Pavilion 110-414: best way to install a photosmart 5180 on new 8.1

Similar Questions

• After the installation of Windows 7 repair I 219 updates. Best way to install? Small batches... oldest first? Others?

  After the installation of Windows 7 repair I 219 updates. Best way to install? Small batches... oldest first? Others?

  In the previous 18 months there have been many updates toxic that caused problems... these fixes are well eliminated or fixed retroactively or this process will be as walk minefield?

  I currently intend to install some office and .net updates separately and to wait on the optional updates updates security priority are installed.

  Thanks for any idea.

  Properly installed all updates of security except IE11 upgrade [has a full update of IE8 that should cover most security problems... [Since I use Firefox... or whatever it is, but it is to say... no biggie].

  I installed the updates [ie8, etc] 1 security and updates in batches of 20-30 for most recent first then older then. Then I installed the office updates and then a point net 3.51.research showed several versions of dot net needed.

  After each batch, I did a restore pt.

  Note: this repair facility corrected a connection problem that prevented programs and 32-bit browsers... including malwarebytes to connect to the net. I had followed the many expert suggestions to fix this problem without success before the repair facility.

• What is the best way to migrate PSE6 catalogue (Wxp) to new computer W7, PSE11?

  What is the best way to migrate PSE6 catalogue (Wxp) to new computer W7, PSE11?  Recovery of previous PSE6 (Wxp) after a HD failure gave rise to images showing, but not not opening due to connection problems.  Had to restore backup images and rebuild the catalog and albums.  Found a fix to third later that has no support spent PSE8.  Try to make this migration to painless PSE11.

  William47 wrote:

  What is the best way to migrate PSE6 catalogue (Wxp) to new computer W7, PSE11?  Recovery of previous PSE6 (Wxp) after a HD failure gave rise to images showing, but not not opening due to connection problems.  Had to restore backup images and rebuild the catalog and albums.  Found a fix to third later that has no support spent PSE8.  Try to make this migration to painless PSE11.

  This is a very common and classic situation:

  http://helpx.Adobe.com/Photoshop-elements/KB/backup-restore-move-catalog-Photoshop.html

  Just make sure that your backup on the external drive is ok: you should find a "backup.tly" file in the folder.

  Use the organizer of PSE11 to restore the backup of the PSE7: the first step restores all your multimedia files, the second automatically performs a conversion of catalogue in format PSE11.

  Read the note in the link above on the restoration of XP to the ulterior Win operating system. You can also restore to a location 'custom '. For example in a "C:\My new library" folder. Make sure the main folder is accessible to all users, and if you wish, you can move the catalog (database), itself from this location to the default location: Catalog Manager, ability to move catalogs in location that is accessible to all users.

• NB550D - best way to install Win 7 64-bit and 64-bit drivers

  Hello

  I improved my NB550D to Windows7 Home Premium and installed 4 GB of RAM.
  This works much better, but want to go further and make a Windows7 Ultimate _64bit_ _clean install_ in order to take full advantage of theupgrade in RAM.

  My question is: what should I do about the Toshiba drivers for 64-bit? I guess I'm going to need some?

  What is the best way to go about the upgrade - any help will be appreciated! : D

  If you need to switch to Win 7 64 bit, then you need some Win 7 64 bit drivers.
  On the European driver Toshiba page, I could find some 64-bit drivers, but it seems that not all Toshiba for Win 7 64-bit tools are released.

  Drivers for WLan or BT stack can be found here:
  http://APS2.toshiba-tro.de/WLAN/
  http://APS2.toshiba-tro.de/Bluetooth/

  Other drivers or Toshiba tools such as value added package or Face Recognition, Eco utility and others could be used with other series of portable for example by Satellite C660D or others such as L750D, L755D or C670D
  Surely you must pay attention to the integrated graphics chip, the LAN or the chipset
  Use the drivers that are released for fleas in NB550D

• What is the best way to install XP on Vista Equium A100-338

  I want to install XP on my Equium A100-338, who has already installed Vista. What is the best way to do it, I heard a lot of bad luck stories trying to do!
  I do it only as a new software, with that I need to work only works on XP.

  Any help appreciated

  Thank you

  Hello

  In my opinion, you must install the XP operating system on the second partition.
  In this case, you can use the two BONES; Vista and XP.

  Using these two s OS has many advantages. For example, you can always test the Vista and the new Microsoft features that are available in Vista and, in addition, you can use the XP if you need to run some programs and applications that are not fully compatible with Vista.

  Then first ask how o create a second partition in Vista.
  Well, this can be done in disk management. Right-click on the my computer drive management made right click on the disk to manage and modify the size of the partition.
  Then the free space on the HARD drive can be activated, and you can create the new partition.

  Then simply boot from Win XP and install it on the second free partition.
  The Toshiba drivers needed should be downloaded from the Toshiba page.

  Good luck

• Best way to install the Suite 5.5 production on a Surface Pro 4

  I want to install my production suite 5.5 on my new Surface Pr 4, which is not a CD player. Clues as to the best way to do it. Thanks for any help.

  Hello

  You can use the following link to download CS5.5 products. Download Adobe Creative Suite 5.5 products

• What is the best way to install the new version--adobe always let things of the old version

  Hello

  I went through the installation of a new version, well... 8 times before. And I noticed that adobe has the bad habit of not properly uninstall previous versions...

  What is the best way to do it?

  Should I do an adobe install and regular confidence this time to remove completely the old version and its associated directories?

  Or should I uninstall the old version and install a new one? I was always afraid to go this route files bocause Organizer.

  Thanks for your comments.

  Because fortunately, most of the Adobe programs can coexist on the same computer, Adobe does NOT overwrite previous versions

  Now, if all uninstall completely from a previous installation, they would first use the uninstaller in Add/Remove programs. Then, a registry cleaner like CCleaner will take care of all that remains there. But wait, there is more!  For example, PrE, will NOT remove existing projects, which many people feel is a great thing. In addition, pre will not delete the preferences file, and this is why it is necessary to reset the preferences, if there are problems, even after repeated uninstalls / reinstalls. They can be removed manually. These two latter features security measures to protect users.

  Good luck

  Hunt

• What is the best way to transfer the file to a new larger internal drive?

  I am running win 7 ultimate.  I had two hard drives of 500 GB.  C is partitioned to 120 GB (not enough) I just installed a 1.5 terabyte drive.  What is the best way to transfer my data? I would keep the 500 GB (now C: and D :) and add the 1.5 to, I also have a 2 external to that I tried to move my libraries at, but I'm confused my system.)  I don't know much about indexing or mapping.

  \

  Consider transferring all the files that are currently in the second partition of 500 GB drive that is hosting the C: drive (you have referred to as D :) on the new drive.

  Once you have done this, you can then delete the D: partition since this 1 hard drive. This would then extend the C: drive to actually use all the 500 GB drive. Finally change the drive letter for the 1.5 terabyte disk d: it in disk management ( Diskmgmt.mscRun)

  So in the end you have a 500 GB C drive and a 1.5 TB drive D.

  When it comes to move libraries Windows has a utility to do it for you. If you click on your username at the top right of the menu start all your user profile directories are displayed. If you right-click on each one and select Properties, those that support this feature will have a tab 'location '. In this tab, it displays the current location of the file, but has a button "move". You move the folder and all its files and subfolders in a new location and update the references, the system uses for this folder.

  So if you created a folder on the D drive say 'Juli-year' and you right-click on Favorites, some properties, then on location you can move this summary folder in C:\Users\username\Favourites to D:\Juli-An\Favourites. Not all folders in the user profile supports this but all the c library files and a few others.

  Of course if you did as I suggested and ended with a 500 GB C drive you may need.

• Best way to move a virtual machine to new hardware

  I have a SBS 2011 VMS under ESXi 5.  The material is not enough and performance are slowed down.  I want to spend the SBS 2011 VMS to new hardware.  After install ESXi on the new hardware, which is the best way to move the virtual machine.  It's big enough, and it is a production server - I'm looking for fast and efficient.  What are the most common problems when moving from a virtual computer to new hardware?  Thank you!

  A virtual machine is encapsulated in a set of files, making it easy to carry; You can copy the files from the virtual machine using WinSCP or any other program to the destination host. Register the vmx on the new host and turn on the virtual machine. You may also look @ of Veeam FastSCP for this purpose. I have not had the chance to use it yet, but it's free and seems very popular with the community:

  http://www.Veeam.com/VMware-ESXi-FastSCP.html

• What is the best way to transfer files from old to new computer

  I think of buying a new Imac to replace my 27 Imac K 27 5 two years old.

  What would be the best way to move my files such as e-mail, documents, music, photos, etc., with doing a complete Imac Imac transfer?

  I would like to start fresh with the OS and then reinstall all my program files, but some files to transfer.

  Any suggestion would be appreciated.

  Click on the following 2 links:

  https://support.Apple.com/en-us/HT204350 move your data to a new Mac

  A new Mac set up an ancient, its backups or PC

  

• best way to specify a folder for a new virtual machine

  Hello

  I am currently working on a system that has the following file structure:

  DC1

  Prod

  Linux

  Windows

  Other

  Dev

  Linux

  Windows

  Other

  Beta

  Linux

  Windows

  Other

  What is the best way to specify a specific folder for a new virtual machine. At the Moment so I just say Linux it is said that there are several files with the same name. I discovered a way to get the good record, but it's very nearby. Any comments would be much appreciated.

  Kobus

  Perhaps the function in my folder through post might help?

• What is the best way to install windows 7 on 3 computers at home, all Macs with no previous version installed?

  I intend to divide my drive hard while I have both a mac and pc side to get the best of both worlds, but I'm not sure what product would be best suited. As I said previously is for 3 computers that don't have currently no version of windows on them, so I guess the family upgrade would be of no use and I'm not sure whether a House package might be installed on all 3?

  The most cost-effective option in your case is to buy copies of Windows 7 Home Premium System Builder. You will always have to spend money, but against the full package of Windows 7 Home Premium retail, its more profitable:

  Price OEM new eggs:
  Windows 7 Home Premium 32-bit: http://www.newegg.com/Product/Product.aspx?Item=N82E16832116752
  Windows 7 Home Premium 64-bit: http://www.newegg.com/Product/Product.aspx?Item=N82E16832116754

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not switch directly from a former Windows Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com operating system

• What is the best way to install photoshop on multiple devices?

  I am considering the classes of photoshop running for a small group of 10 people say, a month. Is it possible to install photoshop on ten machines for a single month, or what would be the best course of action in this scenario?

  You can call Adobe. They have only $10 a month for teaches and students face.  Maybe they have special offers for schools which do not have classes throughout the year.

• The best way to install Windows 7, so I can run on my MBP el Capitan end 2011 calyx Point Software?

  How to install Windows 7 so I can run on my MBP el Capitan end 2011 calyx Point Software?

  Please start the Windows installation using Boot Camp - Apple Support .

  The following links should also be useful.

  Install Windows 7 and earlier Apple Support on your Mac using Boot Camp -

  https://help.Apple.com/Bootcamp/Assistant/6.0/

• Best way to install?

  Asked me to look at an Airport Express which I have no experience on.

  It is connected to a router ADSL from Sky and they want to use the Airport Express to extend their wireless.

  I guess you make an ethernet to the router at the most convenient airport in the WAN socket and then I have it configured to extend the wireless putting the same credentials in the utility.  Then, I get a flashing yellow.  If I have set up as an access point, it works.

  It can even act as Repeater?  Help on that would be great.

  See you soon

  Set up the AirPort Express as a point of access that uses the exact same wireless network name and password than "mainline". Then, everything behaves as a network of "big".

  Indeed, you have two access points both providing the same signal and devices will be connect AP with the signal stronger.

  By "Repeater", if you ask if the AirPort Express Terminal can connect using the wireless and "repetition" or "extend" the network in this way, the answer would be Yes and no.

  Yes, if the AirPort Express Terminal will extend the signal of another Apple wireless router.

  No, if they want the AirPort Express to extend the signal from a third-party wireless router.