install the microsoft livecam 1.4 software
I can't install the microsoft livecam 1.4 software using the CD of drivers available. The message I get is "the program is blocked due to compatibility issues". I am using windows 7 on my laptop. I tried to follow the steps online but impossible because it is too tachnical for me.
Please sat down,.
Kind regards
Supriya
There is clearly a conflict between the driver and the operating system. I suspect that the driver was written for an earlier operating system a lot.
The only thing you can try is to install the driver in compatibility mode.
To run in compatibility mode do the following:
Click with the right button on the installer > properties > compatibility > chose the operating system
http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows?SignedIn=1
Tags: Windows
Similar Questions
-
How to install the Microsoft Management Console?
Hello
I have a Satellite (S1800-412) with Win XP.
Now I need to install the Microsoft Management Console on, but I have not possibility, because I have only Toshiba CD-ROM product recovery.to install the Microsoft Management Console, I should have the XP installation CD, but I did not.
So my question is:
What can I do with Toshiba CD-ROM product recovery to install on my satellite Microsoft Management Console?I'm trying to understand the policy of Microsoft and Toshiba, but it doesn't look good when I spend much for the XP system and I don't have the cd it wit.
How can I solve my problem?
I need to get an answer as soon as POSSIBLE!
Concerning
Stan
Haha! It's easy:
1. click on run.
2. type in mmc.exe
3. press enter
4. There you are:)
Where is my reward? (:)
-
I have problems to install the Microsoft 2007 12 updates. They all invariably fail with the following error message:
Error details: Code 8007006E
Any ideas on how I can fix this?
I've got Microsoft Vista.
Hi 1proudmama
Welcome to the Microsoft Answers Forum!
We would like to know are these updates on Office 2007I recommend the methods are:
Method 1:
Step 1:
Uninstall the update failed, if she is found in the installed updates, follow these steps
i. open Control Panel from the start menu
II. Select programs and features
III. click Show on the installed update.
IV. uninstall the update failed
Step 2:
Reset the component of windows update and then try to install updates, check if the problem is resolved. It has Fix tool link below will help you with the same
How to reset the Windows Update components: http://support.microsoft.com/kb/971058Step 3:
Install the stand-alone package containing the updates. You can download the stand-alone version of the link with the number of KB below: http://www.microsoft.com/downloads and check if the problem is resolved.Method 2:
Run the SFC (System File Checker) on the computer scan to fix system errors to the file on the computer.
To run a SFC scan, follow these steps:
Open an elevated command prompt. To do this,
i. Click Start,
II. click principally made programs,
III. click Accessories, right-click command prompt,
IV. and then click Run as administrator.
v. If you are prompted for an administrator password or a confirmation, type the password, or click on allow or continue.
VI. at the command prompt, type sfc/scannow and press ENTER. Once the scan is complete, restart the computer so that the changes take effectBelow link for reference: http://support.microsoft.com/kb/936212
Thank you, and in what concerns:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Cannot install the Microsoft fixit 16977927 error code
Original title: error code 16977927
My OS is windows vista, Iam getting the error code 16977927 when I tried to install the Microsoft fix it Center
Hello
I suggest you post your query on the Microsoft fixit center forum:
http://social.Microsoft.com/forums/en-us/fixitcenter/threads
-
Hello
I have a problem with Live meeting 2007. I'm organizing a live meeting with people from different countries. Some of them cannot hear anything and can not use the microphone. They get this kind of error:
"This meeting uses computer audio (VoIP), computer audio is not available with this console, which is based on the Web." To get the audio from the computer, please install the Microsoft Office Live Meeting client. »
I tried to look for a solution, but I did not understand what Live Meeting I need to download.
Can you help me?
Thank you.
Original title: Live Meeting 2007
Hi Alex,
Thanks for posting your query in Microsoft Community.
I understand your concern. In this case, I suggest you refer to the Microsoft TechNet article following which sets out the series of frequently asked questions related to Live Meeting 2007 and check if the solutions are useful.
FAQ: Live Meeting related topics media
Hope this information is useful. Let us know if you need more help, we will be happy to help you.
-
Original title: Microsoft. NET Framework 4 client for windows 7 X 64 profile base system
I'm unable to install the Microsoft. NET Framework 4 client for windows 7 X 64 profile base system.
Any ideas?
Thank you.
Hello
Thanks for posting your query on the Microsoft Community.
I understand that you have a problem with the installation of Microsoft. NET Framework 4 client profile. I will certainly help you in this matter.
Provide us the following information to better help you.
Have you made changes on the computer before this problem?
You receive an error message/code?
Follow the below methods:
Method 1:
The .NET Framework 4 Client Profile is available on Windows Update
http://support.Microsoft.com/kb/982670Follow the method 1 and method 2 in the article and check for the issue. If the problem remains same follow method 2.
Method 2:
Disable the .net framework Windows feature on or off, follow these steps:
a. click the Start button, select Control Panel, click programsand then click Windows turn on or off features. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
b. to turn off .net framework, click the media feature. And the .net framework and click OK.
c. restart the computer to apply the changes.
Note: follow the steps above to activate or activate the .net framework and check if the problem occurs.
For more information, refer to this link turn Windows features turn on or off:
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off
Please let us know if you need more assistance.
Thank you.
-
I get the following errors when I am trying to download a test version of Dw;
ERROR: DW071:
ERROR: DW003: third payload Installer vcredist_x64.exe failed with exit code:-2147024546
ERROR: Cannot install the Microsoft Visual C++ 2012 Redistributable Package (x 64).
Chat is closed. I would be grateful if someone in the community could help me.
Take a look at this answer Re: third payload Installer vcredist_x64.exe failed with exit code: 2147942750
-
Cannot install the Steelseries Shift NSIS error software
Original title: NSIS error
I try to install the software Steelseries Shift to run the new keyboard that has the world of Warcraft cataclysm, but whenever I get NSIS error and a window that says Steelseries Shift has encountered a problem and needs to close. Basis of keyboard keys work, however, we are unable to activate any game due to the failure of the download process.
Hi electricfreddie,
· What is the exact error message?
Follow these methods.
Method 1: Follow the steps in the article.
Problems installing and uninstalling programs on Windows computers
http://support.Microsoft.com/kb/2438651
Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
-
Cannot install the printer esp3 on computer software-
Downloaded software gives up to halfway through the installation. Manufacturer told me to change the settings on the computer but I don't know the password or username to my computer, because it belonged to my grandson, is several years old. How can I get the system administrator to change the password so that I can access? Or y at - it another way to fix the installation process?
Hello
· What is the exact error message that you encounter when you install the software on the system?
If you are not the system administrator, then you cannot install any program on the system and unfortunately, the technical support engineers Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the sticky below.
Microsoft's strategy concerning lost or forgotten passwords
http://support.Microsoft.com/kb/189126
I suggest you to check with your grandson if it can help you with the user name and password.
-
Cannot install the Microsoft MDL Bluetooth keyboard 1002
Original title: will not install bluetooth devices
My Windows Vista 64 - bit PC will not install my Microsoft bluetooth keyboard 1002 MDL keyboard and cannot find the software to do it. I made the matching, and removesd keyboard bluetooth devices list THOUSANDS of times. So don't go in that direction. You have the intelligence to help me?
Hi Alfred,
Thanks for posting your question in the Microsoft Community.
I understand that you can not install Microsoft Bluetooth keyboard 1002 MDL. Correct me if I'm wrong.
I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:
1. you receive an error code or message?
2. have you made any recent hardware or exchange of software on your computer before the show?
Please follow the methods and mark the question below:
Method 1:
Follow the steps in the link below.
Mouse, touchpad and keyboard with Windows problems:
http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-WindowsMethod 2:
Follow the steps in the link below.
Resolve the failure of mouse or a Bluetooth keyboard to function
http://support.Microsoft.com/kb/811798Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.
-
Cannot install the Microsoft stack - necessary for BlackBerry
Hello
I'm going through Toshiba BT stack (which works fine) of Microsoft, as my new BlackBerry requires the Microsoft stack. I have a Tecra M5.
If I uninstall the Toshiba Bluetooth stack, Microsoft it does not install and actually no device appears in Device Manager, even with an exclamation by it. I tried to install the Bluetooth Monitor 2 program, but seems not to do anything (no icon). I don't know if it's related, but although the program Wireless Hotkey is instaled, Fn + F8 does nothing.
Any suggestions welcomed, as I spent some time today trying to persuade this work, including following some of the suggestions on this forum without success, unfortunately.
William
No one has any suggestions?
I went back to the Toshiba stack so that I can use my other PDA, but I'll have to use the cable for the BB, so I want to fix the problem again...
William
-
Cannot install the Trusted Platform Module Driver / software
I am not able to install the driver of the TPM secure and so I'm not able to install the TPM software... I have a satellite u200, and it's on my tools and utitilities cd. Installation always says "Trusted Platform Module not found" someone at - it the same problem?
Hello
Have you checked the BIOS settings? Maybe the TPM must be enabled first.
-
How to install the Microsoft wireless mouse no CD on Vista
How to install Microsoft MODEL: 1052, mouse wireless laser 6000 with no CD on Vista Premium version? Currently I have a wired mouse which I think should be disabled, but the first is that it was necessary to install the wireless? Your help would be greatly appreciated.
Hello
You are welcome. Please let us know if you find any question, we will be happy to help you more.You can also contact the hardware support. -
Fatal error when installing the Photosmart all-in-one software on Windows 7 x 64 for printer C4385
Hello
I had to reformat one of my laptops and as a result, reinstall the Photosmart software & drivers for my printer C4385. I downloaded the software from the HP website (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76047-2&cc=us&dlc=en&lc=en&... =).
However, during the installation, I get on a fatal error in the last step, "product Configuration". I uninstalled and reinstalled several times with the same result. As you can imagine, I am really frustrated and seeks help from the community to solve this problem. Here is a screenshot of the error. Your help in solving this problem is greatly appreciated.
Hello
I see that you have a problem with the printer.
I suggest you to install the software one. Go ahead and uninstall the software first and then follow the instructions below.
You should get to a point in the facility, which looks something like this. Please click on the area where the yellow arrow.
Once you do, it will look like this. Please install each driver one by one, starting with the first options which is the printer driver. You have to disable each option, that some of these drivers will not let you uncheck which is very good.
Once its finish, you can go back and do the following installation.
Let me know the results.
-
Cannot install microsoft fix - it Center... is not a valid directory name
Hello CarolSummer,
This thread has been created in the Windows Vista forum install, level and activation; the Microsoft moderation team has moved this thread in the forum Maintenance and performance of Windows Vista.
Maybe you are looking for
-
An unexpected error has occurred.Click the node server reset to try to connect to the server again Event type: errorEvent source: Windows Server Update ServicesEvent category: noEvent ID: 7053Date:Time:User: n/aComputer:Description: The WSUS administ
-
How do burn you a DVD, Media Player does not read a blank disc
How to burn a DVD in Windows Media Player or Windows XP Professional with a burning software free when my DVD / CD drive does not read a blank DVD
-
Error 641, & 0x80000ffff
Problem with error 641, try everthing still not able to update.
-
HelloI have a little questions about the le parameters option HAIP redundant Interconnection offered since version 11.2.0.2 and later on the GI.Reading some MOS Note () NOTE: 1210883.1 - Grid Infrastructure redundant Interconnect and ora.cluster_inte
-
No wifi after W10. Only bluetooth icon taskbar.
Trying to be certain, I have all the drivers W10... If you use the system detect that, I don't think that works. Trying to fix: Start your computer to the Ethernet connection... and a bluetooth icon in the taskbar, near the clock. If I try to go wi