After new XP installed the computer sees my old CD Drive not my new DVD drive
After new XP installed the computer sees my old CD Drive not my new DVD player. My newest DVD burner was in the computer before I did the reformat and install again, but for some reason any my old CD player shows. He is no longer in the machine!
Yes, I did what the measurements LITEON told me to do and I work like a dream! I went to do computer right click, click on manage, click on Device Manager, click on CD-ROM/DVD-ROM, double on this box, click on DVD region, mine had an empty box, I sailed to USA clicked OK, did a restart AND IT WORKS LIKE a DREAM! I hope that the foregoing will help someone else! Thanks for your time!
Carrmas dad
Tags: Windows
Similar Questions
-
After you have installed the computer crashes security update.
Original title: security update blocks the computer
Tuesday, July 10, Microsoft has pushed through an update to the security features. I have installed McAfee and Windows Defender is disabled. Since the works of modernization, the keyboard and the mouse will freeze after a variable period of inactivity sometimes as short as 2 hours or as long as 12 hours. The computer must be turned off at the switch and restarted. The restart is problematic and often takes several attempts. The last series of attempts took more than 90 minutes; so this question. Sometimes on restart says explore "Cable is not connected to the"connecting to LAN"network adapter", but we all know that it is. Random reboots solved this problem. The operating system is Windows Vista Home Premium. I am at a loss. Disable for everything to run as it did before July 10 to date?
Hello
If you have McAfee installed on your computer, the time protection real Windows Defender will automatically close as McAfee already brings you this service.
Method 1:
Step 1: Check in safe mode.
You can also check if the problem persists in safe mode.
Reference:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
Now step 2.
Step 2: Perform the clean boot and check.
To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.Method 2:
Perform the system restore.
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
Method 3:
Run an analysis of auditor of system files on your computer and check for the issue.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Check the updates are installed?
http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed
Check the event viewer for the detailed error message.
http://msdn.Microsoft.com/en-us/library/aa189531 (v = office. 10) .aspx
http://TechNet.Microsoft.com/en-us/library/aa997769 (v = exchg.65) .aspx
Hope the above information is helpful.
-
Visa update problem
After trying to install the updates. my computer is now stuck in constant reboot mode while showing "Configuring updates 3 of 3 0%, do not turn off your computer. I tried to follow the instructions provided here because it seemed to be the same problem. But when I restart and hold down the F8 key so I can boot into safe mode, I tried selecting safe mode and I get the same results, and I tried again by selecting the option 'Disable automatic reboot' which seems to be an option on the same page with the option of safe mode. Whatever it is, the same message comes back and I can never get to where I can see my desktop to click 'start '. I can't get out of this cycle. I installed the update because it said I needed to install it.
*************************************************************************************************************************************************
Turn off your computer by holding the power button for about 20 seconds.Start your computer in safe mode: press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appearsDisable the automatic restart in the event of system failure:- Click Start
- Click on Control Panel
- Click on system and Maintenance link.
- Click on the system link
- In the left pane, click Advanced system settings
- Locate the startup and recovery area, click the settings button.
- In the startup and recovery window, uncheck the box next to automatically restart.
- Click OK in the startup and recovery window
- Click OK in the System Properties window
- Close the system window
After that... While STAYING in safe mode I do a system restore and maybe try a manual install of the update later.For the sake of space I refer you to the article about how to proceed.System restore
http://windowshelp.Microsoft.com/Windows/en-us/help/9f6d755a-74bb-4A7D-A625-d762dd8e79e51033.mspxWindows updates: http://windowshelp.microsoft.com/Windows/en-US/Help/8f259118-0d61-4c7a-8c56-24987e87a8171033.mspxPlease let us know if this solution works for youTheresa
Microsoft Answers Support EngineerHello
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
-
I did a backup of the computer on my old HD 110 GB. Install a new 500 GB HD and restore complete pc but windows onliy see the 100 GB on the C drive and the 9.99 on the D drive that were on my old HD and do not see the additional 400 GB. How I can solve this problem.
Hi abgolf3,
The question may be how the new hard drive has been formatted. Take a look at the way in which the reader is implemented by clicking Start > Control Panel > Administrative Tools > double-click on computer management > double-click storage. Is all the space on the disk are responsible? If so, take a look at these two documents for your problem:
Format a hard drive or partition to NTFS format
Dena
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I can not install Lightroom 6 on my laptop using 8.1 to WIN. The installer asks me to connect and when I do after 20 sec freezes the computer and the battery needs to restart. This prevents the work online help. What can I do?
Settle in the right forum.
-
I bought Photoshop CC 2015 creative thinking Cloud before running the trial version of my computer. After you have installed the creative cloud, the box with the number of days remaining still apears. How can I proceed?
Check your account indicates the subscriptions that you expect (and that the adobe, used in the next step id is correct) by logging in here and checking the status of your subscription, https://www.adobe.com/account.html
then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
If this fails, CC help | Applications creative Cloud back to update evaluation Mode to 2015 CC
-
After that I installed the free updates to service pack 1, the system goes through 2 of the 3 steps, while it recharges, then the system does not boot? To get the computer to work again, I need to run the repairer of Windows, which allows you to restore the system to an earlier point? Does anyone have an idea how to fix this?
Do your system restore, then:
Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window
> then click the one that you don't want > uninstall will appear at the top > uninstall it.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it
> Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".
When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.
> or if you do not need an individual > right-click on > UAC prompt > hide it
See you soon.
Mick Murphy - Microsoft partner
-
Original title: problem has been detected and windows has been shut down. Get the memory dump after you have installed the trial version of MS Project 2010.__space.
Computer Message: Check if you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.
Check with your suppliers of material, updates the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to start advance startup options, and then select Safe mode.
Technical information: * STOP: 0x0000008E (0xC0000005, 0x8054556C, 0xADB78A98, 0x00000000)
Beginning physical memory dump
Total physical memory dump. Contact technical support for further assistance group.
Hi fernandomventura,
Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.
If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue. Then get any drivers\software update for the device.
Step 2: Follow the steps mentioned in the articles below which deals with a similar question
General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"-restore the system to achieve ".
http://support.Microsoft.com/kb/945658/
You receive a random "0x0000008E" error message on a blue screen in Windows XP
http://support.Microsoft.com/kb/827663
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
original title: help with my sound please
After you have installed the realtek driver it says code error 10 can't start sound...
also I can't find the button sound.video and games on the Device Manager heres the message in Event Viewer:Log name: SystemSource: PlugPlayManagerDate: 17/05/2012-18:50:27Event ID: 12Task category: noLevel: errorKeywords: ClassicUser: n/a: My computerDescription:The device ' in Build Conexant Type 2 modem "(HDAUDIO\FUNC_02 & VEN_14F1 & DEV_2C06 & SUBSYS_10250126 & REV_1000\4 & 37d33e44 & 0 & 0102) disappeared from the system without first be prepared for removal.The event XML:12 2 0 0 x 80000000000000 435 System badimo-PC Modem Conexant - in the generation Type 2HDAUDIO\FUNC_02 & VEN_14F1 & DEV_2C06 & SUBSYS_10250126 & REV_1000\4 & 37d33e44 & 0 & 010200000000 Hello I want to,
The problem you describe looks like you are maybe install the wrong driver for your sound card.Have you checked that the driver is for your specific device?If you look in your system's Device Manager, is there a yellow exclamation next to the audio controller?If so, this seems to indicate that the drivers installed are not good for your sound card. Usually if you double-click the device in Device Manager, it will say something in the sense of "Device cannot start". -
When I try to start the computer in the morning, he goes off and after trying to restart the computer 2 times it becomes normal. Please give me any solution for this.
Hey Abdul HamidNagoor,
· Did you do changes on the computer before the show?
· You get the error message?
· What is the brand and model of the computer?
Follow the steps in the article.
Advanced Troubleshooting for General startup problems in Windows XP
If the problem persists, follow the steps in the article.
How do I recover from a corrupted registry that prevents Windows XP startup
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756
-
After I shut down the computer, he re boots itself after 5-10 minutes.
After I shut down the computer, he re boots itself after 5-10 minutes. Weird. I tried to change the settings. Can anyone suggest anything?
Hello
1. How did you shut down the computer?
2. are - it stop with the power button on the computer?If so, this causes the computer in a standby / hibernation
If you shut down properly by clicking on start > stop, then you must wait until the computer is shut down before you close the lid of the laptop. -
After you have installed the ripple 0.9.4.1 I can't find a way laucnhing it
After you have installed the ripple 0.9.4.1 I can't find a way laucnhing, there is no program menu icons, not on desctop... nowhere.
What is the way of how correct installation?
I installed it on the D drive instead of c... but it's okay
PS. anyone can fix version on the main site, it says 0.9.1 but actual installed version is 0.9.4.1, it confuses everything team.
Open chrome.
In Explorer, navigate to:
C:\Program Motion\Ripple 0.9.4.1\ search
Drag ripple_ui.crx chrome.
Basically, see here:
-
HP 8600 printer range is found on the network after you have installed the Dymo 450 Turbo printer for processing of credit cards
Hello Christina,
1. What is the IP (Internet Protocol) address, the subnet and default gateway of the printer?
2 have you tried to Ping to the IP address of the printer?
Reset the printer can help get the problem solved.
Perform the steps mentioned below to get the address of IP(Internet Protocol), subnet address, and default gateway.
a: Type CMD in the search box start and press ENTER.
b: now, type Ipconfig/all and press ENTER.
Proceed as for Ping to the IP address of the printer.
a: Type CMD in the search box start and press ENTER.
b: type PING (IP address of the printer) , and then press ENTER.
Reset the printing system:
a: Go to System Preferences > Print & Fax
b: Right (or control), click inside the box that lists your printers and select Reset Printing System.WARNING- This will remove ALL your printers!
c: Select the sign more to add a printer. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.Click on the link mentioned below as reference.
http://Windows.Microsoft.com/en-in/Windows7/install-a-printer-on-a-home-network
Note: "Check the title that reads" set up a network printer "
Answer please if you have any questions.
-
"original title: NTA0104.dll.
whenever I re - start the computer I get this error: could not load the file nta0104.dll. How can I fix?
HM
Hello
Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes
http://www.bleepingcomputer.com/download/anti-virus/rkill
If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If the error persists after scanning use this program to out startup
This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.
-
I'm running an integrator system Windows 7 64 bit on an older system. What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?
Original title: Windows 7 OEM System Builder
I'm running an integrator system Windows 7 64 bit on an older system. What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?
Yes, you can reinstall Windows 7 OEM System Builder License on the new hard drive with the new processor.
It will not be a problem in this case, since you don't "move" installation, you are doing a new installation. The less it will take is activation of the phone, as you change the hard drive:
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us
Maybe you are looking for
-
How to find the card drivers Intel graphics for C satellite series?
Hello world! I have graphics HD Intel (r). I tried several times to install its driver but it never succeeds, it says modified Toshiba and I can't find the driver anywhere... Please help me, this is all the information on my graphics card:Graphics In
-
HP psc 2355 all-in-one: PSC 2355 all-in-one scan, but not print
The printer was purchased at a garage sale may be a few years back. It scans perfectly fine, but it will not be printed. I tried searching the Web for drivers and uninstalling/reinstalling it, even the installation under another pilot as series 2300.
-
I defragged my computer and now it tells me that my Windows Vista product key is incorrect
What should I do?
-
EOP printer should not be default, possible?
Hello We have activated EOP printer for the userers who access it via the Web portal remotely or at home. EOP printer works fine, when they connect to the default printer home House is also a default printer in the vdi. but when the user returns to t
-
Won't start at all. just a black screen. Only the satrts upward on safe mode
Won't start at all. just a black screen. Only the satrts upward on safe mode