Install the software not found on my OfficeJet Pro 8000 wired Ethernet network

Similar Questions

• Ink levels HP Officejet Pro 8000 809

  Why can't determine the ink levels on my HP Officejet Pro 8000 with the tab printer HP Print and Scan Doctor?

  Hello HPPete,

  Welcome to the HP Forums.

  I see that you are having a problem with getting the HP print and scan from doctor to show ink levels. I will try to help you with this.

  To start, make sure that the version of the PSDR that you are using is the most recent. It should be version 4.3.

  Then the word "printer" will be grayed out in the top of the window until you have selected your printer and you press Next. To be able to use the drop-down list, you must be on the screen that shows "The difficulty of printing" / "Fix scan."

  Once on this screen, you should be able to use the drop-down list and choose "ink levels". This will display the information of ink on another screen for you.

  If you have found that up to now, and the ink level are not displayed, then there may be communication problems. Please let me know if this is the case.

  I have also two other ways for you to check out ink levels using the PSDR.

  This 'check ink levels' document will show you how to print a test page, which has information about ink and levels.

  You can also use the HP Solution Center.  If it is installed on your computer, you should be able to open it and click on your printer icon view ink levels.

  Please let me know if this was useful for you.

  Thanks for posting on the HP Forums.

• Re - install the software for the printer C6280 all in one... get a "file not found" error message

  you need to reinstall the software for the printer c6280 all-in-one. Downloaded the last installation on HP web site package. During the installation process I get an error message... Unable to find user/appdata/local/temp/7z256315/setup/...setup/blocksysuser...

  the 7z256315 folder does not exist on the hard disk.

  I also have a message that it cannot find PS_A10_02_software.msi.

  Windows 7, C6280 printer all-in-one. Printer is connected to the router. The desktop computer is connected via an ethernet cable, the laptop/ipad/iphone/internet radio are connected via the wireless to the router.

  I hope you can help

  Thank you

  Charlie

  Hi cberistain,

  Follow the steps below and let me know what happens?

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-77039-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 3645097 & sw_lang=.

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print and scan?

• OfficeJet Pro 8000 double-sided printing will not respond to the control software #2

  Win XP Pro SP3

  OfficeJet Pro 8000 Wireless

  Does anyone know why Officejet Pro 8000 had control of double-sided printing, removed from the spec software?

  Does anyone know if there is a printer of this type which will respond to such control?

  UPDATE!

  ----------

  This printer is now works very well with total control on duplex printing. But how did this happen...?

  Two things have changed - well, maybe three.

  But first of all to mention another very annoying problem: wireless printer to my network connection always collapsed which was a double nuisance (23/06/2016 see also installing the driver wireless Officejet 8000 Pro says default gateway is 0.0.0.0)

  The road to happiness... I've finally updated my PC to a laptop HP Win7 (there is a problem with the laptop, but that's another story...)

  During the process of setting up laptop, I had to set up the network and add the printer. In between aid was a FAQ something like "the wirless connection drops regularly." What interested me.

  The fix was so simple - mychosen IP address has always been in the DNS range which was probably not very smart, but I didn't know any different. No one had ever mentioned before.

  The idea is to select an address in the static range IE outside the DNS. So I took a number x.x.x.249 and bingo!, a solid and reliable connection that is always there.

  Given the new laptop for download the drivers again. What went well and of course, the new machine is much faster.

  Anyway after a few tries, much to my delight I discovered that two-sided printing worked with auto rotation if I check the box. Printing a document like that I would see in portrate (horizontal spine) and read down the two pages, turn to the next page and the same thing at the end of the document. Or, if you use the rotation of non - normal mode - the printing orientation is 'normal '.

  It's a shame that it was necessary to buy a new laptop with a new o/s just to discover the problem by chance...

• Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

  So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

  Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.

• I am suddenly unable to burn playlists to CD on my MacBook Air. Error message says "Disc burner or software not found" iTunes software is up to date: the current version is 12.4.1

  I am suddenly unable to burn playlists to CD on my MacBook Air. I burned a CD only 2 days ago.

  Error message says "Disc burner or software not found" iTunes software is up to date: the current version is 12.4.1

  Hi BVBigelow,

  I understand that you are not able to burn playlists in iTunes on your MacBook Air. Fortunately, we have an article (link below) which details a number of steps that can help to restore your ability to burn CDs of troubleshooting.

  12 iTunes for Mac: If you have trouble burning a disc

  Take care!

• DYMO cardscan62, do not have the cd, need the serial number to install the software.

  I have a cardscan62 dymo, not the CD, need the serial number to install the software.

  Hello

  Contact technical support for Dymo

  http://global.DYMO.com/enHK/HOWTO/CardScan_62.html

• I installed the software recommended by Microsoft and my printer is not working as it says lxdncoms.exe and lxdrwbgw.exe of the printer driver have been blocked. What should I do?

  I installed the software recommended by Microsoft Security Essentials; When I tried to print instructions, I couldn't and the convenience store wrote lxdncoms.exe and lxdnwbgw.exe of the printer driver have been blocked.  How to unlock.  Computer is a Dell and printer is a Lexmark.

  Monday, October 15, 2012 05:17:39 + 0000, joyferg wrote:

  The game, October 11, 2012 20:43:14 + 0000, joyferg wrote:

  I installed the software recommended by Microsoft Security Essentials; When I tried to print instructions, I couldn't and the convenience store wrote lxdncoms.exe and lxdnwbgw.exe of the printer driver have been blocked.  How to unlock.  Computer is a Dell and printer is a Lexmark.

  What exactly is the software that you have installed?

  Ken Blake, Microsoft MVP

  The software is called RegWork.  I had to pay for it.  It is not yet enabled.  It seems to be just a type of utility to clean my system scan.  Since it was recommended by Microsoft Security Essentials, I thought it was the right thing to do.
  Should I continue to carry out this activation or should I unstall it.

  What makes you think that Microsoft Security Essentials recommended
  It? That cannot be good.

  You must uninstall it. Registry cleaning programs are all snake
  oil. The registry cleaning is not necessary and dangerous. Leave the
  Only registry and do not use any registry cleaner. Despite what a lot
  people think, and try to which suppliers of software record cleaning
  convince you to have used really doesn't hurt registry entries
  you.

  The risk of a serious problem caused by a registry cleaner by mistake
  delete an entry you need is much greater than any potential benefit
  It can have.

  Read http://www.edbott.com/weblog/archives/000643.html
  and http://aumha.net/viewtopic.php?t=28099
  and also
  http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspx

  Let me stress that neither me nor anyone else who warns the
  use of registry cleaners never said that they always cause
  problems. If they have always caused problems, they would disappear from
  the market almost immediately. Many people have used a registry
  cleaner and never had a problem with it.

  The problem with a registry cleaner is that it carries with it
  the risk of a significant problem. And since there is no
  benefits of using a registry cleaner, running that risk is a very bad
  good deal.
  Ken Blake, Microsoft MVP

• Found that this problem was due to windows being disabled "Wireless Zero Configuration" service. Found this automatic setting and then by installing the software corrected the problem.

  How to get through this process of changing windows 'Wireless Zero Configuration' service is disabled.  Found this automatic setting and then by installing the software corrected the problem.

  Hi Joseph,.

  1 are you always face the question or the issue are already fixed?

  2 Windows operating system you are using?

  If you still experience the problem, you can follow this link completely and check if the problem persists.

  In the Windows wireless network connection problems

  You can also read the following article and check.

  How can I disable wireless configuration and enable Windows XP Wireless Auto Configuration services

• I am trying to install the service Pack 2 or 3... they are all two generate error message: EXPECTED VERSION OF THE PRODUCT NOT FOUND... Help, please. Thank you.

  I am trying to install the service Pack 2 or 3... they are all two generate error message: EXPECTED VERSION OF THE PRODUCT NOT FOUND... Help, please. Thank you.

  George in San Diego

  Assuming that Windows XP has been reinstalled just for some reason any...

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• can not install the software for all in one photosmart 2610xi of disc of windows 7 pc

  I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc.  Goes so far then stops and says cannot use the command "run as".  I am the administrator and logged as such.  I would like to use the software provided with to send faxes and others.  I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software.  Any suggestions?

  Thank you

  Hello

  The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
  No matter which compatible OS are registered on the CD...

  A newer version of the software for Windows 7 can be downloaded from the HP site.

  Before installing the software, be sure to follow the steps below:

  1. Enter the control panel > devices and printers.
  2. Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
  3. Disconnect the USB cable between the printer and restart your PC.
  4. Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=

  Kind regards

  Shlomi

• Error - Lifecam3.60.exe is not a valid Win32 application. Failed to install the software for Microsoft VX5000 webcam.

  Original title: impossible to install the software for vx5000 webcam.

  I tried to download with Firefox; the first time it shut down my computer, the second time, he showed, it was the download of files, but after an hour more, I let down, then switch to IE.

  I tried to install Microsoft vx5000 webcam software in win xp.  has no charge. I then downloaded last update 3.6 Lifecam and I get the message "Lifecam3.60.exe is not a valid Win32 application.   What to do next?

  Hi golferfrankholeinone,

  You can follow this link and check if it helps.

  Troubleshooting, install the Intellipoint or IntelliType software, LifeCam.

  Hope the helps of information.

  Please post back and we do know.

• I am installing service pack 2 for windows vista home edition I get the error not found 0 x 80070490

  I try to install service pack 2 for windows home edition vista, I get the error not found 0 x 80070490 msicexec has an option to make extended logging, but spinstall/help shows all options.

  Split of: http://answers.microsoft.com/thread/82972695-1d12-4a07-9d72-0f9928a68dc1

  Hello

  Apologize for the delay in response. Please see the following article to resolve the issue of Service pack 2 installation:

  Error code 0 x 80070490 when you use Windows Update or Microsoft Update to install updates

  Note: Make sure you back up your data before you perform a repair of Windows installation.

  Hope this information helps. Back to us for assistance.

• Impossible to install the software to receive error message like "16-bit MS-DOS subsystem config.nt msiexec.exe file system not suitable for running MS-DOS and Microsoft Applications."

  Hello

  Original title: problem installing the software
   
  When my wife tries to install software (for example the updates of Windows or Itunes) on his Dell laptop (Windows Vista Home Premium), she gets this error developed box.
  "the 16-bit MS-DOS subsystem
  The msiexec.exe config.nt file this system is not suitable for running MS-DOS and Microsoft Applications. »
  Grateful for any ideas on how to fix this problem!

  Hello

  1. what 16-bit or software program you try to run? Should I use the CD Rom drive?

  2 - is the question also appear during the installation of Windows updates?

  3. have you made changes on the computer before this problem?

  Follow the methods and check them out below:

  Method 1: Perform a clean boot and check.

   

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Method 2:

  Run an analysis of auditor of system files on your computer and check for the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Hope the above information is helpful.

• Can not install the software as another installation is already install

  When I try to install new software, my computer says that it is already install something, but I'm not.  How can I find what the computer is installed so that I can cancel it and install the software, I need?

  Hello

  1. what software are you trying to install?

  I would say you can do clean start and then install the software.

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  I suggest you follow the steps indicated by twinklingsky as dated April 20, 2010 from the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/another-installation-is-already-in-progress-error/3e84cba0-a4cb-4307-9a67-b506ebb105b3