Installation of drive Media Express before you install Windows XP - Pro?

Similar Questions

• 0x8007045D error code when you install Windows 7 Pro 64-bit

  I get an error 0x8007045D code when installing Windows 7 Pro 64 bit on the same same MSI 970 Gaming (AMD SB950 Chipset 970 +) motherboard, even OEM Win Pro SP1 7 X 64 dvd, the installation on an EVO of 840 Samsung 250 GB SSD.

  16 GB of Ram (4 GB X 4 stix. Ran this OS on this forum for a year, trying to do (was) a clean install. I am puzzled, never had a problem like this.

  I was the installation of the operating system, and you're right, when he was on the 2nd works. He remained at 0% for a while then I get this error message "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. 0x8007045D error code.

  Someone at - he already had this?

  Any help would be appreciated.

  Thank you

  Try to reduce the amount of RAM installed on a unique key and try again.

  If you have several hard drives attached, disconnect all except the disk target hard.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• Windows says no audio output device after you install windows 8 pro in my desktop computer.

  * Original title: sound problem

  After you have installed windows 8 pro in my desktop my windows says no audio output device is installed, I am already updated my audio driver in Device Manager, but its cant work, I'm also controls to restart windows audio in services.msc you please try to help me solve this problem

  Hello

  Press the Windows key + R to open the run

  Type dxdiag

  Click Ok

  Click on the sound tab

  If the drivers have been omitted you won't see a name only no Loaded device

  If you do not see a charge device click Test DirectSound

  If the Director plays with sounds, but you can not hear, check your speakers that can be turned off, disconnected, or broken.  Verfy pregnant are very good.

  Click Exit

  If the speaker is fine, go to the website of the manufacturer of your sound card and search for updated drivers.

  Download and install the drivers.

  Return to the screen of dxdiag and repeat the test for sound

  Click on the help tab if still problems

  Windows will guide you through more tests

• Cannot perform your recommended steps before you install Windows XP SP3.

  I'm just following Microsofts instructions on the steps recommended to install SP3, but the first step in creating a backup and a set of disks is impossible without a floppy drive.  Backup is done, but not useful until I have a updated boot.  I search all the forums to find an answer - but none out there and no responses to several messages from the user.

  Please tell me how to do this.

  Since you're web site told me no more updates until SP3 is installed.  I put this, because I couldn't save my system.  I don't have the original disks, because my pc was purchased from a seller who did not give those out.

  How do I make a bootable CD-ROM (boot from the ASR disk) for Win XP Pro so I can install SP3?

  Thank you

  C.

  How do I make a bootable CD-ROM (boot from the ASR disk) for Win XP Pro so I can install SP3?

  http://search.Yahoo.com/search?p=how+do+I+make+a+bootable+CD+ROM+%28ASR+boot+disk%29+for+Win+XP+Pro+so+I+can+install+SP3%3F&EI=UTF-8&FR=HP-PVDT

• New hard drive, installed Windows XP PRO version 2002 - resolution screen and internet problems

  My Dell has had some problems (patially due to age), so a buddy of mine and I put a new hard drive in it and then installed windows XP Pro.  Installation went great, but now that it's installed, I can not get the screen resoultion to change and I can't connect to the internet.  I feel like with the internet, can I have a driver problem.  I know that the internet works, I'm on it with the laptop right now.  Any suggestions?

  ????  I'm not sure I understand your question. You download the drivers to a place, you will find them, as the office. If you want to put them on a USB stick, copy the files downloaded to the key and take it to the computer target. Copy the files on the computer desktop. Double-click on a file and it will unpack the installation routine starts. Follow the installation wizard. Reset when said to repeat as needed until all the drivers, etc are installed. Subsequently, you can delete the downloaded files from Dell (from installation .exe). MS - MVP - Elephant Boy computers - don't panic!

• Q327120 error when you install Windows xp sp3

  Original title:
  error code
  When I try my winxp sp3 his watch after error what is the solusion? Pls help

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question. If I understand correctly, you receive the Q327120 error when you install Windows xp sp3. I suggest you follow the troubleshooting steps to check if this may help.

  You did changes to the computer before the show?

  Method 1:
  You can try the steps in knowledge base article and check.
  Error message: Windows Service Pack 1 has detected that one or more protected Core system files on your computer have been modified
  http://support.Microsoft.com/kb/327120

  Method 2:
  

  Perform a clean boot and then try to install and check.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Check out the link:
  How to download Windows XP SP3
  http://support.Microsoft.com/kb/322389

  Reference link:
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  If you need further assistance, please answer and we will be happy to help you.

• Installed Windows 7 Pro 64 bit on original Vista CQ60 and now can't do the system recovery

  I have a Compaq Presario CQ60-320SA, which came with Vista Home Premium 32-bit and do a new install of 7 Pro 64-bit.  Now I want to go back but F11 does not work, and there is no recovery for a reason Manager any. The recovery partition is still there.

  I don't have useful recovery discs because when I tried to make them when I got the laptop, the process has failed for an unknown reason (I asked the TechGuys, who suggested to use a better quality than DVD, but I don't bother).

  What can I do?  Is my only option of order recovery disks?

  The main point of this exercise is to get the original settings before you install Windows XP 32-bit.  Which is the best thing to do, or should I just go directly from 7 to XP?   Will I have problems if I decide to go back to XP?

  Thank you

  No, just be sure that install you XP to the right partition, (a greater) and not to the recovery partition.

• After installing windows XP Pro my computer does not start correctly

  After you have installed Windows XP Pro on my HP Pavilion (updated to XP home), my computer will not end the restart process.  I have repeatedly in a loop once the blue screen with the HP logo.  When this has happened before after installing a pack of updates for XP Home, we just started in safe mode and then had it will restart at an earlier time, thus eliminating the updates.  However, now when I try to start in safe mode, I get an error message that says: "Windows Setup cannot start in safe mode" and I leave safe mode.  We hoped that by installing Windows XP Pro, this problem should go away.  Can anyone help?  I have read several other entries in the forum for similar problems, but they all have to do with updates.  This is the first time I was not able to use safe mode, so now I'm stuck.  I hope that I can avoid having to perform a full system recovery, since it is a long involved process and having once before, I always felt the same restart problems after installing updates.

  PA bear,

  Thank you for help... After reading several posts in the forum, one of them reminded people to check with the manufacturer of the computer so that possible solutions... and this is the solution here, I wish I thought of him earlier... I did a system recovery to remove the Windows HP Pro and return to the original version of the default value.  Then I went to the HP site and downloaded the patch according to their directions.  Problems fixed! :-)

  Any PERSON HAVING HARD REBOOT YOUR HP PAVILION (with an AMD processor) after you install Windows XP service pack 2 or 3 updates:

  HP has a patch that solved all my problems.  Clearly, service packs contain information for Intel processors that is in conflict with AMD processors in many HP Pavilion desktop computers.  You can go to their customer service solutions website and download the patch.  Since I did it, I had no other problems. I wish just that I had discovered the solution until I had to do a full system recovery.

  If your computer hangs on reboot 'loop', see if this info. HP will help you:

  The computer restarts after a Stop error message display 0x0000007E (after update with Service Pack 3 for Windows XP)

  If you have had problems with XP updates, including service pack 2 or 3, try this page:

  Before you install Windows XP service pack 3

  Please pass on to other similar issues.

• I got following message from the installation program Adobe - other instances of running Applications Adobe Manager that must be closed before you install this product. Please close or wait until they end. Please indicate how can I resolve the issue?

  I got following message from the installation program Adobe - other instances of running Applications Adobe Manager that must be closed before you install this product. Please close or wait until they end. Please indicate how can I resolve the issue?

  Please check if this helps https://helpx.adobe.com/creative-suite/kb/error-instance-updater-running-cs5.html

  Concerning

  Stéphane

• When you install windows 95, which is the executable that launches the installation process, and where it is located?

  When you install windows 95, which is the executable that launches the installation process, and where it is located?

  The file is setup.exe.  Depending on your version of Windows 95 CD, it could be in the WIN95 folder or in a subfolder of WIN95.

  If you have more Windows 95 questions, great places to get responses are microsoft.public.win95.setup and microsoft.public.win95.general.discussion newsgroups.  It is a Windows XP forum.

• Trying to backup computer, get the error message "the C: drive has errors" "Windows has detected corruption of file system on C:. You should check the drive for errors before you can restore it. »

  I'm trying to back up my computer and so I went to back up files and attempted to save DVD RW Drie (f), then recovery (E :).  Then in the form following, I clicked on next, and I get the message "the C: drive has errors" error "Windows has detected corruption of file system on C:. You should check the drive for errors before you can restore it. "I hit the" check the drive for errors and it told me that windows can't check the disk in use then I hit the schedule disk check. "  and then nothing happened.  What should I do?  How can I save my files?

  I planned it, rebooted, and nothing happened.  I have tried three times now

  Hey Ruffscicle

  read the information on how to run the check disk at the link below vista64.com

  If the first method does not work, try the other methods

  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  have a Happy New Year

  Walter, the time zone traveller

• Before you buy Windows 7 it will modernize my Windows XP?

  Before you buy Windows 7 it will modernize my Windows XP?

  First, see if your computer meets the Windows 7 system requirements:

  o 1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor
  o 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)
  o 16 GB available space disk (32-bit) or 20 GB (64-bit)
  graphics device o DirectX 9 with WDDM 1.0 or higher driver

  If so, run the Windows 7 Upgrade Advisor to check for possible problems.  If it passes this test, you can buy a Windows 7 upgrade version and use it to perform a custom (clean) installation.   For more information, see upgrade from Windows XP to Windows 7 and Windows 7 Upgrade Considerations .

• After you install Windows Vista, the maximum capacity of the hard disk reduced 80.0 GB to 3 GB

  Original title: reinstallment recent Windows vista has me to the maximum capacity of my hard disk (80.0 gb) why? __

  I recentlyreinstalled my windows vista, everything seemed to look and will work perfectly, so I decided to see how much space was left on the hard drive. My surpise there was only 3 GB of 80.0 gbhard drive. Now I'm sure that you would agree wiyh me and say that there is something wrong when installing on if so what can I do about it? You, I noticed there are some files like programs program then theres (86) below I see only in a few different places, as well as many files sent a text message if they are from my old program as if they never got deleted or formatted.

  Thanks for listening

  Hello

  ·        Did you do a clean install of Windows Vista without formatting?

  ·        How many letters pilot are there on the system, for example C:\, D:\?

  ·        The number of records your C:\ drive?

  Open C:\ drive and select all the files that are present and check what size is (of all files). Let us know the size.

  If you did a clean installation without formatting then, it may be a folder named windows.old. If you have the folder on the system, then follow the steps mentioned in the article below.

  How to use the disk cleanup feature to delete the Windows.old folder after you install Windows Vista

  http://support.Microsoft.com/kb/930527

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• MSVCR71.dll missing. I installed Windows 7 Pro to Vista Home Edition. EU back up my HARD drive. When I try to put things on the HARD drive I get the message that msvcr71.dll is missing. How to install Windows 7?

  I installed Windows 7 Pro to Vista Home Prem Edition.  Back up my HARD drive with the included HP software.  Now I can't get my info on the HARD drive.  When I try to open the computer file backup says msvcr71.dll is missing.  How to install and where?

  Hi dezertdawg,

  Welcome to the Microsoft Answers site!

  Msvcr71.dll errors are caused by situations that lead to the removal or corruption of the msvcr71 DLL file. In some cases, the msvcr71.dll errors might indicate a
  problem of registry, a virus or malware problem, or even a hardware failure.

  You can use the tool (SFC.exe) System File Checker to ensure that the system files are intact and replace the file. Follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, the following line, and then press ENTER:

  sfc/scannow

  http://support.Microsoft.com/kb/929833

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer does not turn off: "... copy windows is currently working with a file. Either wait to finish, or close it before you quit Windows. »

  Computer doesn't go out.  A box appears that says: "... copy windows is currently working with a file.»  Either wait to finish, or close it before you quit windows. »

  There is no files or programs.  I tried to wait a few days, but same box appears.  Can I just power off or unplug your computer.  It is great in every other way except closing.

  Vickie

  If you are absolutely sure that there are NO other programs or open files. Yes, you can go to start, then turn off the computer and select shutdown

  When you restart the machine. go to this link below and scan your computer

  http://www.Microsoft.com/security/scanner/en-us/default.aspx