Install the boot of Vista SP2 and crashes

Similar Questions

• Is no longer, I can download and install the updates for Vista SP2. I get error 80070490

  Original title: Windows of Vista SP2 update fails.  Vista Upgrade option grayed out

  Is no longer, I can download and install the updates for Vista SP2.  I get error 80070490, who reports that Vista Service Pack 1 is no longer up-to-date.  I downloaded and installed the "System Update Readiness Tool" without change in error.  Repair Vista with DVD does not give me the upgrade option.  My SP-2 is corrupt?  Vista Service Pack 2 also went out of support?

  Kind regards

  Ed S.

  Hello

  Method 1:

  Follow the steps in troubleshooting section and check if that helps.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  Method 2:

  You can also read this article and check if it helps.

  How to uninstall Windows Vista service packs as a troubleshooting step

  http://support.Microsoft.com/kb/948537

• Not able to boot after that windows update, just trying to install the number 3 setting 3, and then restart the computer. With the help of Windows Vista SP2

  Friday morning I wasn't able to boot my computer more. When I start my computer it won't seek to set a parameter nr 3 of 3. And then it restarts again. My computer tried to install some windows update settings the day before with no success. I Don t remember what it was. I got Vista SP2

  The same problem happends to my computer from friends four days, after she start a windows update installation. But it has solved its problem by using the Windows installation CD and use the repair tool.

  For me, my Windows installation CD I got from Dell does not work. Not the tool repair or startreparation. And I have no reference system to return.

  What should I do? I don't want to reinstall windows again, I have a lot of information on the computer I need to.

  All the world has noticed this problem?

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the ISP above Mathods to solve your problems, save your data using one of the methods below, and then reinstall Windows:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista SP2 (and Net framework 3.5 Family update) fails to install

  Hi, Windows update always fails to install Vista SP2 & Net framework service pack 1 & family update Net framework 3.5 with error code 80073712. I believe that I have now installed the Net framework updates to download and install them individually or in sequence with NDP35SP1-KB958484 - x 86.exe the last to be installed, apparently with success. Unfortunately, Windows update still lists this update as needing to be installed, and that fails to do so. SP2 fails to install with updated Windaows as well, so I downloaded and installed as described in the Article ID: 947366 - last review: June 3, 2009 - revision: 6.1 how bad turn Windows Vista and Windows Server 2008 service pack installation issues, install the tool available to update Windows KB957821 system successfully, restart the PC , the deactivation of all the components of McAfee, but again error: ERROR_SXS_COMPONENT_STORE_CORRUPT (0 x 80073712). I'm open to suggestions as to how I can solve 2 problems. Thank you

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643 (23 Oct-09)
  http://support.Microsoft.com/kb/976982

  =====================

  Step #1 => foremost, note what version of .NET Framework is installed:

  How to determine what version of the .NET Framework is installed and determine whether the service packs have been applied
  http://support.Microsoft.com/kb/318785

  Step #2-online now see resolution method 2 in this related KB article: http://support.microsoft.com/kb/923100

  After the the .NET Framework Cleanup tool, reinstall all the versions of the .NET Framework (but the ones you noted in #1 above) manually using the download links on the page, and then run Windows Update manually install security updates for same.

  NB: If you remove the .NET Framework 3.5 (SP1) by using the tool, reinstall .NET Framework 3.5 will also install .net Framework 2.0 SP2 and 3.0 SP2. Then, Windows Update will offer .NET Framework 3.5 SP1.

  IMPORTANT! =>, If you remove the .NET Framework 3.5 (SP1), reinstall your version of .NET Framework in the following order:

  1. the .net framework 3.5, then...
  2 .net framework 1.1, then...
  3 .net framework 1.1 SP1

  NB: KB923100 makes reference to this page: http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx.  Please read ALL as well as the related http://blogs.msdn.com/astebner/pages/8904493.aspx before using the .NET Framework cleanup tool.

  Step #3 => Check-in at Windows Update and install the critical updates of security offered.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I installed vista SP2 and when I started my computer back up everything on my computer is missing... How to get back all my pictures and music files?

  I installed vista SP2 and when I started my computer back up everything on my computer is missing... How to get back all my pictures and music files? I tried to do a system restore, and I can't go back any further, then the service pack install... so everything is still missing... Please help!

  Hello

  Were there any changes or updates made on the computer?

  I suggest you to see link and check if it helps.

  Recover lost or deleted files

  http://Windows.Microsoft.com/en-us/Windows-Vista/recover-lost-or-deleted-files

  See the articles and looking for the missing files.

  Find a file or folder

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-file-or-folder

  Tips for finding files

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-finding-files

• I ave a serial number of Windows Vista sp2 and I need the product key

  I ave a serial number of Windows Vista sp2 and I need the product key

  Unfortunately, the "serial number" can be used to obtain a product key.  Please see: How to replace Microsoft software.

• The installation of Vista SP2 broke my computer

  I've lived in innumerable discussions on this site and many others to solve this problem the Vista SP2 has caused my computer to have. I have a Toshiba with Vista x 64 Home Premium computer and after several attempts failed to download SP2 months ago, I tried last night and after that he was 100% and restarted my computer it actually ruined my computer to be useful. I don't have a vista disc but a recovery partition. I already tried to use the restore point created by vista before installing SP2, but of course since it is vista this restore point fails and I have created several others before, but as if by magic, they are not put at my disposal. What is even more galling it broke my partition Ubuntu separate to be able load as well which makes absolutely no sense.

  I get the same error again and again as hundreds of others after SP2 installation on the black screen: ! 0xc0190036! 3029/89361 (dsound.dll) , I found a solution involving the use of partitions recovery tools command prompt to use this code:

  C:
  CD windows
  CD system32
  faultrep.dll.old Ren faultrep.dll
  output

  now, it worked the first time during this first stop in 1316/89361 on the startup process when he stopped to faultrep.dll, then of course another stop to dsound.dll happened and I tried the same thing, as advised in a support forum and it worked in the command prompt, but loading at startup it will pass fine faultrep since the fix but will not pass the dsound.dll portion.

  I ran a test of memory and a hard drive and it is absolutely not she. It was absolutely the installation of Vista SP2 all screwing.

  A lot of people with this problem have been very well when they could use their restore point, but of course vista is still inconsistent and would not allow me to restore my computer so now I have a $1200 thanks to the crap service Pack2 weight. I can log on to the recovery tools command prompt and open notepad.exe and file open to view my computers content together intact so much, I would like to know a solution for this problem. I also found a command line to uninstall SP2 with high fees, but because I can not connect via the mode without failure of all or the safe mode with command prompt, how am I supposed to use the instructions to uninstall sp2 via command prompt?

  Any help would be greatly appreciated since windows makes my computer a waste of money.

  The page I used to solve problems has been directly for the support site for windows and for exactly the same problem I have but he did nothing. http://support.Microsoft.com/default.aspx/KB/975430 is the link, I tried method 1 is the system restore and that has failed, because it fails just about my only point that shows that I did much more than restoration. Method 2 is to rename the file that stops the boot process, who worked for the first file but not the second. Method 3 is the startup repair that does not work.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; (*Problems after installing a service pack*).

• I need to install the SP1 for Vista, but get message at the stage of installing "updates are not configured correctly. Change back '

  I need to install the SP1 for vista before SP2 for vista in order to use 2012 TrendMicro internet security. Thanks in advance

  Original title: Hi can someone help me please.  I need to install the SP1 for vista, but get this message at the stage of installing "updates are not configured correctly. How can change recovery"I fix

  I understand that you now have returned back to factory settings and have installed all updates except for service packs.

  .

  You will need to install the required service packs-

  How to get the latest Vista Service Pack
  http://support.Microsoft.com/kb/935791

  Windows Vista and Windows Server 2008 service Pack is not available for installation via Windows Update
  http://support.Microsoft.com/kb/948343

  You will need to install SP1 before installing Sp2.

  Once your computer is up to date, then you can think of Windows 7

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  I can't help you with the trend, but from memory, you must allow it's Installer to download to facilitate the download and installation etc.

• Where should I install the Boot Camp updates: Windows or Mac?

  With the help of Boot Camp, I have installed Windows 10 when my OS from Apple was Yosemite. Recently, I upgraded the operating system Apple to El Capitan. Today, while working on the side of Windows 10 things, I got a notice of pop-up that I should install the update for Boot Camp. So I have two questions actually:

  • (1) was not the latest version of Boot Camp included in the update of El Capitan? and,
  • (2) should I download it then install the Boot Camp update, when I run Windows 10 or when I'm on the side of Mac?

  1 n ° with the exception of the Boot Camp Assistant, all components of Boot Camp are Windows software and does not part of Mac OS X.

  2. do Windows.

  (137099)

• I get error code 800F0825 when the computer attempts to install the update to vista KB938371. What should I do to fix this?

  Ideas:

  • You have problems with programs
  • I get error code 800F0825 when the computer attempts to install the update to vista KB938371. What should I do to fix this? messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Other useful references include:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After the upgrade to Vista SP2, about 8 GB of space is missing? I run diskcleanup. Y at - it something like windows7 "clean system files" for Vista?

  After the upgrade to vista sp2, about 8 GB of sbace is missing? I run diskcleanup. Y at - it something like windows7 "clean system files" for Vista?

  Hello

  see if this program helps you to determine what is take up space

  http://www.Jam-software.com/treesize_personal/

  by default system restore will have up to 15% of the capacity of the hard disk

  you would like to reduce this amount

  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html

  http://www.vista4beginners.com/system-restore-space-used

  also use disk cleanup

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  The other Options tab is available when you choose to clean up the files of all users on the computer. This tab includes two additional ways to free disk space even more:

  • Programs and features. Open programs and features in Control Panel, where you can uninstall programs you no longer use. The column size in programs and features shows how much disk space each program uses.

  • System Restore and shadow copies. Guests delete you all but the most recent restore point on the disc.

  also scan for malware

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  and read these information from microsoft on windows optimization

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

• Install the update for vista (KB973917) error code 800736B 3

  I have a windows vista update (KB973917) error code but try to install it, I get an error code 800736B 3. Why is this?

  Hi TheodoreHar,

  ·         You are able to install some other updates without any problems?

  Try the following steps:

  Step 1:

  Try to reset Windows updated components and check if it helps:

  How to reset the Windows Update components?

  Step 2:

  Download and install the system update readiness tool and check if it helps:

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  I hope this helps.

• I try to install the Lexmark 810 series printer and I am unable to find the driver to download information from the drive to?

  I try to install the Lexmark 810 series printer and I am unable to find the driver to download information from the drive to?

  Try to install a Windows Vista driver if there is no native driver Windows 7.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• Hello. I installed the latest update of Firefox and when I start a new tab page displays not now my entry from google line.please help.tks

  Hello. I installed the latest update of Firefox and when I start a new tab page displays not now my google input line. I use Windows 10. Until the recent update (v4.1.01) each time I started a new tab the new page would show the google search entry line which is my default. Can help you to restore this feature? TKS

  Hi, 41 of Firefox, you must use the add-on tab override (browser.newtab.url replacement), to make changes to the page tab.

  Once installed, open the Add-ons (Ctrl + Shift + A) Manager > Extensions, and then look for the new tab override and click Options to set your preference.

  Notice, if you want only the new tab to be the same as your home page, you can use the Add on new tab homepage instead.

  You will then need to restart Firefox for all changes to take effect.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• I instaled Windows 7 64-bit Enterprise edition and installed the latest version of Firefox and it freezes every time that I run. Please help me.

  I instaled Windows 7 64-bit Enterprise edition and installed the latest version of Firefox and it freezes every time that I run. Please help me.

  4d4aae27-34ee-4620-b349-c03002813b2003-Jan-1312:30 AM

  54e24e0e-dfc4-466b-A347-4bd95536773e03-Jan-1312:30 AM

  22d351d2-6461-4F33-9FBD-6d31f769e73103-Jan-1312:30 AM

  8a8da99b-335e-43bb-AA12-4634aa0b431003-Jan-1312:30 AM

  A15bb095-aeb9-44E1-A79C-1a17cee207d503-Jan-1312:28 AM

  A few videos that use the Flash plugin contain a menu entry in the context menu that allows to disable hardware acceleration in flash player.

  To disable the mode you will need to edit the file C:\Windows\SysWOW64\Macromed\Flash\mms.cfg as explained in the knowledge base article protected.

  • http://KB.mozillazine.org/Flash#Disabling_Protected_Mode_in_Flash_11.3

  See also: how to solve the safe_mode of Flash Player for Firefox? :

  • http://forums.Adobe.com/message/4468493