Install Acrobat SDK of portfolio and plugins in your Flash Builder programming environment

Similar Questions

• I installed acrobat reader in window10 and demoted to the 8.1 window. After downgeading 8.1, acrobat reader does not run and also do not uninstall and reinstall. Only, I get the error message. What should I do?

  I installed acrobat reader in window10 and demoted to the 8.1 window. After downgeading 8.1, acrobat reader does not run and also do not uninstall and reinstall. Only, I get the error message. What should I do?

  Hi soyoungl9536964,

  Please try to run the cleanup tool "Download Adobe Reader and Acrobat tool - Adobe Labs" on your machine to remove all traces of the reader.

  Then, restart your machine and install the latest version of the player from here:

  Adobe Acrobat Reader DC install for all versions

  Let me know if any problem will persist.

  Kind regards

  Christian

• I'm trying to install acrobat pro for mac and his gets 53% then fails saying unexpected error - ideas

  I try to install acrobat pro for mac and his gets 53% then fails saying unexpected error - I had unfortunately just binned my rather correct uninstallation cs5.5 - I use the last El capitan - any ideas

  Hi helenc44553207,

  Please check system requirements system requirements | Master Collection before installing the application.

  Uninstall CS using this cleanup tool use the Adobe Creative Cloud cleaning tool to solve installation problems, restart your Mac & reinstall it using this link Download CS5.5 products.

  Let me know how it goes.

  Kind regards
  Nicos

• Can I install Acrobat DC on desktop and tablet pc

  Can I install Acrobat DC on desktop and tablet pc?

  Yes, you can download it on the desktop and for your tablet to refer to the link below.

  FREQUENTLY ASKED QUESTIONS | Acrobat DC mobile app

  Concerning

  Megha Rawat

• Installed InDesign free 30 trial but realized that it wasn't the app required so I cancelled. Now try installing Acrobat X 1 Pro and can not go beyond the "Please close the following applications to continue:-SafariNotification' and the button to learn mo

  Today, I signed into Adobe Creative Cloud and installed free 30 days than indesign test but it was not the app required so I cancelled. I am now trying to install Acrobat X 1 Pro and cannot go beyond a box stating "Please close the following applications to continue:-Safari and - SafariNotificati 'n' help not the button read more." I can connect on Safari and I checked my email address but when I press retry the box back again! Any ideas, anyone please?

  Please see

  https://helpx.Adobe.com/Acrobat/KB/install-prompt-close-safarinotificati.html

• I want to install Acrobat Standard DC 2015 on a local computer.  A program needs to use reference the local installation files.  The STD Acrobat DC installed locally?

  I want to install Acrobat Standard DC 2015 on a local computer.  A program needs to use reference the local installation files.  The STD Acrobat DC installed locally?

  Yes.

  RonB

• ENT - install Acrobat DC cloud creation and activation?

  I try to install Acrobat DC via a package created Creative packer of cloud and it always eithers closes automatically after 30 seconds or guests for the user to log into the Cloud Creative account. I can't to activate with the ENT key? I created a package with only Acrobat DC since he has the number ExceptionDeployer. I'm also not sure what as commands to run?

  Acrobat XI was:

  ExceptionDeployer - workflow = install - mode = pre - installLanguage = en_US

  Build\Setup

  Acrobat CC is:

  Build\Setup

  ExceptionDeployer - workflow = install - mode = post

  Is this good? I can't find any good documentation on CPC and Acrobat DC, if there is some please let me know.

  I also have only one user, which seems to be stuck in limbo, because she accidentally installed trial version of cloud creative app. I ran the clean normal Acrobat and I tried uninstall and then reinstall and not matter what it asks for the connection or closes automatically after 30 seconds.

  Any help is very appreciated. Where it's important, it's about Windows 7 SP1 x 64. All other CC 2015 apps work perfectly well.

  Thank you.

  Brian,

  I agree. Changes for 2015 of CC and Acrobat DC are not clearly documented. With the help of support, it's how I work in the construction of a CC package with other applications. I think this would work as well without having to install anything else:

  REM This is the actual installation of Acrobat

  start/wait Exceptions\APRO15.0en_US\"Adobe Acrobat"\Setup.exe /rs /sPB /msi EULA_ACCEPT = YES TRANSFORMS="Exceptions\APRO15.0en_US\[our-custom-settings].mst"

  start/wait msiexec.exe /i "Build\ [our-CC-package] .msi" /qb

  The next step of REM serializes just

  start/wait Exceptions\ExceptionDeployer.exe - workflow = install - mode = post

  The trick is to run the Acrobat Setup.exe and then follow up with the msi to set licensing. It may not be perfect, but it worked for our people.

  We also use a standalone install Acrobat DC it's under a different license. For this, I use the Acrobat customization tool to preload the license key and turn off the prompt for registration. For this, I simply run msiexec /i and point to the files in custom transformations.

  Hope this help (and hope that adobe improves its DC documentation soon).

• Can I install acrobat on my desktop and laptops?

  I think that I contacted Adobe support earlier and they said I could install Acrobat X Pro on my desktop and laptop. I just got a new laptop to replace my old (dead). When I installed Acrobat on the laptop, it is automatically removed from my laptop. Any info available?

  You are allowed to have facilities that can be used on both machines.  It is unclear what your question is about also.  If your question remains unanswered it specify and indicate which version of Acrobat you are talking about.

  Applications are not normally removed from any machine after installation on another, the dead in particular.

  If it is a cloud subscription, the subscription might be automatically interrupted for a machine if you enable it on a third computer, but the software is still installed.

  If you have a version of serial number activated, you need to disable on a single machine (of two facilities enabled) before you can activate another installation on a third computer.

• Strobe Media Player broke after assets.swc of compilation and compilation project in Flash Builder

  I use CS5.5 - Flash Builder 4.5 and Flash Professional 11.5.1.349.  If I import a new Strobe Media Player 1.6.328 project into Flash Builder and compile, it works as expected and the StrobeMediaPlayback.html page load in my browser and behaves normally.

  Then I load assets.fla into Flash Professional and don't edit and publish a new assets.swc.  Then I go back to Flash Builder and refresh the StrobeMediaPlayback project and recompile.  This time when StrobeMediaPlayback.html loads in the browser, the SWF Strobe is instantiated on the page but is not executed, i.e. no play button and no bar scrub down, just a black box.  The black box right button brings up the Flash menu so the SWF load has it but stopped somewhere running.

  I try to get the debugger working in Flash Builder, but so far without success.

  I hope that someone has seen this before and has some ideas.

  Kind regards

  Tim

  The problem was simply to fonts.  Fonts in StrobeMediaPlayback/assets/fonts must be installed in the operating system.  In my case Windows so just right button on the font file and select install.

• Extension for CS 5, 6 and versions CC in Flash Builder 4.6 fails to initialize

  Hi all

  I develop an extension for Illustrator CS5, 6 and CC versions. I use the versions of Flash Builder 4.6 and Extension Builder 2.1. When I create a new project and add a minimal support for CS5, I am unable to view the design of the project resulting. I don't understand why. If I add a minimal help for CS6, design mode works very well. What is behavior?

  Also, I expect to use datagrid spark in my extension, it supports smooth scrolling. I'm not able to do the same, as the extension never initializes.

  Here's the screeshot of the compiler settings:

  

  And here's what I get the error:

  

  What can I do to make my work?

  Hello

  Unfortunately, the Design view is completely unusable with the Extension Builder 3.4 needed to create a CS5 extension... So, you will see a black screen instead of your user interface. The only solution is to write your code and test. Previous versions of Extension Builder working on a previous version of Flash Builder and Design mode worked as expected...

  Best,

  Luca

• How to install Acrobat Pro XI (Mac and Windows) with serial number embedded?

  We have concurrent licenses for Adobe Acrobat Pro.

  XI Pro is now available on the website of license, so I downloaded the installer and serial number.

  However, running Setup XI requires to enter a serial number during the installation (at least on the Mac setup - I did not setup Windows again...)

  Is there a way to incorporate the serial number into the Installer (or push a file via ARD, which has the serial number inside) so that I don't have to distribute the serial number of my end-users for installation?

  Thank you!

  Please use the for Mac Adobe Customization Wizard. Here is the link to download: ftp://ftp.adobe.com/pub/adobe/acrobat/mac/11.x/11.0.00/misc/

  With this, you can serialize the Acrobat installer.

  Kind regards

  Deepak

• I just installed Acrobat Pro XI.  When I went to start the program asked me for a serial number, which I have, but the menu drop-down did not include Pro XI and gave me an error message

  I can't not far as this screen because the serial number does not match any product on the menu drop down.

  Apparently, it sounds as if you have purchased an upgrade, which if so would have been a mistake. Of course, if this is not the case, check received. If still not sure please tell us price paid.

• Cannot install updates kb982168, kb2756918, kb2789643 and now the updates for other programs say there is an error (fail), (as the turbo tax)

  This has happened after that the volume of messages C is dirty, rebooted now what is happening

  I would recommend that you manually download the update from the Microsoft Download Center. Search the Download Center for the KB number or download your update from the following links:
  MS13-004: Description of the update of security for .NET Framework 3.0 Service Pack 2 on Windows XP and Windows Server 2003: 8 January 2013 (KB2756918)
  MS13-015: Description of the update of security for .NET Framework 2.0 Service Pack 2 on Windows XP and Windows Server 2003: 12 February 2013 (KB2789643)
  Description of the update rollup for the .NET Framework 3.5 Service Pack 1 on Windows XP and Windows Server 2003 (976765, 980773 and 976769): June 8, 2010 (KB982168)
  Once you have the downloaded update file, run the executable with administrator privileges to avoid any permission to hiccup.
  Recommended if you can't always install the update, the next steps are to reset the Windows Update components or an update of the file downloaded a new attempt after performing a clean boot or boot without failure. A clean boot or Mode environment safe is important to ensure that there are no other programs that may be locking files or otherwise interfere with the upgrade process.

  How to reset the Windows Update components?

  How to configure Windows XP to start in a "clean boot" State

  Start your computer in safe mode

• Is it possible to install InDesign on a server and run from your desktop?

  I have installed InDesign on a server, created a share and gave access to this folder. Created a shortcut on my desktop and ran InDesign.

  I get a message saying:

  "Adobe Application Manager, need to check your missing or damaged license."

  Installation it does not help.

  Anyone have any idea on how to do it?

  This is not a supported configuration. InDesign MUST be installed locally.

• fast and standard package in Flash builder

  In my IOS project, I need to load some SWF files.when I debug in IPad, if I use the fast package, all right, but if I use the standard package, my program doesn't work normally, a load of cann't SWF correctly, it allways monostable #1107 and #1065 errors, why? Can someone help me?

  Standard packing compiles your application code and the AIR runtime down in native ARM instructions.

  Quick packaging includes AIR runtime in the IPA file and interprets the code of your application.

  (This video may be useful: http://gregsramblings.com/2011/06/13/video-interview-with-scott-petersen-about-how-ios-pac packaging factory /)

  Because Apple does not interpret the code in iOS applications, you cannot use fast packaging for something that you submit to the Apple App Store.  Loading an external SWF when running is not something that is permitted by the Apple restrictions.