Install Windows 7 problems again!

Similar Questions

• Elite 8300, re - install windows 7 problem on new drive

  Hi all

  I juist bought a number of the PC Elite 8300. I want to install an SSD of replacement instead of the player that comes with the unit.

  I can happily re - install windows, but it won't catch the key of windows since the bios and not asking the license key during the installation is complete.

  I use a windows 7 Professional dvd. I even tried restoring factory DVD but they complain that the disk is smaller than the original.

  Thank you

  Hello:

  The key in the BIOS is only good for W8.

  You need a product key of Windows 7 to install W7.

  If your PC came with the W8 Pro (which no doubt), you do not have the rights to downgrade, but you'll have to contact HP support for sorting.

  I don't know what to tell you.

  Basically, they have to provide you with a W7 product key in order to install W7 Pro.

  Recovery disks only works on the same hard disk of size (or more) like the one provided with your PC.

• Video card problems after installing Windows 7 (p6130nl - 64 bit - NVIDIA GeForce GT 220)

  
  

  I managed to solve it after a night of messing around; installing new drivers did not work whether, since the problem is that it does not load the driver until the video Bios has been updated. And install other windows operating system did not help either, or formatting the drive etc etc etc.

  However, ultimately I just value all non-active disk partitions, rebooted the PC and went up in some menus weird (never seen that one before) which forced the office back to factory default (including the "thank you and welcome to your office purched brand-new", lol) and after that everything was done the graphics card acknowledged again and errors stopped. Being curious, I installed Windows 7 once again, and all the problems started once more. After a reset, I installed Windows 7 for the third time, but this time by using "update" rather than clean-install and that seems to work great so far.

  So: to assign all non-active partitions, and restart the PC. What he has done for me in the end.

• Satellite A100-002 - freezes when installing Windows 7

  Hello

  I have 1. Satellite A100-002 and 2. big problem with the installation of Windows 7.

  2 years ago I tried to install Wista - but it froze during installation, whenever I tried. of course, I tried different versions of Wista.
  Once I managed with installation - but he keep gel al the time - immediately after departure.
  so I gave up - and I'm back to XP

  now I'm trying to install Windows 7 and again the same problems :(

  can someone tell me whats wrong? -a really need him.

  Thank you very much

  Hello

  When the laptop just hangs?

  In addition you using SATA drivers or install it in compatibility mode?

• Laptop HP 15-R014TX: lost 8.1 pre-installed Windows.

  Recently, I tried to install Ubuntu on my PC, but accidentally ubuntu installation formatted the entire disk, including the recovery disc. Now that I am running Ubuntu and want to install window 8.1 again but didn't have the key to it. Is there anyway to recover the key.

  The key is embedded in the BIOS, so if you run the installation media for the right version (Home or Pro and not retail OEM) it will activate only. The other problem you'll have is to get the boot to Ubuntu grub loader works after installing Windows again the long side.

  http://www.howtogeek.com/186775/how-to-download-Windows-7-8-and-8.1-installation-media-legally/

  Post back if you need further assistance,

  If it's 'the Answer' please click on 'Accept as Solution' to help others to find,.

• HP compaq 15 h000na: can't get back into windows after installing windows 10 [attention] 8?

  Microsoft and hp did an automatic installation of windows 10 and that my old system was windows 8 Andi want to return because the internet explorer 11 is now 64-bit and Windows 8, it is 32-bit, this i where the problem is, a lot of sites do not support windows 10 due to the Explorer currently 64-bit, ibecause now I can't pay your bills online that's why I want to go back to windows 8 , but I can't because then installing windows 10 he has deleted all the files of windows 8 operating system and many other people are having the same problem, microsoft made a remote server to try to find the problem but after 4 hours, they told a lot of people have had the same problem and there was nothing they could do hp says the same thing, now, I thought that I or we had 30 to change my or our spirits come back back so why cant I go back, windows 8 has been preinstalled on my laptop to hp should have the windows software code 8 then why slope they send me this code so that I can have windows 8 , microsft also said that me [i] properly installed windows 10, once again why cant I return to windows 8 and b4 a replys I and the foregoing did all the tests on my laptop and the only thing that remains is for hp to reinstall windows 8 on my laptop, because I have to use my very old another laptop running xp to pay bills online , then what is the point of upgrading to windows 10 and having to use windows xp on old laptop and what was the point of buying me a new laptop last year

  I pressed the button for windows accecpt 10, but read all about it very carefully before installing and it asked to save all of my files that I made, microsoft and hp recommemed I installed windows 10 but you have 30 days to change your mind, windows 8 has been preinstalled and he warned an installation of usb media and says all the websites are supported so u take all this in any good faith, I'm not a super user just a plain person who wants to use his computer and when I want to and do not have all these hassle to write things up and find a hell of a lot of other people with eactly, same problem, microsoft installed a 4 hour remote to find if it was my fault or the fault of the laptop and found nothing and told me it was a problem with 10 windows and they said as a lot of others having the same problem where they cannot restore when they want too, if microsoft had said that there are a lot of sites supporting windows 10 then don't you think [IE me] would wait b4 I installed windows 10 also microsoft has in an email said to try to get these sites to upgrade why the fak must do this, like I said, I don't want all this crap I want to just turn on the laptop and use bloody like most people and not microsoft and hp did not force me but they recemended by e-mail and through my warranty upgrade so that was what I did the second , the only one the way back he semms is hp have my original numbers of windows software 8 not as I regis this sytem with hp, then u would have thought to email me windows 25 digits 8 none for me to install software, microsoft must make it clear that this windows 10 is not supported on the sites of somes and hounor cancellation of 30 days , and what is the bet that they contact me after 30 days and say oh u can't go back, but if you have done this or spoke to them u might have rollback, and this second would make it even more of a pain fffffff.

• p6130nl making noise after installing windows 7?

  Hi, I removed from Windows vista and installed Windows 7 (using a custom installation, not 'upgrade', so that the computer has been cleaned), but now it makes a humming noise when turned on. He had always made this noise then boot the system, but generally, it became quiet after the start-up had finished. Now, the noise persists. I already opened to check the fans, but they do not seem to be the problem; the noise continues even when I stop the fans spinning.

  What is the problem and how to fix it? It seems strange to me that something like clean the PC (deletion of all programs, etc., do not "clean up" the office itself) and installation of Windows 7 may cause sudden hardware problems...

  Thank you in advance!

  I managed to solve it after a night of messing around; installing new drivers did not work whether, since the problem is that it does not load the driver until the video Bios has been updated. And install other windows operating system did not help either, or formatting the drive etc etc etc.

  However, ultimately I just value all non-active disk partitions, rebooted the PC and went up in some menus weird (never seen that one before) which forced the office back to factory default (including the "thank you and welcome to your office purched brand-new", lol) and after that everything was done the graphics card acknowledged again and errors stopped. Being curious, I installed Windows 7 once again, and all the problems started once more. After a reset, I installed Windows 7 for the third time, but this time by using "update" rather than clean-install and that seems to work great so far.

  So: to assign all non-active partitions, and restart the PC. What he has done for me in the end.

• Satellite A300-1 OC - problem installing Windows XP

  Hi all!

  Faced with the need to install * Windows XP * on my * Satellite A300-1OC. *.

  Here's the problem:
  the * pilot integrated distribution OS for the SATA downloaded from the Intel site.
  When you install XP no problem, but * when you drive where to install the system all the drive letters got mixed up *.
  As it has already established a system, the * laptop starts sometimes hang on for 2-3 minutes, then again normally.* operating

  Help solve this problem and recommend the correct SATA driver for my computer.
  And I would like to hear the difference, * if I set BIOS compatibility mode or leave AHCI.*

  + Thanks in advance. +

  Hello

  Please, read here:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=52625&TSTART=30

  It may be useful for you. The topic starter had the same problem, it instaled windows, compatible mode, and then extract the driver of the exe files.

• Problem using Bootcamp to install Windows 8.1 MacBook Pro

  Hello

  I have a MacBook Pro (retina, mid-2012) running OS X El Capitan v10.11.1. About two years ago, I installed Windows 8.1 using boot camp with no problems. Since then, I upgraded HDD from the laptop of the original 500 GB SSD to a Transcend JetDrive 725 960 GB SATA III. Note, this is the only upgrade material I have made to the computer. Following this hardware upgrade that I decided to only restore my Macintosh HD, or unfortunately I will not restore the Bootcamp partition.

  I am now trying to install Windows 8.1 using training camp again, but unfortunately a few problems that prevent quick installation, I've experienced in the past. I have read this problem a lot but have not found a solution that works for me. Here are the steps that I've repeated several times:

  -Download an ISO of 64 bit Windows 8.1 since: https://www.microsoft.com/en-gb/software-download/windows8ISO.

  -Connect Force SanDisk Cruzer 8 GB USB 2.0 support

  -run Assistant Boot Camp

  -check all the tasks and continue

  -create a 60 GB partition

  -computer restarts automatically, and a windows setup screen

  -Enter the serial number of the product

  -Select installation upgrade, see here: http://s20.postimg.org/t7wy0siod/Photo_07_12_2015_12_16_23.jpg

  -PROBLEM: I am told that the installation cannot complete, see here: http://s20.postimg.org/day642qa5/Photo_07_12_2015_12_16_31.jpg

  I repeated this a few times with several USB 2.0 flash drives, but with the same results. I also tried selecting ' Custom: install Windows only (Advanced) ", but the next screen does not allow installation on the bootcamp partition, see here: http://s20.postimg.org/3mkq0xvgt/Photo_07_12_2015_12_15_09.jpgand here: http://s20.postimg.org/5pv58lv9p/Photo_07_12_2015_12_15_00.jpg "

  I would be grateful if someone could please help with this problem.

  Thank you

  Al

  alastairhm wrote:

  I repeated this a few times with several USB 2.0 flash drives, but with the same results. I also tried selecting ' Custom: install Windows only (Advanced) ", but the next screen does not allow installation on the bootcamp partition, see here: http://s20.postimg.org/3mkq0xvgt/Photo_07_12_2015_12_15_09.jpgand here: http://s20.postimg.org/5pv58lv9p/Photo_07_12_2015_12_15_00.jpg "

  It is the expected behavior. OS X does not have a license for the creation of NTFS. It creates a FAT partition. After the error, select the Format for only the partition named Bootcamp (do not use another partition) and let the installer to format it to NTFS and continue the installation.

  Upgrade will not work, because there is no previous installation of Windows to upgrade. You see the error message is correct.

  See also https://help.apple.com/bootcamp/assistant/6.0/ .

• Problem installing windows XP on the IdeaPad G550

  Last week, I bought lenovo G550. It came with Windows Vista. I want to install Windows XP on it. I found that lenovo has driver for windows XP, which will make my life easy :-) But when I try to install windows XP last night, I got blue screen several times. I get a blue screen after Windows XP loads all drivers (status winidow in installing windows XP displays "Starting windows xp setup") and he pours (blue screen). I ran chkdsk and diagnosis of memory and both went really well (not reported no error).

  Is someone else has encountered the same problem? I have a stupid mistake? Please help me

  Your response is much appreciated.

  Thank you

  Noémie

  Welcome to the forums

  You should maybe spend in compatible mode ACHI sata in bios yout and check again

• Windows Vista keeps wanting to install the same update again and again. This is the Internet Explorer 8 for Windows Vista for x 64-based systems update.

  This update keeps coming back even if it has been installed at least 15 times. Does anyone know why it keeps doing what/how stop?

  This problem may occur because of corrupted content of the Software Distribution folder.

  Rename the software file Distribution try to access the Windows Update site again.

  How to rename the software D folder in Vista - distribution agent version

  1. stop the Windows Update service (make sure that you are logged on as administrator)

  Start button | Control Panel | System and Maintenance | Administration tools
  Double-click on Services
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click on stop.

  2. Click Start, type %windir%\System32 in the search box and press ENTER.

  Find and rename the folder C:\Windows\SoftwareDistribution.

  3. start the Windows Update service

  Start button | Control Panel | System and Maintenance | Administration tools
  Double-click on Services
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click Start.

  This procedure will erase your history on the Windows Update Site. Not important.

  Reboot - without having to restart, the new folder could not be created successfully.

  TaurArian [MVP] 2005-2010 - Update Services

• Windows update KB979909, KB982168 and KB974417 install over and over again

  Windows update KB979909, KB982168 and KB974417 install over and over again. This update I had during the last few weeks over and over again. Installation and restart and the update comes again. How can I stop this? Looks like the only way to stop the automatic update for windows :-(

  permini,

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  KB982168

  KB982168 is optional, not updated safety information. Feel free to hide it

  1. stop the automatic updates service:

  Start > run > services.msc (enter) > [OK]

  Double-click Automatic Updates > click Stop (stop the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > %windir%\SoftwareDistribution (enter) > [OK]

  Open the download folder and delete its contents

  Close the window.

  3. go to the Windows Update Web site. Select CUSTOM and allow the analysis to be performed. Uncheck the box/deselectKB982168 and hide ("don't show me this update").

  4. start the automatic updates service:

  Start > run > services.msc (enter) > [OK]

  Double-click Automatic Updates > click on Start (start the service will take a moment)

  --

  reset

• Error message "the website has encountered a problem and cannot display the page" when you try to install Windows XP SP3 update

  Original title: cannot use Windows Update to install Windows XP SP3

  I have done a complete reinstallation of Windows XP Pro from the original disc and managed to update to SP2.  However, when I tried to upgrade to SP3, I got an error that "the site has encountered a problem and cannot display the page.  I tried all the suggested fixes that I can find.

  During the last attempt, I discovered that several dll is missing.  Here's the msxml6.dll, wups2.dll, c:\windows\system32\wucltux.dll and c:\windows\system32\wuwebv.dll.  If they are critical, where can I find them, and how do I get support.

  In addition, mshtml.dll is available, but the DllRegisterServer could not find an entry point.  Is this critical?

  In any case, I still can I install Microsoft Update or download/install SP3.

  The computer is an IBM R50e laptop.

  Thanks for any help you can give.

  Try to run this tool to windows update. This will help to re-register the dll

  After its done. try again and do the update

  hope this helps

• Why Windows XP security KB2509553 you want to install over and over again?

  Why update Windows XP Security keep wanting to install over and over again? It installs successfully, restart, and then download the update again.

  Hey Lianne,

  Without answers to the question of the PA bear some basic troubleshooting steps, you can try to run SFC/scannow to check that there is no corruption in the system. I would sayCheckSUR check that no package system who have to be damaged running. If you are still not able to solve this problem, then try to run this utility:http://support.microsoft.com/kb/971058

  If you could answer bear PA questions that would help us refine what may be the real problem.

• It keeps saying "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. "When I tried to reinstall Windows Vista Home Premium

  I removed the original defective hard drive and installed a new one in my Desktop HP Pavilion. Then, insert Vista Home Premium Recovery Disk 1, then 2 disc. After the prompt to restart the computer to complete the installation of Windows, I got this error message:

  "Windows Setup could not configure windows to run on this computer hardware."

  I then click OK and then this message:

  "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. »

  I have computer knowledge very very basic.

  Please help me!

  Thank you

  Hello

  You will need to contact HP for the problems with the help of the HP restore procedure is not a process from Microsoft.

  You can also try the Forums of HP Support for assistance.

  http://h30434.www3.HP.com/

  See you soon.