17 - e049wm will not install Windows 8 Pro

Similar Questions

• Unable to upgrade to Windows 8.1, Windows store does not and will not install Windows Update.

  Original title: hard to upgrade to 8.1 - My App store Windows will not open, Windows updates Pc settings does not.

  Everything on my laptop is saying that it is "not responding" - opening of the photos, for example. My apps are no longer compatible - for example my e-mail address is not updated. I think it's all related to not updated to 8.1 - having a knock on effect to all the other bits on the laptop.

  The problem is won't let me upgrade. I understand that it is a slow process, but it won't let me even go up to the store to upgrade. What can I do?

  Really sad about that I just bought my laptop 3 months ago a result already loads of problems with it. (ACER LAPTOP WINDOWS 8)

  I had the same problem and finally came up with this fix. I hope it works for everyone who suffered from this annoying problem. Go to control panel, system, and security, the Action Center. In the center of the Action, open the settings Windows Smartscreen. Do not do anything (turn off Smartscreen Windows) check.

• Tablet Lenovo toga 2 will not "install windows" after refresh

  I had a yoga Tablet Lenovo 2 for Christmas and it worked fine for the first couple months, but in February he started working slowly and the system recommended an update where it I wouldn't erase my photos, videos or music. So I refreshed it, then it has restarted, he turned on to the LENOVO screen and says "Welcome". Then he said "put in place more than a few things" with a percentage going up. When he reached 100% a window comes up saying "windows cannot complete the installation. to install windows on this computer, run the Setup again. "And I did it, but he still continues to do so. It loads, I tried to maintain the restart button, but nothing happens. I looked online for the same problem, but found nothing. All solutions?

  Thank you

  Sofia G.

  Hi Sofia,

  I understand the frustration when things don't work as expected.

  If you are unable to boot to the desktop and have a Windows 8 install disc, then I suggest you to start your computer from the disc and open the command prompt in Windows recovery environment.

  Please check the suggestions by Reda Singh from the link below and see if it helps.

  https://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/error-Windows-could-not-complete-the-installation/a236b3c2-AC4B-4fe9-B4C3-0c23bb8360d9

  Back to us for any issues related to Windows in the future. We will be happy to help you.

• Vista Home Premium 64-bit: Side-by-side configuration incorrect, C++ Redistributable is not installed, programs will not install, Windows Update will not work.

  Greetings!  Please read this and thank you in advance for your help.

  A few months ago, I started to receive Windows Update errors, indicating that my Windows platform could not update itself.  Soon after, I started getting errors about C++ Redistributable does not install correctly.  It wasn't a huge problem for a while, and I managed to work around it.  However, my antivirus program is dead, and I'm unable to install a new.  When I try to install programs now, I get the error "side-by-side configuration is incorrect."  I would like to delete the manifest and try to reinstall the application, but I don't know where they are.  At least, it would be a start.  In any case, I am currently without virus protection.  Help!

  So far, I tried to uninstall the Windows updates, but I only managed to install the MS Office updates.  I have even office, although I understand that it is built into the operating system of our days.  I tried many different patches of a lot of different forums and nothing seems to work.  I would like to reinstall the OS, but I bought OEM (from Newegg) and do not have the disc.  I don't even have an easy backup, or even one that I know is 'good'.

  Thanks again for your time and effort.  They are appreciated more than you can imagine.

  -Sean

  Why you didn't say what you did before?

  Borrow a Vista DVD and don't reinstall Option I gave you.

  Or borrow a disc and do a repair installation; It's your call.

  Read this tutorial on how to do a repair installation:

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon. Mick Murphy - Microsoft partner

• Updates will not install, Apps will not install Windows 8 error Code: 0x8020002e

  We have 3 Machines, we're the United States (S7 computer laptop from Acer) and 2 other desktop

  None of them are able to install windows updates, or install apps on the Store.
  I did a clean install.
  Created only a user MS (Hotmail) account
  Stop the Windows update service, deleted the files from windows update, reactivated the service and tried again. (still no 0x8020002e)
  Disabled the WSUS service on the server. And I tried to install each update manually.
  Changed in the locale and updating the time.
  Uninstalled all anti-virus and activated the default firewall.
  Ran sfc/scannow (even after complete reinstallation of Windows 8)
  Everything ran as administrator, but the updates and app downloads all fail.
  Also, met with MS support guys that they connected remotely with Support.me, and haven't found anything.

  This is not a solution for everyone in general - but we found that the problem was related to the Cyberoam firewall unit was actually blocking traffic to the store - once he was removed from the internet packets audit exceeded the updates.

• OfficeJet Pro 8615: driver will not install windows 10

  Upgrade to Windows 10 windows 8.1.  Printer worked fine for a while.  The 8/30 began to have problems with printing.  Since then, have run print and scan doctor, installation software and follow all the steps detailed on the support site several times but nothing has fixed the problem.  Indeed, after you uninstall as recommended during this process, the pilot don't reinstall it not. I tried to run the full driver package, the base driver package and method of windows driver.  It is very frustarting.  I've exhausted all possible solutions on the support site.  I need to know what to look for and the steps needed to install this driver properly and restore the ability to print.  Please help before I think it necessary to change Epson or Lexmark.

  Thanks for getting back to me. Knowing that the printer will install properly on a another computer told us there is probably something on the current PC is blocking the installation of installation (the printer itself is fine). Alternatively, you can try to disable the firewall or security programs you have temporarily while you try to install the printer on the computer to see if this will allow to complete the installation.

  Just to add: make sure that the printer is on the same network as the PC you install it on. Find the printers IP address in the menu wireless printers and type the IP address in a web browser on your PC. You should be able to access the built-in web server printers if the printer and PC are on the same network.

  Here are some steps more to try it too:

  Step 1: Uninstall the device:

  Just because it is possible that a part of the software package and the pilot has made its way on your computer, I have to you find and remove the installation of the computer files.

  1. Click on the Start menu
  2. Click on all programs
  3. Select the HP folder
  4. Select HP Officejet
  5. Select Uninstall
  6. Click on the Start menu
  7. Select the devices and printers
  8. Click on any device once in the file devices and printers just to highlight. Then click on the print server properties at the top of the window

  

  9. click on the drivers tab

  10. click on your driver HP Officejet

  11 select Remove downstairs

  

  12. in the window Remove Driver and package click delete the driver only , and then select OK

  13 click on apply then OK in the print server properties window

  14. close devices and printers

  Please proceed to the next step.

  Step 2: Unlock hidden system administrator account:

  1. Click on the Start menu and in the box "search programs and files", type CMD
  2. CMD will fill as a search above, option just right click on it and "run as administrator"
  3. CMD (command prompt) opens, type net user administrator / Active: Yes and press enter
  
  on your keyboard
• Next, close CMD, then restart your computer
• When your computer is on the newspaper in the new account which should show. It will be called administrator , and you have a password on it.
• If your computer automatically connects to your account after reboot to go into your Start menu, click the arrow next to 'shutdown' and choose 'switch user'. Now log in the administrator account.
• Under the administrator account, please click here to download the package full feature software and driver of your printer.
• Once the download is complete, follow the instructions on the screen to install your printer
• Once installation is complete, please open the HP Solution Center software to confirm the scan software opens and works correctly
• If software HP Solution Center now works very well, please log out of the account administrator and return to your normal user account.
• Under your user account, the full-function software package and the printer driver must show completely installed. Please click on the HP Solution Center icon to confirm if it always opens correctly. If HP Solution Center opens very well please run a test scan to confirm functionality.

If the HP Solution Center software works very well, you need to hide the administrator account.

Step 3: Hide the system administrator account:

1. Go to your Start menu and in the box "search programs and files", type CMD
2. CMD will fill as a search above, option just right click on it and "run as administrator"
3. CMD (command prompt) opens, type net user administrator / active: No. and press enter
4. Next, close CMD, then restart your computer
5. When your computer turns on it please test the software HP Solution Center again to confirm that everything works again according to normal.

Let me know the results of these steps, good luck!

• Goal for Firefox will not install on Surface Pro with Windows 8.1

  I received an email from Firefox on the installation of the sidebar "Goal", that sounds good. However, I can sit here and click on "Activate now" all day, but nothing happens. I have had no problem in adding to my android phone, on my Pro Surface.

  Try the activation page, using activate now > > button.
  https://activations.CDN.Mozilla.NET/en-us/goal.html?utm_source=snippet & utm_medium = Snippet & utm_content = WorldCup2014en & utm_campaign = WC2014 & SAMPLE_RATE = 0.1 & snippet_name = 4423

• Flight Simulator: Fs 2004 (FS9) disk #4 will not install on XP pro.

  First three discs load faster. Rear disc load slow and stops at 77% on the bar of load with this error message: "disk error;@scenery/cities/amsterd Encounted. ACR; Make sure disk is not full, and that the file is not in use. "I've got a Dell Dim E520 C2D, E4300 (1.8 GHZ); 2 GB of Ram; 256 mb ATI Radeon X 1300; that run on the operating system to XP pro. Any idieas? This is 'cleaned reboot;"scndisk; Defrag; uninstalled Fs 2002.

  Removed a temporary file; tried to install it in a different folder on the desktop. Created the folder... couldn't copy on CD-ROM in record high desk. No other discs could be copied to desktop. Tried the "scan" (right click) with CD-ROM drive... The scan never completed with disc #4. Didn't say there are errors, just kept turning the CD-ROM drive. I could try to load all the four discs in old computer (10 years) to see if the 4 disk is corrupted or damaged. But if he writes above DirectX 7 with DirectX 9 c. .t will destroy the old drivers and I keep the old PC to run old programs. But what are the chances that I have a corrupted disk? Who and how I will replace if FS9 is no longer supported?
  When I bought this PC in 2007 (BTW there installed SP3) it loaded and run Fs 2002 to 100 FPS. Why it won't install (let alone run) FS9?

  Hello
   
  Let's try the methods of troubleshooting provided in the article below and check if this help. Also, make sure that there is enough free space on the hard disk.
   
  http://support.Microsoft.com/kb/258496

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Drivers Ati Vista will not install on Satellite Pro A100 PSAACE

  I saw a number of other users in the forum with the same question. I looked a little further on my machine, and it seems the driver saves oneself is not worl or there is a hardware fault with the graphics card.

  Here, it's put him the catalyst installation error report...

  Catalyst® Install Manager
  Installation report
  Thu, July 12, 2007 13:28:08

  Hardware information
  Name of the ATI Mobility Radeon X 1400 graphics card
  Manufacturer ATI Technologies Inc.
  Device ID 0 x 7145
  Vendor ID 0 x 1002
  Code of the class 0 x 030000
  Revision ID 0x00
  ID subsystem 0xff10
  Subsystem vendor ID 0 x 1179
  Other materials

  Existing packagesATI Catalyst Install Manager
  Catalyst Control Center
  Microsoft Visual C++ 2005 Redistributable

  Packages for installation
  ATI Catalyst Install ManagerFinal status:
  Version of the article: 3.0.504.0
  Size: 20 MB
  DriverFinal ATI display status: failed
  Version of the article: 8.31.100.32
  Size: 90 MB
  Catalyst CenterFinal status:
  Version of the article: 2.0.2519.38216
  Size: 150 MB
  Microsoft Visual C++ 2005 RedistributableFinal status:
  Version of article: 7.3.0.0
  Size: 10 MB

  Other devices detected

  Error messages
  Driver installation: installation failed
  Installation of the application: failure

  After the execution of the executable, I tried to install the driver maually locate the files in the driver package, while windows recognizes the inf file, it gave an error saying that it could not read the device...

  Hello

  What graphics driver you used?
  One from the ATI Web site or the graphics driver for the Toshiba page?

  You must use the graphics driver on the page because Toshiba that these drivers are designed and specially modified for Toshiba laptops!

  I tried to use the graphics drivers for example, nVidia page, and I was not able to install it automatically.
  I find on this forum that the graphics drivers from Toshiba are slightly changed to prevent overheating of the graphics card.

  Due to a high performance graphic map of the temperature increases and can damage some parts inside the laptop.
  The graphics driver prevents the increase in temperature and slows down the performance of the graphics card. If temperature decreases the performance increases.

• Drive HARD Satellite A205 S5803 failure possible. It will not install Windows.

  Well. It's months now since my broken laptop. A few DAYS after my warranty missed. No one has been able to help me and this problem happens so many I can't even count. This model of laptop is not a good idea to buy. It all started with Windows not start. He would charge the Toshiba/Phoenix logo, then Windows bar loads, then nothing.

  Just a black screen. I could recover my files getting Puppy Linux and transfer my files from my hard drive to my external 500 GB hard drive that I decided to buy last night because I have a feeling that this will keep going if I continue to buy Toshiba. Nothing was wrong with my files, but I have a strong feeling my hard drive or some sort of material important died.

  So I try first to do a startup repair, because it should work humble? Well, he sat for 24 hours and did not a thing.
  So I thought OK fine I'll just reinstall the OS, I already had my backup files. I put the disc, go to Toshiba Recovery Wizard, say to delete all start again and reinstall my OS, and he tells me "failed to create Partition. Error 08 - 0 74-0000. »

  That's when I KNOW its something wrong with the hardware. I have nothing to do that.

  I didn't delete a file and it tells me this. Anyone has any ideas until I throw this thing away?

  The message indicates that the partition could not be created on the HARD drive.
  I put t know why but I remember that I had similar problem with my other cell phone from another manufacturer.

  I couldn't run the recovery by using the supplied floppy.
  Finally, I formatted my HARD drive using the Microsoft Windows XP disk and deleted all partitions from the HARD disk also.
  I then used the recovery again disc and the installation went well.

  Maybe you could try that too.
  Try to format the HARD drive using a disc like Win XP.

  Maybe the latter won't work

• Windows Update will not install - Windows could not search for new updates to Code 8007051 A

  original title: impossible to install iTunes error HRESULT:0x8007051A and Windows Update doesn't work Windows could not search for new updates to Code 8007051 A

  Am running Vista 32 bit OS and trying to install iTunes but still get the following error;

  ' Microsoft.VC80.CRT.version = "8.0.50727.4053".Guy = "win32".publicKeyToken

  "="1fc8b3b9a1e18e3b".processorArchitecture ="x 86" also HRESULT:0x8007051A

  Some research has indicated that it was due to a problem of update?

  Then tried checking updates (Windows update), who does not ("" Windows could not search for new updates - errors found Code 8007051 A ' ")

  The "get help" link was as useless as an ashtray on a motorbike.

  Any help would be greatly appreciated

  Hi Discopossum,

   

  How long have you encountered this problem?

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: Try to install the program as an administrator do a right click on the program installation files and select run as administrator, click on continue if you are prompted to confirm.

  Method 3:  Clean boot the computer and then try to install ITunes

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 4:  Run the fixit available in the article below to reset the Windows Update components

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  If problems with iTunes didn't exist yet, contact the Apple Support
  http://www.Apple.com/support/iTunes/

• will not install windows update for Microsoft XML Core Services 4.0 Service Pack 2 (KB973688) 652 error code

  I tried several times without result

  Hello

  Method 1:

  Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update. Click on the link below and follow the instructions.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  Follow the instructions in the link below to rename software c:\windows\system32\catroot and distribution records and try to install the updates.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Method 3:

  You can download the stand-alone packages updates and then try to install manually. Check if you get the same error message.

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=00bcdf28-2299-4150-964d-88a601e25229

  Hope that information was useful

• Creative office cloud app will not update - Windows 7 Pro?

  Whenever I boot Windows 7, I get the following window:

  

  When I click on 'Install now' I get an error message. The CC icon is no longer on my desk. Is this a bug that I simply have to live with?

  Clinton

  Hi Clinton, could you please try that:

  Please uninstall CC Office and install again:

  1. go in Applications/Utilities/Adobe Installers and uninstall Creative Cloud desktop

  For Windows: Control Panel\Programs\Programs and features

  2. go in Applications/Utilities and find CC Office application folder and move it to the trash.

  For Windows, uninstall Office CC top App of: control Panel\Programs\Programs and features

  3. run the CC cleaning tool and search for any trace of AAM. If necessary withdraw:http://www.adobe.com/support/contact/cscleanertool.html

  4. go to Libraray/Application Support/Adobe/OOBE and rename to OOBE.old

  For Windows: C:\Program Files\Common Files\Adobe\OOBE to the OOBE 86 x. OLD

  5. download and install the CC Office since the indicated link:https://creative.adobe.com/products/creative-cloud

  Please let us know if it worked. You can contact the Support if necessary Adobe

  http://www.Adobe.com/in/company/contact.html

• HP Laserjet 3050 will not install on MacBook Pro Yosemite

  Cannot install the printer. Get the following error message:

  Cannot find the appropriate software after software update running. But the software appears in my updates?

  Thanks for your comments.

  Hello

  In the Apple menu click on App Store, and select software update.

  Click on the main menu of the Bank and then reload the page and install any update HP or Apple listed.

  Once you have finished, try to add the printer in Printers & Scanners again, then follow the update of the software once more to make sure that the latest drivers have been installed.

  Please check if this can work, if the same continues to try to install the drivers manually from the following link:

  http://support.Apple.com/kb/dl907

  Once you are done try once more adding the breeders & Scanners printer and check for the difference.

  Please let me know the results.

  Shlomi

• Presenter 10 will not install windows 7

  Installer kicks back an error message indicating presenter 10 or a preview version is already installed and must be removed before the installation of this media.

  9 is installed, but I can't find any version 10 to remove.

  Any help would be appreciated.

  Hi matthewr68238665,

  You can refer to this topic, where a user has experienced a similar problem: I can't install Presenter 10 because I get a message "a contradictory version or prelease... There are on this computer '.

  Let us know if this helps solve the problem.

  Best,

  Del