Install ESXi keeps restarting without end

Similar Questions

• Install ESXi 4 does not end

  Hello world

  I am looking to install ESXi 4 but I'm running into some issues.

  I have access to the initial boot loader screen and select the option to install ESXi. From there, a series of files are loaded on a black screen with many... (periods) that represents progress. Once finished, I happen to a black screen and yellow with a progress downstairs bar. This appears to be complete on stage: loading managed dvfilter (or something like that). At this point, the server restarts and the progress of the installation starts from the beginning. Am I missing something with that? Certainly, any help is appreciated.

  IBM xseries 346 with 2 x Xeon 3.6 GHz CPU

  8 GB RAM

  6 x 73 GB SCSI HARD drives configured as a RAID 5 with a hot spare.

  Thank you

  Scott

  Welcome to the VMware community forums.  dvfilter is part of this new feature - vNetwork API of the device.   You can just check the network adapters are on the list that ESXi can recognize - http://www.vm-help.com/esx40i/Hardware_support.php.  If you press ALT-F1 and ALTF12 during startup, you see other errors?

• Windows Explorer keeps restarting without stopping

  2 weeks ago windows Explorer started to reboot when I open a specific folder on my laptop. Last night, just kept windows Explorer restart top is on I stop the laptop and he did it again, but he did the same thing as soon as windows has started. I went in Mode safe reflection might be able to solve the problem there, but it's the same thing, kept windows Explorer restart Windows started. I rebooted my computer and click F8 and "restored the system" to a restore point prior and rebooted the computer, but it's the same thing. WHAT HAPPENED TO MY LAPTOP?

  SONY VAIO CR 354

  OS: WINDOWS VISTA

  ANTIVIRUS: NORTON 360 V4 (THIS IS THE LATEST VERSION OF 360)

  Hello

  Reinstall the printer driver and your audio/sound driver. Note update drivers was also
  one of the methods in the previous troubleshooting. Have you tried the clean boot method?
  Did you also run CheckDisk?

  If necessary AFTER those try a repair Installation / upgrade on the spot that allows you to keep
  programs and data backups however redundant are always a good idea.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.

• HP Envy 7 ": HP laptop"logonui.exe application error"+ auto repair restarts without end

  I really don't know exactly what is the name of my product, however, my problem is very specific:

  First I got an error message titled something in the sense of "logonui.exe application error" with a background black, I couldn't start my laptop up so I went to recovery and just all backed up successfully and went to reformat but it got stuck at 2% until he finally said the Recovery Manager has stopped working , I tried just about everything until finally my laptop just say 'auto repair start' goes to a blue screen, restarts and repeats again and again. I can't really do anything, it seems pretty well doomed. It seems like a virus, but really, I don't know what I can do, if the only solution is to send in for repair, can I try now?

  Kind regards

  Josh

  I get the "HP Recovery Manager failed. Error code = 0xEFFFFF08"pop up whenever I try to get back and I'm not using any USB devices.

  I ran a scan of the hard disk on UEFI and my results have been:

  Smart Check: spent

  DST short: failure

  Failure ID: QCQ7PH-7RK701-XD7WMF-60VL03

  Product ID: N1L03EA #ABV

  Hey!

  "The 'LogonUI' in Windows application manages your startup and shutdown graphical user interface (GUI) that displays the Windows on your screen logo and the status of your judgment." It also displays the login screen that you see when you start the PC. Corruption in this application could lead to problems start and stop, such as gel. »

  I found this paragraph from a titled link: LogonUI.Exe Application error after update 8.1 of Windows that can help you! There are a few in there troubleshooting steps that may help.

  Here is a Microsoft document for you to read as well. This is called: error: LogonUI.exe application error.

  I understand what you are saying about this marking as resolved. Tell you what, read the links I provided on the error in the application (which, from what I've read, in my opinion, does not sound like a virus), replace the hard drive and then if the issues are resolved for you, come back and mark this question as an acceptable Solution for others.

  I wish you the best!

• Install ESXi 5.5 restarts the Adaptec RAiD card

  Hello

  I have a job im trying to install ESXi 5.5 on. I got it running on the machine perfectly well until I added a map of Adaptec Raid 3805. Now when I try to install ESXi it restarts everything when trying to load the AACRAID driver. It isn't hanging or show all errors. It just restarts immediately.

  VMware claim the Adaptec 3805 is compatible with ESXi 5.5

  Anyone got any ideas on why this is happening?

  Managed to solve this problem.

  I had to disable virtualization technology Intel® for Directed i/o in bios and now the installation program works perfectly

• My computer keeps restarting with a driver failure

  I have a laptop Acer Aspire that I have had for about 9 months. I've noticed a few problems over the last 4 months with this computer. It keeps restarting now. Sometimes after it restarts once it starts up perfectly fine but other times he keeps just restarting without end I tried to do a clean boot, cleaning the registry, the chkdsk, the sfc and update the display driver (since sometimes random color banding appears on the screen instead of a reboot or the Office would just go crooked with lines paralyzed at startup programs open to the top or icons). But im still getting the same problem and recently I got a blue screen on a driver failure.

  These are the details that I received from whocrashed:
  crash dump file: C:\Windows\Minidump\101713-49764-01.dmp
  Uptime: 03:29:14
  This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
  Bugcheck code: 0x9F (0x3, 0xFFFFFA8007855A10, 0xFFFFF800064223D8, 0xFFFFFA8006974880)
  Error: DRIVER_POWER_STATE_FAILURE
  Bug control description: this bug check indicates that the driver is in an inconsistent or invalid power state.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.
  Any help will be appreciated

  S

  There was only a single file DMP here

  Your other machine crash is connected to AODDriver2.sys AMD OverDrive Service pilot from Advanced Micro Devices.

  I would like to re - install the most recent driver available (even if the same date) and if you're overclocking STOP

  In addition I would like to remove and replace Kaspersky with MSE

  Kaspersky is a common cause of BSOD.

  
  

  I remove and replace it with Microsoft Security Essentials at LEAST FOR TESTER.

  http://support.Kaspersky.com/downloads/utils/kavremover10.zip
  http://www.Microsoft.com/security_essentials/

• BlackBerry Smartphones Blackberry 9780 keeps continuously restarting without booting.

  Hello guys,.

  I have a Blackberry Bold 9780. It was working fine until this morning until what I installed an update for the application of the Tube map. After that it automatically restarted and has been permanently by doing so without even entering the operating system once. In other words, it just keeps restarting itself without actually starting. I tried to enter safe mode, even that does not work!

  Any suggestions as to what should I do next?

  Thank you very much...

  If safe mode does not work. Reload your OS. Read this article. How to perform a clean Windows for BlackBerry Device Software reload.

  Good luck!

• My 9380 curve blackBerry smartphones keeps restarting even after work in coursIn and remove all installed applications

  My curve bb 9380 keeps restarting after several minutes even after I wiped and deleted all installed applications. It has also become slow when downloading

  Hello kashez

  Welcome to the Forums of the BlackBerry Support

  If you have already removed all apps and you camera rebboting on its own, then you should try a refill of OS to rule out any software problem, have you tried?

  KB11320  : How to perform a reload own BlackBerry Device using BlackBerry desktop software for windows software

   

  But first make a comeback.

• It keeps telling me that the required updates are not installed... I have already installed SP2 and restarted my computer TWICE. Please help me!

  He continues to tell me that the required updates are not installed in order to download and run Internet Explorer 9... I have already installed SP2 and restarted my computer TWICE.  Please help me!

  I wouldn't bother downloading it, but I need for a course that is only compatible with IE9... He is constantly telling me that "Setup does not support this pack", even if the sine qua non pack has been installed!

  Hi stephprice,

  I suggest you follow the articles provided below and check if it helps.

  http://support.Microsoft.com/kb/910339/

  http://support.Microsoft.com/kb/971058

• Install ESXi 4 without cd player

  What is the best way to install ESXi 4 on a server with a cd player?

  Hi 1 x 1 x 1

  You can use HP USB Disk Utility to copy the CD SmartStart ISO on a USB and then directly boot from USB.

  Link to utility USB HP: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=US&swItem=MTX-9239be09de8445df862ef01788

  In addition, as Andre says if you have ILO on your HP Server then you can use the Virtual Media feature images and mount iso from another computer remotely.

• Mac keeps restarting and is very slow running

  Why not keep restart my mac and works very slow since I installed El Capitan?

  Most likely because you upgraded an already dysfunctional system without the first fix. Or your HARD drive may be faulty.

  Try these in order to test your system after each see if it is back to normal:

  1. a. reset the PRAM and NVRAM on your Mac.

  b. Macs with Intel processors: reset of the controller (SMC) system management

  2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:

  HD recovery start: restart the computer and after the buzzer, press on and press and hold the

  COMMAND and R keys until it appears the Utilities menu screen.

  3 fix the hard disk and permissions: select startup drive in the Utilities menu utility. Fix the hard drive and the permissions as follows.

      When the recovery menu appears, select disk utility and press the continue button. After loading disk utility select it

      back from Macintosh HD entry of the list on the left.  Click first aid button in the toolbar. Wait for the operation

      ends, then quit disk utility and back to the main menu.

  4 reinstall OS X: restart from HD recovery Select reinstall OS X from the Utilities menu, then click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.

  
  

  When you get it working properly, and then download and reinstall OS X El Capitan 10.11.3 Combo Update.
  

• Satellite A305 keeps restarting

  I have a Satellite A305-s6857.
  Windows xp 64 bit vista.

  This is what is happening, please bare with me it gets really confusing. Laughing out loud

  My laptop keeps restarting on its own.
  at first I thought it was overheating - so I downloaded SPECCY and clean the radiator using carbon Spray. CPU temperature average around 60 degrees.

  so after ANOTHER REFORMAT. the computer worked fine, installed all the drivers using the recovery CD. (computer remained without restarting)
  everything worked well. After you have installed all the drivers, I restarted the computer and it came

  "your account has been disabled. Please contact your system administrater' so I went safe mode created an administrator account.
  Another thing to install TOSHIBA came after rrestarting the computer where I would choose an account name and password.
  so after that I got through the process, he went on the desktop.

  After that, he did it again. Computer keeps restarting, sometimes only takes a few seconds, sumtimes lasts 5 minutes.

  RELATED ISSUE: Tuner FM from Toshiba keeps repeatedly installation and restart the computer.
  then I went to msconfig and disabled everything on start up.

  I don't know much about laptops, but in MY OPINION.

  It is a software problem, VISTA/driver problem, if its vista I think it has something to do with the admin default thing, cus when I am connected to this account, that it has not been restarted.
  but when this thing "account disabled" came and I had to use a new user, he did it again.

  AND ALSO: When in safe MODE, the computer does not restart.

  someone please get back to me.

  Thank you
  Jason winter

  Hello

  > I have a Satellite A305-s6857 running windows xp 64-bit vista.

  What Windows environment it restarts: Win Xp or Vista or both?

  > so after a REFORMATER FEES. the computer worked fine, installed all the drivers using the recovery CD. (a computer stayed on without restart) everything worked fine. After you have installed all the drivers, I restarted the computer and it came

  It looks like a driver/driver causes reboot.

  > SECONDARY QUESTION: Toshiba FM tuner keeps several times install, then by restarting the comp. I went to msconfig and disabled everything on start up

  Can remove you it at all to check?

• HP Pavilion dv2000t keeps restarting...?

  My friend has a laptop HP Pavilion dv2000 and it was incredibly slow. Someone had installed a variety of free antivirus and firewall for them programs, but it seemed that there was still a virus somewhere and nothing turn scans. The laptop is used primarily for access to the internet and has not been inflated with the software. We decided that a new facility would be the best bet. I used my external hard drive to back up all the files that they wanted to keep and we used the recovery DVD (we had to order one of hp because the burned game could not be located) to reinstall Vista. Initially, he started not as I expected to (na not ask name of the administrator or the zone or something like that, but I tell myself it's because it's a "valuation" and not a new installation) and the task bar and start menu was set to classic mode (not a huge problem (, but I thought the default was aero). Now the operating system takes about 5 minutes before it restarts. We tried to disable automatic reboot in case of system error, but that doesn't seem to make a difference. I have a feeling that the virus survived the process of "valorisation" but I'm not sure. Safe mode seems to be stable. Any suggestions?

  Has nother thing interesting I discovered everything in tinkering with him last night is that the recovery process while retaining a (c) for only 24 GB, the total capacity of the HD is 160 GB. The optical drive is labeled (d) and there is no HP_Recovery partition, which I thought to be a factory default. On another laptop HP (dv6000) there are two partitions (C :) and (d), (d) being the HP_Recovery partition and the optical drive marked (e). The system continues to restart without any error message. Finally does anyone know if recovery disks (disk: this is a single dvd) are able to completely reinstall the operating system? For example if I used a live CD to completely erase the hard drive (overwrite with zeros or) can I still restore Vista with the recovery disk? Or part of the operating system should remain intact because it is just "valorisation"? Thank you,

  Leonard Ortega

  Message edited by clueless384 on 01/12/2008 11:36

  Yes we finally thought to it. It keeps restarting as part of the new installation procedure. I don't know why he has to do, but for some reason any HP needs to restart the system several times in order to get all the speed. Just start it upward and let it keep restarting, we had to let it run all night, so it may take a few hours. Just let it go, and it should work after that. Let me know if it works!

• Help! My A1-811 keep restart itself

  I need help! Ajter try to update to KitKat 4.4.2 manually using this article http://acer.custhelp.com/app/answers/detail/a_id/29931#_ga=1.159508285.1207883840.1437316707 my compressed get reboot forever. I did everything also, I downloaded the PDF of drivers and manuals Section and did exactly what he said, but the update will not install, just the image with the fallen Android and some information such as that in the manual. So after that I just pressed restart system and... nothing. It keeps restarting itself. Help me is it possible to fix it?

  PS: In the section drivers and manual there are two files for the different image files. I get the WW_GEN, because before trying to update, I checked the last image in my settings, and it was ending with WW_GEN.

  Good news! Today, I bring my tablet of service and it works with KitKat 4.4.2. But IronFly I have question for you. You said that the first time that I connect my Google account it automatically detects the applications installed in the front, but he didn't do it. I'm going to Google game store, and he wasn't the applications and games that has been installed on my front tray. Why?

  EDIT: Oops, does not check in the sections "All". Sorry now everything is fine as before. Apps and games backup is saved and I can't countinue where I was arrested

  But still, after all that I spent, it was terrible. Acer should do a video how update manually, I did everything as it says in the article! Maybe I should post this in the suggestions subforum?

• Start without end after a update___ of Windows Vista

  I and the HP laptop with Windows Vista.  I lost a hard drive last week and replaced myself and reloaded all my software.  No problem after that until this morning, I got a Windows download update, I went to auto install updated.  After the download, the machine/Windows is stuck in a start-up without end with the message «loading update 3 of 3»

  I tried F8 and can successfully access the boot menu.  I tried all modes safe mode adds the restore option.  All of lead them to a black screen, with a lot of waiting, and then hand it to the boot without end upward.

  I only have recovery disks that were made for me by the Geeksquad at time of purchase.  My computer is powerless, that I am at this point.  Help, please.

  Hello

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista/Windows 7 with the Windows installation media and use the repair feature

  How to do a startup repair in Vista and Windows 7
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the system - Vista Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  This tells you how to access the system - Windows 7 Recovery Options
  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to do a system restore in Vista and Windows 7
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a disk of Vista or Windows 7.

  Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
  x 64 64-bit.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.