LifeCam studio won't launch
Hello
My lifecam studio worked pretty well, but I kept getting a message saying something about the requirements is not enough
but it was the path in front of the requirements. but I was going to upgrade my CPU when even if I upgraded from AMD Phenom II x 4 965 140 Watt 3.5 Ghz
to a Phenom II x 6 1100T 125 watt 3.4 Ghz after this update the lifecam studio software will not launch if it dose it stops a few seconds
and said he met an error inform Microsoft of this error. I can use the webcam with other programs like adobe flash media live encoder
and other streaming broadcasters. but I can't use it by its self like to take a photo or video to upload to youtube, things like that.
It does not work with Skype, yahoo messenger, Microsoft, live video chat sites or programs. I was told that I had to update the bios I did
but which has not helped with the lifecam studio, but with other hardware and software. I have the AMD Phenon II x 6 1100t clocked at 4.4 GHz
and that did not help ether are my Nivida GeForce 260 SLI graphics card OC HD 3D ready I have 8 GB memory 1000GO drive hard windows XP
SP3 gigabyte mother board everything is new, less than a year less than 6 months old... I put the AMD Phenom II x 4 965 at the back of the computer
and the software worked as he did before. but I need the AMD Phenom II x 6 1100t I play a lot of games on my PC and I also live stream
at the same time and the AMD Phenom II x 4 956 clocked to 5.2 GHz could not keep up.
I hope I have not confused anyone, but I wanted to give as much info as I could to help him.
Thank you!
I discovered what the problem was.
It is the combination of XP a 6 core CPU and the Lifecam software, they do not work together.
To get the lifecam to launch, I have to go into the Task Manager and click on process and then right-click on the exe lifecam, then click set affinity, and then unslect 2 carrots to make lifecam think that there are only 4 hearts, then it works fine. The only downside is: you must do this every time you want to use the lifecam.
Tags: Windows
Similar Questions
-
difference between microsoft lifecam studio model # Q2F-00013 and model #Q2F-00001
What is the difference between microsoft life cam model studio # Q2F-00013 and model # Q2F-00001
Hello, Paul.
See details on the two
Q2F-00001
http://www.Microsoft.com/hardware/en-us/p/LifeCam-Studio/Q2F-00001#details
Q2F-00013
-
Two questions about Lifecam Studio webcam
I intend to use the Lifecam Studio webcam as a security camera (I'm already aware of general limitations of webcams for this application) but I have these questions:
(1) is its ability to see in the dark, better than the Lifecam cinema or are they using the same lens and treatment for it?(2) if it is a USB 2.0 camera, I use a USB Extender over ethernet, which she dumbs up to USB 1.1 speeds. I really didn't care about video, but I would still high resolution photos and I know for some that USB 1.1 theoretically has enough bandwidth for them. It is therefore conceivable that I can still run high-resolution webcam, although I bring cadence (1FPS would be perfect) or the camera meets USB 1.1 in nixing its resolution down until it can maintain a constant high rate (e.g. 320 X 240 or something like that)?I googled these issues and do not yet have the answers!Hello
You can see the link provided below for more information on Life Cam Studio.
http://www.Microsoft.com/hardware/en-us/p/LifeCam-Studio#Overview
For more information on Microsoft Life Cam Studio, you can contact Microsoft hardware support.
-
Install LifeCam Studio offline
I have recently loaded several LifeCam Studio webcam on XP SP3 machines installation.
However, the only problem that occurs is that the installation wants to an available internet connection to install the necessary drivers, even if I download the executable file of the product support page.There is workaround to allow offline installation? The customer that I install these cannot allow an available internet connection on these machines, for security reasons.Hello
Installation requires Internet access to connect to a specific server from Microsoft.
See the link.
http://support.Microsoft.com/kb/973297
See also the link.
-
LifeCam Studio on Windows XP SP3 problem
LifeCam Studio on Windows XP SP3. Connection camera after installation of the software (driver). Not dedect camera. Error code 28. Massage: "the installation of the driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for Windows 95 or later. Contact your hardware vendor. "Windows Vista on the same PC works fine.
Tried all Microsoft directed - no luck.
Help, please!
Yuriy
Hi YuriyBelitskiy,
- Did you the latest changes on the computer?
- What are the steps you tried to solve the problem?
- When was the last time it was working fine?
See the article and try the steps mentioned, check if it helps.
Troubleshoot failures to find the new LifeCam hardware
-
Microsoft Lifecam Studio freezes frequently
Can someone tell me why this is happening?
I didn't start playing the drums with the students, but this CAM keeps freezing upwards.
I have 5 m USB extension, enter a laptop Dell Inspiron 32-bit software.
Kind regards
Marco
Hello
1. what program do you use to access the Internet through Microsoft Life Cam ?
2. the program-specific problem or is it random?
Method 1:
You can read the following article. It States on the possible troubleshooting steps that we can try to fox to the question:
Microsoft Life Cam Readme and troubleshooting information
http://www.Microsoft.com/hardware/LifeCam/en-us/default.mspx
Method 2:
Downloaded the last life Cam Studio updated Firmware and check if it can help solve the problem:
Life Cam Studio: http://www.microsoft.com/hardware/en-us/p/lifecam-studio#support
Also check out the following link:
Support for Microsoft mouse, keyboards, cat life, life Cam & more
http://support.Microsoft.com/GP/LifeCam
Let us know if it helps!
-
LifeCam studio resolution is immutable 160 x 120
I don't know when it happened but my lifecam studio resolution is immutable 160 x 120. He has no other option of 160 x 120 resolution and works in 160 x 120 in other programs like Skype. He used to work well in other resolutions
Here's my dxdiag System Info:Time of this report: 21/08/2011, 16:23:50Computer name: RED-PCOperating system: Windows Vista? Home Premium (6.0, Build 6002) Service Pack 3 (6002.vistasp2_gdr.110617 - 0336)Language: Japanese (regional setting: English)System manufacturer: gatewaySystem model: GT5622BIOS: Default system BIOSProcessor: Intel (r) Pentium (r) Dual CPU E2160 @ 1.80 GHz (2 CPUs), ~1.8GHzMemory: 3070 MB RAMPage file: 1530 MB used, 4843 MB of available spaceWindows Dir: C:\WindowsDirectX version: DirectX 11DX setup parameters: not foundDxDiag Version: 7.00.6002.18107 32 bit Unicode---------------Display devices---------------Card name: NVIDIA GeForce 9500 GTManufacturer: NVIDIATrack type: GeForce 9500 GTDAC type: Integrated RAMDACThe device key: Enum\PCI\VEN_10DE & DEV_0640 & SUBSYS_064810DE & REV_A1Memory display: 2287 MBDedicated memory: 1007 MBShared memory: 1279 MBCurrent mode: 1920 x 1080 (32 bit) (30 Hz)Monitor: Generic PnP monitorName of the driver: nvd3dum.dll, nvwgf2um.dll, nvwgf2um.dllDriver version: 8.17.0012.7533 (English)DDI version: 10Taken BGRA supported: YesDriver attributes: Final retailThe pilot/size date: 25/05/2011 02:09:05, 11992680 bytesWould be WHQL logo: YesDate stamp WHQL:The instrument identifier: {D7B71E3E-4500-11CF-036E-44261FC2C535}Vendor ID: 0x10DEDevice ID: 0 x 0640SubSys ID: 0x064810DERevision ID: 0x00A1Revision ID: 0x00A1Video Capture sources:Microsoft LifeCam Studio, 0 x 00200000, 1, 1, LcProxy2.ax, 3.60.0250.0000Device name: Microsoft LifeCam TMJoint: 1Controller ID: 0 x 0Suppliers of products/ID: 0x045E, 0 x 0772FF driver: n/aHi iDarkEden,
· Have you made changes on the computer before this problem?
· You receive an error message?
I suggest you put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After the boot minimum troubleshooting steps, follow step 7 in the link to return the computer to a Normal startupmode.
Also uninstall and reinstall the lifecam software.
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
For reference:
http://support.Microsoft.com/kb/973297/en-us
-
green tinted receiver lifecam Studio
Now just bought the LifeCam Studio (HD 1080 p) so I'm not very intimate with her. When at last be able to communicate with a family member of the small image that is displayed in the lower left corner of what they received as well as what they received was largely tinted green color not true. What we received was. Is there something I need to do?
Hi RichardBrakenbury,
You can read the following article and try the suggested steps and check if that helps:
Don't troubleshoot bad or no video or problems to start the LifeCam software
http://support.Microsoft.com/kb/933310
Hope this information is useful.
-
I want to record 1080 p with my Lifecam Studio, this software is available?
Hello
I recently purchased a Microsoft LifeCam Studio 1080 p. I understand that the software provided record in up to 720 p.
I'm looking for a software that will allow recording 1080. I am currently trying to connected to my Macbook Pro right now.
My office is an Intel Core i7 920 @ 3.33 ghz with 12 GB of memory and a 2 GB XFX Black Edition 5970. So more than powerful enough to handle the hard power draw record 1080.
In advance, I appreciate a lot of help.
Kind regards
John
Hello
See this link-
http://Techland.time.com/2010/09/17/quick-look-at-Microsofts-LifeCam-Studio-1080p-webcam/
-
LifeCam Studio has stopped working after the firmware update?
Hi all.
I bought one of the new LifecamStudio 2 days ago. I installed the camera, following the instructions of course. At the end of installation, I was able to get my self in the window of the Lifecam software, up to now, no problem, the device worked. Suddenly, a pop-up message will appear, telling me that the firmware of the device should be upgraded, then I pressed OK. The update of the firmware started but was abandoned shortly with an errormessage, saying the upgrade was not successful. I tried to reinstall the firmware, but now he tells me Hat I have the latest firmware installed. The nproblem is therefore now that, when I instert my camera in USB port windows find the camera, but as soon as I start any program it uses the camera he's leaving a Lifecam icon (in the hardware Manager that is) to an unknown unit. Software Lifecam studio told me that there is no camera installed. I installed the camera on other computers without a bit of luck.
/ Stefan
Fixed it :)
In the Device Manager under imaging devices I've seen "Webcam" - before the botched fw update, it said 'Microsoft LifeCam Studio' and was a diff driver. I rolled back the driver (or if it does not work you can force it to use one of the program files \ lifecam) then reinstalled lifecam - my cam works now. Now - what's the problem with this update utility and why it changes what is driving the camera uses? -
LifeCam Studio works with laptop, not the Office? (Pilot questions)
I have a LifeCam Studio that works with my Acer laptop but does not work with my desktop computer.
Skype and ManyCam on the desktop, suffice to say that the unit is used with another program. I uninstalled and reinstalled the program and the driver manager devices, as well as the uninstall and reinstall the LifeCam software.
In my laptop Device Manager, the camera returns as LifeCam and a composite device, but on the desktop, it only installs under imagery as "webcam."
Any ideas?
Hello
If another application has control of the camera it is not available for use by others
programs up to what he was released by the control program. Usually, the camera will
be released when you close a program. Check in the Task Manager and close the program
If shown, or restart. Some messengers has control of the camera, so you would need
to ensure that the program has closed before the unit would be available for use
in other programs.See the section "" I see the following error message: the camera is in use by another program "article."
Troubleshooting: Webcams
http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/webcam/LifeCam-SetupYou can also run the troubleshooting of devices & integrated utility and check the issue.
Open the hardware and devices Troubleshooter http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Let us know if it helps. If the problem persists, we will be happy to help you.
-
LifeCam Studio must adjust settings to each Windows session
Each time before use twinkle 'Lifecam Studio' I have to adjust all the settings like Zoom, 50/60 Hz and others...
Savings by apply and OK is effective only during the Windows session...
Is there a way to save these settings to a new desired adjustment? ...
Thank you Jaime
Hi Jaime,
Thanks for the reply.
We are happy to know that your problem has been resolved.
You are always welcome in our community for other issues related to Windows.
-
I'm developing an industrial machine vision application that uses two cameras LifeCam Studio in a configuration of stereo camera using OpenCV.
In order to perform a proper Stereo 3D calibration, I need to disable auto focus entirely. This is necessary because update dot is improtant part optical characteristics and that's exactly what the calibration procedure seeks to characterize. Cannot perform a good calibraton so change the optical characteristics of the camera.
This also applies to a 2D calibration only camera.
Is there an API released for manipulation of the camera? If this isn't the case, when it comes out?
Hi Sarah,.
Your Lifecam question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the various Windows 7 forums. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads
-
No zoom control with Lifecam Studio on Win7 64 bit
When using a lifecam studio on Win7 64-bit zoom / pan & tilt functions are disabled, but works ok on other systems 32-bit, not sure if it's a matter of 64-bit or another factor?
Hello
Glad to know that the problem has been resolved. If you have additional questions about Windows, please post your questions in this forum. -
I installed a trial of design and every time that I launch, he told me that the MSVCP110.dll is missing and it won't launch.
Missing DLL https://helpx.adobe.com/creative-cloud/kb/missing-msvcp110dll.html can help
or full Win10 DURATION https://www.microsoft.com/en-au/download/confirmation.aspx?id=30679
Maybe you are looking for
-
Qosmio G30-194: no sound when watching TV
I have a G30-194. TV tuner detects the TV in my area, but they have no associate at all. She select the ROMANIAN countries, also the corect Pal/Secam system but no result. Can we know what is the problem.Thx a lot.
-
HP officejet 5610: says printer prints, but nothing happens
I uninstalled and reinstalled the printer. A the "print test page", explains its print anything. Tried to print a word, said doc printing nothing happens. Help please and thank you
-
I have a HP Envy 17-2100ED. Keys F # on top of the keyboard are shortcuts to things such as Win Support, settings of brightness, sound, wireless power. But while I'm in a game, I would that these keys do not launch applications. There is a Fn key, b
-
I have a folder with 20 000 + jpg in them, and Windows Explorer WILL DO show that nearly 500 points! and if I try to copy the 20 000 jpg files that I saved on a flash dive, Windows Explorer said that all of the 20,000 + is here! (he asks me if I want
-
How to fix a webcam showing the photo upside down trying to Skype?
Original title: program compatibility Application Applications Apps game games Legacy Crash accidents Application Hang hangs How to fix a webcam showing the photo upside down trying to Skype?