Install LifeCam Studio offline

Similar Questions

• Install lifecam HD6000 offline?

  How can I install driver Lifecam HD6000 & software offline?

  I want to just make some videos and store them on the hard drive.

  The driver on the CD needs to connect to the internet, but I am not able to do.

  Hello

  You can download the driver for Win XP from here:

  http://www.Microsoft.com/hardware/en-us/p/LifeCam-HD-6000-for-notebooks/7PD-00001#support

  Click the 'Support' tab, choose the operating system and your language - then click on download.

  LC

• LifeCam Studio has stopped working after the firmware update?

  Hi all.

  I bought one of the new LifecamStudio 2 days ago. I installed the camera, following the instructions of course. At the end of installation, I was able to get my self in the window of the Lifecam software, up to now, no problem, the device worked. Suddenly, a pop-up message will appear, telling me that the firmware of the device should be upgraded, then I pressed OK. The update of the firmware started but was abandoned shortly with an errormessage, saying the upgrade was not successful. I tried to reinstall the firmware, but now he tells me Hat I have the latest firmware installed. The nproblem is therefore now that, when I instert my camera in USB port windows find the camera, but as soon as I start any program it uses the camera he's leaving a Lifecam icon (in the hardware Manager that is) to an unknown unit. Software Lifecam studio told me that there is no camera installed. I installed the camera on other computers without a bit of luck.

  / Stefan

  Fixed it :)
  In the Device Manager under imaging devices I've seen "Webcam" - before the botched fw update, it said 'Microsoft LifeCam Studio' and was a diff driver.  I rolled back the driver (or if it does not work you can force it to use one of the program files \ lifecam) then reinstalled lifecam - my cam works now.  Now - what's the problem with this update utility and why it changes what is driving the camera uses?

• Re: Cannot install Visual Studio 2008 on Vista 32-bit

  Hello

  I have a satellite P200 with Vista Home premium SP1 and I need to install it on Visual Studio 2008.
  When the install wizzard starts it checks the compatibility of the computer and could not return this:

  "Setup has detected that this computer does not meet the requirements to install this software. These conditions must be met before you can install Microsoft Visual Studio 2008 Professional Edition - ENU
  Requirements and software prerequisites
  Windows XP Service Pack 2 update information
  You must install this service pack to complete the installation. Visual Studio requires the installation of this service pack before you install Visual Studio"

  So the only solution I have is to exit the installation wizard, so I can not install VS2008

  It seems that someone else has the same problem with a Toshiba Satellite also! See http://forums.microsoft.com/MSDN-FR/ShowPost.aspx?PostID=3392455&SiteID=12
  Microsoft product support has apparently no solution and find it strange!

  So please help me, I absolutely need of VS2008 to work and I change my laptop only because failed to install VS2008

  Thanks a ton in advance for

  Pascal

  Post edited by: pfo69

  Hi mate,

  Sorry, but just because one person in a MSDN forum has randomly the same machine you, does not mean that there is a related problem of the machine. Technically in comparing it s absolutely the same material as in an office and so why Don t you contact Microsoft technical support?

  It seems that it is certainly unwanted Microsoft and has NOTHING to do with Toshiba hardware or software, so please see MS support sites or give them a call, because it s THEIR software which won´t operate according to THEIR operating system.

  Welcome them

• How to install Visual Studio 6.0 on Windows Server 2012

  I have a build server that is located on Windows Server 2012.  I need to install Visual Studio 6.0 to build some of our VB and C++ components.  Whenever I run the Setup fails.  Can someone please tell me know how to install VS 6.0 on Windows Server 2012?

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• difference between microsoft lifecam studio model # Q2F-00013 and model #Q2F-00001

  What is the difference between microsoft life cam model studio # Q2F-00013 and model # Q2F-00001

  Hello, Paul.

  See details on the two

  Q2F-00001

  http://www.Microsoft.com/hardware/en-us/p/LifeCam-Studio/Q2F-00001#details

  Q2F-00013

  http://www.Amazon.com/Microsoft-LifeCam-Studio-webcam-Q2F-00013/DP/tech-data/B0096KSBB0/ref=de_a_smtd/176-9485188-1536144

• Two questions about Lifecam Studio webcam

  I intend to use the Lifecam Studio webcam as a security camera (I'm already aware of general limitations of webcams for this application) but I have these questions:

  (1) is its ability to see in the dark, better than the Lifecam cinema or are they using the same lens and treatment for it?
  (2) if it is a USB 2.0 camera, I use a USB Extender over ethernet, which she dumbs up to USB 1.1 speeds. I really didn't care about video, but I would still high resolution photos and I know for some that USB 1.1 theoretically has enough bandwidth for them. It is therefore conceivable that I can still run high-resolution webcam, although I bring cadence (1FPS would be perfect) or the camera meets USB 1.1 in nixing its resolution down until it can maintain a constant high rate (e.g. 320 X 240 or something like that)?
  I googled these issues and do not yet have the answers!

  Hello

  You can see the link provided below for more information on Life Cam Studio.

  http://www.Microsoft.com/hardware/en-us/p/LifeCam-Studio#Overview

  For more information on Microsoft Life Cam Studio, you can contact Microsoft hardware support.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

• Visual studio runs (.exe) file can run in the other computer where did not install visual studio?

  Visual studio runs (.exe) file can run in the other computer where did not install visual studio?

  I use a visual studio 2012 to make a program file,
  This is a file to execute, which is my generated program file.

  I can throw in another computer in which another computer has not installed any visual studio?

  Thank you

  Hi Chi,

  The question you posted would be better suited in the MSDN Forums since we have dedicated to this support; We recommend that you post your question in the MSDN Forums to get help:

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio, vslanguages, vstfs, netdevelopment, vsarch

  Keep us updated on the status of the issue.

• Failed to install LifeCam HD-3000

  Hello

  I can't install Lifecam HD 3000 on a Win XP PC with all of the updates in the order.
  An error message appears during installation says it failed without and reason and gave the following link: http://support.microsoft.com/kb/953691

  I have gone through all the steps on this link, but does not help.

  I checked the people who have had the same problem, but no help, links below I checked

  • https://social.technet.Microsoft.com/forums/en/w7itprohardware/thread/9b07dba1-2b28-47bd-9423-e4db4b8b5a6f
  • http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/LifeCam-HD-5000-driver-and-software-installation/08e7300e-C32D-4595-9799-deb3016a8041
  • https://www.Microsoft.com/hardware/LifeCam/en-us/default.mspx
  • http://support.Microsoft.com/kb/973297
  • http://support.Microsoft.com/kb/953691

  I also tried mode of fail-safe with network enabled, logged as administrator, but with the same defect.

  Why can't download us manually the installation complete SW?
  (SW 'LifeCam3.60.exe' can be downloaded from

  • https://www.Microsoft.com/hardware/en-us/d/LifeCam-HD-3000

  is not a complete package of SW, it comes in contact with MS and download more things and that is what crashes, we can see the connection in a firewall schedule downloads about 5 MB, which is of ~ 10% of the progress bar up to what it fails, then obviously, the whole package, he wants DL exceeds > 50 MB)

  Please if possible give me a link for the complete SW a manual download, or where to find a generic webcam SW, if it is not please give some advice how to do this, thanks in advance.

  Hi I solved it, please read because it might help you too!

  When I opened this thread I tried for 4 hours to solve this problem * and apparently a lot of people have problems with the installation procedure.

  When I installed the program, I noticed at the beginning in a small window that shows progress, he showed a folder he had created and had a random name composed of letters and numbers such as: 56eb37a890142, go and find him!

  In this case, it creates subfolders where the subfolder has the name «windowsinstaller»

  • Drive:\56eb37a890142\windowsinstaller\x86\windowsxp-KB942288-v3-x86.exe

  (Your path may be different, but the mine was created on a different driver/partition that my Windows driver.)

  During installation, I was going through all the steps (in fact I just leave the installation in the middle of the process, as it is, if I remember there are 3 steps, first unpacking, the other 2 steps is displayed in a new window, and I don't remember now I did the 2nd step, however, this is the 3rd step that fails but in this hack you do not go there)
  ... instead, once the 56eb37a890142 folder was created, I went in the subfolder and installed the

  • WindowsXP-kb942288-v3 - x 86 .exe

  Once this file has been installed, Windows automatically forced the closure of programs and handed over in market, after reboot, I returned to the

  random 56eb37a890142 of the folder and double-click the following file

  • Setup.exe

  All of a sudden the installation went through, obviously something is wrong with the installation program, I think it not to apply the update of windowsxp-kb942288-v3 - x 86 .exe, or somehow fail to do.

  One last thing on the randomness of the '56eb37a890142' folder, I have a low memory, if the installation failed, the folder would be removed, so we might have to make a copy of it.

  Edit: I checked the Windows Installer "windowsxp-kb942288-v3 - x 86 .exe '.

  It's a "Windows Installer 4.5 Redistributable", it can be downloaded separately from the link here below, we could try this instead of the procedure described above:

  • https://www.Microsoft.com/en-US/Download/details.aspx?displaylang=en&ID=8483

• Cannot install lifecam hd-3000 on my old toshiba laptop windows xp, I have no configuration required

  my computer - toshiba 2004 (old) Windows xp cannot install lifecam hd-3000

  Hello

  How you are trying to install LifeCcam on your computer?

  Make sure that the computer you are using meets or exceeds the minimum video, processor and memory to install and run LifeCam.

  Open the DirectX Diagnostic tool. To do this, follow these steps.

  (a) click Start, click run, type dxdiag in the Open box, and then click OK.

  b) on the System tab, note the processor and memory values listed under System Information.

  (c) on the view tab, note the value of approx. total memory is listed under the device. Most LifeCams require at least 2 MB of video memory.

  (d) click exit to exit the DirectX Diagnostic tool.

  Compare the values that you noted in the minimum system requirements that are required for LifeCam. You can find the system requirements for each LifeCam on the Microsoft Hardware Web site. Click on the product of LifeCam you have installed, and then click the Details tab to review the system requirements.

  To compare the system requirements for your LifeCam product, please visit the following Microsoft hardware Web site:

  http://www.Microsoft.com/hardware/digitalcommunication/ProductList.aspx?type=LifeCam

  Note: If the computer does not meet the minimum system requirements, contact the computer manufacturer for more information about how to obtain the updates and upgrades.

  For further information, you can consult these articles.

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

   

  Troubleshoot failures to find the new LifeCam hardware

   

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/

• LifeCam studio won't launch

  Hello

  My lifecam studio worked pretty well, but I kept getting a message saying something about the requirements is not enough
  but it was the path in front of the requirements. but I was going to upgrade my CPU when even if I upgraded from AMD Phenom II x 4 965 140 Watt 3.5 Ghz
  to a Phenom II x 6 1100T 125 watt 3.4 Ghz after this update the lifecam studio software will not launch if it dose it stops a few seconds
  and said he met an error inform Microsoft of this error. I can use the webcam with other programs like adobe flash media live encoder
  and other streaming broadcasters. but I can't use it by its self like to take a photo or video to upload to youtube, things like that.
  It does not work with Skype, yahoo messenger, Microsoft, live video chat sites or programs. I was told that I had to update the bios I did
  but which has not helped with the lifecam studio, but with other hardware and software. I have the AMD Phenon II x 6 1100t clocked at 4.4 GHz
  and that did not help ether are my Nivida GeForce 260 SLI graphics card OC HD 3D ready I have 8 GB memory 1000GO drive hard windows XP
  SP3 gigabyte mother board everything is new, less than a year less than 6 months old... I put the AMD Phenom II x 4 965 at the back of the computer
  and the software worked as he did before. but I need the AMD Phenom II x 6 1100t I play a lot of games on my PC and I also live stream
  at the same time and the AMD Phenom II x 4 956 clocked to 5.2 GHz could not keep up.
  I hope I have not confused anyone, but I wanted to give as much info as I could to help him.

  Thank you!

  I discovered what the problem was.

  It is the combination of XP a 6 core CPU and the Lifecam software, they do not work together.

  To get the lifecam to launch, I have to go into the Task Manager and click on process and then right-click on the exe lifecam, then click set affinity, and then unslect 2 carrots to make lifecam think that there are only 4 hearts, then it works fine. The only downside is: you must do this every time you want to use the lifecam.

• LifeCam Studio on Windows XP SP3 problem

  LifeCam Studio on Windows XP SP3. Connection camera after installation of the software (driver). Not dedect camera. Error code 28. Massage: "the installation of the driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for Windows 95 or later. Contact your hardware vendor. "Windows Vista on the same PC works fine.

  Tried all Microsoft directed - no luck.

  Help, please!

  Yuriy

  Hi YuriyBelitskiy,

  1. Did you the latest changes on the computer?
  2. What are the steps you tried to solve the problem?
  3. When was the last time it was working fine?

  See the article and try the steps mentioned, check if it helps.

  Troubleshoot failures to find the new LifeCam hardware

  http://support.Microsoft.com/kb/929087

• Receive error 1327.Invalid Drive: H:\ installing Pinnacle Studio 14 download. __

  Receive error 1327.Invalid Drive: H:\ installing Pinnacle Studio 14 download. I have Pinnacle Studio 12 installed. Pinnacle response: you receive the error message is not an error of Studio, but a Microsoft error message. This problem may occur if a registry key contains an incorrect value in a data field. The best thing to do in this case is to contact Microsoft and they should provide a solution for this error: www.microsoft.com.  I found where this issue occurred with some Microsoft products, installation, but do not know how to fix once I get into the registry editing.

  Can someone help me please?

  Hello kthatgms,

  Click the number of the KB article to bring up the following article.
  KB Article ID: 327763 -you receive an "Error 1327. Invalid drive"error message when you try to install Office 2000

  He mentions Office but it should be the same for any program that you are trying to install.

  Please reply back and let us know if this can help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Virtual Box: Windows Vista SPK 2 do not install Visual Studio 2010 SPK1

  Using Virtual Box in my Mac OS X Lion Mountain.

  I have pretty much Windows Vista to date for SPK2 in Virtual Box.

  Try to install Visual Studio 2010 SDK, but I get an error (I forgot what it was because I am at school right now typing this) saying that a component is first necessary or something Visual Studio 2010 is first needed.

  But as I understand it, it's that should not install Visual Studio 2010 perfectly in Windows Vista SPK2?

  All the system requirements are met. What else do I need first before installing VS 2010?

  Hi John,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

  Good day!

• Cannot install LifeCam Cinema "Setup can not continue" error on Windows Vista

  Original title: I can not install Lifecam cinema on Vista Business.  Installation dies and points to kb/935961.  I followed all the recommendations in there and still no luck. Help!

  LifeCam Cinema just bought.  I have tried to install from DVD (version 3.5 installation) as well as downloaded 3.6 install from the Microsoft Web site.  Installation starts, but then fails with an error indicating that the installer cannot continue, look at support.microsoft.com/kb/935961.   I went through all the methods in this kb, nothing helps.   I'm on vista Business, SP2 and have kept with Windows updates.   I tried the end of update/install .net framework 4.0 and that did not help either.   I have NOT yet attempted to plug the camera into the USB slot at this point.

  Help!

  Hello

  1. What is the brand and model of the computer?

  2. What is the security software installed on the computer?

  3. have you made changes on the computer recently?

  4. are you able to install other programs and applications?

  5. What are the steps you tried?

  6. What is the exact error message when installation fails?

  Method 1.

  I also suggest you run the fix it tool for the link.

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2.

  Resolve the error "Setup cannot continue" when you install the LifeCam software

  http://support.Microsoft.com/kb/973297

   

  Note:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you need to disable temporarily to install other software, you must activate it as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Let me know if it worked.