Install the same windows on the partition of a

Similar Questions

• Cannot install windows after reset of the partition

  I've literally been sitting to my macbook for the last 10 hours trying to get my bootcamp at work, however after tons of things difficult and research I found online I'm always at a loss. Initially, I had installed windows 7 a few weeks ago for the second time (after that yosemite deleted my previous one during the upgrade) and everything was fine. Then, I took the decision to uninstall my windows because I really wanted to expand the size of my partition, then backed up all my files and used bootcamp to delete windows and re partitioning my hard drive to a single volume. However after this, and then following the same exact steps as before (running bootcamp and sharing in a larger space) once the restarts my laptop that it comes up with the message "No boot device - insert boot disk and press any key" instead start windows automatically load (as it did before). I've repeated several times in the hope that it would work once however I can't help but feel that there is a problem with my hard drive and when I try to check my hard drive (not the 'Macintosh HD' a top one) sometimes - (I say sometimes because it does not say this error when you try to check) said this :

  Audit score card for "APPLE HDD HTS547 * A9E384 Media.

  Checking prerequisites

  Checking the list of partition

  Looking for an EFI system partition

  Checking the size of the EFI system partition

  The EFI system partition file system check

  Check the contents of the folder on the EFI system partition

  Problems were found with the partition plan that may prevent startup

  Error: A disk with a mount point is required.

  and yet when I performed the same task again 2 minutes later he says:

  Audit score card for "APPLE HDD HTS547 * A9E384 Media.

  Checking prerequisites

  Checking the list of partition

  Looking for an EFI system partition

  Checking the size of the EFI system partition

  The EFI system partition file system check

  Check the contents of the folder on the EFI system partition

  Audit of all areas of charger data HFS partition

  Audit of the partitions to boot

  Checking boot partition disk0s4

  Check the file system.

  HFS volume logged more control.

  Check the overflow file extensions.

  Check the file catalog.

  Checking multiple files linked.

  Check the catalog hierarchy.

  Check the extended attribute file.

  Checking volume bitmap.

  Check the volume information.

  The volume Recovery HD seems to be OK.

  File system check exit code is 0.

  Verification of the physical Volume of basic storage partitions

  The partition plan seems to be OK

  (and just for the record more when I check macintosh hd, fine):

  Check the volume "Macintosh HD"

  Check the file system.

  Using the live mode.

  Perform direct verification.

  HFS volume logged more control.

  Check the overflow file extensions.

  Check the file catalog.

  Checking multiple files linked.

  Check the catalog hierarchy.

  Check the extended attribute file.

  Checking volume bitmap.

  Check the volume information.

  The volume Macintosh HD appears to be OK.

  File system check exit code is 0.

  I'm really not good when it comes to such things, so this information can be totally irrelevant, sorry! I had originally check my volumes a recovery when yosemite initially deleted to repartition my hard drive and reinstall windows. I really don't know what to do, any help would be appreciated. I have no knowledge in this subject what so ever but I feel that my hard drive is damaged somewhere (even if yosemite still works perfectly and all my files appear to be intact) or for some reason my boot loaders do not work...

  I can provide more information if necessary, but quite frankly, I have no idea what I'm doing.

  Thank you for taking the time to read this if you have!

  1. do you use a USB key to install Windows?

  2 can you post the output of the following OSX Terminal commands?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• I can create a system recovery disk that gets installed and updated Windows 7, not the preinstalled HP Vista recovery Partition?

  I have a laptop HP HDX 18 that had 64-bit Windows Vista installed, with a Vista recovery on his C drive Partition.  Since then, I installed clean 64-bit Windows 7 Professional of his Microsoft licensed DVD, that I still have.  I kept with all (200 +) of Windows updates.

  Now, I want to create a system (Flash drive) for this laptop recovery disk, but my concern is that he will lead the recovery in its Partition Vista original, installed at the factory.   If I use W7 administration tools installed to create a system recovery disc, it will recover the old Windows Vista or Windows 7?  In addition, it would be nice to have a system recovery disk that had the latest W7.

  I'm not looking to install the drive link below; However, I prefer the system recovery disk to restore my laptop to its W7 system most recently updated, rather than start over.

  http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-7

  What choices do I have?  Where can I find the appropriate instructions?

  Thank you very much for your help!

  If you are the same person, you use 2 different profiles, not the same profile.

  Sunspirit and jhughey are 2 different profiles.

• Install the new partition in Windows XP

  Hello, is it possible to install an extra partition of Windows XP on my laptop with the recovery dvd satellite? I wish I had 2 win XP partition, and then choose the desired win XP. It will be used to have a stable win XP and a win XP that can be used for insalling and try new software.
  Thank you
  Pierre De Ceuster, Belgium

  Hello

  You can use the recovery CD to create two partitions, but before do you these record all the data because the whole HARD disk will be formatted prior to installation. If you want to do this without reinstalling the operating system persistence, use Partition magic software. It is very powerful tool.

  Don t forget to install the boot manager that allows you to choose which operating system you want to use.

  Good bye

• I had installed windows 8.1 with bootcamp, it was a c drive and I tried to do a second drive d with management of the disks, but when I shrink c drive and format the partition which was made by the management of the disks to d ' training, it destroyed my

  I use macbook pro.

  I had installed Windows 8.1 with bootcamp, that there was a c drive, then I tried to do the second drive with disk management d when I shrink the c drive and format the partition which was made by the management of the disks to d ' training, it destroyed my mac osx.

  Please help solve this problem.

  This partitioning is not supported. Please download GPT Fdisk from http://sourceforge.net/projects/gptfdisk/ and install it on the Windows side. Once it is installed, thanks for posting the output as indicated in the CMD window.

  

• Blue screen occurs when you try to install the same updates of Windows

  I tried to install the update of same windows 3 times and everytime I try a blue screen error occurs. I downloaded the files to skydrive .dmp please find the link below, would be very grateful if someone could clear this up for me:

  http://CID-8b34ffce079642d1.SkyDrive.live.com/redir.aspx?RESID=8B34FFCE079642D1! 215

  Seems to be a problem with McAfee Antivirus. I would like to start trying to update McAfee to the latest version and see if that allows you to install the updates. If this does not work, then try disabling McAfee and see if updates through. If this isn't the case, then you must remove McAfee and install another AV, such as MSE http://www.microsoft.com/Security_Essentials/ and see if updates through.

  Analysis of error checking * * use! analyze - v to obtain detailed debugging information. Error checking 24, {1904aa, fffffa601544fd58, fffffa601544f730, fffff800026a8efd} failed to load image \SystemRoot\system32\drivers\mfehidk.sys, 0n2 error Win32 * WARNING: unable to verify timestamp for mfehidk.sys * ERROR: Module load completed but symbols could not be loaded for mfehidk.sys probably caused by: Ntfs.sys (Ntfs! TxfLogPriorToWrite + bcf) follow-up: MachineOwner - 1: kd > ! analyze - v * * analysis Bugcheck * * NTFS_FILE_SYSTEM (24) If you see NtfsExceptionFilter on the stack, then the parameters 2 and 3 are the registration of exception and a context record. Do a .cxr on the 3rd parameter can KB in order to get a more informative stack trace. Arguments: Arg1: 00000000001904aa Arg2: fffffa601544fd58 Arg3: fffffa601544f730 Arg4: fffff800026a8efd debugging Details :---EXCEPTION_RECORD: fffffa601544fd58-(.exr 0xfffffa601544fd58) ExceptionAddress: fffff800026a8efd (nt! KiUnwaitThread + 0 x 0000000000000019) ExceptionCode: c0000005 (access violation) ExceptionFlags: 00000000 NumberParameters: parameter 2 [0]: 0000000000000000 parameter [1]: ffffffffffffffff attempt to read from address ffffffffffffffff CONTEXT: fffffa601544f730-rax (.cxr 0xfffffa601544f730) = fffffa601544ffb8 rbx = fffffa8005d84200 rcx = rdx eb00084630e8c933 = rsi 0000000000000100 = fffffa601544f210 rdi = 0000000000000000 rip = fffff800026a8efd rsp = fffffa601544ff90 rbp = fffffa8005d84278 r8 = 0000000000000000 r10 = 00000000000001 c 8 ffffffffffead530 = r9 r11 = 00000000000007ff r12 = 0000000000000000 r13 = 0000000000000001 r14 = 0000000000000000 r15 = c 000000000000000 iopl = 0 nv ei ng nz na po nc CS = 0010 ss = 0018 ds = 002 b're = 002 b fs = 0053 GS = 002 b efl = 00010286 nt! KiUnwaitThread + 0 x 19: fffff800'026a8efd 48099180000000 or qword ptr [rcx + 80 h], rdx ds:002 b: eb000846'30e8c9b3 =? Reset the scope by default CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT nom_processus: TrustedInstalle CURRENT_IRQL: ch. ERROR_CODE: (NTSTATUS) 0xc0000005 - the instruction at 0 x % lx 08 referenced memory at 0 x % 08 lx. The memory could not be % s. EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - the instruction at 0 x % lx 08 referenced memory at 0 x % 08 lx. The memory could not be % s. EXCEPTION_PARAMETER1: 0000000000000000 EXCEPTION_PARAMETER2: ffffffffffffffff READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002838080 ffffffffffffffff FOLLOWUP_IP: Ntfs! TxfLogPriorToWrite + bcf fffffa60'0103a1c1 483bdb cmp rbx, rbx FAULTING_IP: nt! "KiUnwaitThread + 19 fffff800'026a8efd 48099180000000 or qword ptr [rcx + 80 h], rdx BUGCHECK_STR: 0 x 24 LAST_CONTROL_TRANSFER: from fffff8000261b3cc to fffff800026a8efd STACK_TEXT: fffffa60 '1544ff90 fffff800' 0261b3cc: fffffa80 '05 d 84200 fffffa80' 05 d 84278 fffffa60 ' 1544f210 00000000' 00000000: nt! "KiUnwaitThread + 0 x 19 fffffa60 '1544ffc0 fffff800' 0268cbbe: 00000000 ' 00000000 fffffa80 ' 05dd0480 fffffa60'15450120 00020001'00000004: nt! : FNODOBFM: 'string' + 0x277f0 fffffa60 ' 15450080 fffff800' 02690613: fffffa60' 154501a 0 00000000'00000000 00000000'00000000 00000000'00000000: nt! "KiDeliverApc + 0x19e fffffa60 ' 15450120 fffff800 ' 0263ca 99: fffff880 00000000'00004000 00000000'00004000 ' 13e27760 00000001' 00000000: nt! KiApcInterrupt + 0 x 103 fffffa60 '154502b 0 fffffa60' 0103a1c1: fffffa80'05c070d0 fffffa80 '08844-70 fffff880' 13e27760 fffffa60'15450380: nt! ExReleaseFastMutex + 0 x 29 fffffa60 '154502e0 fffffa60' a 01012, 81: fffffa80 ' 08844a 70 fffffa60 '154507b 0 fffffa80' 05c070d0 fffffa80 ' 05c070d8: Ntfs! TxfLogPriorToWrite + 0xbcf fffffa60'154505 has 0 fffffa60'01015433: fffffa80 '05c070d0 fffffa80' 05ab8450 fffffa60 ' 15450700 fffffa60' 15450701: Ntfs! "NtfsCommonWrite + 0 x 2878 fffffa60 ' 15450780 fffffa60 ' 00b14e91: fffffa80 ' 05ab87a8 fffffa80 '05ab8450 fffffa80' 08844a 70 fffffa80 ' 05a4a200: Ntfs! "NtfsFsdWrite + 0x1c3 fffffa60 ' 15450840 fffffa60 ' 00b130dd: fffffa80'068d9de0 fffffa80 '08844-70 fffffa80' 068d9d00 00000000' 00000000: fltmgr! FltpLegacyProcessingAfterPreCallbacksCompleted + 0 x 211 fffffa60 '154508b 0 fffffa60' 00bb5034: fffffa80 '05ab8450 00000000' 03843f01 fffffa80 '05ab8450 fffffa80' 05ab8450: fltmgr! "" "" "FltpDispatch + 0xcd fffffa60 ' 15450910 fffffa80 ' 05ab8450: 00000000' 03843f01 fffffa80'05ab8450 fffffa80 '05ab8450 fffffa80' 05d256e0: mfehidk + 0 x 48034 fffffa60'15450918 00000000' 03843f01: fffffa80'05ab8450 fffffa80 '05ab8450 fffffa80' 05d256e0 00000000 00000000': 0xfffffa80'05ab8450 fffffa60 ' 15450920 fffffa80 ' 05ab8450: fffffa80'05ab8450 fffffa80 '05d256e0 00000000 00000000' fffffa80' 066aaa90: 0x3843f01 fffffa60 ' 15450928 fffffa80" 05ab8450: fffffa80'05d256e0 00000000 00000000' fffffa80 '066aaa90 fffffa80' 068d9de0: 0xfffffa80'05ab8450 fffffa60 ' 15450930 fffffa80 ' 05d256e0: 00000000 ' fffffa80 00000000 '066aaa90 fffffa80' 068d9de0 fffffa80 "05ab8450 : 0xfffffa80'05ab8450 fffffa60'15450938 00000000 00000000': fffffa80 ' 066aaa90 fffffa80 '068d9de0 fffffa80' 05ab8450 fffffa80 ' 05ab87a8: 0xfffffa80'05d256e0 SYMBOL_STACK_INDEX: SYMBOL_NAME 5: Ntfs! TxfLogPriorToWrite + bcf FOLLOWUP_NAME: MachineOwner MODULE_NAME: Ntfs IMAGE_NAME: Ntfs.sys DEBUG_FLR_IMAGE_TIMESTAMP: 49e022ca, STACK_COMMAND: .cxr 0xfffffa601544f730; KB FAILURE_BUCKET_ID: X64_0x24_Ntfs! TxfLogPriorToWrite + bcf BUCKET_ID: X64_0x24_Ntfs! TxfLogPriorToWrite + bcf followed: MachineOwner - 1: kd > .exr 0xfffffa601544fd58 ExceptionAddress: fffff800026a8efd (nt! KiUnwaitThread + 0 x 0000000000000019) ExceptionCode: c0000005 (access violation) ExceptionFlags: 00000000 NumberParameters: parameter 2 [0]: 0000000000000000 parameter [1]: ffffffffffffffff attempt to read from address ffffffffffffffff 1: kd > rax .cxr 0xfffffa601544f730 = fffffa601544ffb8 rbx = fffffa8005d84200 rcx = rdx eb00084630e8c933 = rsi 0000000000000100 = fffffa601544f210 rdi = 0000000000000000 rip fffff800026a8efd rsp = fffffa601544ff90 rbp = fffffa8005d84278 r8 =. = 0000000000000000 r10 = 00000000000001 c 8 ffffffffffead530 = r9 r11 = 00000000000007ff r12 = 0000000000000000 r13 = 0000000000000001 r14 = 0000000000000000 r15 = c 000000000000000 iopl = 0 nv ei ng nz na po nc CS = 0010 ss = 0018 ds = 002 b're =. 002 b fs = 0053 GS = 002 b efl = 00010286 nt! KiUnwaitThread + 0 x 19: fffff800'026a8efd 48099180000000 or qword ptr [rcx + 80 h], rdx ds:002 b: eb000846'30e8c9b3 =? "1: kd > kv * for the last value context-.thread/.cxr stack trace it resets child-SP RetAddr: Args to child: call fffffa60 '1544ff90 fffff800' sites 0261b3cc: fffffa80 '05 d 84200 fffffa80' 05 d 84278 fffffa60 ' 1544f210 00000000' 00000000: nt! "KiUnwaitThread + 0 x 19 fffffa60 '1544ffc0 fffff800' 0268cbbe: 00000000 ' 00000000 fffffa80 ' 05dd0480 fffffa60'15450120 00020001'00000004: nt! : FNODOBFM: 'string' + 0x277f0 fffffa60 ' 15450080 fffff800' 02690613: fffffa60' 154501a 0 00000000'00000000 00000000'00000000 00000000'00000000: nt! "KiDeliverApc + 0x19e fffffa60 ' 15450120 fffff800 ' 0263ca 99: fffff880 00000000'00004000 00000000'00004000 ' 13e27760 00000001' 00000000: nt! KiApcInterrupt + 0 x 103 (TrapFrame @ fffffa60'15450120) fffffa60 '154502b 0 fffffa60' 0103a1c1: fffffa80'05c070d0 fffffa80 '08844-70 fffff880' 13e27760 fffffa60'15450380: nt! ExReleaseFastMutex + 0 x 29 fffffa60 '154502e0 fffffa60' a 01012, 81: fffffa80 ' 08844a 70 fffffa60 '154507b 0 fffffa80' 05c070d0 fffffa80 ' 05c070d8: Ntfs! TxfLogPriorToWrite + 0xbcf fffffa60'154505 has 0 fffffa60'01015433: fffffa80 '05c070d0 fffffa80' 05ab8450 fffffa60 ' 15450700 fffffa60' 15450701: Ntfs! "NtfsCommonWrite + 0 x 2878 fffffa60 ' 15450780 fffffa60 ' 00b14e91: fffffa80 ' 05ab87a8 fffffa80 '05ab8450 fffffa80' 08844a 70 fffffa80 ' 05a4a200: Ntfs! "NtfsFsdWrite + 0x1c3 fffffa60 ' 15450840 fffffa60 ' 00b130dd: fffffa80'068d9de0 fffffa80 '08844-70 fffffa80' 068d9d00 00000000' 00000000: fltmgr! FltpLegacyProcessingAfterPreCallbacksCompleted + 0 x 211 fffffa60 '154508b 0 fffffa60' 00bb5034: fffffa80 '05ab8450 00000000' 03843f01 fffffa80 '05ab8450 fffffa80' 05ab8450: fltmgr! "" "" "FltpDispatch + 0xcd fffffa60 ' 15450910 fffffa80 ' 05ab8450: 00000000' 03843f01 fffffa80'05ab8450 fffffa80 '05ab8450 fffffa80' 05d256e0: mfehidk + 0 x 48034 fffffa60'15450918 00000000' 03843f01: fffffa80'05ab8450 fffffa80 '05ab8450 fffffa80' 05d256e0 00000000 00000000': 0xfffffa80'05ab8450 fffffa60 ' 15450920 fffffa80 ' 05ab8450: fffffa80'05ab8450 fffffa80 '05d256e0 00000000 00000000' fffffa80' 066aaa90: 0x3843f01 fffffa60 ' 15450928 fffffa80" 05ab8450: fffffa80'05d256e0 00000000 00000000' fffffa80 '066aaa90 fffffa80' 068d9de0: 0xfffffa80'05ab8450 fffffa60 ' 15450930 fffffa80 ' 05d256e0: 00000000 ' fffffa80 00000000 '066aaa90 fffffa80' 068d9de0 fffffa80 "05ab8450 : 0xfffffa80'05ab8450 fffffa60'15450938 00000000 00000000': fffffa80 ' 066aaa90 fffffa80 '068d9de0 fffffa80' 05ab8450 fffffa80 ' 05ab87a8: 0xfffffa80'05d256e0 1: kd > .trap fffffa60'15450120 NOTE: the trap frame does contain not all registers. Some registry values can be set to zero or incorrect. Rax = 0000000000000000 rbx = 0000000000000000 rcx = rdx fffffa800548cb90 = fffffa800548cb90 rsi = 0000000000000000 rdi = 0000000000000000 rip fffff8000263ca99 rsp = fffffa60154502b0 rbp = fffffa60154507b0 r8 =. = 0000000000000000 r9 = fffff88000841000 r10 = fffff88000186001 r11 = 0000000000000000 r12 = 0000000000000000 r13 = 0000000000000000 r14 = 0000000000000000 r15 = 0000000000000000 iopl = 0 nv up ei pl zr po na nc nt! ExReleaseFastMutex + 0 x 29: fffff800'0263 ca 99 4883c 428 Add rsp, 28 h 1: kd > kv * for the last value context-.thread/.cxr stack trace it resets child-SP RetAddr: Args to child: call fffffa60 '154502 b 0 fffffa60' sites 0103a1c1: fffffa80'05c070d0 fffffa80 '08844-70 fffff880' 13e27760 fffffa60'15450380: nt! ExReleaseFastMutex + 0 x 29 fffffa60 '154502e0 fffffa60' a 01012, 81: fffffa80 ' 08844a 70 fffffa60 '154507b 0 fffffa80' 05c070d0 fffffa80 ' 05c070d8: Ntfs! TxfLogPriorToWrite + 0xbcf fffffa60'154505 has 0 fffffa60'01015433: fffffa80 '05c070d0 fffffa80' 05ab8450 fffffa60 ' 15450700 fffffa60' 15450701: Ntfs! "NtfsCommonWrite + 0 x 2878 fffffa60 ' 15450780 fffffa60 ' 00b14e91: fffffa80 ' 05ab87a8 fffffa80 '05ab8450 fffffa80' 08844a 70 fffffa80 ' 05a4a200: Ntfs! "NtfsFsdWrite + 0x1c3 fffffa60 ' 15450840 fffffa60 ' 00b130dd: fffffa80'068d9de0 fffffa80 '08844-70 fffffa80' 068d9d00 00000000' 00000000: fltmgr! FltpLegacyProcessingAfterPreCallbacksCompleted + 0 x 211 fffffa60 '154508b 0 fffffa60' 00bb5034: fffffa80 '05ab8450 00000000' 03843f01 fffffa80 '05ab8450 fffffa80' 05ab8450: fltmgr! "" "" "FltpDispatch + 0xcd fffffa60 ' 15450910 fffffa80 ' 05ab8450: 00000000' 03843f01 fffffa80'05ab8450 fffffa80 '05ab8450 fffffa80' 05d256e0: mfehidk + 0 x 48034 fffffa60'15450918 00000000' 03843f01: fffffa80'05ab8450 fffffa80 '05ab8450 fffffa80' 05d256e0 00000000 00000000': 0xfffffa80'05ab8450 fffffa60 ' 15450920 fffffa80 ' 05ab8450: fffffa80'05ab8450 fffffa80 '05d256e0 00000000 00000000' fffffa80' 066aaa90: 0x3843f01 fffffa60 ' 15450928 fffffa80" 05ab8450: fffffa80'05d256e0 00000000 00000000' fffffa80 '066aaa90 fffffa80' 068d9de0: 0xfffffa80'05ab8450 fffffa60 ' 15450930 fffffa80 ' 05d256e0: 00000000 ' fffffa80 00000000 '066aaa90 fffffa80' 068d9de0 fffffa80 "05ab8450 : 0xfffffa80'05ab8450 fffffa60'15450938 00000000 00000000': fffffa80 ' 066aaa90 fffffa80 '068d9de0 fffffa80' 05ab8450 fffffa80 ' 05ab87a8: 0xfffffa80'05d256e0 - Mike Burr

• Windows Update continues to install the same update over and over again

  Windows Update will continue to install the same update again and again for about a week now. He always says the update was installed successfully but in 2 minutes windows update wants to install the same update again. I went directly to Microsoft to check updates and it shows me who need the update even again in the history of the update, it shows the update installed successfully at least 10 times. Update for Microsoft security update

  .NET framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2446708) (update 1 of 1)...

  Hello

  I had exactly the same problem and it resolved the response in this thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/security-update-for-microsoft-net-framework-4/f7c1fbbb-8c66-e011-8dfc-68b599b31bf5

  Why don't give you it a try?

  I hope that helps!

• Install the EFI on new SSD partition when doing 10 costs of Windows Installer

  I have a similar problem to this topic. Windows was originally (and still is) installed on my HARD drive and I just installed my SSD recently. When I did a clean install of Windows 10 on my new SSD it has not installed the EFI partition.

  Is there a way to create a new partition on the SSD EFI (of course I have to do another new facility) or do I have to physically unplug my HARD drive before you begin?

  my personal rule, I always disconnect a disk with a partition bootable OS, just to reduce the troubles and do not mix the boot managers (I prefer to select the BIOS boot device)

• my laptop came with windows media center vista 64-bit, please help to install the same OS that I don't have installation dvd or I restore partion work.

  I bought the laptop United States & the model no is Pavilion dv4-1120us. Pls help me to restore or to get my system back BONES & also let me know if I can upgrade to windows 7 or not, once I am able to recover my original OS.

  Hi Pavan,

  Please answer these questions so that we can properly diagnose the problem, and to help you, as a result.

  1. the operating system does not work properly? What exactly is the problem you are having?

  2 did you receive any disk partition recovery with the computer?

  I suggest you contact HP support to obtain the recovery partition disk and for aid to restore the computer to its factory settings.

  If you want to re - install Windows Vista, check out this link:

  Installation and reinstallation of Windows Vista
  http://Windows.Microsoft.com/en-in/Windows-Vista/installing-and-reinstalling-Windows-Vista

  If you want to upgrade to Windows 7, see these articles:

  Upgrading to Windows 7
  http://Windows.Microsoft.com/is-is/Windows7/products/upgrade

  Upgrade Windows Vista to Windows 7
  http://Windows.Microsoft.com/en-in/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  Please get back to us with the results.

   

  If you have questions about Windows operating systems, help us on this forum. We are happy to help you.

• updated Windows SP1 downloaded fine, but I still get notified to install the same thing over and over again... What's new.

  updated Windows SP1 downloaded fine, but I still get notified to install the same thing over and over again... What's new.

  Hello

  I understand that you are warned to install the update even repeatedly. I'll be happy to help you with this problem.

  (1) did you do changes on the computer before this problem?

  (2) you have Service Pack 1 installed on your computer successfully?

  (3) are you advised to re - install the Service Pack 1 update again?

  (4) you receive an error message when you try to install Service Pack 1?

  Method 1: I suggest you run Microsoft FIXIT from the link and if the problem persists.

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  Method 2: I also suggest you to follow the steps from the link and check if it helps.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

  For reference:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  I hope this helps. Try the above steps and get back to us for assistance. We will be happy to help you.

• WINDOWS UPDATE I have install the same updates

  Recently, I have restored my computer Windows Vista to factory default.  I loaded all updates (a few at a time) and all have been completed successfully.  Now, it looks like WINDOWS UPDATE is having me reinstall the same updates, as they reappear on the list of updates to be added.  Please tell us what to do.

  You receive errors related to updates?

  1. Open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. In the left pane, click view update history.
     http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed
  3. Find an update for Windows that has failed to install, and then double-click the update to view more information.
     Updates that have failed to install will display failed under status, next to the name of update.
  4. In the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.
  5. Follow the links in the Windows Update dialog box under more information or help and Support to resolve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.

  Windows update General troubleshooting

  Suggestions:

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Diagnose and automatically fix common problems with Windows Update
  http://support.Microsoft.com/mats/windows_update/

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339/

• Windows update repeated says to install the same updates

  OS = vista.
  RE: new updates available
  selected for update.
  Windows says it's installing the updates.
  check "installed updates".
  updates listed.
  These are the updates:
  Update of security for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2518870)
  Update of security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2572078)
  Update of security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2633870)
  Update of security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2656351)
  Updated for MICROSOFT.NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2468871)
  Updated for MICROSOFT.NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2533523)

  Says Windows usually updates installed and ready to turn it back on - it did not.
  The new window updates, explains all the updates above are available and does not seem to recognize that they have already been "installed".
  Suddendly machine may not be used, any open window says "not responding".
  Tried to install the updates again, but same as above.
  Restart the computer.
  I got Thunderbird open and does not and used Firefox to try to access this forum.
  Firefox picked up trying to open on this forum and said not reponding.
  Same as above, nothing had changed and unable to use what whatsoever.
  Uninstalled all the above recent updates.
  The machine works again instantly.
  Open Firefox to access forum, he reported problems with the last session on this site and so I started a new session.
  Everything works well and fast.

  If I look at 'review your update history'
  All the updates mentioned above are presented as successfully installed twice.
  If I look at "the new updates are available," all the installed and then uninstalled updates are listed.

  So before I try to install the updates listed above again, what known problems are there regarding their.
  Why do you have the "check updates insist I had not installed?"
  Why updates has not asked to restart the computer?
  Why install the updates above make it impossible to use any programs?

   

  Hello

  Method 1:

  Run the troubleshooting utility from the link below and see if that helps:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

   

   

  Method 2:

  SFC scanner. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.

  Scan sfc enforcement procedure:
  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  b. click on continue or provide administrator credentials if prompted.
  c. in the type in the following command prompt window and press ENTER:
  sfc/scannow

  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833

• How can I stop Windows Update to install the same facilities again and again

  Why keep Windows Update install the same updates again and again

  Why keep Windows Update install the same updates again and again

  See: http://support.microsoft.com/kb/910339 -
  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  Or in the alternative, notify us of updates and maybe we can move forward.

• Why Windows asks me to install the same updates several times. Often several times the same updates and often several times in the same day?

  I install security updates and important. Sometimes in the same day, I wonder to install the same updates. When I check the history I see that they are already installed. This can happen several times in the same day.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  UTC/GMT is 00:34 Sunday, March 11, 2012

• Windows XP is installed on C: / and Windows Vista on E:. Is it safe to delete the partition of Windows XP? I'll still be able to boot Windows Vista?

  I have a 500 GB sata HDD and it is partitioned into 4 volume (C: E: - 97 GB, d - 122 GB, GB-122, F: - 123 Go). my windows xp is installed in the C drive
  and I recently install windows vista on the E drive.

  is - it safe format the c drive where windows xp is installed?

  If I format it will damage my system?

  original title: Dual Boot Format

  Hello

  It is not safe to remove Windows XP from drive C. If an earlier version of the Windows operating system is installed in a dual-boot with Windows Vista or Windows 7 configuration, the Windows Boot Manager program transfers control to the Ntldr program for the earlier version of the Windows operating system.

  If you remove Windows XP, you may not be able to start Windows Vista as well.

  Refer to: http://support.microsoft.com/kb/919529

  The ideal way is to reinstall Windows Vista.

  Note: Be sure to back up data before formatting the hard disk.

  See: http://windows.microsoft.com/en-US/windows-vista/Installing-and-reinstalling-Windows-Vista