Install support for older versions of Oracle (10 g 2)

Similar Questions

• Error messages when you try to install Illustrator 9.0 and 10.0 Illustrator high grade to a new Dell Windows 10 laptop. However, my Photoshop 7.0 have loaded successfully. The Adobe site has no information or no support for older versions of Illustrator w

  How to load load Illustrator 9.0 and Illustrator 10 drives on the new Dell Inspiron 15 5000, Intel Core i3 laptop? I have an an error message for each disc. I get to the automatic loading screen, but it's where everything stops. I was able to load my Photoshop 7.0 disk correctly. The Adobe help site has proved to be useless at best to address this issue.

  If your goal is to get the installed updated version you need not to install the previous version.  When you go to activate the upgrade it will ask you to provide the serial number of the version previous qualification.

  If your discs continue to be a problem you can try to download the installation files instead.

  Download and Installation Help-
  https://helpx.Adobe.com/download-install.html

  http://www.Adobe.com/downloads/other-downloads.html

• How do we install support for labview 2012 sp1 64-bit

  Hello

  I downloaded and installed Labview 2012 sp1 64-bit and

  the installation requires a drive support.

  Where can I download a dvd for 64-bit Labview support?

  Thank you

  desiko

  You must install the drivers again so that it will install support for the 64-bit version of LabVIEW.

• OfficeJet 4635 cancel the firmware update because my ink cartridges are for older versions of the product

  I was happy with my officejet 4635 until I clicked on ok to apply for the HP firmware update. He said that it would improve my printer. However, demand has not said that my ink cartridges may not work if I installed the update. I clicked on ok and the update has been successfully installed. Now I can't print anything because I get an error message saying the I have ink cartridges are designed for older versions of the product. I do not use the new HP cartridges because they cost too much. I used cartridges refilled abacus in Az. Phhoenix which worked fine up until I did the update of the firmware of HP. I need to go back to the old system, so I can print again. I am connected to a desktop computer HP envy running windows 8.1. I'm furious HP to try and force you to buy their new cartridges with an update of something. I think that whoever came up with this update should be fired. Any help with a solution would be appreciated.

  I was told that there is no way to undo the update of the firmware. HP did send me a few ink cartridges so I could print again, but I am still ticked about the way this has been ensured by HP. They have not told me that my old version cartridges would not more work after updating firmware. I think that it is simply dishonest on part of HP and I am sure that other customers have been captured by this update of the firmware. I am sure it was a HP effort going to force you to use their new cartridges. I'll be very careful on the acceptance of the updates from HP in the future.

• I'm trying to reinstall Illustrator CS4, Photoshop, and InDesign on my new Mac.  It does not accept my serial number.  Adobe called they told me that they do not provide support for older programs and has sent me a link to here.  Can someone guide me?

  I'm trying to reinstall Illustrator CS4, Photoshop, and InDesign on my new Mac.  It does not accept my serial number.  Adobe called they told me that they do not provide support for older programs and has sent me a link to here.  Can someone guide me?

  If this is an upgrade, you must the cs4 and the serial number of versions eligible.

  Make sure you use the correct installation file that corresponds to your serial number, error: "serial number is not valid for this product". Adobe Creative Suite

  In addition, How to open third-party developers not identified in Mac OS X applications ' Mac Tips .

• A support for Acrobat version is not found...

  When I try to PDF a page in Chrome I get this message: "a support for Acrobat version was not found. Please install or upgrade to Acrobat 11.0.09 or later to use the extension to create a PDF file. "I tried the repair costs in the help, but the problem persists.

  Hey mariap84043823,

  Please note that Acrobat 9 is not compatible on platform Windows 7 this is why you may receive this error message.

  You can check the system requirements here:

  ucts.html https://helpx.adobe.com/x-productkb/Policy-Pricing/System-Requirements-Acrobat-Family-prod

  Kind regards

  Ana Maria

• I am told my Firefox version is outdated but on Firefox said I'm updating version 39.0 + solutions for older versions do not work

  I run Firefox version 39.0 but told me that my version of Firefox is outdated even by the Mozilla site.
  About Firefox said I'm updating version 39.0 + solutions for older versions do not seem to work.
  I tried to download the full installer and run it, https://www.mozilla.org/firefox/all/
  (he was supposed to detect my existing installation and update).
  Then reopen Firefox and go to this site.
  Yet this site advises again once update me my version of Firefox...
  I would appreciate your help.
  Keep up the good work,
  Thanks in advance,

                                 Gunter Von Breslau
  

  If you couldn't fix it by resetting the custom entries general.useragent subject: config as described in the article above, then you might also Update firefox that should address this issue as well...

• You try to create VHDX or another format not supported for this version of the server

  Hello

  I have a problem with vWorkSpace do not load VM and I really hope that someone here might be able to add comments. We run vWorkSpace v8.5 on a box of windows server 2012 and v6.1 Hyper-V on Windows Server 2008.

  After running then changing the main image, I've updated the image of our cloud. Once the update of the virtual machine would not load, giving the below error

  End of the action (create) (failed to create. CreateVM: Unable to create the virtual machine of provided information. : CreateVhdxDisk: try to create VHDX or other format not supported for this version of the server. Path to the virtual disk: .avhd - call stacks - to Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP)
  at HypervLocalExecutor.HvCreateVM (string strUser, strPwd, VmCreateData createData, String strDomainNameIP, VmResult String & result)
  to CHyperVClone.doClone (basic_string<>\,std::allocator > * nsHostName, basic_string<>\,std::allocator > * nsUsername, basic_string<>\,std::allocator > * nsPasswd, VmDefData * vmData, basic_string<>\,std::allocator > * strDomainIPaddress, NewVmInfo * newVmInfo)-> Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVhdxDisk (String parentDiskPath, String diskPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateDiskForVM (vmMgmntObj, String vmPath, VmCreateData ManagementObject & vmData, String & vhdPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVirtualMachine (VmCreateData vmData, String domainNameIP)
  at Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP))...
  5 March 2015 15:54:15 - 1392:8580511090155201372 - caught error: Stack Trace and stack Exception below:
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVhdxDisk (String parentDiskPath, String diskPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateDiskForVM (vmMgmntObj, String vmPath, VmCreateData ManagementObject & vmData, String & vhdPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVirtualMachine (VmCreateData vmData, String domainNameIP)
  at Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP)

  We believe that it is somehow to do with Hyper-V under Windows 2008 and vWorkSpace running on Windows 2012 - the VHDX format is not supported by the version of Hyper-V server. A glance online confirms this. So my question is, how update the master image changed the format VHD vWorkSpace wants to use and is there a way to assign vWorkSpace don't know this format?

  I have widely in search of a solution to this line and not found anything it either, nor there seems a clear way in the vWorkSpace console to change that.

  Thank you

  Hello

  I suspect that you have created a snapshot on your model.  It is not supported, if you delete the snapshot so that the .avhd is merged to the vhd/vhdx and update the model in vWorkspace again.  If this does not work, you will need to delete the model of vWorkspace and then re-import.

  Concerning

  Paul

• Is the a similar to the old central action for older versions of Photoshop where the individual could until load and down load the web site actions

  Is the a similar to the old central action for older versions of Photoshop where the individual could until load and down load the web site actions

  This is the new site for extensions, actions, etc.

  https://creative.Adobe.com/addons

• my serial number will work for older versions?

  I am a teacher and have a newer version of the software, as do my students. I would like to be demonstrated in the same version they use, but it is no longer sold - will be my work of serial number for older versions of the same program?

  No, the serial number is related to the version/license that was purchased.  Could not acquire the software in the same way as your students?

• Cannot install itunes. Older version of apple software update is a ghost file.

  I had itunes on our laptop a few years ago and uninstalled through the normal route of the program uninstall Windows 7 a few years back.  Now I am trying to reinstall itunes and it comes up with the error "failed to remove the older version of Apple software update Contact your technical support group. "When I go in uninstall programs it shows"Apple Software Update"but when I click on uninstall, it says:"the configuration data for this product are damaged. Please contact the support staff. "When I search the file it's no-do. It is a ghost file.  Deleted, but still think it's there.  I tried to run "from the mistakes of audit" on the disc. I tried using Unlocker that does not show the program, says it removed and it is in the trash but still the same error. I contacted Microsoft and she ran at a command prompt to check for problems, (I do not remember the guest, she used) but also, it does not work.  How can I get rid of this ghost file?

  There are two former programs that show in uninstall program - one is called Apple Application Support and the other is updated to Apple, both installed software on 31/03/2012.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Try the tool MS difficulty under the second box to see if that can see and remove ASU. Otherwise, delete all other components and install everything except ASU proceeding to install missing components. iTunes didn't need ASU to work.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• HP Support Assistant: older version give problems, how to upgrade to the latest version?

  Hello world

  My computer is a HP Pavilion laptop running Windows 7 Home Premium 64-bit. I have problems with one of the HP software programs pre-installed - HP Support Assistant. It appears once a week (it works for a while after Windows has loaded and then appears a screen) and I opened Assistant support and attempted to change his schedule, but he simply refuses to save the changes I have made to its settings. I noticed that the version number is 4.2.5.3. The program when searching for updates (manually triggered), cannot access HP servers, but fails to download updates, cannot gather information can not analyze the system and tells me that my computer has all the updates (which, given the number of HP Support Assistant version) ", is obviously not correct). So I ran HP Update (version is 5.001.000.014), but it says that I have the updates.

  Finally, via msconfig, I searched for HP Support Assistant, but he wasn't anywhere. However, while it was in operation (which slowed down the computer), I saw it listed in the Task Scheduler (under applications, I think).

  I did some reading, and it seems that the latest version of HP Support Assistant is version 5. How can I upgrade to the latest version? Other preinstalled software of HP update and HP Support Assistant that came with the laptop includes:

  Center of HP solutions-

  -HP Advisor

  -HP MediaSmart

  -HP Photosmart Essential 3.5

  -HP Smart Web Printing

  -the printer drivers and software for my HP all-in-one printer

  I disabled the following HP services as they could slow down the process of starting Windows:

  -HP Health Check (disabled via services.msc)

  -HP Digital Monitor (I think that it has been installed with the printer software. Disabled via msconfig)

  Can someone help me please? Thanks in advance for your time.-)

  Hello

  Most HP installers contain several languages and you should be able to choose German during the first part of the installation.

  I recommend you to uninstall your current version first by using programs and features.  When it is uninstalled, it is often a good idea to restart the laptop before proceeding with the installation of the latest version.

  All the best,

  DP - K

• Why do I always see folders for older versions of Photoshop - but cannot uninstall them?

  I run Windows 8.1.

  I just installed Photoshop CC 2015.  My hard drive becomes quite comprehensive, I'm looking for sanitation and free up space.  As my Program Files > Adobe folder still shows folders for Photoshop CS5, Photoshop CS6, CC of Photoshop and Photoshop CC 2014, I decided to uninstall it.

  However, when I go to control panel > programs and features, only Photoshop CC 2015 is listed.  No older versions arise, so I can't uninstall.

  In Windows Explorer, the files are listed under Program files > Adobe as follows: -.

  Adobe Photoshop CC (64-bit) 999 MB

  Adobe Photoshop CC (2014) 2.8 MB

  Adobe Photoshop CC (2015) 2.4 GB

  Adobe Photoshop CS5 (64 bit) 2.8 MB

  Adobe Photoshop CS6 (64-bit) 522 MB

  As you can see, there are huge differences in file sizes. leading me to assume that some version contains only modest upgrades to previous versions - although CS 5 is very low compared with CS6!

  I'm confused!  Is it possible that I can flush out everything except CC (2015), or would be doing this screw a complex relationship between the installation files?

  Older versions of Adobe Photoshop very likely have been uninstalled via installer CC 2015. However the modules that you have installed in Adobe Photoshop file having not removed so the Adobe folders and module files remain on your system. Look at the content in the files do you see in them? Just remove the... Adobe UN-installers do not have use in the longest time.  They always seem to cause me pain.

• Where to find the download for older versions?

  Hello people,
  
  Where can we find an older version of the oracle by download database. I tried to find the oracle 10.2 64 bit but without luck.
  
  Best regards
  Igor

  https://support.Oracle.com and file a SR

• What is the date of end of support for Firefox version 19?

  I wish to confirm the date of end of support for version 19, February 2013?

  Security updates support ends when the next version of Firefox is released, so while Firefox 20 was released 6 weeks ago and 21 Firefox will be available Tuesday, May 14, that means that Firefox 19 is is no longer officially supported.

  I see that you are still running Firefox 17.

  Is there a special reason why you don't have not updated to the current version?

  The version of Firefox Firefox 17 that you are currently running is no longer compatible with security updates

  Please upgrade to the latest version of Firefox 20.0.x.

  • Help > about Firefox
  • https://support.Mozilla.org/KB/update-Firefox-latest-version
  • https://support.Mozilla.org/KB/updating+Firefox