Install own computer HP
OK people I did a clean install of windows vista after cleaning a hard drive all it installed fine, but then when he started for the first time he had 111 updates from microsoft and after all the updates it initialize except in safe mode. I can't understand why its doing but its driving me nuts I tried like 4 times any HELP PLEASE
Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Windows Update Forum:
It's updated operating system Vista, upgraded installation and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
When a person built his own computer
When a person built his own computer with parts of a company like Newegg, why is it so difficult to install an operating system from Microsoft?
We are always able to help if more details are given. What happens now? No working Windows at all?
How old is the machine, and what are the specs - cpu, motherboard, RAM and disk capacity, andPower supply brand and watts ?
-If the machine is, say, five years or more I will not lose my activation of Win10 in this regard. Have your companion to reinstall sound
dubious version of Win7, at least for the time being (does not advocate piracy. Just to check that the machine is in good health).
I don't remember if this affects in fact Windows updates however. Your original message occurred when executing
Windows updates? If installation of updates you want to avoid the update of "Get Win10" thing-a-me.
This comes with the number of update - KB 3035583. I would go on kb2952664 as well
"and then frozen at the end and said my computer was bad, fix it." "
The exact wording of the error can help. Can be the key word, the error messages as many tend to be
pretty generic. Off the cuff, I assume a problem with the HARD drive.
-J' found in my brief (three days and return to Win7) flirtation with Win10 that he kept trying to 'fix' the
HDD (four times in three days) that I used for the 10 experience, but he did Chase.
Another poster I was talking about was having a similar problem with WIN10. I'll try 10 on a newer version
Drive HARD, but was already exhausted by the ordeal and I returned the my Win7 disc (PC can be like that).
"I guess that I am cut too many corners and should stick with giants like 'Dell'". "."
No! Please, I beg you! Not the Giants! D
You only cut too many corners so your processing power machines is less than your needs.
DELL reference studies right corners down.
-If the current machine is new and requires only a new component, stick with it may be viable. If it isn't...
Search current parts, order parts, read a few tutorials of the Assembly and assemble your own.
It is not too difficult (connections on the front panel can be the cause of some confusion ) Just exercise care and attention and the result is a machine equivalent to a price lower than the OEM.
Not wanting to? No worries, buy a DELL. They are good, especially if you do not play high-end Games PC.
Power CPU and RAM capacity are so high these days that you can get on a low end machine, wouldn't it
do common tasks such as the internet, the business running or emissions or hobby level Photoshop or
Audio editing.
-My first machine ('03?) was an ex-company DELL. And like a lot of this kind of
PC, he was a bit overwhelmed, and the price ($500 AUD) for what was, at the time where I bought it,
but he survived a year with me and a couple of years with a friend who I sold it ($ 100).
I am an avid player and the DELL was not really up to it, so I set up my first game machine,
and have not looked back.
.
-
I can't ping my own computer by using ping 127.0.0.1 why?
I can't ping my own computer by using ping 127.0.0.1 why?
Hello
· Were there any changes made on the computer before the show?
If the loopback test fails, the IP stack is not responding. This problem may occur if one or more of the following conditions are true:
- The TCP drivers are corrupted.
- The network adapter does not work.
- Another service is interfering with IP.
Follow the steps in troubleshooting section and check if that helps:
How to troubleshoot connectivity TCP/IP with Windows XP
-
After new XP installed the computer sees my old CD Drive not my new DVD drive
After new XP installed the computer sees my old CD Drive not my new DVD player. My newest DVD burner was in the computer before I did the reformat and install again, but for some reason any my old CD player shows. He is no longer in the machine!
Yes, I did what the measurements LITEON told me to do and I work like a dream! I went to do computer right click, click on manage, click on Device Manager, click on CD-ROM/DVD-ROM, double on this box, click on DVD region, mine had an empty box, I sailed to USA clicked OK, did a restart AND IT WORKS LIKE a DREAM! I hope that the foregoing will help someone else! Thanks for your time!
Carrmas dad
-
I forgot my own computer admin and password... How to reset help pls
I forgot my own computer admin and password... How to reset help pls
Sorry, but we are not allowed to help you with that. Contact your local computer repairer and get them to break.
-
Is it possible for an attacker to put my whole computer on their own computer?
I would like to know if it is possible for another person put my whole computer on their own computer without my permission. I know that I was the victim of a hacker very persistent during the last decade. I have no way to prove it, of course. I upgraded from Win XP to Win 7 Pro to avoid the hacker, but now I get messages of FAILURE even when I try add and remove programs Windows among the many other things. My printer don't would not print even more given that the permissions of the application of my printer have been modified so that my user account (which is supposed to be an admin acct) would not be able to print. When I tried to change the permission, I got the too familiar ACCESS DENIED message. I tried to delete a shortcut from my office the other day, and I got the ACCESS IS DENIED. Sometimes when I try to delete a shortcut, I get this popup telling me I should be an admin, so I click on CONTINUE, and he let me finally in this scenario. I don't think I should get such a popup window, trying to remove a shortcut from my desktop. Sometimes when I turn off my computer, it gives me a message saying THERE ARE OTHER USERS CURRENTLY using YOUR COMPUTER, IF YOU STOP NOW, THEY COULD LOSE SOME OF THEIR DATA. I'm the only person who uses my computer, so I don't think I should get these questions.
If you think that your PC has been compromised, then you must reinstall Windows to a freshly formatted drive. Do not wait another decade - do it now! Ask an expert if you are unsure how to do it.
-
Try to install portable computer on a new cs6 hearing. original disc was purchased 1.5 upgrade in 2012. Update does not recognize my 1.5 as a 'product calling it '! This happened last time as well. Adobe ID < deleted by the moderator >.
Then please use the Contact Customer Care. If this link does not work then I would recommend using another computer, smartphone or tablet to contact our support team.
-
Right now I'm working in a temporary site format. I'm hosting the site on my own computer. How to consider a temporary site to site online? What I need to improve my in-home service and it cost more per month?
Hi Traci,
To push the live site, you will need to:
- Publish a site to BC (menu file > publish)
- Then go in your site admin control panel and the launch of the live site to pay or to redeem a free site.
- Add the domain to the site
- Change to the Registrar of domain name servers
For steps 3 and 4, please see the following link:
The following link may also be useful:
Launch of a Muse Site | Adobe Muse CC
Kind regards
Sonam
-
The computer shuts off automatically approximately 90% way through the installation. After turning the PC back on it goes to Windows startup then comes up with an error screen that says, "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and then restart the installation. »
I clicked 'OK' about 10 times, with and without the installation disk in the computer. I turned off the computer and waited to turn back shortly to try to break out of the loop, but it doesn't work either.
How can I break out of this loop and try to reinstall Windows 7.HelloWhen has the installation failed?Method 1:Step 1:Make sure that the BIOS is up to date. Check out the link to read the FAQ about it.BIOS: Frequently asked questionsStep 2:You can also contact the computer manufacturer to update the BIOS.Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Method 2:Disconnect external devices and the installation of WindowsInstallation and reinstallation of Windows 7 -
Title says it all, I was given the creative Adobe CS6 package to my laptop to school and I would like to have programs on my PC at home. Is it possible that I can install and use them here?
Unless your school has another license, the General Adobe license allows installation and activation on 2 computers
-
Help?
You can download at the bottom of the link:
-
Help, please! I need help installing own window 8 with LEGACY BOOT OFF
Hello world!
I am running in a difficult situation. During the installation of windows 8 UEFI with Legacy Boot Support off the POWER, then the WINDOWS SETUP doesn't detect any HARD or SSD drive. Then I had to install windows 8 UEFI Legacy BOOT SUPPORT market. When all install them, I turn OFF LEGACY SUPPORT, my computer running INACCESSABLE_BOOT_DEVICE error.
Experts please help.
With Legacy BOOT SUPPORT works, my computer so slow startup and there are too many startup steps taken in place.
Thank you!
SUMMARIZE:
1: install Windows own 8 UEFI
2: SECURE BOOT: WE
3: THE LEGACY SUPPORTED STARTING: OFF
Dear KNRK!
I'm so happy. Everything seems to be in trouble, so I have to use the legacy on support. I installed the windows 8 install any update, and then upgrade to windows 8.1. The first initialization of the windows 8.1 installation, I go into the BIOS, then choose restore default.
Like a charm, everything's fine. Now he worked on Legacy support OFF and Secure Boot on.
BTW, I'm sharing my EXPERIENCE on installing windows 8 with UEFI.
1. create UEFI USB BOOTABLE WITH RUFUS
2. IF can detect the drive HARD or SSD IN WINDOWS SETUP is FINE
If 2 is not available
Go to 3
3. TURN ON LEGACY SUPPORT
3A - CREATE UEFI-BOOTABLE USB WITH RUFUS USNG MBR SYSTEM FOR BIOS
4-USE TROUBLESHOOT - COMMAND PROMT
5. CLEAN THE OS INSTALLED HDD
6 - CONVERT TO GPT
7-ACTIVE
8 - RESTART
9-HDD DETECTED
10 INSTALL
IF ENCOUNTER 03200024 ERROR 0 x
SOLUTION - REMOVE ALL HARD DRIVE - JUST LEAVE THE OS INSTALLED HARD DRIVE
AFTER FINISH INSTALLATION - REINSERT THE OTHER HARD DRIVE.
TO OBTAIN AGAIN A MISTAKE.
SOLUTION - CLEAN HDD VIA USB BOTABLE WITH MBR SCHEME FOR UEFI
CONVERT HDD OS INSTALLED TPG, ACTIVE
THEN AGAIN CREATE USB BOOTABLE WITH TPG TO UEFI SYSTEM
EVERYTHING'S OK. BUT LEGACY SUPPORT MUST BE ON.
INSTALL ALL OF THE UPDATE, INSTEAD OF UPGRADING TO WINDOWS 8.1
IN THE FIRST REBOOT, GO TO BIOS THEN RESTORE THE DEFAULT SETTINGS.
EVERYTHING'S FINE.
GOOD LUCK, EVERYBODY
Thank you very much for your help.
-
I want my installed with computer DVD burner to work by writing on DVD.
DVD - RW driver is not written on the DVD but writes on CD, no error code is given, I have NERO 10 installed on my computer. I have an external burner installed also, but that burns both DVD and CD on its own. Anais fine E
Hello
. Check if the DVD recorder is recongised in windows explore?
. If it works much earlier?
I suggest you to follow the below mentioned article:
http://support.Microsoft.com/kb/982116
Hope the helps of information. Please post back and we do know.
-
Install own speed up my MBP 2011?
Hi all
My MBP early 2011 is now almost unusably slow - 7 min on average at the start and connection. My HARD drive is less than 3/4 full, the processor is never too taxed, and 95% of the time the memory is completely appropriate (the other 5% is when I use image and data analysis, and even then, the memory's Amber at worst). I am now getting ready to Exchange during an SSD and plans to do a clean install as I am. This got me thinking - a clean install of himself (keeping the old HDD) would solve the problem? I feel that my HARD drive is so old now that it will replace without worrying... Everything / all advice appreciated! If it helps, my features are El Capitan, 2.2 GHz CPU, 4 GB RAM, 500 GB HARD drive (at 5400 RPM I think...). See you soon!
Hi Jla-1978:
Try downloading and running EtreCheck https://etrecheck.com/ and post the results here.
If all goes well, it will show you which slows down your computer.
I also have an early MBP 13 ". I've increased the RAM to 8GB (you can go up to 16 GB) and have upgraded hard drive for an SSD Samsung 850 EVO 500 GB and I've seen a dramatic speed increase.
Kim
-
I recently got a gtx 460 s decision-making and wanted to put it in my computer, I have a different diet that is 700 watts and the two connectors 6-pin at the back of the computer, the card is also sitting (re-sitting several times - not the question) I also I added more than 8 gigabytes of ram to the motherboard, I tried to remove it and start the computer , but it still sounds. Also, I can't access the bios because the monitor receives no signal.
the question I want to know is, have all the required connectors? because it seems that there is an another slot of tiny psi on the top of the card and also if my motherboard only supports the card.
Thank you
Hello:
If your PC comes with Windows 8, 8.1, or 10 of the plant, you need to change two parameters of the BIOS before installing a video card no HP.
Please see this link for which parameters to change.
Maybe you are looking for
-
Screen flashes constantly on iTunes store
When I play my iTunes on my Windows 7 computer, that is fine, but as soon as I connect to iTunes Store, the screen flickers constantly, I've never had this happen before and I was wondering if it was a problem that I can sort?
-
What is client group policy?
It doesn't let me access my account. I share the pc with my partner.
-
Media Player cannot connect to the server - Original COOD2EE7 error code
Tried media player - tools - options-network. Cannot configure the Protocol / the proxy settings. Streaming proxy settings area is empty.
-
Windows Installer update package possible flaw of sequence
Windows Update improves system performance and security by replacing system files with new versions of them, which may not contain vulnerabilities that seniors did. However, I noticed the update numbers are essentially random during installation, so
-
The remote XML parsing and ListField implementation
I use Blackberry 9800 Simulator, JRE 6.0.0 Hello I have a remote XML I want to analyze, but for some reason, my ListField shows only 1 row. I tried debugging and saw the number of attributes my vector, which is significantly greater than 1. Here is m