I can't ping my own computer by using ping 127.0.0.1 why?

Similar Questions

• How to limit the number of printers can be installed on this computer by using Group Policy?

  How to limit the number of printers can be installed on this computer by using Group Policy?

  Hello

  Thanks for asking! If I understand correctly, you should limit the printers installed on the computer by using Group Policy. I suggest you follow the troubleshooting steps to check if this may help.

  The question you have posted is related to Technet and would be better suited to the Technet community. Please visit the link below to find a community that will provide the best support.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• I can't connect to the computer by using the password.

  Original title: windows 7 locked out after several incorrect attempts

  I can't connect to my computer toshiba satellite laptop after that my friend unsucessfully tried to guess my password. Now my password is not recognized and I couldn't connect to my own laptop... I have Windows 7 Home premium. I don't have a recovery disk or something like that. Help, please

  Thanks for the reply! The message I see is: "the user name or password is incorrect."

  I don't think that my password has been changed. I say this because I was the only person who knew the password. Thanks again for your help!

  If Windows says your password is incorrect, then your password is incorrect. Otherwise, he would say "locked." Here's how to get out of your situation. In light of your statement "I have a recovery disk or something like that." , you must pay close attention to step 8 unless you like taking big risks.

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before your problems began.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.

  If you do not have a CD to repair Windows (which is also essential to solve the problems of Windows as a pneumatic Jack is to change a tyre) then here are your options:
  • Burn it on another computer. It takes only three minutes!
  • Borrow one from a friend.
  • Purchase one here: http://systemdiscs.com/

• says printer can't communicate with the computer, but used to work

  also says: check the firewall settings to ensure dleacoms.exe is not blocked
  

  Hello

  In order to quickly provide a solution, please answer these questions:

  1. what version of Windows operating system is installed on the computer?

  2. What is the brand and model of the printer?

  3 did you do changes on the computer before the show?

  I suggest you follow the steps in the link to allow a program in the firewall.

  Allow a program to communicate through Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/allow-a-program-to-communicate-through-Windows-Firewall

  Note: By default, most programs are blocked by Windows Firewall in order to make your computer more secure. To work correctly, some programs may require you to allow them to communicate through the firewall. Before allowing a program make sure that you have got this information from a reliable source because it can affect the security of your computer.

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• I can not back up my computer, or use Windows Proformances system check

  When I try to back up my computer or let windows create a system image and save, it will only create the system image and I just get an error message, I think this all started when I started having problems with my (say unavailable event log)

  Hi Frederic,.

  Write to us with the following information.

  (1) what is the accurate/complete you get error when you try to perform a system image?
  (2) that monitor performance of the system do you want to?

  (3) do you have any third-party security software or antivirus installed on your computer?

  (4) did the problem started recently?

  (5) as 'use of Windows System performance check' what are you referring?

  (6) are you referring to any utility troubleshooting? If so, then what convenience store?

  You can follow the links below.

  Backup and restore

  http://Windows.Microsoft.com/en-in/Windows7/products/features/backup-and-restore

  What is a system image?

  http://Windows.Microsoft.com/en-in/Windows7/what-is-a-system-image

  Write the asked information. We will help you to come.

• How can I force a virtual computer to use a specific physical network adapter in a system with 2 network cards?

  I have a host with 2 network cards system.   I have a NETWORK card for the host computer to connect to my domain.  I have a virtual machine that is a deployment server Windows running Windows 2008 server.   The second NIC is to come and turn off the host machine and will then go to a CIsco 3550.   I need the server VM to use deployment only the second NETWORK card and does not communicate the 1st network card that the host uses.

  Can someone please help?  I'm new to VMware.   The original virtual machine on an esx server and was then converted to VMware server 2.

  Yes, just run the network on this host Editor as well.

• Can I print my own business cards using HP phtosmart?

  I have a HPC4500. Y at - it software to print business cards customized with a picture on them?

  Jugo,

  What I would recommend you do is to download the Avery Label Pro add-in for Word and use it. What we must remember what using it however, is change print you 8.5 x 11 borderless settings when printing. Otherwise, your business cards print about 1/4 inch, especially towards the bottom of the page.

  You can print on cardstock and cut out them yourself or use business cards Avery.

• How can I connect to a computer to use on another

  I have the setup of cloud on 2 of my computers. I now need a new. How can I connect to the far one to connect to the 3rd?

  Hello

  You can see the following link for creative cloud signature.

  Connect and disconnect activate Cloud Creative applications

  "Activation limit reached" or "connection error impossible ' with Adobe applications

• When a person built his own computer

  When a person built his own computer with parts of a company like Newegg, why is it so difficult to install an operating system from Microsoft?

  We are always able to help if more details are given. What happens now? No working Windows at all?
  How old is the machine, and what are the specs - cpu, motherboard, RAM and disk capacity, and

  Power supply brand and watts ?

  -If the machine is, say, five years or more I will not lose my activation of Win10 in this regard. Have your companion to reinstall sound

  dubious version of Win7, at least for the time being (does not advocate piracy. Just to check that the machine is in good health).

  I don't remember if this affects in fact Windows updates however. Your original message occurred when executing

  Windows updates? If installation of updates you want to avoid the update of "Get Win10" thing-a-me.

  This comes with the number of update - KB 3035583.  I would go on kb2952664 as well

  "and then frozen at the end and said my computer was bad, fix it."  "

  The exact wording of the error can help. Can be the key word, the error messages as many tend to be

  pretty generic. Off the cuff, I assume a problem with the HARD drive.

  -J' found in my brief (three days and return to Win7) flirtation with Win10 that he kept trying to 'fix' the

  HDD (four times in three days) that I used for the 10 experience, but he did Chase.

  Another poster I was talking about was having a similar problem with WIN10. I'll try 10 on a newer version

  Drive HARD, but was already exhausted by the ordeal and I returned the my Win7 disc (PC can be like that).

  "I guess that I am cut too many corners and should stick with giants like 'Dell'". "."

  No! Please, I beg you! Not the Giants! D

  You only cut too many corners so your processing power machines is less than your needs.

  DELL reference studies right corners down.

  -If the current machine is new and requires only a new component, stick with it may be viable. If it isn't...

  Search current parts, order parts, read a few tutorials of the Assembly and assemble your own.

  It is not too difficult (connections on the front panel can be the cause of some confusion ) Just exercise care and attention and the result is a machine equivalent to a price lower than the OEM.

  Not wanting to? No worries, buy a DELL. They are good, especially if you do not play high-end Games PC.

  Power CPU and RAM capacity are so high these days that you can get on a low end machine, wouldn't it

  do common tasks such as the internet, the business running or emissions or hobby level Photoshop or

  Audio editing.

  -My first machine ('03?) was an ex-company DELL. And like a lot of this kind of

  PC, he was a bit overwhelmed, and the price ($500 AUD) for what was, at the time where I bought it,

  but he survived a year with me and a couple of years with a friend who I sold it ($ 100).

  I am an avid player and the DELL was not really up to it, so I set up my first game machine,

  and have not looked back.

  .

• How can I check to see if a used iPad was stolen?

  How can I check to see if a used iPad was stolen?

  Why do you think it could be stolen? Ask the seller to clear the Apple ID and password. If the seller is unable to do this or said that they forgot the information, then it might be stolen. If you have any concerns about this, don't buy it.

• Can't edit my own posts Facebook photo?

  I can edit my posts that I agree with others, but I can't edit my own Facebook posts where I post my photos to my computer on Safari on Mac OS X 10.11.2 9.0.1.    This bug has been fixed with 10.11.5?  Java and Flash the latest are installed.  Has never been a problem in 10.7.5 or 10.10.4.

  a brody wrote:

  I can edit my posts that I agree with other people, but I can not edit my own Facebook posts where I post my photos to my computer on Safari 9.0.1 on Mac OS X 10.11.2.    This bug has been fixed with 10.11.5?  Java and Flash the latest are installed.  Has never been a problem in 10.7.5 or 10.10.4.

  I don't have a problem of shared editing post I did on FB and I am running 10.11.5

  or my own post using Safari.
  

  I think to edit shared, you must go through your page, do not to the General timeline.

  Fact is that I've never had this problem on one of the OS X including 10.11.0

• I can't connect to my computer it says only: the user profile failed

  I can't connect to my computer in almost all of my accounts. I had to wipe my computer and start all the accounts, but I can only connect to my own account that is an administrator ACC. 3 other accounts (2 admins and standard user) just say faliure of user profile and not let me not sign on them, please help! Also im not a computer genius so understand not shortened down the names and certain clauses.

  I can't connect to my computer in almost all of my accounts. I had to wipe my computer and start all the accounts, but I can only connect to my own account that is an administrator ACC. 3 other accounts (2 admins and standard user) just say faliure of user profile and not let me not sign on them, please help! Also im not a computer genius so understand not shortened down the names and certain clauses.

  This tutorial or related links may be able to help:
  Carefully read each options.

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  t-4-2

• can't conect on another computer

  I have PC HP 2309 m and I am using windows 7 I can't conect on another computer

  I need to know why? I have the adapter and share this with another computer by router conect

  This is problem for 2 weeks

  How can I solve this problem?

  You are trying to share files between a Vista computer (since you posted in a forum of Vista) and a Windows 7 machine?

  The Vista network type must be set to 'Private' and the Windows 7 network type must be set to "Home" or "work".

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below). The Vista network type must be on "private". "Public" is for when you are connected to an Internet connection 'foreign' as an Internet café, at Starbucks or a hotel, etc.

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the Windows Firewall. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  (C) in Vista, turn on password protected sharing. In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  Create accounts of users and corresponding passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  XP - set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  Vista - Start ORB > Search > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.

  MVP Jack's Web site is a great resource for troubleshooting networks: http://www.ezlan.net/index.html

  MS - MVP - Elephant Boy computers - don't panic!

• When we sell our software we want to remove our volume licensing, the buyer can apply to their own license. This procedure is possible?

  * Original title: Volume License

  The company that I work uses several virtual machines of windows volume licenses.  When we sell our software we want to remove our volume licensing, the buyer can apply to their own license.  This procedure is possible?

  Yes, just remove the virtual machines.

  You can even uninstall the product key.

  Click Start, type: CMD
  Right-click on CMD
  Click on run as administrator
  At the command prompt, type: slmgr.vbs - upk

  Press enter, this will uninstall the product key of the computer and to the evaluation mode, you are now free to use it on another computer.

• How to re - install Windows when I can't log on my computer?

  I set a password for Windows 7 and I have no other accounts other then my own, which is administrator, so I can't do anything and I would like to know how can I re - start my computer, or re - install windows, I don't care if it is deleted, I just want the computer back! Thank you very much for your help!

  See the tips of I lost my password and do not have a disc to reset. What can do?