8 window and the HP laserjet printer

Similar Questions

• How can I get a query in the search field to open in a new tab or a new window, and the current window?

  How can I get a query in the search field to open in a new tab or a new window, and the current window?

  If you are looking through the search bar in the Navigation toolbar, this preference can be changed to research it open in a tab.

  Type of topic: config in the address bar and press ENTER. Then answer "I'll be careful." Type this pref in the search at the top.

  Browser.Search.openintab = double click to switch to true

• I have just started with a new internet provider and get phone calls from a source to say that they are windows and the need to access my computer because its infected in windows. It is this true.

  I have just started with a new internet provider and get phone calls from a source to say that they are windows and the need to access my computer because its infected in windows. It is this true.

  No, it's a scam, ignore the call.

  Just hang up, they are trying to steal your information or to install a virus on your PC.

• Window and the mouse crashes when you try to close the windows

  Original title: window crashes when you click on the red X

  I use Windows Vista Home Premium (64-bit platform).  Just recently, when I right click on the red X in the upper right to close a window, the window and the cursor freezing for about fifteen seconds.  The window then closes, and the slider works normally.

  This happens to my office, although my laptop (same operating system Vista, except for the 32-bit version) works normally.  I use CCleaner on a regular basis, and I have the latest version of AVG anti-virus and Microsoft Security Essentials installed.  This Setup has worked well for over a year.  This problem appeared only in the last 24 hours.

  Gordon

  Houston, Texas

  Hello, Mr. the President Y. K..

  First, as soon as the computer and then restarting it later in the day, the question has not repeated itself.  I had read on Google that people with this problem a couple of years, were not so lucky.

  I have not addded any software, except to perform Windows updates usual a week ago.  The suddenness of the appearance of my problem led me to believe that these patches were probably not at fault.  When I went to log on to this second time, I had planned to restore the system to a previous backup to see if that gave me work around the problem.  However, it was not necessary.

  No error message appears when the problem occurred, and the problem was if I was in the office or on the Internet.  Nevertheless, I intend to register your comments useful diagnosis for later use, and for your efforts, thank you very much!

  Kind regards

  Gordon

• Recently, my laptop was hacked despite the defender of the window and the firewall running. After the accident, I have WINDOWS DEFENDER IS SETTING SWITCHED ON

  Recently, my laptop was hacked despite the defender of the window and the firewall running. After that accident, I reinstalled vista Dell supplied CD. Initially defnder window was running, but I discovered it suddenlly, if off. Attempts to change IT is futile because it shows Run Time error

  There is an installed antivirus program? Windows Defender is not an AV, it protects the system of spyware and potentially unwanted programs.
  Is there an antivirus or Security Suite program that is installed with Windows Vista included on the Dell disk?

  If so, what is disable Windows Defender, such as AV/SS can have a spyware component included with what is supposed to disable Windows Defender to not cause conflicts.

  Expert MowGreen Windows IT Pro - consumer safety

• How to check the version of windows and the number of bits?

  Dear Sir

  As I could not download and watch a video show, I was told to check the version of windows and the number of bits. I remembered the upgrade to version 10 of Windows when you are prompted before. However, when I clicked on 'This PC' to check the C:\ drive, it shows Windows8_OS (C :).  It is quite misleading.  Can I know how to check & confirm the correct version of Windows and where to find the number of bits as well?

  Thank you.

  Looks like you're on windows 10, but after the upgrade is not changed the label of the hard drive.

  Type winver in the run box-press windows key + R box simultaneously.

  If the Windows 10 Build 10XXX State, you're on windows 10.

  Simply right click C: / and select Rename and rename the drive in Windows10OS or what you want.

  As far as the pieces is concerned, the PC this right click > properties and see the following line:

  

• Just bought photoshop cs6 for windows and the installation received disc.

  Just bought photoshop cs6 for windows and the installation received disc.  Where do you find the serial number on the disc?  This should start the serial number?  The disc was in the original box and I see a number starting with 910...

  The box was in a brown envelope, and it has sticker bar code on the back with more digits.  Where should I look for the actual serial number.

  http://helpx.Adobe.com/x-productkb/global/find-serial-number.html

• How to hide the windows, and the Oracle Logo?

  I would like to hide Windows and the Oracle Logo in the window of the Oracle
  
  https://sites.Google.com/site/myoracleproblems/home/screen
  
  or move the higher demand. Does anyone know what to do, if anything?
  
  Thank you
  m.

  Hello

  I think that sooner or later you will need, you can not build up is an application of forms, reports and don't need menu.

  The only way you can play to hide this menu and it properly tested and works :)

  Kind regards

  Abdetu...

• Remove components, Windows and the command start location

  I am wanting to do an interactive application which is fullscreen on two monitors. I know that the normal procedure of full screen call will defult the full screen for only the primary monitor. I was wondering if there was a way around it. Like, if I removed the edges of windows and the flash toolbar of the application, set the location of the initial window to start at (0,0) and then set the size of the stage in the resolution of the horizontal resolution compined two monitors. Is this possible and if so what the things (terms, methods) I again to start watching.

  Thank you

  Joe

  As I said you can't - unless you use AIR (which you can do directly from CS5) or a third-party projector

  --

  Kenneth Kawamoto

  http://www.materiaprima.co.UK/

• Photosmart 5515 appearing as a regular printer and the other grayed printer under windows 7.

  I have windows 7 32-bit, with 500 GB disk and 4 GB of ram. J’ai récemment supprimé tous mes pilotes usb et puis réinstallé, parce que je recevais l’écran bleu de la mort (BSOD) chaque semaine ou deux, prétendument causé par le pilote usb d’etron de gigabyte. My motherboard is a gigabyte GA-A75-D3H.

  I went through several iterations recover my usb drivers and working properly. The last problem seems to be with the printer driver. I have just turned the printer off, removed the two printers from the list of devices and printers, and back in the printer market. The drivers once again and the printer "shadow" is back.

  I tried printing HP and doctor scan, and it is a photosmart 5515 says he was not installed. And there does appear to be a way to remove it from its list of HP devices.

  I don't know what to do next. I used windows xp for years and I'm quite familiar with it, but I'm still learning on windows 7, so I don't know what would be my next step in this process of elimination of the printer "shadow" disappear for good.

  It turns out that the greyed out printer still had something left in its queue. It was not connected to any port, so I plugged in the port for the regular printer, and it printed a few things. And now, the greyed out printer disappeared, so I guess that the queue to be empty. Problem solved.

• Install the HP Laserjet Printer drivers

  How to install drivers for a HP4700 Color Laserjet?

  I tried to add a printer on my 'new' computer and found out that there are no drivers available for an HP4700 Color Laserjet. If I use the generic driver, I get a quality poor printing B & W out.

  I could not locate the download correct driver for the printer. I have download a .dmg file, open it, click on 'Install a Software Package', and I get an error message that says "Installed failed because there is no driver to download.

  I know that a driver must exist for this printer because I have another Mac, El Capitan, running and it has installed HP drivers and I can great print outs.

  Is there a web page 'secret' with the downloads for this printer? Googling "Drivers for HP printers" gives a lot of results, but none of the downloads seem to work.

  Can anyone offer advice on where to find the drivers for a HP ColorLaserJet 4700?

  Greetings Joeswell,

  Thank you for using communities Support from Apple!

  I understand that you have a printer HP Color LaserJet 4700 that you want to use with your Mac. This printer is listed as being directly accessible from the software update of available software on your Mac, in accordance with the following article.

  Printer and scanner software available for download for your Mac - Apple Support

  For more information on how to get the software, you must set up this printer with your Mac, please refer to the instructions in the article.

  Apple offers third-party software for scanners and printers as software updates. To set up your printer or scanner, just connect it to your Mac. If the software is needed and available, OS X automatically downloads and installs.

  This article is a comprehensive list of the models currently supported for printer and scanner and associated software provided by third-party as providers of November 3, 2015.

  Look for software updates before connecting your printer or a scanner. This updates the list of the most recent supported on your Mac printer and scanner models. If you do not check the updates before trying to connect a new printer, you won't see the software available when you connect your device. If you use a Wi - Fi printer, be sure to connect your printer to your Wi - Fi network before adding it to your Mac.

  Have a great day!

• Is it possible to save in a file or save it in your mailbox when you pay for something online and the line can print this receipt for your records?

  If I try to save a receipt, it is usually said cannot be saved or it will copy the Bill but not the reception.

  If file > save as will work not (web page complete), then probably the simplest method is to download CutePDF Writer, which is a small handy utility that allows you to create pdf files by "printing".

  After installing CutePDF Writer, just print the receipt as if you were going to print on a sheet of paper, but when you see the print dialog box select "CutePDF Writer" from the printer selection window (you may use file > print rather than clicking on the icon of the printer in the toolbar).  A dialog box opens asking you to specify a file name and location, and then a pdf of the invoice will be created.

• Error: "error-printing" when tried to print to the HP Laserjet Printer

  Original title: HP Laserjet 6 p uninstalled then re-installed but does not work

  HP Laserjet 6 p would not print envelopes correctly so I not unhooked printer.  Re-installed but now ot does not at all.  I tried the printer on Win98 computer and it works fine.  Went back to Vista machine but only the message "error-printing" get under control panel.  Any ideas?

  Hi Bobster123,

  We recommend that you run the Printing Troubleshooter and check if the problem persists.
  a. see solving printer problems
  b. click Microsoft hotfix and run the tool successfully.
  c. restart the computer and check if the problem persists.

  You can also post your query HP printer forums for further assistance.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Strange pop-up windows and the failure of resettlement

  In recent weeks, while using yahoo or youtube, kept contained a sort of 'viral' pop-up window. At first, I blocked the pop-up windows in the preferences, but this week he did not.

  I decided to reinstall Firefox, I deleted my profile and all, but when you try to run the new copy I get a warning saying a copy of firefox is already open so I can't run it.

  Anyone know what is happening? I use Mac OS Lion.

  Any help will be really appreciated!

  Make sure that you delete the file profiles.ini so if you deleted the folder of Firefox profile with the random name.

  • http://KB.mozillazine.org/profiles.ini_file
  • http://KB.mozillazine.org/Recovering_a_missing_profile

• Auto-effondrement in the library window and the dialog "change a bookmark this ', the last folder expanded

  In the tree of files of the window Library (bookmark and history) and the folder hierarchy of the dialog "edit this bookmark/New Bookmark', once a folder is developed, it will not collapse until the user manually clicks again expando button. Overtime, in a big folder, a lazy as user me tree may have a lot of extended records waiting to be collapsed.

  So, I'm looking for an extension that can auto-réduire the last folder expanded, or at least adds a button 'Close all folders' in the above window/dialog.

  I know that the extension "Autoclose Bookmark & history records". But it only deals with the sidebar.

  The add-on "Auto close folder in library" does exactly what I want.