install windows xp pro-1pk-sp3 cd. But there is no sound. Help, please.

Similar Questions

• HP dm4-1165dx, I recently installed windows 7 pro. my wifi button stays amber now? Need help.

  I recently installed Windows 7 Pro on my HP dm4-1165dx.  Now, I can't my wi - fi to work?  Amber light stays?  Please, I need help.

  That worked very well.  Thank you very much.

• Is it possible to install Windows XP Pro. SP3, with its bootable CD slipstreamed, in an external USB2 media (HARD/flash stick drive)?

  Hello!

  Is this possible? I know it is slow due to the speed of USB2, but it is only for rapid tests and do not want to mess with my internal hardware (HARD drive has an old Windows XP Pro. Installation of SP3 with lock hard ups with videos - need to understand if it is my software or hardware) in my current computer. In addition, it doesn't help that I have a disability (cannot yet use a screwdriver).

  Thank you in advance. :)

  Hello

  XP was not designed for what you want to do.

  XP is designed for use on internal hard drives.

  There are various ways that people on the Net have resulted in do.

  You would have to use Google for this information.

  Here is an example after a search on: "how to start xp from a USB key or external hard drive.

  http://www.ehow.com/how_4853554_install-XP-external-hard-drive.html

  You run into problems of Activation that you would need a second XP license if you use the same XP disk because a license is not good for one Installation, even on the same computer.

  See you soon.

• installed windows xp now nothing on my computer is recognized. Need help please!

  OK so I installed windows and now it doesn't recognize anything on my computer. When I go to 'Start', 'Run' and type dxdiag it shows n/a for the graphics card and s/o to the sound card...

  After you perform a clean installation of the operating system, you must then install drivers for all your hardware. Looks like you have not carried out this operation.

  Never get the drivers from Windows Update. Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - system information for Windows MS - MVP - Elephant Boy computers - Don ' t Panic!

• Have downloaded video 40mins Humax box flash drive, then to Windows Media player, I can play but cannot burn to DVD, HELP please.

  As it is said above, why can I not burn on a DVD + RW 4.7 GB.

  This problem happened to me before, what program did you use to burn DVDs, windows media player can only burn songs on CD/DVD, not work for video files. You can try another call convertxtodvd DVD burning program, it solve my problem, and here is a guide step by step on How to use it to burn videos to DVD to play on DVD player. Write me if you need another Assistant.

• After installing windows XP Pro my computer does not start correctly

  After you have installed Windows XP Pro on my HP Pavilion (updated to XP home), my computer will not end the restart process.  I have repeatedly in a loop once the blue screen with the HP logo.  When this has happened before after installing a pack of updates for XP Home, we just started in safe mode and then had it will restart at an earlier time, thus eliminating the updates.  However, now when I try to start in safe mode, I get an error message that says: "Windows Setup cannot start in safe mode" and I leave safe mode.  We hoped that by installing Windows XP Pro, this problem should go away.  Can anyone help?  I have read several other entries in the forum for similar problems, but they all have to do with updates.  This is the first time I was not able to use safe mode, so now I'm stuck.  I hope that I can avoid having to perform a full system recovery, since it is a long involved process and having once before, I always felt the same restart problems after installing updates.

  PA bear,

  Thank you for help... After reading several posts in the forum, one of them reminded people to check with the manufacturer of the computer so that possible solutions... and this is the solution here, I wish I thought of him earlier... I did a system recovery to remove the Windows HP Pro and return to the original version of the default value.  Then I went to the HP site and downloaded the patch according to their directions.  Problems fixed! :-)

  Any PERSON HAVING HARD REBOOT YOUR HP PAVILION (with an AMD processor) after you install Windows XP service pack 2 or 3 updates:

  HP has a patch that solved all my problems.  Clearly, service packs contain information for Intel processors that is in conflict with AMD processors in many HP Pavilion desktop computers.  You can go to their customer service solutions website and download the patch.  Since I did it, I had no other problems. I wish just that I had discovered the solution until I had to do a full system recovery.

  If your computer hangs on reboot 'loop', see if this info. HP will help you:

  The computer restarts after a Stop error message display 0x0000007E (after update with Service Pack 3 for Windows XP)

  If you have had problems with XP updates, including service pack 2 or 3, try this page:

  Before you install Windows XP service pack 3

  Please pass on to other similar issues.

• How can I install WIndows XP Tablet edition SP3 on TouchSmart tx2?-urgent

  My TouchSmart tx2 installed Win7. I want to install WIndows XP Tablet edition SP3. But it always becomes blue screen during the installation, even when I format the drive with win7. How do I do?

  Consult the following weblink where Daniel has provided detailed steps to overcome the Blue error screen when you try to install Windows XP:

  http://h30434.www3.HP.com/T5/operating-systems-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/TD-p/114120

  Check out the link next where Cheryl provided the necessary driver links:

  http://h30434.www3.HP.com/T5/operating-systems-and-software/General-XP-downgrade-Guide-for-HP-laptops/TD-p/83267

• Unable to connect to the internet after installing Windows 8 Pro

  I installed Windows 8 Pro on my laptop, but I can't connect to the Internet. When I diagnose the problem, it can not find the problem. I use a computer dell laptop. The notification on the corner of the Office says I'm connected. I use a wifi that works fine as I can connect my iPad with it. Can anyone help?

  Hello

  Thanks for posting your question in the Microsoft Community.

  I understand that you can not connect to the Internet after the installation of Windows 8 Pro operating systems. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. you receive an error code or message?

  2. what web browser do you use?

  3. don't you try to connect to a wired connection?

  4. What is the Dell laptop model number?

  Please follow the methods and mark the question below:

  Method 1:

   

  Step 1:

   

  Start the computer in safe mode with network and check if the problem persists by following the link below.

  Start settings for Windows (including safe mode):

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  If the problem does not persists in Mode safe mode with networking, and then perform a clean boot.

  Step 2:

   

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

   

  Method 2:

   

  Follow the steps in the link below.

   

  Wireless and wired network problems:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  Method 3:

  Follow the steps described in the links below.

   

  Why can't I connect to the Internet? :

  http://Windows.Microsoft.com/en-us/Windows-8/cant-connect-to-Internet

   

  A Wi - Fi & networking:

  http://Windows.Microsoft.com/en-us/Windows-8/connect-Internet#1TC=T1

   

  For reference:

   

  Connect to the Internet:

  http://Windows.Microsoft.com/en-us/Windows-8/connect-to-the-Internet

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Pavilion model 11-n001sa: installing Windows HP pro on the HP Pavilion model No. 11 - n001sa

  I replaced the original hard disk, it was windows 10 installed.

  This small laptop is idea for my Renault Clip software, so we need to install Windows XP pro.

  I tried different setting in the bios, XP is listed, theres so no reason for it not install it!

  Using windows XP pro sp 2 & 3 installation disc, but keep the blue screen dreaded towards the end of the installation.

  Come on HP, I need your advice please.

  Hello:

  There is a very good reason that XP does not install.

  Intel did not provide any sata ahci drivers for the chipset that has your laptop.

  That's why you got the BSOD.  XP cannot find the hard drive.

  The latest processors from Intel-based notebook chipsets which had support for XP have laptops with the 7 Series chipsets.

  Not to mention the fact that you wouldn't find any graphic or wireless drivers for XP even if you can get it (that you can't) install.

• Installation of drive Media Express before you install Windows XP - Pro?

  Hi all

  I want to install Windows XP Professional on my Satellite A100-153.
  I have already done all the backups, created a tool and driver CD and I'm ready to start... BUT:
  What the Express Media Player? I have a recovery for the Express Media Player CD. What do I need to run the Express Media Player Recovery before you install Windows XP Pro?
  I'm not reinstall my Windows XP HOME Edition. As I am used to work with the XP pro edition I have a Windows XP pro. So no recovery.

  Can someone help me?
  Thank you very much!

  Hello

  Installation of the drive, I found a FAQ document very useful on the Express media:
  http://support.toshiba-tro.de/KB0/TSB58014O0008R01.htm

  In addition, on the HARD drive should at least 150-200 MB of free space available.
  This free space must be on the end of the HARD drive and there must be unallocated.
  To get this free space of HDD the 3 products part must be used namely Partitions magic 8

  good luck buddy

• Cannot install Windows 10 Pro bootcamp support software

  I have recently installed Windows 10 Pro on my MacBook Pro (15-inch, mid-2015, retina), OS X El Capitan 10.11.3 (15 d 21). After Windows restarted, bootcamp has started to install drivers from support and hung on the Realtek driver. Let him all night but he still has not made progress, so I closed the installation program. Now I can't find how to restart, or to download the drivers and install them manually. I had to hold the option key when you restart back into OS X. According to the oldest documents, I tried rerunning the bootcamp assistant to download USB drivers, but this version gives me the option to restore my drive to its original state. Does anyone know how to fix this?

  Thank you.

  I couldn't find a place to download the drivers for bootcamp support and discovered in training camp 6, the drivers are downloaded on a separate partition on the SSD (instead of USB drive). So I wiped the installation of windows and repartee with the intention to copy the downloaded software (which I did). Yet once bootcamp hooked when installing the Realtek driver and did some googling. I found this post that solved my problem. https://discussions.Apple.com/thread/6567790?TSTART=0

• 17 - e049wm will not install Windows 8 Pro

  So I got this machine of killer, upgraded to a new SSD and tried to install windows 8 PRO. Windows loaded fine, but it only installed Windows 8 regularly.

  Now here's the base line. Ive tried to install 5 different times, all with the same result.

  1: install boot disk

  2nd: post installation upgrade

  3rd: enabled Legacy support in the BIOS and I tried the new facility

  4th:upgrade post install with active legacy

  5th: disabled Legacy and set up fees.

  Another weird, that I should mention is the fact that he never ask me in setting up my license key. As soon as I check my activation it says that windows is activated, the product ID that ends in AAOEM.

  If this machine, wise, the bios is processing my drive of retail as an OEM disc and pre activating Windows 8 PRO, yet do not allow me to install the professional edition. I tried 2 Windows 8 PRO 64 bit retail of different disks without success.

  Even so much as ive tried the link "Get more features with a new edition of windows" and provided BOTH of my keys not activated without success, since it is reg 8 Win which installs

  IM advanced technology so feel free to talk tech to me. If it is not able to do I wouild like HP to provide me with the Windows 8 PRO for my model, just the OS disk without indigestion.

  Hello

  My suggestion: use Windows 8 Pro upgrade DVD otherwise you must call HP to erase the firmware as shown in the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/bipass-UEFI-provided-product-key-to-install/a271067b-D655-4b46-8B52-b3f191b9370c

  Kind regards.

• If I installed windows 8 rtm company I can install windows 8 pro at the end of the assessment?

  at the end of windows 8 rtm company can I install windows 8 pro and keep files and programs?

  Hello

  You should be able to keep files and settings, but you may need to
  reinstall your programs.

  To make sure you get check correct information in the TechNet Forums where Windows 8
  Enterprise Edition is supported.

  TechNet - Windows 8 IT Pro
  http://social.technet.Microsoft.com/forums/en/category/w8itpro

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Re-install Windows XP Pro: Windows will not start - WINDOWS/system32/config/SYSTEM missing or damaged

  Windows tells me to run the install from the original CD, and then to enter the 'r' to repair the problem. I never get: Windows reboots repeatedly, or it crashes just without giving me the chance to enter the 'r '.  A Windows XP Pro with SP3 iso file did not help; not more than another copy of a Windows XP Pro with SP2 CD. What should I do now? How can I systematically enter the Windows installation, and how can I do a repair installation?

  Yaaakov Kayman, retired engineer-programmer/software system (for the most-mainframe)

  http://support.Microsoft.com/kb/311755

  read the above for asms file missing

  ==========

  also please note that you can not do a repair install on xp sp3 with a cd of xp sp2.

  It must be a cd with sp3 slipstreamed CD.

  =====

  If you can get into your bios default and the cd to start everything first and try again, what happens this time?

  In addition, clean the cd by wiping gently from the Center to the edge, NOT in a circle, with a soft cloth wet litely.

  your cd can have a streak that gives you the error.

  =========

  It can also be your player, you have a tower with two drives? If so pass out them and see if the problem occurs.

• I have an Optiplex GX620, with windows XP Home edition, I can install windows XP PRO top?

  I have a virus that it needs formatting to remove. The pc running wondows xp home edition I can install windows XP PRO on it?

  Yes you can, but why?