network more. So I restored the previous update windows, then I can get into the internet again. A week later the update windows again but this time somehow corrupted previous restoration, I cannot restore and can not enter in the internet. I bought Windows 7 to upgrade my Windows Vista computer. The upgrade went OK game, but it was also installed the updateautomatically, and I cannot yet access the internet web browser of screws, but the command, I can ping any web site as www.cisco.com. Please help me. Thank you.

  If you updated that could trigger it, you can do is to uninstall and avoid installing it by hiding the update in Windows Update.

  Click Start, type: see installed updates
  Press enter on your keyboard
  Look for the update in question, no it click on, then click on uninstall.

  Restart your computer

  Open Windows Update, select the update, right-click and click Hide

  See also: Troubleshoot network Windows 7 http://clkon.us/bJtkA0

• How to install the Windows Vista equation editor? The program is already installed?

  How to install the Windows Vista equation editor?  The program is already installed?

  http://en.Wikipedia.org/wiki/Microsoft_Equation_Editor

  'Equation editor was developed by Design Science and is included in all versions of Microsoft Office'

  Read the above info.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Office:

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

   

  Theywill help you with your office questions when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• I have the product key, but I have win 7 ISO to re - install the window

  Original title: win 7 ISO for zero laptop refurbishment

  I have the product key, but I have win 7 ISO to re - install the window. Please help?

  Laptop: FUJITSU

  Mode: Windows 7 home Prem OA

  Consult the manual (paper or electronic version on your computer). You can have a hidden partition. You could also have a way to make a copy of new installation media. Otherwise contact Fujitsu.

  https://www.Fujitsu.com/global/support/products/software/manual/

• Install the windows service could not be accessed. message when installing printer

  Separated from this thread.

  I try to get to download my printer software and everything that appears is;

  Install the windows service could not be accessed.

  This can happen if windows install is not properly installed.

  Contact your support team.

  I don't understand what it tells me. If anyone can help?

  Hello, Ruth.

  What version of Windows are you using?  Windows Vista, 7, 8/8.1?

  Printer is PhotoSmart printer?

  Try the steps listed in this Document that follows.

  Error "Could access the Windows Installer Service" when you try to install a program in Windows 7 or Windows Vista

  https://support.Microsoft.com/en-us/KB/2642495

• Cannot install the Windows SDK

  I try to install the Windows SDK for Windows 7 with .NET Framework 4 on a DVD.  Installation takes place in short a while then Setup stops and inflicts a cleanup at the.  I get a window "Installation Failed" with a message telling me to "refer to Samples\Setup\HTML\ConfigDetails.htm document for more information."  However, the cleaning process removes this document so it is impossible for me to see.  I saved the log file "SDKSetup_7.0.6918.0.log" but it's over a length of 1000 rows.  I'll be happy to send it to you if you wish!  I have made several attempts to install from the DVD I burned the ISO file downloaded and on the web.  I get the same result every time.  What do you suggest me?

  I found through research more than others have discovered that the SDK will not install anything it either if it finds a later version of the redistributable C running pre-installed libraries.  I had to uninstall the C libraries, then install the SDK and then do a MS update to get the latest patches for the runtime libraries.  Frankly, it seems pretty stupid to me.  At the very least, the installation should give a comprehensible message on why it would not be installed.

  -mbmark

• I try to install the windows easy transfer and I get the error.

  I try to install the windows easy transfer and I get the error, "the version of windows you have installed does not match the update you are trying to install.  I download and install the 32 and 64-bit version for XP.  I also downloaded and tried both 32 and 64-bit version for windows 7.

  On which version of Windows 7 you are trying to install Easy Transfer?  Easy transfer seems to be automatically installed on Windows 7. You run Easy Transfer on Windows 7 to 'prepare' the copy, you need to be running on the 'old' PC.

• How to recover my product key of windows 8, I installed the windows 10 techniques view without taking backup I need to go back to my windows 8 pls someone help

  How to recover my product key of windows 8, I installed the windows 10 techniques view without taking backup I need to go back to my windows 8 pls someone help

  Hi Carmen,.

  Thanks for posting your query in Microsoft Community Forum.

  I understand that you had not taken any prior backup upgrade to Windows 10 Technical Preview and need product key to retrieve Windows 8.

  So, first of all, I suggest you to check the product key in email messages when you purchased the license to the product for Windows 8. Once you get the product key, you can create a Windows 8 ISO and reinstall using this product key. See the following article:

  To create installation media Windows 8.1

  However, if you had bought the system pre-installed with Windows 8. Then, you may need to contact the Original Equipment Manufacturer (OEM) system for Windows 8 discs to restore the older operating system.

  Hope this information is useful. Let us know the results for further assistance, we will be happy to help you.