Photosmart B110 on wireless network. Queue Mac returns to 'break '.

Similar Questions

• LaserJet P1102W: [RESOLVED] LaserJet P1102W does not connect to a wireless network on Mac

  UPDATE: the below solution worked on my MacBook, both running El Capitan. Ignore the instructions provided in the manual of the P1102W and follow the steps below.

  I have a P1102W printer.

  Recently my LaserJet P1102W refuses to connect to networks using WPA Wireless.

  As it does not have an IP address, I can't access the web server.

  She also does not connect to my Mac Wireless via Bonjour. The printer will install when connected via USB.

  I installed printer HP Apple drivers, that contains the P1100 driver.

  The P1102W worked before wireless. I only noticed this anomaly since installation El Capitan and moving the printer to another room with my workstation.

  I need the printer to use the wireless network, as I did not have enough space on my desk for him. And I just can't place it anywhere within the range of a USB cable.

  Are there alternatives to this?

  Hi @rcosgrove,

  Welcome to the Forums of HP Support!

  I see that you encounter some problems connecting your Laserjet P1102w printer to your network wireless using your Mac computer. I can help you with that.

  First of all, I would like to mention that it would be easier to the printer connected to your network using a Windows PC. If you can't borrow or use a Windows PC, the following steps should allow you to connect the printer. If you can borrow a PC, please let me know what version of Windows and I can provide a link to the drivers to configure the printer automatically.

  Preparation of the printer

  1. Turn the printer off.
  2. While the printer is turned off, hold down the two buttons on top of the printer.
  3. Hold the buttons on top of the printer and the printer.
  4. Hold down the maintained for even 10 seconds.

  Wireless printer setting

  1. Make sure that the printer is connected to your Mac via the USB cable.
  2. Click on your Apple icon, system preferences and printers and Scanners.
  3. Click the icon of your printer on the left.
  4. Click Open print queue, printer installation, utility of printer, open printer and HTML Config utility.
  5. (If the above step generates an error, change your default browser on Safari. Please let me know if you need assistance with that).
  6. In this new window, click on the networking and wireless tab on the left.
  7. Under Mode of Communication, select Infrastructure.
  8. Select your network from the list and then click on the button with the arrows.
  9. Under Security Mode, select WPA/WPA 2. If you have an old router, you may need to select WEP instead.
  10. Enter your password wireless in the field below.
  11. Click on apply.

  Now, wait a few minutes. Your printer must change to have a solid blue light. If it is not the case, either the password has been entered incorrectly or there is a setting on the router that the printer is having a resolution of the issue. Please let me know if this is the case.

  Once you have a solid blue light:

  1. Unplug the USB cable.
  2. Return to the printers and Scanners.
  3. Hold down the CTRL key and click the icon of the printer on the left.
  4. Click on reset printing system.
  5. Click on the button "+" in the lower left corner.
  6. In this window, select your printer in the list.
  7. Click in the box next to and select your printer from the list.
  8. Click on Add.

  Please let me know if you are able of print or the results after following the above. If you can print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope this information is useful. Please reply to this message with the results. Good luck!

• HP Photosmart C309a - but wireless network can not connect

  I have a new printer C309a, but it does not connect to my wireless network.  I have read all the posts and tried everything I can think of (I'm not expert network but reasonably competent), but nothing helped.

  I use a router NetGear DG834N which works very well provide a wireless network for an iMac, 2 iPhone and an iPad. There is also a PC running that Vista wired to the router.

  When I try to connect the printer to the wireless network, it finds the network OK but when I put the password it fails to connect.  Test report says wireless MAC address filtering can be enabled.  But... MAC filtering is disabled on the router.  Wireless isolation is disabled on the router.

  Tried to get this happening for a few weeks now.  I want to emphasize that I managed to print a test page the first time it has been installed (so there was a wireless connection then).  And I got a wireless connection briefly a few days.

  Quite perplexed and not a little frustrated.  Can anyone help please?

  I think it's a question of wireless mode.  Try the other settings from the drop-down menu where it says 270 Mbit/s.

• Photosmart B110 usb - wireless connection.

  Hello

  I use a laptop HP tries to print with HP Photosmart B110 which is a wireless printer, however my wireless of the University is not strong enough to make it work in my room, so I bought a usb connector which does not connect to my computer, it makes a noise when I plug it, but whenever I try to print anything it says the printer is offline, even if it is connected! Unfortunately I'm rubbish with technology and so it's not very good, if someone could help me then it would be amazing.

  Thank you, Lauren.

  Glad to hear it! You can mark my post as a solution accepted while others can find this information if they have the same problem?

• Photosmart C309a: Want to be able to scan w / Photosmart C309a on wireless network

  I want to add the solution Center HP to be able to scan documents to my wireless laptop.  I've loaded and installed the last HP software for the printer HP Photosmart C309a on my new computer laptop of Toshiba.  I was able to print from Word and Adobe Reader, etc., wireless, but I can't access the printer through the HP Solution Center to scan documents. I am told that installation of the device is not complete.  Then...

  ... When I try via "add a device Photosmart...". "the software detects the printer, but every time I try using (connected with cable) ethernet or wireless, after the network diagnostics, it will fail.  I did at least a dozen times.

  Another laptop with the same software is close is connected via the wireless and works perfectly.  I'm working on that won't work.

  I would try to uninstall, reboot, then reinstall the printer software.  There should be an uninstall icon in the folder/printer HP in the group '' programs. ''

  If you have other software installed HP printer that you don't use I would uninstall that as well.

• HP Photosmart B110 does not work with Mac

  
  

  SOLVED

  Looks like he did not like the my Mac with a static IP address and when I put it on automatic, it worked!

• Photosmart C310 with wireless connection with MAC does not print

  Status, connections, power in ink, etc. everything is OK.  State indicates point printed but paper or envelopes come out blank.

  Remove all the cartridges, remove and reinsert the printhead Assembly.

  Turn the printer off and then back on, and then insert the cartridge when the printer prompts to insert and check to see if that can help you.

• Photosmart B110 (CB4F28)-l' printer does not

  I have a Photosmart B110 series wireless printer, which has suddenly refused to print. I have a PC with windows 8 and good drive installed. HP printer control shows the printer as offline, but when I run the Test report wireless and HP Network Configuration - everything seems fine.

  All print jobs are displayed as of mistakes and being held in a queue.

  I don't know what the problem is - can you help me.

  Thank you very much

  Thank you very much for this - that I had lived this routine (a few times) without success, unfortunately. I think it was a problem of Windows 8 that all my PSA had gone offline, even if the computer and diagnosis reports showed as being online.
  I now managed to get all the elements, including the printer by fiddling with the setup - file but don't know how!
  Anyway thanks a lot for your answer

• OfficeJet 4620 3-in-1 printer will not print on the wireless network

  Have updated my Mac OSX to Yosemite (10.10), & now the 4620 Officejet will not see my WiFi network.  Have already uninstalled & reinstalled, used USB and installation CD.  Restarted the router also.  The printer went as far "Retore System Defaults".  Any suggestions?

  THX

  Hi @tomiet,

  Welcome to the HP Forums!

  I see that your HP Officejet 4620 will print on your wireless network, using Mac OS X 10.10. I'm sorry to hear that, but I'm happy to help you!

  I recommend trying an installation installation of Wireless USB. Please consult this guide, convert a wireless USB connected printer. In addition, this video can help as well, Configuration of wireless USB printers.

  I hope this will solve your problem of connection and have a nice day!

• HP Photosmart C4780 connects not (wireless) on Mac or wireless network

  Sorry for the long post, but please someone help me!

  I bought my new printer a few days (actually 14th) and began to implement on my MacBook Pro with my Wi - Fi, which is routed through a Linksys router and mainly through my desktop computer (a PC with Windows XP). I used the CD that came with the printer to set it up on my Mac and it has set up the fine by USB, but when I try to set up the wireless, I get the following message:

  "Device not connected: to configure the network settings for the selected device, please connect via USB temporarily." The device can be disconnected from the USB once the network settings are transferred. »

  I reconnected and got the same message over and over again, so I decided to set up on my desktop computer instead. This does not work either and I got the same message on my desk I have on my laptop. Uninstalled on both computers, reinstalled and I STILL got the same message. At this point, I'm about to throw all the electronics in my bath tub and be done with them but on the contrary, I checked (and double checked - and triple checked) my router via my browser settings, fact that I know the SSID and the password and reconnected to the network through my laptop... Once again, the same message. I tried the network installation of push, the installation of the network PIN, I feel I have tried everything! Probably miss me something small, but eyes fresh is always an asset.

  Can someone help me? I printed a Test report of the network so that a Page Network Configuration and settings I received both... if need be, I can post the information from my router, in order to verify to implement, but after two days of trying to implement something that should have taken ten minutes (sometimes) I'm at my wits end.

  Network Test report:

  "Your HP printer cannot find your wireless router. Check our wireless router has power. Make sure that your network (SSID) HP printer name exactly matches your router (SSID) wireless network name. If they do not exactly match, run the installation of the wireless network to set up your HP printer. »

  How to change the network name of the printer to match?

  Summary of diagnosis:

  Wireless on: PASS

  Wireless work: PASS

  Find the network name (SSID): FAILURE

  Security: PASS

  The printer settings compatible with the wireless router settings: does not work

  No filtering: does not work

  Related: Does not work

  Signal strength: does not work

  Other networks detected matching your network name (SSID): does not work

  Detected wireless networks: 1

  Downlink Count: 0

  Channel: Does not work

  Although I was given my SSID (which does not match my home network - but how can I change this?) and my MAC address (I guess for the printer), so I didn't have the IP address of my printer has no way for me to get online to check all the settings! Is there another way to get this IP address?

  Summary of configuration:

  Communication mode: Infrastructure

  Authentication type: open

  Encryption: no

  ______________________________________________________________

  Network Setup page:

  General information:

  Network status: offline

  Type of connection: no

  URL to Web server integrated: http://0.0.0.0

  Firmware Version/Hostname/serial number were all given

  Admin password: not set

  802.11 wireless

  Hardware address (MAC): data

  Status: disconnected

  Port 9100

  Status: enabled

  mDNS

  Status: enabled

  Service name: Photosmart C4700 Series [6 last digits of my MAC address]

  SLP

  Status: enabled

  Microsoft Web Services

  WS discovery

  Status: enabled

  WS Print

  Status: enabled

  PC connected (s)

  Address IP/hostname: (nothing is here) Time since last access (mm: SS): (nothing is here)      

  Number of 802.11 networks discovered: 1

  (my correct information of wireless network is here, including the SSID, Mode (Infrastructure), BSSID, Channel, privacy (RSN), Auth (WPA - PSK), Encrypt (TKIP-AES), Signal and WPS (no))

  Help!

  Did you read this on your Verizon FIOS router? : http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/Connection-problems-with-Verizon-FIOS-Actiontec-routers/td-p/892967

• Cannot connect my Photosmart C4780 to my network wireless (home)

  Hello

  I searched this forum and tried to solve my problem, but none of the elaborate suggestions.

  I have a Photosmart C4780 and am under OSX10.8

  Recently, our internet provider changed our wireless router and our SSID. As a result, the printer that is connected to the original network and properly functioning has stopped working. I tried to connect the printer to the new network, but failed. He said now that the printer is connected to the hp network (something) and I can't change it for the new SSID.

  Could you please tell me what to do? I have installed the software mentioned in the HP website, plugged the USB cable into the printer to try to set it up, but it says that the printer cannot find any existing network (although I'm next to the printer and connected to the intended network wireless)

  Fact a little kind of hard-reset on the printer can be a good strategy? How can he do?

  Thanks in advance

  Pedro

  PS: The printer works correctly when printing via USB

  PS2: It is not an option to return the SSID of the router to the previous

  Hi @pedroa

  You say "I have installed the software mentioned in the HP website", but there is no software for the compatible with 10.8 c4780. Mountain V10.8 OS X Lion: installing and using the printer on a Mac with the Mountain Lion.

  As you know, this printer has not a wizard wireless version in the front panel instead us would typically connect the USB cable from the printer to the computer and run the installation wizard.

  Because you have 10.8 on Mac, and it there is no full feature software and drivers, you won't be the configuration wizard, to configure the printer. You may be wondering now, well how can I set up then?  Good question, we will restore the default network printers and the printer will have its own IP address designed for whats called an Ad-Hoc connection (wireless router). We will put the computer on the network printer and then print a report to get the printers IP address. At this point, we can access the built-in web server (EWS) and run the wireless from there. Once the printer on the network with the router, we can put the computer on the network and vuala that the printer and the computer will be on your network.

  To restore the default network settings - since you have done this before I guess you know how, but for others who can see the message, here are the steps

  1. Press the wireless button
  2. Select wireless settings
  3. Scroll and select default network.  Press Yes to recognize
  4. The radio turns off (the blue LED turns off).  You may need to press the wireless button to turn on wireless

  Put the computer on the network printer (temporary)

  1. click on the symbol of the airport on the upper left side of the screen Mac
  2. choose the network looking compared to the printer (we could say a variant of the name of your printer or HP setup) - it may take a few minutes to make it appear

  Print the wireless network test - wait a few minutes to make sure the computer have established an ad hoc connection, otherwise the report will not have an IP address

  1. Press the Scan button (it also the wireless menu button)
  2. Select wireless settings
  3. Testing wireless access, then select.

  The wireless network Test prints, search and note the IP address.

  Open a browser (Safari) and enter the IP address in the URL (address bar).

  Click on the network, on the left tab, click on wireless or 802.11.

  At this point, we are looking at fore 'start the wizard' should be on the right side.

  

  As soon as we will have to set up the printer to your network, you can put your computer on your own network.

  Now you can add the printer in system preferences and print

  Please let me know if that fixes the problem, thanks.

• HP Photosmart B110 all-in-one: wireless printing is not possible

  Hello

  I have my printer connected to my desktop via USB and other computers connect using my wireless network. Sometimes printing from one of the other computers works, sometimes it doesn't.

  If printing does not work I have check the printer and it is connected to the correct network and online. I check the IP address and all withdrew. The computer that I use to print is connected to the same network and sees the printer as being online.

  If I send a document to print, it is added to the queue, and then sits there. With the status of"impression". But nothing happens...

  Today, I tried to delete the printer and add it again. Still no luck. What is going on?

  Hi @Plantje1978,

  Welcome to the HP Forums!

  I understand that you can not print with your HP Photosmart B110, on 10 of Windows wireless. I'm happy to discuss this issue for you!

  Please, try the following steps:

  Step 1: Check if the printer is paused or offline

• Photosmart B110 suddenly stopped printing (Mac user)

  Photosmart B110 stopped printing (mac users)

  My printer, which worked very well last week suddenly stopped working. It is not configured for the wireless, but is connected by cable to my Mac (OS 10.6.8). The printer is turned on, the computer attempts to send that message printer is put on the queue. Then it disconnects. But befoee does, it does not print the last piece (5 lines), text file, then a line of gibberishg.

  I went through the page, deleted in case of problem, printer drivers according to the instructions but then realized I couldn't add them back again. The Mac can't "see" the printer with the USB cable. And there seems to be no way to add them to the "add a printer". It is empty.

  So now, I can't even all print.

  Would appreaciate any help I can get. Thank you.

  Hello

  Try to restart the Mac and printer and check any change.

  So make sure that the most recent driver is installed by clickign the icon Apple, then software update.

  If this does not help solve the problem try to reset the system as follows:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select print & fax.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now go to Applications > Hewlett-Packard > utility device, follow the HP installation wizard and try to print again.

  Please let me know if this is useful,

  Shlomi

• HP Photosmart B110: B110 does print wireless more after the passage of internet service provider

  Hello

  I have a photosmart b110 and always used printer wireless with no problems.

  I use a laptop HP G62, windows 7 Home premium and as I said, never had any problems with my printer before (and goes through all the printing test pages, is anything wrong with that).

  A week ago I changed my (internet) providers, and since there are problems:

  But on the HP Networkconfigurationpage prints, the printer gives all the correct information (networkname etc.), it does not react to print from the laptop orders more.

  Well, it does work once after the problem started and well after that I have installed on the pc (using "add new printer")

  However, the next day, after having restarted the laptop, the connection was working no more.

  So far, I called the service provider 3 times (in order to get different people) and heard 'Sorry, no idea' twice and "If you don't have internet, it must be the fault of the printer.

  Can someone please give me an idea about where to look?

  The last provider had a cable connection, this one is by telephone line, could that be a reason? And if so, why? And how can I solve this problem?

  So, I hope that someone can offer some suggestion help! :-)

  Reset the printer to the network settings.   Then...

  Replacement/change your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  However, if you have a gateway device, all devices in gateway (modem + router) are terrible for connectivity and wireless performance.   If this does not work, suggest you put this bridge in full bridge mode device and install your own router of high quality that YOU have full control over.

• cannot configure photosmart c4580 to connect to my wireless network

  I tried to connect my photosmart c4580 following your instructions and got to the last step and after I hit APPLY, the grip of the page for a while then it says "the server where the page does not.  I hit refresh several times but no luck.  I'm stuck.  Any suggesstions?

  Hi @BossLady2,

  Welcome to the Forums of HP Support! I see that you have problems affecting the printer through the network wireless on the Mac. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos.