Install root.sh grid questions

Similar Questions

• Code 646, cannot install dates. The question of liciense agreement is not required.

  Code 646, cannot install dates. The question of liciense agreement is not required.

  Try this FixIt:
  Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates

  http://support.Microsoft.com/kb/2258121 "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• I have a toshiba laptop which has google chrome. The laptop has already installed adobe. My question, my computer will support creative cloud so that I can use Photoshop and Illustrator? Thank you

  I have a toshiba laptop which has google chrome. The laptop has already installed adobe. My question, my computer will support creative cloud so that I can use Photoshop and Illustrator? Thank you

  Hi Julie

  You can check the minimum specifications here:system requirements | Cloud Creative

  Kind regards

  Guinot

• Install PT8.53 Linux question: startPIA.sh cannot run the WebLogic Server

  
  People,

  Hello. I install PeopleTools 8.53 with the server database Oracle 11 GR 1 material and OS Oracle Linux 5. Data Mover Bootstrap and application designer can connect to the instance of database successfully. About PIA, Oracle Database Server and Application Server Tuxedo11gR1 runs correctly. But when to start WebLogic Server in the opt/PT8.53/webserv/PT853/bin directory, I get an error message like below:

  [user@userlinux bin] $./startPIA.sh

  Try to start WebLogic Server PIA
  No activity will be connected to this window.
  Activity on the server will be connected to /opt/PT8.53/webserv/PT853/servers/PIA/logs/PIA_*
  PID for WebLogic Server PIA is: 5462

  According to the site Internet of Nicolas http://gasparotto.blogspot.com/2010/02/web-server-weblogic-11gR1.html, I did 2 things like below:

  
  First of all, in the setenv.sh file, I changed MAX_FILE_DESCRIPTORS to 4096 to 1024.

  
  Secondly, I added the last 4 lines in the /etc/security/limits.conf file as below:

  # - nice - max great priority has led to increase of
  priority realtime max # - rtprio -
  #
  # < domain > < type > < item > < value >
  #

  soft #* coeur 0
  #* rss hard 10000
  #@student hard nproc 20
  #@faculty soft nproc 20
  #@faculty hard nproc 50
  #ftp hard nproc 0
  #@student - maxlogins 4

  # The following lines are added by me

  WebLogic - nofile 65536
  WebLogic - nproc 65536
  WebLogic - unlimited core
  WebLogic - memlock 50000000

  # End of file

  
  I have restart startPIA.sh and get the same error message:

  Try to start WebLogic Server PIA
  No activity will be connected to this window.
  Activity on the server will be connected to /opt/PT8.53/webserv/PT853/servers/PIA/logs/PIA_*
  PID for WebLogic Server PIA is: 5462

  
  My question is: any folk cannot resolve the error above to start the WebLogic for PIA Server?

  Thank you.

  As Nicolas says that you cannot start PIA on ports below 1024 on Linux with a non-root users.

  Recreate your PIA assembly and affect others like 8000 and 4443.

• Install the control Grid on Solaris

  Hi all
  
  I try to install grid control 10g release 4 on my Homer of the database.
  
  She bounces back with an error:
  ==========================================================
  Checking Installer requirements...
  
  Checking the operating system version: must be of 5.8, 5.9, and 5.10. real 5.9
  Past
  
  Check the Temp space: must be greater than 250 MB. Real 4279 MB passed
  Check the swap space: must be greater than 500 MB. Real 5542 MB passed
  Monitor: must be configured to display at least 256 colors failed < < < <
  > > > Could not execute auto check for display colors using command/usr/openwin/bin/xdpyinfo(1). Check if the DISPLAY v
  ariable is defined.
  
  Audits of the requirement has failed. You must meet these conditions before
  
  continue with the installation, after which he will be again checked.
  
  Continue? (y/n) [n]
  =============================================================
  I tried searching in the otn & metalink. was not able to find solutions.
  
  concerning
  Susan John

  Hi Susan

  You are using an X 11 emulator as Exceed?

  Or let me know if you use another X 11 emulator.

  then try this:

  Description of the solution
  --------------------

  Exceed 6.0.1:
  -Run Xconfig (Start-> programs-> exceed-> Xconfig)
  -Double click on "Video".
  -Set
  Visual server: Pseudo-couleur
  -Reset the server as proposed by Xconfig

  Exceed 7.1.0:
  -Run Xconfig (Start-> programs-> Hummingbird Connectivity V7.1-> exceed-> Xconfig)
  -Double-click on "Definition of screen '.
  -Set
  Visual server: Pseudo-couleur
  -Click OK
  -Double-click on "Protocol".
  -Uncheck "Use 32 Bits per Pixel for TrueColor"
  -Reset the server as proposed by Xconfig

  Otherwise directly on Solaris, please check that:

  Check if the monitor has minimum of 256 colors.

  Run the following command from the operating system command line

  COLOR ='/ usr/openwin/bin/xwininfo - root 2 > & 1'
  If [' echo $COLOR | grep-i depth | awk ' $2 > = 8 {print 'good'}' | grep 'good'-c '-ge 1]
  then
  echo "Adequate."

  Elif test - z "$DISPLAY."
  then
  echo "DISPLAY is not defined.
  Elif [' echo $COLOR | unable grep | wc-l '-ge 1]
  then
  echo "Cannot open DISPLAY".
  on the other
  echo "need to at least 256 colors.
  FI

  Published by: Hub on October 29, 2008 23:50

  You are able to use

  / usr/openwin/bin/xdpyinfo(1)

  What is the output of this command?

  You are able to open xterm or xclock with no problems?

  Published by: Hub on October 30, 2008 12:00 AM

• GTA IV is impossible to install! two different questions!

  were already 'installed' game but does not start.

  so I click on the CD and it begins to start. Then a white pop up screen says "Grand theft auto IV is put in place.

  "Welcome to the grand theft auto iv installation process. Grand theft auto iv pc requires installation of the software, including social club of rockstar games, sony DADC SecuRom, adobe flash, microsoft .NET framework, games for windows live, internet explore and direct x. To play GTA IV online, you needand account with all two windows live and social club of rockstar games. to review the software requirements and information, please visit www.rockstargames.com/support
  * bottom of pop-up (two buttons)
  1 Social Club.) launch
  (exit 2).
  I click on launch social club
  3 things can happen
  1.) nothing
  (2.) it brings me to a black pop up screen that looks like the screen prompt command followed by an error message "error ws10 fatal."
  3.), it brings me to the social club where I can press play but nothing happens.
  I need a walkthrough COMPLETE including the resettlement of the disc. (no steam)
  Thank you and I hope that I have been descriptive enough

  Yes, GTA4 was the worst conglomerate of DRM never, until that time.
  -You need not log in to the Social Club. I'm not positive, but I don't think that it is still running.
  -You want to patch the game, but I do not remember how, so check with the forums
  specific to GTA4 to see if you should go beyond say patch 1.5.
  -The 1.5 patch, I thought was supposed to remove Social Club, but I still have the pop-up window
  before I tell him to go away.
  -The game also needs a fix for GFWL.  I think remember me stuffing things GFWL upward and obtaining of
  the fix is fairly common. GTA4 modding sites have a fix called xliveless.dll for this.

  -If you have a graphics card with / 3GB (maybe 2 GB) or more of RAM you must also create a file to force
  the game to accept this time has evolved and is more than 1 GB VRAM on video cards
  possible. It is a command line text and it goes like this.
  Open Notepad and type (or copy and paste) the following-
  (adjust the first two native resolution on your monitor if you want).

  -width 1920
  -height 1080
  -nomemrestrict
  -norestrictions
  availablevidmem - 6.0

  -Save as commandline.txt and place it in the main installation directory of games with the GTA4.exe.
  You may not need the trouble resolution with the command "nomemrestrict", but that the...

  If you are installing somewhere other than the default location - Program Files (x 86) - it can help.
  It is generally more beneficial to avoid permissions issues, but it can sometimes help with
  other questions.
  Another partition or a drive HARD is good, but a new folder in C:\ with your games installed in their own
  subfolders is OK too.

  Specific GTA4 forums can produce more suggestions.

  .

• Entrust to install root certificate

  I'm setting up my 7.2 (9) ASA 5520 to use WebVPN to access a Citrix presentation server and closes. I ordered and installed an Entrust Certificate. Now, I have to add the root certificate. When I try, the ASA invites me for a serial number. I tried to enter the serial number and the ASA answers she wants the SN in hexadecimal.

  What is a procedure to follow to install a root certificate with the CA signed cert Entrust?

  To use mutual Group authentication, you need a root certificate that is compatible with the central-site VPN installed on your system. Your network administrator can load a certificate root on your system during installation. When you select the mutual Group authentication, the Client VPN software checks if you have installed a root certificate. If this isn't the case, it asks you to install a.

  http://Cisco.com/en/us/products/sw/secursw/ps2308/products_user_guide_chapter09186a008031f1b2.html

• 11.2.0.1.0 grid questions

  I was installing 11.2.0.1.0 grid Infrastructure, but he came to the conclusion that it does not work on Oracle Linux 6

  Are a lot of discussions about this, but all of them are archived.

  But I don't understand the solution. It says to download 11.2.0.3.0 patch. Yes, logic.

  But it's the 11.2.0.3.0 regular patch of the database? Thus grid Infrastructure 11.2.0.1.0 is a separate download and any higher version 11 g of GI, is included in the normal database software?

  Cbtv-Oracle wrote:

  I was installing 11.2.0.1.0 grid Infrastructure, but he came to the conclusion that it does not work on Oracle Linux 6

  Are a lot of discussions about this, but all of them are archived.

  But I don't understand the solution. It says to download 11.2.0.3.0 patch. Yes, logic.

  But it's the 11.2.0.3.0 regular patch of the database? Thus grid Infrastructure 11.2.0.1.0 is a separate download and any higher version 11 g of GI, is included in the normal database software?

  At home, I have 11.2.0.1 running on EL 6.5 with no problems. For the 11.2.0.3, there will be several downloadable files and I guess, the number 3 and 4 are no doubt IM downloads. So if you have access to MOS, download from here.

  Aman...

• Grid Question of K2 (vSGA / vDGA)

  Hi guys,.

  I have a few basic questions about the card grid K2 and their deployment vSGA / vDGA

  We have a lot of 5.5 equipped 2 physical VMware graphics acceleration of NVidia type K2 GRID cards.

  If I go on the PCI device settings of the vmware host, then I see 4 four pci devices to allocate to the virtual machines:

  

  Now, I am a little confused because I though that I could devote only a single physical grid K2 card to a virtual machine via vDGA.

  Why I see four devices? These are the cores of Kepler (2 per card K2). I tried to run 3 VMs (each with one assigned grid K2 unit), and it worked.

  How many virtual machines I could if I use vSGA deployment of two grid K2 physical cards?

  I also see a bug. If I allocate a virtual machine to a network K2 device, then I can no longer connect to the virtual machine using the vmware console, is this normal?

  The standard vga adapter is always present in the virtual machine. I just see the Windows 7 boot screen.

  Best regards

  Viktor

  Hi Viktor, and welcome to the VMware communities.

  You're right, every K2 have GPU:s 2, each GPU can be dedicated to a guest in your case, you can use 4 comments with dedicated GPU:s

  How many virtual machines I could if I use vSGA deployment of two grid K2 physical cards?

  It depends, with vSGA you are limited to the amount of RAM. On K2, you have 8 GB of memory on each map, you can maximum have 512 MB for each guest and half will come from the graphic ram. So, in this example with your config, you'll be able to start the 64 comments but the practical limit depend on the request of the guests.

  I also see a bug. If I allocate a virtual machine to a network K2 device, then I can no longer connect to the virtual machine using the vmware console, is this normal?

  Yes this is normal when you use vDGA, you can use RDP or VNC in the case where you need to administer the virtual machine outside the PCoIP session.

  Linjo

• Install HRCS9.0 Linux question: the application designer and Tuxedo domain Boot have SQL error

  People,

  
  Hello. I was installing HCM and Campus Solution 9.0 with PeopleTools8.53. Server machine is Oracle Linux 5.10 and Windows XP-based client computer.  The architecture of my internet is WebLogic11g/Tuxedo11g/OracleDatabase 11 GR 1 material. PeopleTools 8,53 works correctly in the browser.

  In the database server Oracle Linux 5.10 machine, I run scripts 'createdb10.sql, utlspace.sql, hrcddl.sql, dbowner.sql, psroles.sql, psadmin.sql and connect.sql' one by one. Can I use Data Mover to load Windows XP data into the Oracle Linux 5.10 DB HRCS90 instance. The Data Mover script hrcs90ora.dms is done correctly in Windows XP. Configuration Manager is configured correctly.  But when I login in the application designer, I can't connect and get the message as below:

  
  «Security Table Manager (Get): the database is release 8.52.»  The PeopleTools running require databases at 8.53 release. »

  
  I followed the http://docs.oracle.com/cd/E37306_02/psft/acrobat/PeopleTools-8.53-Upgrade_02-2013.pdf document to upgrade HCM and HR 9.0 revision 5 Database Instance HRCS90 in Oracle Database Server with Linux. My upgrade is complete. The above problem is solved.

  When I login in the application designer in Windows XP, the error message as below:

  File: E:\pt853-903-R1-retail\peopletools\src\pssys\stmget.cpp SQL error.

  Stmt #: 2539 error Position: 26 back: 904-ORA-00904: "OPERPSWDSALT": invalid identifier:

  Fail SQL Stmt:

  Select the VERSION, OPERPSWD, OPERPSWDSALT, ENCRYPTED, SYMBOLICID, ACCTLOCK from myAccessId.PSOPRDEFN where OPRID =: 1

  When I boot the Tuxedo Application Server Domain HRCS90 under Linux, I get the same error message as below:

  File:/VOB/PeopleTools/src/pssys/stmget.cpp an SQL error:

  Stmt #: 2539 error Position: 26 back: 904-ORA-00904: "OPERPSWDSALT": invalid identifier:

  Fail SQL Stmt:

  Select the VERSION, OPERPSWD, OPERPSWDSALT, ENCRYPTED, SYMBOLICID, ACCTLOCK from myAccessId.PSOPRDEFN where OPRID =: 1

  ... ...

  GenMessageBox (0,0,M): Signon database: could not access the HRCS90 database with user Psalm code

  I checked the PSOPRDEFN table in the database Linux HRCS90, not the OPERPSWDSALT field.

  I also checked the connection process PS the user traverses the 3 tables: PSOPRDEFN and PSACCESSPRFL, PSSTATUS.

  My oprid, the symbolicid and the accessid ownerid in the 3 tables are correct.

  My question is:

  Why is there a strange OPERPSWDSALT field in the SQL statement that causes Signon failed?  How to solve the problem of access code?

  Thank you.

  > Then it connects with SQL > and then run script rel853.sql, but its outcome is not just because the database is started with sysdba.

  The database is always started '' as sysdba. '' "Useless" to connect as sysdba to run the PSoft script while accessid.

  You need to come back in the book of the Oracle.

  Fair enough, this is my last word to this thread.

  Nicolas.

• Install PT8.53 Linux question: NetMgr Windows and Linux NetMgr

  People,

  Hello. I install PeopleTools 8,53 Internet Architecture. Database server is Dabase Oracle 11 GR 1 material. Operating system is Oracle Linux 5. I installed successfully JDK7, WebLogic Tuxedo 11 GR 1 material and PeopleTools 8,53 10.3.6, in Oracle Linux 5.

  
  I've been setting up of database PeopleTools8.53. Because the Wizard installation problem, I created PeopleTools 8,53 database manually by using starter PT853 Oracle database instance. I have run the following scripts:
  (1) utlspace.sql
  (2) dbowner.sql
  (3) ptddl.sql
  (4) psadmin.sql
  (5) psroles.sql
  (6) connect.sql

  
  Then, we perform Data Mover script in a Windows Client computer to fill the PeopleTools PT853 database machine Linux Sever instance. I installed Oracle Database 11 g 2 client for 32-bit Windows XP 64 - bit Windows virtual machine. Now I face the problem of connection of the VMs 2 as below:

  In Manager Net Linux Server Machine:

  Service name: PT853
  Connection type: default database
  "TCP/IP Protocol".
  Host name: localhost
  Port name: 1521

  Listener: LISTENER
  Protocol: TCP/IP
  Host: localhost
  Port: 1521

  I test the Service PT853 with "SYSADM" username and password "SYSADM". The connection is successful.
  In the Windows Client computer, the information in the Net Manager is the same, but the connection is not successful. Its details are as below:

  NET Service Name: PT853
  Protocol: TCP/IP
  The database Machine host name: localhost
  Port number: 1521
  Name of the Basic Service: PT853
  Connection type: default database

  I have test the Service using "SYSADM" UserID and password to 'SYSADM' which are the same with Linux, but this error: TNS: listener does not currently of service requested in connect descriptor.

  My questions are:

  Do we need to do something for you connect Windows XP with Linux first? If so, how? If not, how to solve the problem above?

  Thank you.

  Seriously, you have to start somewhere and learn the fundamentals of networking. 75% of your questions are not related to PeopleSoft, they are only asked for an installation of PeopleSoft.

• installed windows 7, now question about bluetooth NIC

  So, I deleted the installation of vista factory, formatted hard drive and did a clean install of win7 64 bit. Now, I find myself trying to pair a headset stereo bluetooth to my system, after an investigation that he won't, I searched in which nic card I have and original SWSetup installed at the factory of SP39805 file (from vista) but I can't tell if its broadcom, intel or Realtek. How can I know which driver to install, now my seeems wireless to work properly (althoiugh, I'm green at this) with the program of intel, but my bluetooth headset seems pair well, but I cannot hear through the headset and looking for solutions. I think this might be the problem, although in the IDT audio control panel is difficult to grasp as a whole to the top of my helmet, but I need to start somewhere.

  DV7 - 2173cl

  Any thoughts muchly appreciated.

  Ken

  I'll wait a few pictures in the show HP after all this.

  I hope that after all this, that your headphones will work.

• Pavillondv6-6c50us: Re-install windows7 on the question of the laptop

  My laptop OS when buying: Windows 7 (64-bit)

  I have installation disks.

  Recently installed VMWare ESXi hypervisor on this laptop to test something. This erases everything, including Windows-7 on this laptop. Now got my tests. You want to reinstall Windows-7 from installation discs and not have ESXi.

  There is no boot menu options! How to install Windows 7? Experts, please help.

  Rigorous-

  The PRESENT DOCUMENT explains 'How to' of the recovery Partition or the set of recovery disks.  Assuming that's what you mean by "I have installation disks.

• need to re - install &#60; root windows &#62; \system32\ntoskrnl.exe

  My computer does not load Windows. I use XP Professional Sp3 (I think). My drive is XP Professional SP2.

  When I try to boot from the cd, I finally get to a screen that gives me the Windows installation press options 1) enter or 2) to repair XP using the recovery console. Press r.

  No matter which option I choose, I get the message "implementation did not hard disk drives in your computer."

  I pressed F8 and used the "disable auto reboot" and received the message "Windows has not start because the following file is missing or corrupt: \system32\ntoskrnl.exe please reinstall a copy of the above file"

  How can I do this?  Thank you, the Safi

  Shouldn't you have the following option under integrated peripherals:

  On Chip IDE - SATA Controller [SATA, RAID or off]

  You don't want RAID!

  You should be able to select SATA and then SAVE the changes that you exit the BIOS (sometimes people forget this step!).

  Not all mobos have the ability to disable sata ahci. The sata/raid controller driver is needed for windows recognize the drive sata hard. Having the pilot does not mean that you have to configure or use the raid features. RAID is simply two working as one of the hard drives. Most of the drivers manufacturer mobo that I take care of combine sata and raid drivers for the controller in a single package. Here is an example of a driver for Intel Matrix Storage Manager. It is a common driver needed for Windows to recognize a disk sata hard connected to a motherboard Intel. If the options as shown in the above post by Jose do not appear in the bios then install drivers, as I said. For this reason, Windows gives you the opportunity to press F6 to install the drivers before the implementation.

  Intel(r) 82801ER SATA RAID Controller
  PCI\VEN_8086&DEV_25B0&CC_0104=%systemdrive%\drivers\MSD\IMver5\iastor.inf; I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• Grid Question

  Hi all!

  I am running Oracle Enterprise Manager Grid Control and there are a bunch of tables that the Manager automatically creates, I need documentation on those tables that I need to get some information regarding an APEX application. Could someone help me?

  Thank you!

  Hello

  Please see the doc below for more information on the use of the views of MS repository. Note that querying directly the EM tables is generally not recommended (especially to avoid performance problems).

  Using views of repository management

  Kind regards

  -Loc