Install the Lab Manager 1622 Error Code.
Today, I tried to install Lab Manager 4.0 on Windows 2003 x 86 Enterprise Edition I went ahead and fixed all the dependencies, finally the last dependence was .net 2.0 SP1, I went ahead and installed the file. After that, whenever I double click on the installer to Lab Manager I get error code 1622. He doesn't even go by checking dependancys. Thanks for the help.
It's a standard MSI 4 error code numbers:
1622
Error opening installation log file. Verify that the specified log file location exists and is writable
The log files are under Windows Temp and %Temp% (user profile) as it extracts there to be executed.
Kind regards
Jonathan
B.SC., RHCT, VMware vExpert 2009
NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.
Tags: VMware
Similar Questions
-
Cannot install the printer 101-707 error code
I am installing a Kodack printer all-in-one. I won a creative process failed. "' E:\setup\kapmaster.exe ' error code101-707.
Are you sure you got this error code correctly?
What printer model?
What version of Windows, including service pack? Make a right click my computer and select properties for more details.According to this page, 101-2 to 101-3010 error codes are associated with "OS" (e.g., Windows). The instructions on this page look for the part of the code after the hyphen on this page - say, but there is no code 707 listed.
If there is an error of text in addition to the code, what is it?
If you have any other information, on general principles, follow the tips in One Article. Don't skip step 4 and go to the Kodak site (step 6) and get the package of current driver/software for your printer and your version of Windows instead of the software from the CD supplied with the printer.
If you still get the same error, I saw a thread that suggested that the problem was caused by a corrupt installation of the .NET Framework 2.0. If this could be the problem, start here--> http://blogs.msdn.com/b/astebner/archive/2008/03/07/8108332.aspx
Other useful links to the blog of Aaron Stebner .NET Framework dealing with:
Should I always older versions of the .NET Framework installed, if I have the latest >
http://blogs.msdn.com/b/astebner/archive/2009/04/20/9557946.aspxReason to reinstall .NET Framework in a specific order > http://blogs.msdn.com/b/astebner/archive/2010/12/22/10108400.aspx
What to do if other .NET Framework configuration troubleshooting procedures help not >
http://blogs.msdn.com/b/astebner/archive/2008/03/07/8108332.aspxInstallation of the .NET Framework unified Troubleshooting Guide > http://blogs.msdn.com/b/astebner/archive/2005/08/22/unified-net-framework-troubleshooting-guide.aspx
.NET framework Cleanup Tool (download & User Guide) >
http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx.NET framework Setup verification tool (download & User Guide) >
http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspxMore information about the MS program install and uninstall troubleshooting tool >
http://blogs.msdn.com/b/astebner/archive/2011/11/23/10241056.aspx -
Cannot install the Microsoft fixit 16977927 error code
Original title: error code 16977927
My OS is windows vista, Iam getting the error code 16977927 when I tried to install the Microsoft fix it Center
Hello
I suggest you post your query on the Microsoft fixit center forum:
http://social.Microsoft.com/forums/en-us/fixitcenter/threads
-
Install the KB2607607 package 0x800f081f error code.
I have the same problem. The package of my computer's language is German. I don't speak this language. I tried to install two language packs - English and Bulgarian, but the installation failed.
Nothing works in my case, lpksetup failed also.Coulld do? I can't use a German version of Windows.
Separated from -.
Hi Ivanka.
I imagine the inconvenience that you are experiencing.
Do you and changes to the computer before the show?
If you receive the error Windows Update 0x800F081F, this means that a file needed by Windows Update is corrupted or missing.
Follow the steps in the article and then try to install the language pack again and check if the installation went successfully by:
Windows Update, error 0x800F081F
http://Windows.Microsoft.com/en-CA/Windows-8/Windows-Update-error-0x800f081f
In addition, follow these steps and check:
a a.. from the desktop, press the Windows key + R to display the Run dialog box.
(b) in the Open box, type winver , and press OK.
c. in the screen on Windows show Windows 8 single language?
If "is not" display Windows 8 language unique, then follow the steps in the Microsoft's KB article to install the language pack:
Language packs are available for Windows 8 and Windows RT
http://support.Microsoft.com/kb/2607607/en-us
I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.
-
I have 64-bit Windows 8 and all these problems started when I tried to install the 8.1 update. Whenever I try to go to the store to update to 8.1 I get the error message saying "we were unable to connect to the store. This could have happened due to a server problem or network connection has expired. Please wait a few minutes and try again. "So I looked at this topic and you have tried all the tips of help from Microsoft, convenience stores, store transparent cache, etc. etc. etc. etc.. I can not connect to the store at all. Now I can't change users to a Microsoft account because it tells me that when I try that "we could not connect to the Microsoft services right now. If this problem persists, look for 'referee' on the start screen. "I also performed this task without success. Then I have a Windows update KB2862973 that fails to install and gives the error code 80073712. I looked for solutions to this problem, and those who have tried unsuccessfully. I really need someone to tell me how to fix all these issues, because I believe they should be linked. It is a desktop pc Dell that is connected to the internet without any problem and is only about 1 year. I am tech savy, but need HELP!
Thank you
Shane
Thanks for the detailed response. This problem may be caused because corrupted Windows Update components.
I suggest you to reset the Windows Update components and check if it helps.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Important: Follow the steps in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you modify it, Save the registry restore problems.
If the problem persists, then I suggest also that you can run the DISM commands using the following link: http://support.microsoft.com/kb/947821
Keep us informed.
-
Cannot install the KB 938371: 80004005 error code
I am trying to download and install KB 938371 get error 80004005 every time. Help, please!
Hi Joe Cool 1306,
I suggest that you try the steps listed below and check, if it helps you to install the update:
1. download the stand-alone package of the update from the link below:http://www.microsoft.com/downloads/en/details.aspx?FamilyID=695d7c32-252c-40e8-a15d-81029bec7d76
2. start the clean boot computer and try to install the update. Link below will help you to start the computer in clean boot:http://support.microsoft.com/kb/929135
Make sure that you reset the computer in normal mode (you can see step 7)
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I try to install the updates and still error Code OX643
I have a XP system and I try to update each time I get an error Code OX643 I'm just an average user nothing special on my computer. Help, please
The system says a security update for Microsoft .NET Framework 1.1 SP1 on Windows XP 2008 x 86 (KB2656353) has failed.
Hi ClydeShaffer,
Follow the troubleshooting steps in this document to resolve the problem with the error 0 x 643. If these troubleshooting steps do not resolve the problem, please let us know and also provide the PA information be requested.
-
Can not install the printer driver. Error code 0 x 0000490.
I have Windows Vista and I have a printer HP 3512. For some reason, I can not install the printer and I keep getting an error 0 x 0000490. Help, please?
Moved from Vista to install, upgrade and activate Forum.
Hi Courtney,
Please contact the Microsoft Community.
I'd like you first try printing HP and doctor Scan.
http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03286146
After that, I would have you to refer to this article-
We know if that helps your cause.
-
Cannot install the printer wireless with error code 0 x 00000643
Original title: error0x00000643 on the installation of the printer
try to install printerget wireless to the final installation and getting the error 0 x 00000643. Windows Vista 64-bit
Hello
Thanks for posting your question in the Microsoft Community.I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:(1) did you of recent changes to the computer before this problem?
(2) what is the brand and model of the printer?Please follow the methods and mark the question below:Method 1:I suggest you to install the printer in clean boot mode.You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.
To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Method 2:Install the latest drivers for the printer from the manufacturer's website and check if that helps.ORYou can also uninstall the printer using the network browser and install it again.To do this, follow these steps:a. open the network and sharing Center. To do this, type Network Center and sharing in the search box and then click Network Center and sharing in the list programs.b. in the pane tasks, click view computers and devices.
c. find the printer and then right click on the printer to uninstall.
d. once the printer is uninstalled, reconnect the printer to the computer. The Plug-and-Play service begins to install the printer.Reference:Error message when you try to install a WSD printer on a Windows Vista-based computer after installing first attempt fails: "impossible Operation completed (error 0 x 00000643).I hope that the information above helps you. -
I have a very serious problem about Bluetooth. And it's really frustrating. I don't know exactly what the problem with it, but my problem is as follows
When I connect my mobile phone via Bluetooth for laptop (win 7 ultimate), my system shows the connection. Also, I see my mobile phone listed in the device window. Earlier, when I brought the computer laptop, everything seemed good, at this time, when I use it to open the device (IE to control ); a window would show the option for playing music (there was a lot of option as a 1 ' headset and speaker") and other services supported by the device. but now, suddenly somehow window appears but with in a 2 sec to disappear again. Whenever I try to open the device I get this error. I must say that it is very very frustrating as you try to move your cursor to click on audio playback on this portable display option, the window disappears. Help, please. Now, let me tell you what I tried to solve this problem.
I have laptop Lenovo, which has something like that for bluetooth
Broadcom Bluetooth 4.0 USB
Microsoft Bluetooth enumerator. I have 32 bits of the system, processor i3, win 7 ultimate, one port wifi
In the center of troubleshooting, I tried for the material of scanning that show this Bluetooth device driver not installed (I could see a yellow mark on this device in the Device Manager and a code 28 error).
But windows cannot fix it. I have tried multiple devices but nothing turned up. also I tried the same devices on different laptops and all of them worked very well. I checked online trouble - shooting.but not very useful. Please don't tell me about recovery. I don't know when it happened.
Please help me. Please give me link if there is no download needed
Original title: bluetooth
Hi Roger,
You encounter the error code 28 in the device to any device manager if the driver for this device is not completely installed on your computer. I suggest you to update the bluetooth adapter driver and check if it helps.
Refer following article which contains steps of troubleshooting for bluetooth related questions and see if the problem is resolved:
Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device
Note: Ignore the title of the article and also to find additional troubleshooting steps under the "more information" section.
Please come back if you face problems related to Windows and we will be happy to help you.
-
original title: help with my sound please
After you have installed the realtek driver it says code error 10 can't start sound...
also I can't find the button sound.video and games on the Device Manager heres the message in Event Viewer:Log name: SystemSource: PlugPlayManagerDate: 17/05/2012-18:50:27Event ID: 12Task category: noLevel: errorKeywords: ClassicUser: n/a: My computerDescription:The device ' in Build Conexant Type 2 modem "(HDAUDIO\FUNC_02 & VEN_14F1 & DEV_2C06 & SUBSYS_10250126 & REV_1000\4 & 37d33e44 & 0 & 0102) disappeared from the system without first be prepared for removal.The event XML:12 2 0 0 x 80000000000000 435 System badimo-PC Modem Conexant - in the generation Type 2HDAUDIO\FUNC_02 & VEN_14F1 & DEV_2C06 & SUBSYS_10250126 & REV_1000\4 & 37d33e44 & 0 & 010200000000 Hello I want to,
The problem you describe looks like you are maybe install the wrong driver for your sound card.Have you checked that the driver is for your specific device?If you look in your system's Device Manager, is there a yellow exclamation next to the audio controller?If so, this seems to indicate that the drivers installed are not good for your sound card. Usually if you double-click the device in Device Manager, it will say something in the sense of "Device cannot start". -
I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?
Hello
1. at what stage of the installation, the computer crashes?
2. what operating system was installed on your computer prior to this?
If you have the similar problem as mentioned in these links, you can follow these links and check if the problem persists:
Windows XP Setup stops responding (hangs) during the "Preparing Installation" phase
Windows XP does not meet the Message "Setup starts Windows XP"
Hope the helps of information.
-
Five of the six updates have been installed correctly, KB2698365 failed with error code 80070570. What should I do to install this important update successfully. I'm not a pc expert and don't have no knowledge will take it the word of experts from the pc. KB2698365 is 'important', so I tried to install it several times, but always failing with error code 80070570. I've been on a boring treasure hunt for to install this 'important' update, it seems to find no will to give helpful advice anywhere. I would appreciate help installation of this major update, and talk about normal advice, how to install it successfully without failure of the error code 80070570. What is the error code 80070570.? I use windows vista Home premium, service pack 2, 32-bit operating system. I'm using the essentials of security. Thank you for the consideration of this issue. NIC
Hi, Grizzly7659,
Follow the instructions given by Taurian & guenoun
-
The Lab Manager Ldap integration
I, ve configured a vSphere/ESX environment of OTA in a subnet of 172.10.1.0/24.
Open ports on our firewall to manage OTA from our direct environment. Online subnet: 10.128.0.0/16
Installed Labmanager 4.0 and add it to the field in the environment of the OTA.
Everything works fine. After you open the port 389, I want to synchronize LDAP.
When I do "Test LDAP settings" I get the following error:
I read that it is not best practice to place a LM server in a domain.
http://blog.aarondelp.com/2010/03/VMware-Lab-Manager-install-notes-and.html
I tried the Ldap synchronization with the server of LM in a working group, but also, it does not work.
Tried with the domain admin user, manually add the ldap port, it was left empty, different DN, nothing worked.
Read also in the article is not to name the server labmanager LM, and that's exactly what I did...
Also the lab Manager folder described in the article was not created in vCenter.
I think uninstall LM, rename the virtual computer and reinstall LM. I don't know if it will solve this problem.
I hope someone has a solution...
Thank you...
the 'test' LDAP settings actually trying to find the account provided credentials. It's like a back loop... I should be able to find me before as I find other people.
If the test account is not in the basic DN path of research, but can locate other accounts then it should.
Best regards
Jon Hemming
-
original title: kb2585542
I have a 2008 standard server, installing kb2585542 last updated security. error code is 80070005. my server is 32-bit xenon.
THX
kg
Hello
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet forum
http://social.technet.Microsoft.com/forums/en-us/winserverwsus/threads
Maybe you are looking for
-
I used to have 6 of Firefox that allow me to advance or go back more than one page
-
random setting on the screen saver
It is probably in the wrong place to ask because it is about Microsoft only, but y at - it an addon to randomly select a screensaver whenever it turns on in XP or 7? Usually, Linux has this built-in, and I was recently asked this by two separate peop
-
win with error code update 64 c (only when trying to install MS update silvelight)
I have already seek and find some answers useful, but without any results. In windows update every time I try to install the update, I get error code 64 c (only for silverlight)If I try to install it with the exe file via the official website says th
-
How to add items to the Windows Explorer right-click menu drop-down?
Sometimes it would be nice to be able to add a shortcut to a program that shows when you right click on a file in Windows Explorer. Is it possible manually? And can we remove others that we never use as well by the same method?
-
I use a computer laptop gateway t-series and have problems with driver installation
Original title: driver installation problems I was running a computer laptop gateway t-series that has windows vista installed. I uninstalled vista and installed xp pro on a disc borrowed from a friend.i did not know at the time where the drivers mus