install win2003 r2 on hp6000 sff

Similar Questions

• Impossible to install Win2003 Server to dualboot with Vista on Equium L350 - 10L

  Hello
  I have Windows Vista preinstalled on my Equium L350 - 10L. I wanted to install Windows 2003 server on another partition in order to dual boot between the 2 operating systems. When I start with the install of Win2003 CD and access the Setup screen, I get the following error: «Setup didn't find any hard drives installed in your computer» I'm assuming (correct me if I'm wrong) I have need to install the drivers for the SATA controller during the installation when he says "press F6 to install 3 pary SCSI or RAID drivers. I have two problems: 1. I can't find the drivers for the SATA for EQUIUM L350 - 10 L controller, 2. the laptop is not a floppy drive - which is the only way to install drivers during installation. Helpful suggestions and solutions would be greatly appreciated. Thanks in advance.

  Hello

  It is important to doesn´t if toshiba does not explicitly have the F6Floppy drivers for your machine. You can go to www.intel.com and download the drivers from F6Floppy from there.

  On the issue of the 'no-floppy", you can easily find a way just in slipstreaming with nlite for self made Win2003 Server drivers CD.

  To learn more about "slipstreaming" CD with nLite, simply type 'Nlite slipstream XP ICHM8' or some of these words in google and you will find all THE answers. Or you use the forum search and find only 10000 messages on this slipstreaming with nlite, etc...

  Welcome them

• HP USB 3.0 SuperSpeed PCIe x 1 card does not install on HP 8200 Elite SFF

  I buy the HP USB 3.0 Super speed PCIe x 1, QT587AA card.

  I have istalled the card in a HP 8200 Elite SFF, Windows 7, 64 bit. Connected to power auxiliary esata.

  After installing the drivers from the CD, I get a message from ball of Windows indicating the software device driver has not been installed successfully. When I look in Device Manager I see the yellow triangle next to the (USB) Universal Serial Bus controller under other devices, and when I go into the properties of this status is driver not installed (code 28).

  I have the latest BIOS v2.15.

  Info from map:
  P, 3.0(2x2) USB SuperSpeed PCIe x 1 card
  CPL REF: 661320-001
  SPN: 663213-001
  IAW REF: HI343-1
  CT: PCFKCOAAB1S1HL
  Rev A

  Any ideas?

  Simple answer: not compatible with the 8200 series by the HP Web page.

  See: http://h10010.www1.hp.com/wwpc/uk/en/sm/WF06c/A1-329290-332469-3965933-3965933-5153600-5153603.html

• Installing Win7 on 6005 Pro SFF - "a required cd/dvd drive device driver is missing...". »

  Get this message from the Windows 7 installer at boot on Win7 Pro 32-bit disk. Have you tried several drivers likely to search in the pages of downloads HP - expansion on another machine and copy the folder of "swsetup" on a USB key and navigation on the offending machine - with the BIOS set to AHCI, Legacy IDE, Native Mode IDE and RAID in turn, but no joy. Is there another place I can get a storage controller driver that will work? Or is there anywhere I can download the installation of custom OEM Win7 HP media which is suitable for this model of PC?

  Thank you!

  Hello:

  If you have the installation media yourself (to download the ISO of W7), which is normally due to a bad burn to DVD or you didn't get the entire file to download even though it said full.

  Check the download file size you actually, vs, which is on the download site.

  Your PC didn't need special drivers to install W7 - DVD, AHCI or otherwise.

• T61 with Win2003 drivers not available

  Hello. Due to the requirements of an application I need to install in the T61, I need to install Win2003. However, after formatting & Installationavecuneracine Win2003, I can't find a lot of pilots as it seems that Lenovo does not support the Win2003. What should I do?

  There may be cases where the Win 2000 drivers will install.   all you can do is try.   When I installed first 2003 on my T42p way in 2004, it took me two weeks to find 95% of the drivers I need.   Today, it is much easier.

  Good luck!

• M40 for Win2003Server drivers

  Hello!
  I can not find drivers for Windows Server 2003 for my Satellite M40 (PM-730/512 / 40 G 42/15WT/DS/LM/W)
  THX

  Hello

  you won't find any Win2003 Server for laptops!
  Sorry!
  I also wanted to install win2003 my Toshi and searched for pilots! But I nothing found and called Toshi netherland hotline and they told me that Toshiba does not give a full support of driver for the OS (Windows XP) liveries. All the other BONES are not tested and not supported (for the current machines, except W2k for business units)!

  Sorry!
  Theo

• FH971AA wireless card compatibility

  I have installed in my HP DC7900 SFF FH971AA wireless card that works very well.

  I think I have the same kind of card for HP DC5750 Microtour my wife.

  Is it compatible?

  Hello:

  It should work fine.

  The dc5750 also has a location PCIe x 1.

  The specifications indicate it is compatible with all the form factor of the PC, and that it also comes with a slim-line mounting bracket, you'll probably need to install.

  You first need to remove the support that adapts the format microtour and CMT PC form factor of.

  http://h10010.www1.HP.com/wwpc/us/en/SM/WF06c/A10-51210-1130359-1130363-1130359-3769770-3769771-3769773.html?DNR=1

• methodfailed. Summary

  All my conversions are omitted.

  I'm trying to convert a DELL PE1950 server to a virtual machine.
  Conversion failed online at 97%.
  Error is: METHODFAULT. SUMMARY.
  The server has installed win2003. Its an OEM version.

  
  Can you help me please it's urgent.

  Welcome to the VMware forums communities.  Your message has been moved to the converter forum - http://communities.vmware.com/community/vmtn/mgmt/converter.

• More old PowerEdge 2850 & ESXi?

  Hello

  We have a PowerEdge 2850 we brought back in June 2005, which came with Windows 2003 Standard installed. Now, we would like to make use of additional memory that the 2850 can take up to 16GB. Of course Windows 2003 Standard does not accept this, then we are looking at the formatting, and install ESX or ESXi, then we can install Win2003 on a virtual machine.

  However, after the President of Dell support, they said it maybe some hardware compatibility problems, like 2005 it was at the beginning of when Dell began to supprt virtualization and the 2850 would be the oldest machine that they Supportepar. So I need to check the documenetion Dell & ESX/ESXi to ensure compatibility.

  I was wondering if anyone here has experience with ESX/ESXi and the PowerEdge 2850, especially one since about 2005? If so, do you have questions? I've listed the material PE 2850 below, done anything out of competition as being incompatible?

  POWEREDGE 2850

  1 x CARD mounting PCI - X - 3 SLOTS PCI - X (64-BIT)

  1 x 4 GB MEMORY DDR2 SINGLE RANK (4x1Go)

  2 x XEON 3.0 GHZ/2 MB FSB800 PROCESS

  2 x Intel Pro 1000 MT NETWORK CARDS

  1 x ATI RADEON 7000 EMBEDDED

  1 x 3.5 INCH 1.44 MB of floppy DISK DRIVE

  4 x 300 GB SCSI ULTRA320 (10 000 rpm)

  1 x PERC 4DI EMBEDDED RAID OPTION (CH SINGLE)

  1 x DRIVE de DVD-ROM/CD-RW COMBO

  1 x block of power SUPPLY NON REDUNDANT

  1 x C04 MR5, edge in USING RAID 5 RAID

  Any help, advice or suggestions would be very appreciated.

  Thank you very much

  Ben

  I installed ESXi on a 2850 at present, which was since August 2005 and it works like a treat.  We cannot do any messing extra to make it work, it worked as soon as the software has been installed.

  -----

  Mark Atherton

• HP compaq dc 7900 SFF: no sound after install graphics card

  I have hp compaq dc 7900 Mini PC... After you install the graphics card ati hd 5460 there is no sound in my pc... instead of on-board "audio device high definition AMD there." I use some youtube vedios to solve this problem and there is a solution by allow edge audio in the bios Setup... then I try to enter the installation using F10 but it ask password... then I hit "enter" 3 times and I could not able to enter the bios Setup... in audio device shipped here turn off but I can not change it... I could not change any setting in the Configuration of the bios... so please help me solve this problem.

  

  

  You are the very welcome.

  There are two ways you can solve the problem.

  1. remove the rider of green password on the motherboard, following the instructions in the manual that I posted.

  And as I wrote yesterday, if remove the jumper and turn on the PC does not erase the password, then the only other thing you can do is to replace the motherboard by one with no BIOS password set.

  2. install a video card that has no hdmi on the port.  I put a Radeon HD 2400 in my dc7900 SFF.

  This card has only one S-video and DVI port, so the onboard sound is not disabled when you install a card like this.

  Then you can press the yellow button to reset CMOS to restore the integrated audio system.

• Elitedesk 800 g1 sff - cannot install windows 7 on SSD

  I have a new elitedesk g1 800 LTS.

  I would like to perform a new installation of Windows 7 Pro 64 bit on an SSD because I tried to clone but it BSOD.

  I try a new installation, its seen in the biso but when I boot from the cd it stops and can not find the HD during installation and I can't find the drivers to install to go further.

  Am I missing something?

  Win7 Pro 64 bit

  elitedesk 800 g1 sff

  BX100 crucial SSD 250 GB

  Any help much appriciated.

  Talked to HP and Crucial, the drive is not supported.

  Only supported discs are...

  Drive internal

  320 GB up to 2 TB SATA (7200 RPM)

  500 GB up to 1 TB SATA (10000 RPM)

  500 GB up to 1 TB SATA SSHD

  Up to 160 GB SATA SSD 128 GB

  256 GB SATA SED

  Limitation to say crucial HP for the reader is quite rare and replacement by the MX100 and MX200 discs like those are SEDs

• 6000 pro SFF: installing the video card on 6000 Pro SFF with BIOS 2.03

  I am in train to install a video card in my 6000 Pro SFF and find that when the new video card is inserted, neither she, nor my tip on video card working.

  Assuming that their must be a way to get the card to operate in the BIOS (2 786 v2.03), I'm going to the "Advanced" tab and find "PCI devices. Underside of the mentioned deviced is 'Controller VGA Intel'. Choice for this controller are the IRQ = 5, 10, 11, or disabled. Apparently, the default value is 5 because that's how it is now set.

  A little scared that if I put "Disabled", which will be not only the new video card does not work, but the video card on the motherboard won't work, too.

  Y at - it anyone out there that can tell me if you change the VGA Intel controller to disabled is the right way to install the new card, and that I only put my computer in a heavy paperweight by.

  You are welcome.  Thank you for the additional information.

  I don't think you have to do anything in the BIOS.  At least, I wouldn't do anything, until you have improved the PSU to see what is happening.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• dc5800 SFF: HP dc5800 SFF: firmware Install with new processor Q9400

  I have a HP dc5800 SFF with a core 2 duo dual core cpu. Checking the list of caught CPU supported, I installed a cpu Q9400 supported. Started the machine and got an error in the microcode. Research and found that I needed to download the firmware file that I made this site, the file is called "sp51245.exe."

  How to install this file? The computer does not start, gives just the firmware error. Restore the old CPU to then run the firmware file so I install the Q9400?

  Sorry, that didn't work.

  The only other suggestion I can offer would be updated the BIOS with the latest version.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3658095&swItemId=vc_97162_1&swEnvOid=2103

  To update the BIOS, you take a USB flash drive, format it with the FAT32 file system.  Do not make the bootable disc.

  Copy the contents of the file flash BACK found in the BIOS update file (launch the executable and it will open a help page and you can copy the files from this page by clicking on the link there).

  With the flash drive connected in the USB of the PC port boot, press the F10 key to access the BIOS.

  On the file menu, there will be an option ROM Flash System.

  Select this option and follow the instructions on the screen to Flash the BIOS.

  If all goes well, that will remove the microcode update error.

  Just keyboard, mouse, monitor and drive connected to the computer when you Flash the BIOS.

  If that does not clear the error, unfortunately, I won't have any other suggestions for you.

  As you know the processors you tried are taken in charge in the PC and why they don't work, I have no idea.

  For your convenience, I attached the files to update the BIOS below... once again, you unzip the files and copy the contents of the file in the folder in your drive formatted FAT 32.

• dc7800 sff windows 7 32-bit clean install - a required CD/DVD device driver is missing.

  Hard to install Windows 7 32 bit on my desktop DC7800 SFF pc

  white screen - fixed (updated bios using back win98 & USB flash drive prep utility)

  installation white screen set (stopped using the dvd usb player & utilisΘ local DVD drive)

  Image DVD transferred to USB flash drive (always get this request)

  Downloaded and tried many drivers of different sites...

  Drivers, Software & Firmware for HP Compaq dc7800 Small Form Factor PC

  Intel® Rapid Storage Technology (Intel® RST) RAID driver

  Intel ICH9 Chipset Driver for Microsoft Windows 7 - sp46869.exe

  It seems that nothing I try does not work.

  (always get this request for drivers)

  It has been a very long and tedious struggle day. I'm very tired and don't know where to look next to find answers...

  Any help this dispute would be really appreciated thanks.

  Well everything is solved and works well.

  Typing this from the newly built Office.

  Any Solution used (thanks to Paul Tikkanen to put me on the right track)

  (01)

  Update BIOS to fix a blank (black) screen during windows 7 Pro (32 bit) install on a hard drive (new & empty).

  Dc7800 SFF - Windows 7 drivers

  Update of firmware for HP 786F BIOS of computers with Intel processors families
  sp51245.exe

  I couldn't get this utility bootable CD version to work so had to turn to a USB bootable flash instead.

  Prepared the botable USB using - key USB W98 back Starter Kit

  (02)

  Downloaded the ISO from Microsoft file

  Windows 7 Professional with SP1 (32-bit)

  SW_DVD5_Win_Pro_7w_SP1_32BIT_English_-2_MLF_X17-59276. ISO
  Real Corsair Flash drive size - 2 377 506 KB - in windows Explorer
  Size: 2.26 GB - 2,434,566,144 bytes
  Size on disk: 2.26 GB - 2,434,596,864 bytes

  The file ISO of Windows 7 original instalation was certainly smaller that it should have been!

  (03)

  Burn the ISO on a 4.0 GB Corsair Flash drive using USB W7 Starter Kit

  New image details - Corsair 4 GB Flash Drive
  Size: 2.28 GB - 2,452,486,680 bytes
  Size on disk: 2.28 GB - 2,454,302,720 bytes
  873 files
  200 files

  (04)

  The installation went very well with only 2 issues of device driver initially...

  PCI Simple Communication controller
  Driver - Chipset
         Customer Manager Active Intel HECI Device Driver
  sp46137.exe
  PCI serial port
  Software - system management
          Intel AMT AMT 3.0 LMS_SOL
  sp46134.exe

  (05)

  I run one - SAPPHIRE HD 5450 1 GB DDR3 PCIE HDMI - Twin (DVI & VGA) graphics card

  First configuration - downloaded the drivers from the manufacturers Web site.

  On the installation of what I thought was the at and the latest driver, 2 problems...

  1 - the installation says that I needed .net Dot 4

  Downloaded and installed - Microsoft .NET Framework 4 (stand-alone Setup program)

  2 - the second test video driver installation is finished - but - screens flickered and flashed like crazy.

  I did correct anything that.

  Wiped the hard drive and run through the steps above.

  This time, making sure to use the original cd that came with the card of 2011. Result!

  PS - In the first leg through after installing windows successfully, I did all the updates of Windows 7.

  It took hours to download and install.

  Second time, I did not bother with the Windows updates immediately.

  Next step-

  3 future issues to be covered in the following threads

  (a) preparation of the utility of the technology Intel Management Acive - entirely private or disabled.

  (Do not need or want but hate having outstanding pilot flags in Device Manager).

  (b) the image of the hard drive and train you to restore boot partitions for multiboot Windows 7 installation.

  (c) work on a quick way to landslide-live stream the latest windows updates in the installation.

  Thanks for the help and I hope that some info above is useful.

  Advice on the high road (preferably free) partition SW of imagery to manage encrypted data of the partitions would be a good thing.

  Next thread?

• HP compaq dc5800 sff: install a new graphics card

  Hello

  I bought a 240 r7 radeon graphics card to upgrade my hp dc5800 sff, it is running on the q33 chipset from intel.

  How to install this new graphics card? I want to talk about the installation of the drivers, not the placement in the pc itself.

  I read somewhere that I first need to uninstall the drivers from the chipset, q33 before putting the card in my pc, is it true? If Yes, how should I do it OK?

  If not, can I just put it in the case, plug in my monitor inside and start the pc, then install the drivers from the disk?

  Thank you

  Hello

  It is very rare that the removal of the existing video driver is necessary before installing a new video card. Most video card manufacturers do not understand such a suggestion with instructions to install a new video card.

  However, if you still believe that you must work Yes, so that you can go through the program and features Control Panel to remove the video driver only. You can also use Driversweeper to clean up the video driver.  However, before removing the Chuck, make sure you have the original drivers downloaded to your desktop so that you don't have to hunt for him later if necessary.

  The AMD R7 240 does not yet in your PC according to the level of brand, model and vBIOS in the graphics card.  In addition, check power supply required for the 240 R7 which, from what I've read is 400 watts.