Install several instance of W7 using the restore disc

Similar Questions

• 110 - 000z: how to use the restore disc I burned

  I burned 4 discs of recovery from my pc. Now, I need to use. Could someone show me how to start them on my pc. what I have to do.

  Here's the ths bases of performing a HP system recovery

  http://support.HP.com/GB-en/document/c03489643

• Want to downgrade from Windows 7 to XP using the upgrade disc

  I installed windows 7 on my laptop. Many problems. Tried to re - install Windows xp with a upgrade version, but will not recognize windows 7 upgrade to xp. How to re-install xp with a upgrade disk.

  * original title - replaced with win7 winxp. have xp updated but will not be installed with win7. How to make xp back on computer

  Hi Allen,.

  You will not be able to install XP on Win 7 using the upgrade disc. You will require your original operating system disk and you will have to boot from the OS installation disc, once installed you can use the disk to upgrade XP on this operating system. Another way is out to install your system disk and the boot of Winxp.

  I hope this helps.

• Satellite M70: Question on registration after using the restore CD?

  I have reinstalled the OS on my 70 M satellite using the restore CD and now system even once asked me to register with Microsoft and Toshiba. I've already done, so I jumped it. I just want to ask if I use the recovery CD, I have to register again with Toshiba and Microsoft, or is not necessary.

  Hello

  You n t need to save anything when installing Toshiba recovery image.
  The Toshiba recovery image is already out.
  You can register your device on the Toshiba site for more support, but this procedure has nothing to do with the recovery image record.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=000000147a

• I lost the disc to restore my phone and it is no longer supported by the manufacturer. Can I use the installation disc for my desktop with my laptop serial number?

  I lost my laptop computer restore disc and it is no longer supported by the manufacturer. Can I use the installation disc for my desktop with my laptop serial number?

  My title says it all. I have an old HP laptop that they do not send to restore the disc more (I don't know yet I had one; his old laptop from my brother) and I have an installation disc for my new PC. I have a Windows XP Home edition SP2 installation disc. However, as the hard drive of my laptop broke down, I don't know what version of windows it was. I think it should have been an OEM version and the sticker says it was Windows XP Home Edition.

  Now, anyway I tried to install my installation on laptop computer disc, offering series of laptop computer but now it asks me to activate. Will it work if I activate it?

  Thank you

  Unless you are lucky enough to know someone who has a generic OEM drive, which you can borrow, I don't see a practical solution for you.  I advise you to spend the money to buy one, even if you could find one to buy from a reliable source (not eBay!).  Although a generic OEM disc should work with your product key, there is no guarantee that it will work with your product key.

  If your laptop can be retrieved through a restore partition, and you can't borrow a disc that will work with your product key, then you have pretty much exhausted all reasonable or practical options.

  I finally did! I borrowed a copy of a generic OEM drive, through activation and it is!

  Thank you much for the help...

  Now I've done could you help me more? Say now, I returned the drive OEM back (don't want to make an illegal copy) and want to be able to use my current system installed to generate a system disk that will allow me to avoid all the problems I've had up to now. What would you recommend? I've read a few articles on other forums (I did some research!) but is a little confusing. I hope you could help.

  Thank you

  @Carey Frisch - positive Get... you want to help here not only your view of what I would do with my money!

• How can I copy bookmarks from another PC without using the restoration is not to lose the curtrent PC each

  I want to copy favorites from another PC, do not use the restore function inorder does not remove bookmarks on current PC

  Export to a HTML file, and then import the HTML file to the other computer, which will add bookmarks to existing ones.

  • https://support.Mozilla.com/kb/exporting+bookmarks+to+an+HTML+file
  • https://support.Mozilla.com/kb/importing+bookmarks+from+an+HTML+file

• I can't access my windows management instrumentation software in order to use the restore of the system because some of my files of windows management has been moved or is missing. where can I find them

  I can't access my windows management instrumentation software in order to use the restore of the system because some of my files of windows management has been moved or is missing. where can I find them that I just want to be able to use the system restore and information system.  Thank you

  Hello

  What is the full and exact error message?

  Check if the article below or the thread will help.

  How to use restore system with Windows Management Instrumentation in Windows XP
  http://support.Microsoft.com/kb/295299
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/my-WMI-file-is-missing-i-am-running-Windows-XP/86242cad-ee5a-E011-8dfc-68b599b31bf5

• Custom install of windows7 32-bit XP 32 bit using the new disc of MS

  Trying to do a custom install of windows7 32-bit XP 32 bit using the new disc from Ms.  27% of the expansion of the Windows files I get msg "installation has been cancled that Windows does not prepare the computer to start the next phase of the installation."  I restarted 4 times with the same result - help

  Could you provide your system specifications?

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

• Vista asks to activate and insert the restore disc. SE message at the bottom of the screen: "this copy of Windows is not genuine".

  Original title: corrupt Windows Vista

  I have vista business and I think he got corrupted when I went overseas. Now it asks me always to activate and insert the restore disc but I've mislaid and cannot locate my restore disk. Also on the bottom, it indicates that this copy of windows is not genuine? Please help anyone on how I can restore this back to the original.

  Thanks in advance for any help.

  Hello

  There are several methods to reinstall Vista.

  See which way suits you.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• error code cooD11BA... lost all my audio after I used the recovery disc 4

  I lost all my audio after using the recovery disc (4). COOD11BA error code

  Hi fluffy444,

  Step 1: We recommend first to install the sound card driver and check the result.
  a. check the sound card manufacturer or system to download the driver.
  b. Once you have downloaded the correct driver for your windows, install successfully.
  c. restart the computer and check the result.

  Step 2: If the problem persists, try running the troubleshooter from his Microsoft and check the result
  a. see How to fix the sound problems in Windows XP
  b. click Microsoft hotfix and run the tool successfully.
  c. follow the instructions on the tool and check the result.

  See also: Troubleshooting Audio in Windows
  

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I insert my recovery disk its Blanck, but if I used the same disc in another computer I can see the content inside

  Original title: DVD RW drive

  I'm having a problem with my computer toshiba M645. When I insert my recovery disk its Blanck, but if I used the same disc in another computer I can see the contents inside. I try inserting the disk dvd movies and it will play normally. Please give me help with this problem because I want to get my phone to the sound out of the box state. Thank you.

  Hello

  The drive came with the laptop or you did it yourself in the recovery Partition?

  And you're supposed to boot from the recovery disc to start the recovery process.

  You change the Boot order to make the CD/DVD drive first in the boot order. Then, you start from the disc.

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  And as a way to re - install with most of the Toshibas, you press 0 (zero) to start to start the process of recovery back to settings factory (new State) of the recovery Partition.

  See you soon.

• I just downloaded Creative Suite 6 on my new MacBook and not only the interface seems a bit different but I noticed that the oil paint filter is not available.  I used the same discs on my office iMac and the filter still works there.

  I just downloaded Creative Suite 6 on my new MacBook and not only the interface seems a bit different but I noticed that the oil paint filter is not available.  I used the same discs on my office iMac and the filter still works there.  I use it often and would appreciate any help to recover!

  Please download and install Photoshop CS6 from the following link: download Creative Suite 6 applications

• Can I use the same disc hard ext I used for El Capitan Yosemite without losing my data?

  Can I use the same disc hard ext I used for El Capitan Yosemite without losing my data?

  Yes. You should not lose any data, but always have a backup. In this case, you have your internal drive as a backup.

• File corrupted on the restore disc.

  My restore disk has a corrupted file. The file is ISSetup.dll. It is Macrovision and version 12.0.0.58851. I don't particularly want to buy a new set of disks, if anyone has this version of the file that they could email me? It is of my HP Pavilion Slimline S3431.uk. The exact location of the file is D:\hp\apps\APP11568\src.

  Thanks for your help.

  Chris

  I hope that you don't have to pay for the record

  Since that she may not have properly burn the disc

  correctly

  but the creation of restore disks is a time

  burning and good for making copies

  and even if isn't properly without you probably burn

  know that the rest is bad too

  but once you get the restore disc sent to

  make you a copy for insurance

  and you mine to give a scenario

  My cat scratched the OS disk and

  to reinstall was unnecessary and

  has no luck with it, but now with these

  Windows disk is protected against copying I doubt

  You can make a backup copy

  but once you've made a copy of the restore disk

  and place your original in a course

• Im trying to install my first than Pro CS4, the first disc installs fine but the 2nd disc refuses to install. I have searched a downloadable version, but can not find a. any ideas how I can actually complete installation?

  Im trying to install my first than Pro CS4, the first disc installs fine but the 2nd disc refuses to install. I have searched a downloadable version, but can not find a. any ideas how I can actually complete installation?

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  - and also read https://forums.adobe.com/thread/1146459