Install the HP Laserjet Printer drivers

Similar Questions

• When you try to install the HP Laserjet 1300 printer error there is a problem installing this hardware.

  Original title: HP Laserjet 1300 Windows XP, SP3 error installation

  When you try to install the HP Laserjet 1300 printer, I get the following error message and the process stops and restores.

  CANNOT INSTALL THIS HARDWARE

  There was a problem installing this hardware

  HP Laserjet 1300 PCL 6

  An error occurred during the installation of the device.

  The specified Module could not be found.

  I have used the original printer installation cd, bought a new cd from HP and downloaded the drivers directly from the HP Web site and I get the same error.  The record show error install printer on each attempt of events. Can anyone help?  Thank you

  Hello

  You are able to install other programs?

   

  Method 1: See the following article:

   

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02073861&LC=en&cc=us&product=3795406

   

  Method 2: view the following steps and see if that helps.

  (a) disconnect the printer

  (b) uninstall the software and drivers on the computer

  (c) plug the printer back

  (d) allow the Hardware Wizard search for drivers

  e) if it does not, it asks you to install the source for the drivers, the installation driver CD and install the drivers and see if that helps.

• Follow-up of the steps to install the hp wireless printer and it worked only once. Now he says it is "offline."

  Original title: the computer geek

  Follow-up of the steps to install the hp wireless printer and it worked only once. Now he says it is "offline." Convenience store said that it cannot solve the problem. That's happened?

  Hello

  1. What is the brand and model of the printer?
  2. don't you make changes on the computer recently before this problem?
  3. What is the full and exact error message?

  Step 1: The procedure below can help you to fix this problem.

  a. Click Start > Control Panel > printer and faxes
  b. now right-click on computer and select the printer to use online

  Step 2: Update printer drivers.

  To install new or updated printer drivers to update
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_drivers_install_updatew.mspx?mfr=true

• Windows Installer tries to install the smart web printing

  Hello

  Whenever I click on my computer to open a folder or the Start button, windows installer is trying to install the smart web printing and I get a message error everytime. I have to manually close the window every time.

  I tried to remove the smart web printing from the Control Panel, but it did not work. I also tried to install the new version of the smart web printing and unstall, but it did not work.

  How can I solve this problem? I want to stop windows install tries to install smart web printing every time I open a folder.

  I have Windows 7.

  Thank you very much.

  Mary

  Hello

  Finally I found a way to solve this problem. I typed msconfig in 'run' and not all the HP Smartweb printing and windows elements installer in the startup and services tabs. I have no more problem.

  But thank you very much for your help!

• HP Printer Wizard opens AMD Catalyst Install Manager to install the HP Photosmart basic drivers

  I have upgraded to Windows 8 and want to install HP print and scan drivers for my Photosmart 7515e. However when I try, the wizard always wants to open the Catalyst Install Manager and reinstall this software. I do not understand why this should happen or why there may be a link between the printer drivers and CCC. Does anyone have an idea or an answer? Thanks in advance.

  I spoke with some colleagues and one of them was something you can try.  JonW suggested that CCC could extract to a folder name such as HP software.  The way around this problem would be to access your temp folder, delete the content, extract the software of the printer again, cancel Setup, access the folder temp again, rename the 7z folder, move to a different location 7z folder and run the setup.exe from the new location.  I'm total, instructions from the bottom a little more in detail.  Give it a shot and let me know what happens.

  1. Press the Windows key and type %temp%.
  2. Click the Temp folder.
  3. Press Ctrl + A to select all, or right-click and choose Select all.
  4. Press SHIFT + DELETE to completely delete the contents of the temp folder.  If a message appears saying: it cannot remove a file because it is in use, move this file.
  5. Run, or download and run the installer again.
  6. Once the installation finishes extract and arrives the first screen, cancel the installation.
  7. Access to the Temp folder again.
  8. Click the 7z folder to select it.
  9. Right-click on the 7z file and rename it.  I would say something like HP 7515 drivers in this way it is easy to find.
  10. Right-click on the 7z folder and select cut.
  11. Open a new directory and paste the file or paste the file directly on the desktop.  You can even put the file on a flash/thumb/jump drive and run it from there.
  12. Open the folder.
  13. Find the Setup.exe file and double-click it to run it.

• Cannot install Lexmark X 4270 printer drivers in my computer because the version of windows. Can u correct E-mail website to allow me to install the drives.

  I have laptop Dell Studio 1537. Operating system is Vista. I have Lexmark X 4270 all-in-one printer, but I can't install the drivers of software due to the version of windows. Can u pl advise me what to do. If you can send an email the correct site where I can see readers. Then I can download fdrom Web site.

  Thank you.

  Diakite in Sri Lanka.

  Hello

  Download your drivers from the link below

  Choose the right operating system it

  http://support.Lexmark.com/index?segment=support&UserLocale=en_US&locale=en&ProductCode=LEXMARK_X4270&page=product&FromPage=null#2

• How to install the HP LaserJet P2015 printer in Windows 7!

  Hi all!

  I'm luck using windows 7-32 bit. I would like to install the printer HP LaserJet P2015 in Windows 7, but I can't install it because during installation, it could not get. In fact, I can install it on Windows XP without any hindrance, but now I've upgraded to Windows 7 32 bit. Could you tell me what to do to solve it?

  Thank you very much and I look forward to hearing of all.

  My best regards,

  CHANCE

  Hey good LUCK.

  The printing of your driver functionality is prodided by the HP Universal print driver.

  You can download the driver by clicking on the button to download from the link below:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=1845551&prodNameId=1845552&swEnvOID=4062&swLang=8&mode=2&taskId=135&swItem=lj-95977-2

  If you may find it difficult to understand all the steps of the installation, you will find full details below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02536202#A6

  Please let me know of any necessary clarification.

  Sincerely,.

  Shlomi

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02536202#A6

• Impossible to install the software for printer AIO C6250

  Whenever I try to install the software for my printer C6250, I get an error message saying "unable to find a specific file" the file is C:\Users\DrAnth-1\Appdata\Local\Temp\7zS5FBE\setup\... \blocksysus.

  I can't find this file on my computer.  The installation stops and I'm back where I started.

  Can someone help me?

  Tony, you updated to Vista? To run the cleaning brush to make sure that we get rid of everything left on the software. Heres how:

  Of the Original installation CD:
  1. Insert the CD in the drive and then cancel Setup
  2. open my computer and click right then on the CD from the drive and select open
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://www.Adobe.com/support/flashplayer/downloads.html
  9 download drivers and full software features
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76043-1&cc=us&DLC=en&LC=en&OS=4063&product=3308554&sw_lang=
  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:
  1. type % temp % in the field of race
  2. Locate and open the folder starting with 7z (example: 7zS2356)
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://www.Adobe.com/support/flashplayer/downloads.html
  9 download drivers and full software features
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76043-1&cc=us&DLC=en&LC=en&OS=4063&product=3308554&sw_lang=
  10. run the download to reinstall the printer

  Let me know if this solved your problem.

  Thank you!

  Sean

• Cannot install the MFP M177fw printer driver

  I try again to install the driver and follow the instructions at the bottom of the link but still cannot install. I start small windows and even to create a new user, but can not run.

  http://h30434.www3.HP.com/T5/printer-software-and-drivers/not-able-to-install-a-driver-for-MFP-M177f...

  I use windows 10 try to connect with the wireless option that the printer is in another room. The printer is connected to the router and ping is passthrough. But during the installation, the installer cannot find the printer. I will provide the number IP Installer but nothing helped.

  Can I do to install? Thank you.

  Rgds,

  Tony Thk

  Hi @TonyThk,

  Thank you for showing interest in the Forums of HP Support!

  I understand that you are unable to install the printer wireless. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that you have followed the steps in the post you mentioned. In addition to these steps, try the following.

  Tips for a successful wireless connection:

  • What type of encryption are you helping? HP recommends WPA or WPA2.
  • Using a unique network name (SSID).
  • Avoid using filtering by Mac address of the router.
  • Make sure you have 802.11 g active.
  • The printer cannot connect to the 5.0 GHz network. If you have a double router broadband, the 2.4 GHz and 5.0 GHz network names are not the same. Rename the 5.0 GHz network.
  • Don't hide your SSID (network name).
  • Change the router channel fixed wireless as the 1, 6 or 11, who less than traffic.
  • You have a switch or an extra router?
  • Do not use a network of comments (SSID).
  • Disable UPnP on the router.
  • Set the router to 20 Mhz only, or 145Mbps depending on the router.
  • Update the firmware on the router.

  Disable IPV6 in front panel of the printer menu:

  1. Configuration menu
  2. Network configuration
  3. Network services
  4. IPv6, select disabled.

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  To assign the static IP address, use the following steps as a guide.

  1. Print a Page of Network Configuration menu of the printer front panel. Note the IP IPV4 of the printer address.
  2. Type the IP address in the browser to bring up the SAP.
  3. Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  4. Select Manual IP.
  5. Enter your IP address manual (192.168.0.232)
  6. Enter 255.255.255.0 for the subnet mask, except if it is different.
  7. Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  8. Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  9. Click on apply.
  10. Restart the router, the printer and the computer.
  11. Test print.

  Ensure that your router and firewall do not block these ports.

  • UDP ports: 427, 137, 161
  • TCP port: 9100
  • Card photo upload:
  • UDP ports: 137, 138, 427
  • TCP port: 139
  • Scanning:
  • UDP port: 427
  • TCP ports: 9220, 9500
  • The HP device status:
  • UDP port: 161
  • Sending faxes:
  • UDP port: 427
  • TCP port: 9220
  • Installation of the HP device:
  • UDP port: 427
  • Ports of Web Services:
  • UDP and TCP: 80, 443, 5222 and 5223
  • Hello Ports:
  • TCP and UDP: 5353 and 5297, 5298

  Update the firmware of the printer:

  • Click here to download and install the update of the firmware of the printer.
  • Make sure that the printer is connected directly to a wall outlet (do not use a bar or a surge protector).
  • What were the results when you ran the printing and scanning doctor (she print or scan, error messages)?
  • Try to install the USB printer.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Error: "error-printing" when tried to print to the HP Laserjet Printer

  Original title: HP Laserjet 6 p uninstalled then re-installed but does not work

  HP Laserjet 6 p would not print envelopes correctly so I not unhooked printer.  Re-installed but now ot does not at all.  I tried the printer on Win98 computer and it works fine.  Went back to Vista machine but only the message "error-printing" get under control panel.  Any ideas?

  Hi Bobster123,

  We recommend that you run the Printing Troubleshooter and check if the problem persists.
  a. see solving printer problems
  b. click Microsoft hotfix and run the tool successfully.
  c. restart the computer and check if the problem persists.

  You can also post your query HP printer forums for further assistance.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installing the driver for printer Lexmark X 1270 all-in-one for indows7

  I'm unable to use my Lexmark X 1270 printer because I bought my new ticket simple pb, computer laptop windows 7.

  I uninstalled the printer and when I tried to reinstall, the priner match is not found! It also appears an error message whenever I try to download :-(

  Help, please

  Hi Susan Martinho,.

  ·         What exactly happens when you try to install the drivers for the printer?

  ·         You receive an error message?

  Lexmark X 1270 all-in-one printer is compatible with Windows 7.

  See the link below for more information on the compatibility of the printer with Windows 7:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=Lexmark%20X1270

  I suggest you to download and install from the link for Windows 7 printer drivers

  http://support.Lexmark.com/index?segment=support&UserLocale=en_US&locale=en&ProductCode=LEXMARK_X1270&page=product&FromPage=null#1

  I also suggest you to install the optional update drivers; You can see the article for more information:

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  I hope this helps.

• How do I install the 3010cn Winows 7 drivers

  The R167002 file does not any .msi or Setup.exe file.  The instructions to install the driver for Vista in Windows 7 Reference running the installer in Vista compatibility mode, but it is obviously not possible without a Setup.exe.

  Does anyone know how to set this printer network for Windows 7?

  TIA.

  Hey Stan,

  Please let us know if you are using Windows 7 32-bit version or 64 bits one. Please check the respective drivers to download for the same thing:

  Windows 7 32 bit

  http://Dell.to/10iCI5S

  Windows 7 64 bit

  http://Dell.to/WBclHj

  Once downloaded please follow the steps below to install the same:

  Download

  1. click on the link download now to download the file.

  2. when the file download window appears, click Save to save the file to your hard drive.

  Extract the files

  1. navigate to the location where you downloaded the file, and then double-click the file to decompress the download package

  2. click on continue.

  3 specify the location where to unzip the files.

  4. click on the OK button to extract the files.

  Once the file extracts the message all files have been unzipped will appear.

  5. click on the OK button to exit the installation program.

  6. go to the Start button.

  7. go to settings, click Printers.

  8. Select Add a printer.

  9. follow the instructions to set up your printer.

  10. Select Have disk and point to the location where the drivers were extracted.

  Thanks and greetings
  Sandeep P
  #iworkfordell

• Where is the best place to go to install the driver for printer hp 1320?

  Where is the best site to get the printer drivers? I have a hp 1320 printer and cannot get it installed correctly.

  HP

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=410624&TaskID=135&prodTypeId=18972&prodSeriesId=410622&lang=en&cc=us

• 8 window and the HP laserjet printer

  I'm having a problem with the HP printer.

  I got a new computer with window 8 is installed.

  I used to use HP laswejet p1005, and I could not install the driver on window 8.

  So I downloaded the HP laserjet p1000 series for Windows 7 (32 bit), but it did not work.

  Problem is that I can't uninstall it.

  The other problem is that I bought an another HP LaserJet P1102w, but somehow the process installation continues bar to go and never completed the installation.

  How can I uninstall the driver for Windows 7?

  And how do I install the driver of HP p1102w on window 8?

  I will appreciate your advice.

  Hi fioretti,.

  Uninstall the HP printing software

  Follow these steps to remove the HP printer driver and software of a computer of Windows 8.

• How to install the Dell AIO 946 drivers in compatibility mode?

  Original title: printer

  I have the drivers for the Dell AIO 946 printer folder on my hard drive. I don't know how to install it and make it compatible with Windows 8. Any suggestions?

  Hi Patsy,

  I recommend to install the latest drivers for the printer, make sure you have the latest files from configuration (printer drivers) on your computer.

  If this is not the case, see the following article to download the drivers.

  Reference Dell 946 printer all in one

  Dell AIO 946 is not compatible with Windows 8, see Dell AIO 946 - Win 8

  To install the drivers in compatibility mode, refer to the following steps.

  a. right-click on the configuration file, and then select Properties.

  b. click on the Compatibility tab, check the box next to run this program in compatibility mode for and select Windows.

  More information on Dell 946, see the following article.

  Pilot personal all-in-One Printer 946 downloads, set of Information, interview Guides and troubleshooting steps

  Keep us informed on the status of the issue.