INSTALL ANOTHER PRINTER

Similar Questions

• LOST MY HP PHOTOSMART INSTALLATION SOFTWARE, HOW CAN I INSTALL THE PRINTER IN ANOTHER MAC?

  Hello

  I ALREADY HAVE A PRINTER OF HP PHOTOSMART MORE, BUT I LOST MY CD FOR INSTALLING SOFTWARE. I JUST ACCUIRED A DIFFERENT MAC AND I WANT TO INSTALL THE PRINTER ON THIS COMPUTER.

  WHAT CAN I DO TO INSTALL IT?

  Kind regards

  JAIME

  Hi Jaime,

  What you can do is to go on the media and the area of drivers from the Hp site by following the link http://www8.hp.com/us/en/support-drivers.html

  -Just type in the Version of the Photosmart you have and who follow a Version of MAC OS that you use

  -you want to do from the computer that you are wanting to install the printer on.

  Just download the driver and install and that should help you to get this printer set up on this computer as if it was the drive itself

• cannot re - installing the printer driver deskjet 920 HP computer Vistas (inadvertently, removed by mistake)

  When cleaning a Windows Vista laptop, I uninstalled the print driver for the HP Deskjet 920 because I thought it was for a different printer is no longer used.  Usually, you can just download a driver from the HP website; Apparently, this was included in the software for the computer when it was purchased and cannot be downloaded.  There is no way to re - install or I'll simply use another printer?

  Try to download the Deskjet 990c driver.

  (Shane_R) has a great post on how to do it.

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers-e-g-Windows-8/How-to-assign-alternate-print-drivers-in-different-versions/TD-p/1957011

  I would like to know if it works.

• Impossible to install a printer over a network; requires a driver must be installed.

  Recently I got problem with my printer, so I removed and have reinstalled the software. The printer is now works great on the host computer network.

  I have a home network and I want to share a computer, I already checked the box on the properties of the printer for printer sharing. I wanted to add my printer to another computer through the network from my computer, but it would not allow me. I tried to change the permission settings, but it doesn't are not all the parameters or tabs in printer properties that allow me to change anything either, so I went straight to the other computer and he DID I would add a computer on the network, but after I selected the printer to add and clicked on OK another message appeared and he said that my computer does not have the correct driver. INF installed and he asked me to look it up.

  I'm stuck because since this is a computer on the network and not the host computer that can have the file, I don't know how to access my computer through another computer on the network, and I do not know which file is in application or how to find it.

  * Thanks in advance for reading and using, any idea, advice and assistance are greatly appreciated! :)

  Host Info:

  Windows XP Media Center Edition 2005 SP2

  Computer info network (one that I am trying to install the printer on):

  Windows XP Home Edition SP2

  News of the printer:

  HP Photosmart C4180 all-in-one

  I go to the HP website and just download the right driver from there.  It will probably be the simplest solution.

  -B-
  http://www.officeforlawyers.com | http://www.OneNote-tips.com
  Author: Guide to counsel for Microsoft Outlook

• Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  The duplicate thread information:

  Cannot connect Epson scanner/Nikon camera to printer!

  Hi Carolyn has Culp,

  
  Thanks for asking this question to Microsoft Community!
  
  I understand that your scanner and Nikon camera is not getting recognized in windows vista.

  He would be grateful if you could answer these questions. This will help us to a better way to get a resolution of the issue.
  1. have you made changes on the computer before this problem?
  2. What is the brand and model of the scanner?
  3. are you an error message or error code?
  4. is that your other USB devices work?
  I would suggest trying the following methods and check if it helps.

  Method 1:
  

  Try connecting to another USB port and check if the camera is detected or try to plug the camera on another computer.
  Method 2:
   
  Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us
  Method 3:
   
  Remove and reinstall all USB controllers.
  To remove and reinstall all USB controllers, follow these steps:
  (a) click Start, run, type sysdm.cpl in the Open box, and then click OK.
  (b) click on the Hardware tab.
  (c) click the Device Manager button.
  (d) expand Bus USB controllers.
  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (f) restart the computer and reinstall the USB controllers.
  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
  
  Method 4:
  To update the chipset drivers and check if it helps.
  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
  
  Reference:
  The problems of scanning: http://windows.microsoft.com/is-IS/windows-vista/Troubleshoot-scanning-problems

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• HP2540 all-in-one: how to install a printer without the use of the Internet

  I want to install this printer on another computer and is not able to connect to the internet. How can I finish the instalation.

  NH

  Hello

  If you can download the driver on a computer that has internet access, you can transfer the file to the other computer using a USB key.

• drive hard printer - I inserted the disc to install the printer software, but my PC cannot read

  Installed a printer but when I inserted the disc that comes with it, my pc can not read.

  Hello

  ·         The computer will read other discs?

  Try to insert another disk and check if the problem persists.

  I suggest you run the Microsoft Fix tool of the web link that will help automatically detecting and fixing common problems below.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

  See also the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope the helps of information. Please post back and we do know.

• Cannot install the printer on the laptop

  Point question:

  Product name: HP Photosmart e-all-in-one printer-D110a

  Model name: CN731A

  Portable printer is installed:

  Operating system: Windows 07-34 bits

  Brand: Dell

  I'm unable to install my photosmart D110a printer.  Previously, I have installed the printer on another laptop. I changed computers, now that the drive won't allow me to install fully on this new computer.  It allowed me to install and simply use the printer section, but not the scanner or copy option.  I uninstalled the printer now, it won't even install it partially.  I really need to use my printer.

  Restart your PC.

  Choose it "Full Feature" software for your printer from here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-80511-1&cc=us&dlc=en&lc=en&os=4062&product=4023246&sw_lang= "

• LaserJet P3010: Cannot install the printer. The print processor does not exist

  I have a LaserJet P3010 Series PCL 6. It gives me the following error when I try and add it to our print server: "unable to install the printer. The print processor does not exist. "Regardless of what kind of IP config I use, the test page I always manually print has 0.0.0.0 for everything, even with the manual entry of IP. It is brand new, fresh out of the box, and I installed a few of them before. There seems to be 2 sets of link one of them lights flashes green (even without a CAT cable) and the other shows not all colors. (I think that's the main, judging by its location). I know that the cable is good, but also over all cable infrastructure. Should I have a defective printer? Or did I miss something...

  Problem solved. Use another port.

• "The selected printer is not available or has not been properly. Check your printer or try to select another printer.

  Hello.

  I recently got a new computer. I have installed the printer software and it successfully print a test page. He will appear in devices and printers. Device Manager says it's working properly. However, it will not print anything else. No PDF no Word document, no web pages. Right now I get the error message that I put in the subject of the message, on a gray page. I turned it works again, I removed and put the cables. I don't know what else to do. Anyone know what is happening here?

  The convenience store has found nothing wrong.

  I reinstalled the printer software.

  Once again, the error message is; "The selected printer is not available or has not been properly. Check your printer or try to select another printer.

  Thanks in advance.

  For troubleshooting, please follow the links with the steps below.

  Click on the link below to fix common printer problems:

  Solve printer problems

  Follow the steps below on how to print attachments in Outlook 2010:

  Print attachments received in e-mail messages. Outlook 2010

  Follow the steps indicated by the ZigZag3143 (MS - MVP) on this link:

  Print from Outlook.com

  Follow the steps below on how to erase and reset the printer spooler:

  Clear Printer Spooler queues and activate the Spooler Service Print spooler is the main component of the printing interface. The print spooler is an executable file that manages the printing process. Print management is to retrieve the location of the correct printer driver, load the driver, queue function calls high level in a test of the work, schedule the print job for printing and so on. The spooler is loaded at system startup and continues to run until the operating system is shut down.

  Keep us updated.

• Try to install the printer HP laserjet 1012

  I just got a new computer with windows 7.  I tried to install my printer HP laserjet printer HP laserjet 1012.  I have the installation disc, but it does not work and the HP site does not list the drivers for this printer.  I'm out of luck, or there at - it a way to install this printer.  t works fine on windows XP

  Users have reported that the Laserjet 1015 driver will work for 32-bit systems with the LJ 1012.  In another forum users reported using the Laserjet 3055 PCL5 the 1012 Laserjet driver in x 64 systems.

• Cannot install the printer. The print processor does not exist.

  Windows 7 Enterprise 64 bit.  I am able to install HP LaserJet printers but no virtual printer.  I can not load the XPS from Windows printer or Print to OneNote.  I also tried to load more than one PDF printer and none of them work.  The error I keep gettig to "cannot install the printer.  The print processor does not exist. »

  Any ideas would be appreciated.

  My laptop has been reloaded from a picture, and I was not able to start the print spooler at all. I have studied the issue and cleaned files and registry entries and was able to print on real printers, but not virtual. That's when I asked the question.

  Finished reimage the computer again, and once again, I could not start the print service. We discovered that the image that the laptop was built from was actually a VMWare virtual machine, so we started to look in that direction.   We had to delete the following entry in the registry and rebooting, how the print spooler began to work very well.

  [Print HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\ThinPrint for VMWare Port Monitor]

  You wanted to post this in case someone else ran into a similar problem.

  This is what worked for me.

  I copy the files from the print processor from another machine to work with the same architecture as the one who has the problem (x 86 or x 64).

  Step 1: Stop the print spooler service.

  Step 2: Copy all the files and folders on the system to work under C:\Windows\System32\spool\prtprocs\x64.

  Step 3: Make a backup of the system files listed in the C:\Windows\System32\spool\prtprocs\x64 problem.

  Step 4: Paste the files that you copy from the system of work in the case of the United Nations, the problem system.

  Step 5: Start the print spooler service.

  Try to connect or install your net printer and it should work now.

  I hope this work for all of you.

• Tried to install a printer in windows 7 using a vista driver. Now, I get an error 0 x 00000002.

  The problem occurred when trying to install a network printer on my laptop that is running Windows 7.  Now, when I select the printer in the menu "add a printer" and press "Next", I get 'Unable to connect to the printer' & 'the operation failed with error 0x00000002 ".
  The printer is a network printer, connected to my desktop running Vista.  In addition, it is a Brother MFC-8300.
  I can install the printer when it is connected directly to my laptop, but when I try to add it as a network printer, I have the problem that I have just described.  I should mention that I had to install a special version of the driver ("Brother MFC-8300 v.2") on my desk to solve another problem, I had with another computer on the network, which was running Vista-64 (see http://www.vistax64.com/vista-print-fax-scan/77226-brother-mfc-8300-printing-blank-pages.html).
  So basically this is what happens:
  (1) I click on 'add printer '.
  (2) I click on 'Add a network, wireless or Bluetooth printer.'
  (3) I select ' Brother MFC-8300 v.2 on VISTAMACHINE ' and click 'next '.
  (4) a "Windows printer Installation" window appears and says "connection to Brother MFC-8300 v.2 on."
  VISTAMACHINE"and underneath"seeks pilot."
  (5) a "Add a printer" window appears with an "X" inside a red circle next to the mention 'to connect to the printer.
  "Windows cannot connect to the printer", and "Operation failed with error 0x00000002".
  Does anyone know what I need to do?

  Create two printers on the computer, the device sharing.  Make a word share name, do not use the name of the driver for sharing.  Spaces in the name to make it even more difficult when you set a SMB (local port) connection to the printer.  Set the Port for two printers shared the same (I assume that the device is connected to a USB Port).

  Use the driver Vista Inbox for the part for 32-bit machines.  Use the driver provided Brother (Brother MFC-8300 v.2) share for 64-bit machines.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• I installed my printer, but it wants to install again and again and again

  My printer HP Deskjet F2180, my system is Windows XP.  I installed my printer successfully, but whenever I turn on the PC it wants to install again & again & again.  It puts the PC and just won't let me continue unless I have pass through his process, but all I want a simple printer that doesn't act like an attention seeking spoiled child who keeps jumping up and down shouting "notice me, me" and makes my default printer.

  I talked to technical assistance from HP who sent me an e-mail long complicated instructions meant to counter the problem, I realized the letter, and that did not work.  They never answered my other emails.  I searched sections of Q and a HP sites and these support forums at unsuccessfully. I uninstalled and reinstalled, I fixed, says do not update for 6 months or more and simply ignored. But nothing can stop the process.

  Why can't be just one simple printer like any other, I had.  I also have a laser printer Brother that I use for everything except color printing and that everything is there waiting for me to use it, I had the other HP printers and recommended HP people because I never had a problem before unlike Epsom and Canon and then comes along the HP Deskjet F2180. He drives me crazy. It such a waste of time.

  In another where I work there is another HP printer (I don't know which model) which re - installs itself, is the default printer and is updated automatically, so I know I can't be the only person having this problem and makes me think that its an integrated - marketing this kind of thing.

  I'm not very technically in the know, and I don't know how to make MS-DOS or something like that. many instructions on these forums do not make sense to me, I'm afraid I need step by step, press this button type instructions now for what that substantive gubbings, but if someone can help me I would be very grateful.

  Is it that simple?  I did as you instructed and I look forward to a hassle-free printing I'll be in touch only if this does not work.  Thank you so much x

• How can I install my printer model Dell 720 on my new Dell XPS 8500 with windows 7

  I have the software for my Dell 720 printer, but it will not install on my new Dell XPS 8500 with windows 7.  It works fine on my Dell Dimension 3000 with windows XP.  I would use this printer with my new system

  Dell is not a Windows 7 driver for this printer.  The closest thing they have is a driver for Vista 32 bit.  So your options are to (1) Download 32-bit Vista driver and try to install in compatibility mode, (2) use XP Mode if you have the professional or Enterprise version of Windows 7 Ultimate, (3) buy another printer.

  You can download the Vista 32-bit driver

  http://www.Dell.com/support/drivers/us/en/19/product/Dell-720

  Good luck.