Install the program two computer

Similar Questions

• My laptop was stolen. The CreativeSuite has been installed. I also have programs on my Mac work in the office. When I buy a new laptop, I have to install the programs on the third computer. Is this possible? What can I do?

  My laptop was stolen. The CreativeSuite has been installed. I also have programs on my Mac work in the office. When I buy a new laptop, I have to install the programs on the third computer. Is this possible? What can I do?

  Hello

  You can install and activate the perpetual software (purchased) two computers of the same type (mac or pc), as long as you use it on one at a time.

  For deactivation refer:- https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

  If you do not have access to your old computer because you have replaced a hard drive, upgraded your operating system to format your computer before you deactivate your software or your computer is dead, you can ask Adobe Support to help you disable from a machine, you cannot access. Have your serial number or Adobe ID ready, then contact us.

  To load the software on another computer, download and install it as you did on the first computer. Then enter your serial number to activate it.

  You can also see: -.

  https://helpx.Adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

• Computer attempts to install the program "YouSendIt" which is uninstalled, but appears in the programs?

  computer works constantly trying to install the program, error 1721.   I can't uninstall the program that appears in the programs, said it cannot do.  It happened when I changed the date of the restoration when I installed the program.  I uninstalled the program, but it continues to show in programs.   I can't go into the Add/Remove software at all.

  Hi, Skybill2000,

  1721 error may appear when you try to remove programs by using Add / Remove programs in Windows XP

  http://support.Microsoft.com/kb/891985

  Windows registry backup first, and then follow the steps listed here.

  http://www.removespywareguides.com/YouSendIt-exe-how-to-remove.html

• Hi my old Paolo broke and I need to install the program on my new computer how can I do this?

  Hi my old Paolo broke and I need to install the program on my new computer how can I do this?

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

• I recently bought Lightroom and installed on one of my computers. I tried to install the program on another computer, I, using the same serial number that I already bought and I am not accepted as it says that the SN is invalid. What should I do?

  I recently bought Lightroom and installed on one of my computers. I tried to install the program on another computer, I, using the same serial number that I already bought and I am not accepted as it says that the SN is invalid. What should I do?

  It is possible that you downloaded the demo of creative cloud of Lightroom. The perpetual license key will not work. Uninstall the version on the second computer, it doesn't bother your catalog, preferences and personal files.

  Download the appropriate version from the link below and install them, your license key is accepted and everything will be fine.

  Updates

• I bought a new computer and downloaded my lightroom 4 to it. When I installed the program it asked for my serial number and I impujted it. Then he asked my previous serial number of my purchase of lightroom 3. Since I upgraded to ligtroom 4 I

  I bought a new computer and downloaded my lightroom 4 to it. When I installed the program it asked for my serial number and I charged it. Then he asked my previous serial number of my purchase of lightroom 3. Since I upgraded to lightroom 4 I don't have the serial number for the version 3. How can I get the serial number of my version 3 so I can activate my program version 4

  If you have Lightroom 3 is still installed, you can get it from there.

  If you do not and you have your box/drive, it should be there.

  IF you do not have one of the people, and you have registered your software, you can log in to your Adobe account and get it there.

• Error message: windows\system32\difxapi32.dll isn't is either not designed to run on windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for

  Hello

  I keep getting error messages when I use the computer. It started two days after you download an update from Windows. A sample of the error is:

  C:\windows\system32\difxapi32.dll is not designed to run on windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.

  I use a vista. I don't know how to solve this problem, many want to help.

  Thank you.

  Hi Colinthebrave:

  Start with this little tool to help get rid of the error, once your system is stable again and then try to run your updates again.

  Thank you for your message; Let us know how it goes.

  o

  o The System Restore tool

  If the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose another restore point and then click Next.

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4. click on finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Don
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What user install the program

  How do I know which user to install the program in the pc

  I have a lot of user has permission to install program how do I know which user it

  There are two metholds:

  Check the application log in Event Viewer and look for the MsiInstaller in the source field. If you check the details of the event, you can see that this event belongs to which user. Or if you know the program installation folder, and there is, on this partition, NTFS file system, see the current owner of the installed program folder. (right click on the folder, select Properties, Security tab, click the special tab then owner) Who holds this record, he has created, so did the installation.

• Microsoft Security Essentials is taking 8-10 hours to scan my 25 GB hard drive? Just re-install the program

  I have 25 GB of documents on my computer of 250 GB.

  It takes 8 to 10 hours to do a full scan of the system.

  It is way to long for a machine with 4 GB of memory

  Re-install the program?

  What transfer mode is used?

  http://www.MakeUseOf.com/tag/check-your-transfer-mode-to-boost-computer-speed/

  Before you run common analyses on large capacity drives, it helps to run cCleaner to reduce the number of files to check:

  A better program of disk cleanup is cCleaner. Delete System Restore points may be important if you have little free disk space. The ability to delete them is one of the tools options. You can selectively remove those created in less important moments.

  cCleaner also comes with a registry tool. Do not use this tool as any registry cleaner could lead to the creation of very difficult to resolve system errors.

  http://www.CCleaner.com/download

• I have no volume and also States that is not designed to run on windows or it contains an error. Told me to try to install the program with the help of original installation.

  c:\windows\winsxs\x86_microsoft. VC80.crt_... and so on is not designed to run on windows or it contains an error.  Try to install the program using original install.

  Hello

   
  1. have you installed the driver of sound card on the computer?
  2 is not available for a particular program or windows sound?
   
  Step 1: If you have not installed the sound card driver, then please visit the system manufacturer's Web site and download the driver audio compatible Vista and install it.
   
  For more information on "Hunting the drivers" visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/the-hunt-for-drivers-how-to-find-Windows-Vista-drivers-for-all-your-hardware
   
  Step 2: If you have installed the driver for sound card and there is no sound on the computer, try the following steps.
  1 visit the following link and click on "Run now" to diagnose and fix audio playback problems: http://support.microsoft.com/gp/no_sound
  2. If the problem persists, visit the system manufacturer's Web site and download the driver audio compatible Vista and install it.
   
  Check this "Tips to solve common sound problems": http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-sound-problems
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Error: _ "Sidebar.exe - bad image"__windows/system32/sfc.dll is not designed to run on windows or it contains and error. " Try to install the program by using the original installation media or contact your system administrator. __

  Help, please!
  I started my computer today and it came with this error:

  "sidebar.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  I click on OK, then he said:

  "Acrotray.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  I click OK and then it says:

  "hpqtra08.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  Also I got an error report saying that windows sidebar stopped working.

  My computer is VERY slow in all the commands I give.
  I also tried to run the sfc (System File Checker command) and acts like he is going to run the program, but then just closed.

  Do you have an idea what is happening with my computer and what I can do to fix this?

  Thank you very much!

  Hi deacon829,

  You did changes to the computer before that happened?

  Step 1: Start the computer in safe mode and check if the problem persists, to do this, follow the steps below,

  Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. In the advanced startup options select safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2: If you try to install any application before this program, try to uninstall them.

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  If this solves the problem, you can deduct that the demand is probably corrupted, damaged or incompatible. You can check with the manufacturer of the program for more information.

  Step 3: System Restore: System Restore to put the computer's system files to an earlier point in time.

  Look for steps to restore of the system in the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  If the problem persists,

  Step 4: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to install the program in Russian?

  I of the Russia, my English is bad. I created the trial version of Lightroom. How to install the program in Russian?

  If you want to change the language for an application that is already installed on your computer, you will need to change the preferred language, Uninstall and reinstall the application.

  You can do this easily from the creative cloud desktop application. Please see this document for more information:

  Set the installation language.  Applications installed after Exchange of the language will be in the newly configured language.

  Let us know if that helps.

  Concerning

  Megha Rawat

• I already use my code, but I lost the serial number. Now that I've installed the program, I can't buy back again. How can I activate the cloud creative adobe?

  I already use my code, but I lost the serial number. Now that I've installed the program, I can't buy back again. How can I activate the cloud creative adobe?

  Ask the serial number http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  -If you have a non-Cloud program, you must provide the name of the program to learn more

  Some general information for a subscription of cloud

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  http://www.Adobe.com/products/creativecloud/FAQ.html

  http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall

  http://forums.Adobe.com/community/download_install_setup/creative_cloud_faq

  What is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  To start https://helpx.adobe.com/creative-cloud.html the Cloud

  -Installation, update or uninstall and launching after installation

• I CAN'T INSTALL THE PROGRAM

  I'M HAVING A PROBLEM DOWNLOWN YOUR ADOBE READER SOFTWARE. ON MY COMPUTER. A LOT OF TIME, I WANT TO UPDATE THE

  PROGRAM GIVE ME AN ACTIVATION ERROR IT ME SAY SERVICE UNAVALLABLE... SO YOU'RE TELL ME TO UPDATE THE PROGRAM WHEN I CAN NOT INSTALL. I WANT TO INSTALL THE PROGRAM, BUT I NEED HELP. WHY I NEED TO TALK BY PHONE, CAN SOMEONE ME TALK THROUG THE DOWNLOAD. I NEED A PHONE NUMBER.                                                             THANK YOU, MARIAN

  Here are some links to help get in touch:

  http://www.Adobe.com/support/chat/ivrchat.html

  http://www.Adobe.com/support/download-install/supportinfo/

• Can I remove exe from the download folder once I installed the program?

  When I download a program the exe will in my download folder. After I installed the program, delete the exe file in my download folder? My file has become very large and messy.

  Thank you

  Moved from feedback

  Original title: download file

  Yes, you can