install vCSA single host and manage this host of "inside".

Similar Questions

• Try to install the patch KB943729 and get this error. __

  Try to install the patch KB943729 and get this error.

  The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch.

  Any help with this error.

  I've always found the icon on my Start button that indicates that an update is ready to be loaded and I have to restart my computer

  Open Internet Explore (only) to http://support.microsoft.com/kb/971058 & re-run the difficulty in AGGRESSIVE mode. [1]

  Reboot once more & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I want to install engine review boson and for this I need to dotnrt my C drive

  There is dotnetfx (1.1) and dotnfxsp1. now I want to install this framework and it gives me an error. then I gotto Koe tht I need swithv on the function of ctrl Panel

  How I would go to this topic, the 1. only install and 3.5 which is supposed to be installled pre does not. I swithched on Panel ctrl function but it does not install it.

  Hello

  I suggest you to install the program in compatibility mode.

  Follow these steps to install the drivers in compatibility mode:

  a. Locate the executable file (.exe file) for the driver installation program.

  b. right click on the file and then click Properties.

  c. in the PackageName Properties dialog box, click the Compatibility tab.

  d. Click to select run this program in compatibility mode for check box, click Windows Vista in run this program in compatibility mode for the list, and then click OK.

  e. double-click the executable file to start the Setup program.

  For more information, visit the following link:

  What is program compatibility?

  Make older programs in this version of Windows

  I hope this helps.

• Spring cleaning: re - install everything I need and nothing else

  Hello

  I wonder if anyone can advise me on the order of installation of Creative Suite applications? I currently have all CS4, CS5, all Creative Suite CS5.5 installed applications. It is crowded, and I don't like. And I would like to have CS3 to return, but know that I can't do it in the wrong order.

  I think a big renewal my Mac by doing a clean reinstall of Snow Leopard, then install the following applications in the following order:

  1 inDesign CS3 (but not the rest of the applications in the Suite)

  2 inDesign CS4 (but not the rest of the applications in the Suite)

  3. all applications in Creative Suite CS5.5.

  This sounds like a bad idea? I never use previous versions of Illustrator, Dreamweaver, Photoshop etc but I need different versions of InDesign in order to deal with various clients, register down, etc...

  Any advice would be appreciated - Jeremy

  This seems doable. If you have the Creative Suite, you can install a single application and not the others. Install in the order you listed.

• vCenter Server and Manager on the same virtual machine and on the same host ESXi update that they manage

  Hi all

  I have a question to which I did not respond.

  I have an ESXi 5 on Proliant DL380 G7 server host. I want to install vCenter Server and Manager Update on one of the Server 2008 R2 VM on the same host. I know it's possible, but my question is how Update manager will provide updates to the same ESXi host it will run on? The update is applied every time host must spend in maintenance mode and power off the virtual computer running on this subject which means he'll kill VM where vCenter Server and Update Manager is running and the update will fail right?

  Is that possible at all or the VCS and UM such as a virtual computer operating point is updated to other guests if you have them or vMotion as VM to another host when you want to update the VCS and UM host is running?

  Thanks in advance.

  It will not work.  You will need at least two hosts.  This way you can vMotion the vCenter VM to another host.  From there, you can use VUM.  Otherwise, you will need to patch the host as a stand-alone host.

  See below for patching a standalone host

  http://communities.VMware.com/people/vmroyale/blog/2011/09/15/updating-ESXi-5--single-use-esxcli-how-to

• Field unique unique host 1 Admin and managed 2 weblogic cluster

  Hello

  I am configuring the Manager node for automation of graceful start and stop of admin and the managed server.

  weblogic cluster configured on a single host machine. Configure an admin and 2 managed server. It contains an area of application.

  Admin urt is http://hostname:9001 / Agile

  Management 1 http://hostname:7001 / Agile

  Run 2 http://hostname:8001 / Agile

  Manager node that is configured outside of the folder of weblogic

  Created nodemanager properties file and file field path to the node of file field.

  In addition, added startup script, set the script to start true and assigned to the strartup for the admin server script.

  Path of the application domain registered with all the admin domain Manager node

  In the Console, have set up one machine and mapped all three server on the machine.

  active crashrecovery true

  Later I started the management nodes. He has not started the administration server.

  began to admin server manually,

  A mapped admin nodemanader in Server Manager class path, so that I can start the managed server.

  My JMX managed server setting is

  DCOM. Sun.Management.jmxremote - Dcom.sun.management.jmxremote.port = 9896 - Dcom.sun.management.jmxremote.authenticate = false - Dcom.sun.management.jmxremote.ssl = false

  My JMX managed service setting is

  -Dcom.sun.management.jmxremote - Dcom.sun.management.jmxremote.port = 9899 - Dcom.sun.management.jmxremote.authenticate = false - Dcom.sun.management.jmxremote.ssl = false

  I am getting below error

  *********************************************************************************************************************************************************************************

  CLASSPATH=/ag3/app/Oracle/Middleware/patch_wls1211/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/ag3/app/Oracle/Middleware/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/ag3/app/jdk1.7.0_55/lib/tools.jar:/ag3/app/Oracle/Middleware/wlserver_12.1/server/lib/weblogic_sp.jar:/ag3/app/Oracle/Middleware/wlserver_12.1/server/lib/weblogic.jar:/ag3/app/Oracle/Middleware/modules/features/weblogic.server.modules_12.1.1.0.jar:/ag3/app/Oracle/Middleware/wlserver_12.1/server/lib/webservices.jar:/ag3/app/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/ag3/ app/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/ag3/app/Oracle/Middleware/patch_wls1211/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/ag3/app/Oracle/Middleware/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/ag3/app/jdk1.7.0_55/lib/tools.jar:/ag3/app/Oracle/Middleware/wlserver_12.1/server/lib/weblogic_sp.jar:/ag3/app/Oracle/Middleware/wlserver_12.1/server/lib/weblogic.jar:/ag3/app/Oracle/Middleware/modules/features/weblogic.server.modules_12.1.1.0.jar:/ag3/app/Oracle/Middleware/wlserver_12.1/server/lib/webservices.jar:/ag3/app/ Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/ag3/app/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/ag3/app/Oracle/Middleware

  PATH=/ag3/app/Oracle/Middleware/wlserver_12.1/server/bin:/ag3/app/Oracle/Middleware/modules/org.apache.ant_1.7.1/bin:/ag3/app/jdk1.7.0_55/jre/bin:/ag3/app/jdk1.7.0_55/bin:/ag3/app/Oracle/Middleware/wlserver_12.1/server/bin:/ag3/app/Oracle/Middleware/modules/org.apache.ant_1.7.1/bin:/ag3/app/jdk1.7.0_55/jre/bin:/ag3/app/jdk1.7.0_55/bin:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/ag3/app/jdk1.7.0_55/bin/

  Your environment has been defined.

  Error: Exception thrown by the agent: java.rmi.server.ExportException: Port already used: 9899; nested exception is:

  exception java.net.BindException: address already in use

  < 16 October 2015 01:38:12 > < FINEST > < NodeManager > < waiting for the process to die: 22611 >

  < 16 October 2015 01:38:12 > < INFO > < NodeManager > < server failed during startup, so won't be restarted >

  < 16 October 2015 01:38:12 > < FINEST > < NodeManager > < returned runMonitor, finished setting = true and notification servers >

  *********************************************************************************************************************************************************************************

  
  

  Is it possible that I can start my server managed by Admin? If Yes, what are the steps I have to do to make it viable.

  In addition, which is just how to configure the node Manager autostart administrator and Manager on the same host and server with the single domain.

  NodeManager cannot start Admin and the managed server automatically when you gracefully stop the managed server.

  Recovery setting enabled the crash work in case of a sudden collapse of the host itself. This does not mean that NodeManager servers will automatically start every time. Crash Recovery also works for servers that are started by using Nodemanager only.

  For:

  Error: Exception thrown by the agent: java.rmi.server.ExportException: Port already used: 9899; nested exception is:

  exception java.net.BindException: address already in use

  As says error itself port is already in use. Be sure to use the single port and also check if a process taking into this port.

  See you soon,.

  Naveen

• Tried to install software fibotrader and it says "install Windows Script Host 5.6'."

  original title: TRIED to INSTALL the FIBOTRADER SOFTWARE... IT SAYS INSTALL WINDOWS SCRIPT HOST 5.6... HOW SHOULD I PROCEED

  TRIED TO INSTALL THE FIBOTRADER SOFTWARE... IT SAYS INSTALL WINDOWS SCRIPT HOST 5.6... HOW SHOULD I PROCEED

  Hello

  I tried your software in vista Compatibility Center

  no reference to it

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=software&s=FIBOTRADER

  check the compatibility of vista with the manufacturer of the program

  and read this:

  If a program is compatible with vista you can try right click on the setup.exe, and then selecting run as administrator

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If a program is particularly important to you, there is this way of trying

  but it's expensive, because you must have a previous operating system license to install

  This method also works in vista Home premium, BUT isn't suppoprted by microsoft

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=04d26402-3199-48A3-afa2-2dc0b40a73b6&displaylang=en

• Access the SMB storage using esxi host and manage with MS server 2008

  Hi there, I know the subject line can be confusing, but I didn't know how to explain what I need in the line object in such a short sentence.

  in any case, I have a storage device SMB, a Promise VTrak M610P, which is attached to a blade server 1U HP through interface channels double Ultra 320 SCSI host. I can't configure the VTrak as a NFS, the only way to access logical drives is connected to a server via the scsi channels and using the operating system to share the drive and the shared disks.

  I would use a server blade with dual ultra 320 SCSI host interface channels and connect the VTrak to this server blade. Then I would install ESXI hypervisor OS 5.5 to this server blade. I want to know is if the ESXI operating system will recognize the logical drives and if I create a virtual machine with MS server 2008 and see if the virtual machine detects logical drives, so that I can share the drives? I hope that I'm supposed to and if I'm not, please let me know what makes no sense, I will do the best to explain it better.

  Thank you

  Andy

  So it turns out that there seems to be something wrong with vClient when you add a hard disk (virtual disk) to a virtual machine of size greater than 4 TB. Article VMware KB: value of range error message when you add more than 4 TB capacity discs in vSphere Client describes this if you encounter this problem, add the hard drive via vSphere CLI, CLI power or vmkfstools. So this seems to be a known issue on vClient. What I ended up doing was using vClient, creation of hard disk, adding to the virtual machine (size of the hard drive is to 5.45) and when I would get the error message on the DiskCapControl out of reach, I would just click OK and then finalize the creation of the hard drive on the virtual machine. Once the process is complete, I selected the virtual machine and noticed that he indeed added a new HDD size 5.45 TB even if he's complained about it. I pulled to the top of the virtual machine with windows server 2008 R2 installed and was able to create a new disk under windows and set it up as a shared drive on the network. Looks like vClient must be updated by VMware and correct this bug, if it's a bug that I think. Thank you for the help vervoort!

• If you install and activate your Lightroom on a single computer, and dies from this computer, is it possible that you can use the same serial number on another computer?

  If you install and activate your Lightroom on a single computer, and dies from this computer, is it possible that you can use the same serial number on another computer?

  With most of their applications, you can disable it on a single computer, and then turn on another.  I'm not 100% sure of Lightroom, however.

• All disks in a single host went from vSAN

  Hello

  I recently had a power cut at home. My 3 node cluster came back OK, but I noticed that the vSAN was missing lots of storage.

  After investigation, it seems that all the disks in a single host have been abandoned (all 4 were operating before the incident).

  I tried to reboot the host, but this has not solved the problems I encounter.

  My file server is unable to turn on because of that, I think it was resynchronize components during the power failure happened.

  Because I have data on these discs (my file server), I hesitate to re - install ESXi on the host or do something with the disks

  I am due to upgrade my version of 3 disc format, but that he was reluctant to do this either at the present time because of my data!

  Environment:

  - vCenter Server Appliance 6.0 U2 (build 3634794)

  -ESXi 6.0 Update 2 (build 3620759) on all hosts

  Please can someone advise on the measures I should then carry out?

  See below for information and some screenshots.

  Thank you

  Metadata health check informs me that the disks have failed, but all 4 disks functioned as expected before the power failure:

  

  Research in the "Virtual SAN health status" column, it shows no health information on disks

  

  Comparison to another host:

  

  The host CAN display the disks on it's HBA, see below:

  

  Update:

  Managed to find the size of the memory heap LSOM and the command 'secret' to increase

  For my own sanity and to keep track of what I did, here's what I did.

  You can see where I had already changed their values before the default.

  

  Edit:

  The command VMWare wanted to keep this secret is in their archives here:

  http://vmware1140.rssing.com/Chan-4263175/all_p2889.html

  I do not understand why VMware wants to keep this command of the community? Currently, I am testing now with the two heapsizes to the maximum configuration. My host is starting

  He typed at the origin:

  Dear Simon,

  I tried:

  vsish EI Setup/config/LSOM/intOpts/heapSize 2047

  to increase the heapsize memory LSOM has allocated,

  then did restart, without success on 192.168.240.55,

  He is still unable to establish the Group of disks with memory error...

  And this has changed to:

  Dear Simon,

  I tried the command you gave me in the SR to increase the

  HEAPSIZE memory LSOM allocated, then did restart.

  without success on 192.168.240.55.

  He is still unable to establish the Group of disks with memory error...

• Can you have a cluster with a single host?

  Hello

  I'll put up a new VMware infrastructure, which includes a cluster with 2 guests in a place and a single ESX host in a second location.  They will all be managed by server unique vSphere.

  It is possible that the second site can earn an additional ESX host at some point in the future.  So, my question is if I have to create a cluster for the second site and have just the single host in it for now, so its ready if we add a second host?  Is it possible to have a cluster with a host, and what are the consequences of this?

  Thank you

  Joe

  Technically, Yes, you can have a Cluster to a single node and if you plan to add another node in the cluster later it makes sense to set up the first node.

  And, both from a technical point of view, but especially from a point of view BAU.  Mulitnode cluster promotion will be less intrusuve there is no additional software to add on the pre-existing main node, therefore you Board change will be less nervous about the piece of work, because it won't change the node pre - that does not exist.

  From a personal point of view my current client runs a number of single-node clusters, in their environment.

• What is the best way to update a single host ESX 3.5?

  We run a single host ESX Infrastructure 3.5 Update 1. Virtual machines stored on local disks. All management is done by customer VI, there is no available vCenter.

  I want to update the host ESX 3.5 Update 4. What is the best way to achieve this?

  Download ISO: http://www.vmware.com/download/download.do?downloadGroup=ESX350U4 and burn it to a CD

  Stop your virtual machines

  Restart your ESX and boot from the CD

  perform an upgrade of the ESX Server

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!

• Fault tolerance is possible within a single host?

  Fault tolerance is possible within a single host?

  My requirement is to create two virtual machines within a single host and high availability between these two VMs.

  Please suggest a solution.

  You will not be able to fulfill this requirement through VMware FT, this feature requires a minimum of 2 host.  you'd have to consider third-party solutions to meet your specific needs

• We are unable to validate this serial number for adobe lightroom. I just bought the upgrade to lightroom and get this message when installing

  We are unable to validate this serial number for adobe lightroom. I just bought the upgrade to lightroom and get this message when installing

  Fortunately the Adobe customer service has been able to help me by making a change to my hosts file.

• Upgrade of a single host with Shared Storage

  Getting ready to upgrade my ESX 3.5 hosts to vSphere.  I've already upgraded to vCenter.  I have two hosts managed by vSphere, and both hosts have a storage area of channel shared fiber that guests are on.  Each server can see all shared data stores.  I want to upgrade a single host first, then later upgrade the other host.  I've migrated the guests running to 2nd host whose I am not upgraded at the moment.

  My question is can I upgrade the first host using Update Manager?  What happens to guests in data warehouses that run on 2nd hosts?  Will they be affected?

  > My question is can I upgrade the first host using Update Manager?

  Yes.

  > What will happen to customers in data stores that run on 2nd hosts? Will they be affected?

  They will not be affected.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru